Sorry for the stupid question, but apparently, it hasn't been asked before...or I just couldn't find it.
Anyway, I've rooted my XT912 & flashed the PAC man ROM to it. I got that up and running just from lurking here. However, I don't know what to do with the gapps.
I went to goomanager, downloaded the most recent version, and then found it in file manager. But when I try to open it, I get a message reading that the file is too large. Am I doing something wrong?
Thanks for the help.
Sent from my DROID RAZR using xda app-developers app
I'm not running that ROM, (I'm running Avatar) but I would assume it's the same process.
Place the ZIP file on your SD card after downloading and flash it using a recovery (I use Boot menu Manager, but Safe Strap would work too).
Sent from my DROID RAZR Maxx using XDA Premium
Derick60 said:
Sorry for the stupid question, but apparently, it hasn't been asked before...or I just couldn't find it.
Anyway, I've rooted my XT912 & flashed the PAC man ROM to it. I got that up and running just from lurking here. However, I don't know what to do with the gapps.
I went to goomanager, downloaded the most recent version, and then found it in file manager. But when I try to open it, I get a message reading that the file is too large. Am I doing something wrong?
Thanks for the help.
Sent from my DROID RAZR using xda app-developers app
Click to expand...
Click to collapse
Here is a link to latest gApps, is what iam using with PACman VO2. http://db.tt/ivuAoCHf just flash this the same way you did PACman ROM..
Thanks for the help, I've got it up and running now. I had the wrong gapps package.
Sent from my XT912 using xda app-developers app
1droidmod said:
Here is a link to latest gApps, is what iam using with PACman VO2. http://db.tt/ivuAoCHf just flash this the same way you did PACman ROM..
Click to expand...
Click to collapse
You bet bud!! i do think goo could do a bit better as far as gApps management!!
Agreed, seems that Goo is a bit behind sometimes....
Sent from my XT912 using xda app-developers app
Related
My Photon is rooted, unlocked, CWM 5.0.2.8, Running CM 7 NIGHTLY 7/22. I wanted to switch to MIUI 2.7.27 Official Port for the Photon. Downloaded the Zip and GAPPS for the ROM, Nandroid Backup, Cleared Data/Factory Reset, Formated /Data, /System, /Cache, Cleared Delvik Cache and The Flashed The MIUI zip TWICE... went REALLY fast only showed MIUI Logo froze and then said rom completed. Flashed The Gapps and Rebooted... it stayed on the Motorola logo with Unlocked on the top for a whole day... i really want to switch to the MIUI Rom.... what am i doing wrong?
miui uses an installer that requires a rom to be installed on the phone. you wiped the system. don't wipe anything before installing. you can do that in the installer.
there are three files to flash. base, options then themes. it's a great rom. you'll enjoy it.
Sent from my MB855 using Tapatalk 2
So I download it from miui.us now what's the install process... its only one zip...
Bump... Anyone?
Sent from my MB855 using xda app-developers app
The zip on miui.us is only the ROM. You should be able to flash it but you have the wrong version of cwm. You need to have either jokers recovery v3, twrp, or cwm 5.0.2.7. 5.0.2.8 is from ROMmanager and doesn't work for any ics roms
sent from my MoPhoKing CMX MoPho
What is the recommended install? Kitchen sink does not react to touch...
Sent from my MB855 using xda app-developers app
Bump? If someone could tell me the best way to do this with my version of cement and the steps it would be much appreciated.
Sent from my MB855 using xda app-developers app
bradleymaustin said:
Bump? If someone could tell me the best way to do this with my version of cement and the steps it would be much appreciated.
Sent from my MB855 using xda app-developers app
Click to expand...
Click to collapse
Why don't you flash a rom that you can flash from CWM and then flash MIUI?
You could reinstall CM7 or AOKP.
Once installed run the MIUI installer (without wiping anything before starting the installer), and then install Gapps. You should then be good to go.
Also, I think you should spend some more time reading about what you're doing. It seems that you may be on the edge of not knowing what you're doing. I'd suggest (at a minimum) the first 3 posts in the MIUI thread should be understood in detail before doing this again.
In the stated version of cwm or do I need the old one
Sent from my MB855 using xda app-developers app
bradleymaustin said:
In the stated version of cwm or do I need the old one
Sent from my MB855 using xda app-developers app
Click to expand...
