Phone will no longer turn on after flashing Rom - Galaxy S III Q&A, Help & Troubleshooting

I just tried flashing Android Revolution to my phone. I went through the whole set up process. Went to reboot then it went blank. Nothing. I get nothing when I plug it in. The computer doesn't recognize any device attached to it. I've tried removing the battery. If I leave the battery out for an extended period of time, when I place it back in the phone, my camera flash flashes really quick then back to nothing. It's as if the phone is completely dead. When I flashed the rom my battery was at 90%. I've used various roms on different phones and this was the first time I did it to my Galaxy s3 and this is the first time it's ever happened. Talk about frustrating. Any help would be appreciated but I'm not holding my breath. It doesn't look good.

Congratulations!
You're phone is now a piece of brick!
Board failure!
If your phone goes to download mode you can repair it by jtag and if it doesn't power on anyway and it's still under warranty, you can ask them to change your phone or repair that.
Cause there's no way to understand you've installed a custom os
Sent from my GT-I9300 using Tapatalk 2

Recovery? Download mode? . Access able?

lokitsar said:
I just tried flashing Android Revolution to my phone. I went through the whole set up process. Went to reboot then it went blank. Nothing. I get nothing when I plug it in. The computer doesn't recognize any device attached to it. I've tried removing the battery. If I leave the battery out for an extended period of time, when I place it back in the phone, my camera flash flashes really quick then back to nothing. It's as if the phone is completely dead. When I flashed the rom my battery was at 90%. I've used various roms on different phones and this was the first time I did it to my Galaxy s3 and this is the first time it's ever happened. Talk about frustrating. Any help would be appreciated but I'm not holding my breath. It doesn't look good.
Click to expand...
Click to collapse
Charge battery /try another battery first .
Then give details of the problem .
jje

No download mode
No, it won’t go to download mode. I'll try the alternate battery. Thanks for the information guys.

Did you flash the right phone ROM?

Yes
aznflawless said:
Did you flash the right phone ROM?
Click to expand...
Click to collapse
Fairly certain I did but I'm pretty sure it's a moot point now. If I could get any sign of life, I'd use Odin to unbrick and go back to stock. Anyhow for now, it makes a great paper weight.

Related

Can't get to download screen. Bricked?

I was trying to use odin to get back to a stock rom (UVJFD). Phone was in download, odin was running. Odin suddenly said "not connected" and nothing was listed where com is usually displayed. I unplugged my phone and it immediately displayed a phone, exclamation, computer.
I tried the three button reboot, but it immediately went back to this screen. I've tried all of the options in the 'So you've bricked your phone' stickey, except the soldering method and I can't get it to do ANYTHING.
What do I do? I'm trying to get back to factory. At this point, I may need to send it in.
Just do what you would normally do to get back to download mode. I can't specifically remember the buttons but just jeep trying until it shows up on odin.
Actually I read somewhere that the phone "!" Cpu means that it will already work with odin so I guess try that. Im not certain that it will work immediately. If that doesn't work then do what I said first lol. Don't worry its not bricked this happened to me the day I got my phone hahaha
Sent from my SGH-T959 using XDA App
Phone....!.....PC is just like download mode. I was able to recover from it, when it happened to mine. Maybe the JFD you had was faulty?
But ODIN should recognize your phone.
Completely bricked?
shelbydz wrote: I tried the three button reboot, but it immediately went back to this screen
Click to expand...
Click to collapse
Does that imply that you saw some sort of life in the screen such as any light on the display? If that is the case it is probably worth trying the 301k Resistor method to get to the download screen.
On the other hand if your phone is exactly in the same shape as my phone is then I really feel for you. My screen never shows any life. It appears like the battery is dead and I've tried everything and I know the battery is fully charged.
So my next step is either finding someone with a jtag interface or send it off for repair.
Anyone have suggestions in that next step? Any weekend warriors with a jtag interface where we can send it? Any suggestions as to where to send it (t-mobile is not an option since I'm not using t-mobile)
It keeps rebooting to the icon screen (phone ! computer). I tried plugging it back in, but odin didn't see it.
I'll have to play around with it a bit more to see if I can get it to work.
thx
shelbydz said:
It keeps rebooting to the icon screen (phone ! computer). I tried plugging it back in, but odin didn't see it.
I'll have to play around with it a bit more to see if I can get it to work.
thx
Click to expand...
Click to collapse
Odin should recognize it, try using a different ODIN. Make sure ODIN is running first, with the proper files already loaded "PDA, MODEM, CSC" then plug in phone.
that seemed to work. (loading the files to odin, then connecting) Apparently I had a bad ROM image. It's booting up now.
Thanks for all of the help.

[Q] I need some serious help/guidance!

It all started when i tried to root my Samsung Galaxy S2.
I tought it was to confusing to use the long way of rooting so i used to supercurio auto root kernel. I followed the instructions and everything went fine, but when the phone rebooted (like it said it would) it got frozen at the Yellow Triangle boot screen. After this i tried to flash many different kernels without luck, i tried to flash firmware roms aswell but that didn't work either.
The battery seems to be depleted and there is no way for me to open the Download Mode.
Im really new to the android world and i would