Click to collapse
I'm not sure. I run AOKP. I think if you've got jokers revision 3 of CWM that you're fine.
I'm on 5.0.2.7-photon3. I think you're one release newer, but make sure it's joker's version and you should be alright.
Check out qbking77 on YouTube. He has install vids for most of our roms.
sent from my MoPhoKing CMX MoPho
retailguy said:
I'm not sure. I run AOKP. I think if you've got jokers revision 3 of CWM that you're fine.
I'm on 5.0.2.7-photon3. I think you're one release newer, but make sure it's joker's version and you should be alright.
Click to expand...
Click to collapse
I'm on the rommanager version... 5.0.2.8
Sent from my MB855 using xda app-developers app
bradleymaustin said:
I'm on the rommanager version... 5.0.2.8
Sent from my MB855 using xda app-developers app
Click to expand...
Click to collapse
I wouldn't use that. Watch QBKing77's video. He'll walk you through it. I'd put CM7 back on and go from there.
His directions are awesome. That was a good idea!
I did use those walkthroughs.... no luck... only difference is the cwm version l
Sent from my MB855 using xda app-developers app
Problem chose older version of cwm known to work yet the display is all jacked up.
Sent from my MB855 using xda app-developers app
Get jokers recovery from Jokersax.com it "should" solve your issues
sent from my MoPhoKing CMX MoPho
Those looking for a custom rom based off of stock firmware with extra tools to the user, check it out at phandroid.
http://androidforums.com/bionx/608759-droid-razr-cdma-rom-bionx-series-nx-rom-stable.html
Any questions, comments, concerns... Either post at phandroid or PM me, i dont usually hang around xda that much.
Sent from my DROID RAZR using xda app-developers app
rgocal said:
Those looking for a custom rom based off of stock firmware with extra tools to the user, check it out at phandroid.
http://androidforums.com/bionx/608759-droid-razr-cdma-rom-bionx-series-nx-rom-stable.html
Any questions, comments, concerns... Either post at phandroid or PM me, i dont usually hang around xda that much.
Sent from my DROID RAZR using xda app-developers app
Click to expand...
Click to collapse
Sounds promising, I'd like to give it a shot but I need working GSM Patch
yeah gsm compability is crucial
Sent from my XT910 using xda premium
Il see if i can manage some time to make a seperate rom, if not itl b up to the user to apply the patches since their flashable. The rom does have ota updates enabled so gsm users would have to watch
Sent from my DROID RAZR using xda app-developers app
V 1.2 is now available
Sent from my DROID RAZR using xda app-developers app
rgocal said:
V 1.2 is now available
Sent from my DROID RAZR using xda app-developers app
Click to expand...
Click to collapse
its a lovely rom :good:
it works on Xt910 with GSM patch but reboots many times
la121mo said:
its a lovely rom :good:
it works on Xt910 with GSM patch but reboots many times
Click to expand...
Click to collapse
And what about battery life?
Sent from my XT910 using xda premium
Jack'O said:
And what about battery life?
Sent from my XT910 using xda premium
Click to expand...
Click to collapse
i didn't spend to much time on the rom.but it seem to be better than the stock.
Tried to install via Safestrap but i think to miss something. Installed after enebled Safestrap, flashed gsm patch before to reboot and i got black screen after the first static moto logo.
Someone can suggest something?
Edit: Maybe it's due to this thing (will retry):
OH!! And never try to boot into recovery with the device plugged in, you will get nothing but a black screen.
Click to expand...
Click to collapse
from http://www.droidrzr.com/index.php/topic/3108-safestrap-use-and-install-instructions-wdownload-link/
Oh, and I didn't format /system, is it necessary to create the fylesystem?
Edit2: Nope, wiped, formatted system without cable but same black screen (phone off).
Sent from my XT910 using xda premium
Jack'O said:
Tried to install via Safestrap but i think to miss something. Installed after enebled Safestrap, flashed gsm patch before to reboot and i got black screen after the first static moto logo.
Someone can suggest something?
Edit: Maybe it's due to this thing (will retry):
from http://www.droidrzr.com/index.php/topic/3108-safestrap-use-and-install-instructions-wdownload-link/
Oh, and I didn't format /system, is it necessary to create the fylesystem?
Edit2: Nope, wiped, formatted system without cable but same black screen (phone off).
Sent from my XT910 using xda premium
Click to expand...
Click to collapse
From your wording it sounds as if you flashed the GSM patch & rebooted before you flashed the rom. If that's the case, you're booting into an empty partition. You have to have something on the safe side to boot into before attempting to power up into that side.
Sent from my XT912 using Tapatalk 2
On GSM you ONLY can boot DHackers Roms with Safestrap. Regular Roms won't boot.
You have to use Boot Menu and convert the Rom.
Sent from my XT910
Is this compatible with the 215 upsate?????
Sent from my DROID RAZR using xda app-developers app
HSD-Pilot said:
On GSM you ONLY can boot DHackers Roms with Safestrap. Regular Roms won't boot.
You have to use Boot Menu and convert the Rom.
Sent from my XT910
Click to expand...
Click to collapse
But I seems that just you sayd you've tried out this rom with the patch. Can't search so much atm cause I'm at work.
My mistake, you sayd about BioniX.
Sent from my XT910 using xda premium
You can run it with the Patch, realy no Problem. But yoy can't use Safestrap to flash Roms. None of the usual Roms will boot by using Safestrap XT910. I tried different ways and Roms. It seems like it's just developed for KeXec.
Sent from my XT910
---------- Post added at 06:54 AM ---------- Previous post was at 06:53 AM ----------
http://forum.xda-developers.com/showthread.php?p=31664618
Search 4 you
Sent from my XT910
Jack'O said:
But I seems that just you sayd you've tried out this rom with the patch. Can't search so much atm cause I'm at work.
My mistake, you sayd about BioniX.
Sent from my XT910 using xda premium
Click to expand...
Click to collapse
:good: I tried HSD-Pilot's way and rom works correctly now. :good:
Do these steps:
convert nxrom by boot manager(thick all parts specially the last one)
download eclipse gsm patch and put it in SD card
go to recovery
do full wipe(data and cache)
install the rom
install the gsm patch TWICE
reboot
after long booting do first initial setup and reboot.
you will find everything works perfectly.
Will try. Just a question about Safestrap: is it ok that when wipe data and caches in safe mode, i got my unsafe os factory setted?
Sent from my XT910 using xda premium
Jack'O said:
Will try. Just a question about Safestrap: is it ok that when wipe data and caches in safe mode, i got my unsafe os factory setted?
Sent from my XT910 using xda premium
Click to expand...
Click to collapse
I don't know.
and I'm interesting others answer.
When you wipe data on safe system your non-safe system won't get touched. So when you toggle back to non safe, all your apps and settings will still be there.
Sent from my XT910
But that's appened here. Just installed NX as second system, can't dowload or install anything becouse of "No enought space". How to verify where both os are installed on?
Sent from my XT910 using xda premium
You where asking about safestrap (Safe & Non-safe)
But i guess you used BM and didn't format the Webtop partition. If you did it, then you have to many Apps installed, because the Webtop only got around 1,5gb Space. If you need more then you have to use your Main System for the BionX Rom.
Sent from my XT910
I've recently switch from paranoid android to blackstar (. missed s memo) and have been having issues with adobe flash not properly loading.
Can anyone help me out.
Sent from my SAMSUNG-SGH-I717 using xda app-developers app
I'm having the same problem. I can't get flash to work on any jb roms. It's working fine on ics though.
Sent from my SAMSUNG-SGH-I717 using xda premium
Try this....
http://forum.xda-developers.com/showthread.php?t=1774336
xsessive said:
I've recently switch from paranoid android to blackstar (. missed s memo) and have been having issues with adobe flash not properly loading.
Can anyone help me out.
Sent from my SAMSUNG-SGH-I717 using xda app-developers app
Click to expand...
Click to collapse
I did titanium backup on blackstar and it works for me. Plus its not JB. So since you aren't on JB you don't need to follow above link. I would uninstall and do it again. Did you full wipe and all that jazz before flashing blackstar?
Hope you figure it out. Post up your solution should you fix it.
Sent from my SAMSUNG-SGH-I717 using xda premium
I did titanium backup but not for adobe flash since i was on jb and wanst using it the.
I got the apk from xda and its not loading at all.
Yes i did do all the via rom manager.
Any other ideas or am i screwed?
Sent from my SAMSUNG-SGH-I717 using xda app-developers app
Got same problem, after tried to install CM10, every subsequent JB install are slow and not responding, ICS find though.
Any idea?
xsessive said:
I did titanium backup but not for adobe flash since i was on jb and wanst using it the.
I got the apk from xda and its not loading at all.
Yes i did do all the via rom manager.
Any other ideas or am i screwed?
Sent from my SAMSUNG-SGH-I717 using xda app-developers app
Click to expand...
Click to collapse
i googled flash 11.1 apk and found a download thru a developer. I guess its not being supported? I just use a file manager to reinstall
525iEnjoy said:
i googled flash 11.1 apk and found a download thru a developer. I guess its not being supported? I just use a file manager to reinstall
Click to expand...
Click to collapse
Did installing the flash 11.1 apk fix the issue? Please advise.
Cheers
sunariod said:
Did installing the flash 11.1 apk fix the issue? Please advise.
Cheers
Click to expand...
Click to collapse
. I did have it loaded on a Jelly Bean rom and ICS. I am not the one with an issue. I was just replying that you can load onto jelly bean
ok so i have been having problems with everything force closing so i have been having to flash recently. recently every time i flash i odin and wipe internal. well today i flashed the latest official slim bean well i tried flashing regular jellybean gapps 4.2 and then justunbean inverted gapps. when i told it to reboot it went back to recovery and displayed installation aborted status 0.
Its a recovery mismatch. Also a 4.2 slimbean hasn't been released yet, use the 4.1.2 gapps from slim downloads.
Would you prefer my usual method of conflict resolution?
I thought 4.2 gapps was the gapps that has the new camera and and the swipe like keyboard. I've used it on cyanogen mod official cm10. So if its a recovery mismatch what would I need to do to fix it?
Sent from my SGH-T959 using xda app-developers app
I saw you posted on slim thread, did you get it fixed?
Are you running slim 4.2 that just came out?
Would you prefer my usual method of conflict resolution?
samsgun357 said:
I saw you posted on slim thread, did you get it fixed?
Are you running slim 4.2 that just came out?
Would you prefer my usual method of conflict resolution?
Click to expand...
Click to collapse
Actually I'm not. I'm running jellybean slim 4.1. I am grateful that they've been helpful on that thread. No I haven't gotten it fixed. Ive been trying to run the justunbean mod for 4.1 and I still can't get it to work. For right now though I'm running slim inverted apps till I can figure it out.
Sent from my SGH-T959 using xda app-developers app
I have one problem with Justin's... If you flash it, the phone. apk disappears. Have you used both gapps ? Step#1 followed by step#2
Sent from my SB4.2
Dougfresh said:
I have one problem with Justin's... If you flash it, the phone. apk disappears. Have you used both gapps ? Step#1 followed by step#2
Sent from my SB4.2
Click to expand...
Click to collapse
Step #1 and step#2 is for jelly 4.2 whereas I'm running 4.1 because I'm required by my parents to have a build that's at least in beats close to bring officially. I've met had that problem with just unbean before though
Sent from my SGH-T959 using xda app-developers app
You're holding your phone wrong hihi.I always replace the Contacts. apk and blast successfully
Sent from my SGH-T959 using xda app-developers app
Dougfresh said:
You're holding your phone wrong hihi.I always replace the Contacts. apk and blast successfully
Sent from my SGH-T959 using xda app-developers app
Click to expand...
Click to collapse
What does replacing the contacts to for it?
Sent from my SGH-T959 using xda app-developers app
I have a Droid Razr Xt912 with SS 3.1.1 installed. i was wondering can I install Pac v4.0 and if so ho do i go about doing that?
flash it on slot 2 flash ROM first then gapps
There's a pretty extensive thread under the Development forum. Just look at the first post and follow the directions from surdu EXACTLY. He's detailed very well what to do & how to do it. Good luck, it's a fantastic ROM. After that, check out the JBX Hybrid kernel by dtrail1.
In the forum it says to download a Google gapps but when I searched for it on the site there were 9 different ones which one should I use?
Sent from my DROID RAZR using xda app-developers app
seand88 said:
In the forum it says to download a Google gapps but when I searched for it on the site there were 9 different ones which one should I use?
Sent from my DROID RAZR using xda app-developers app
Click to expand...
Click to collapse
Hello there,it says in OP:
* download and install Gogle Gapps 20130301
So you should look for that file among the others when you click on that link,should be somewhere in the middle,cheers!
Sent from my XT910 using xda premium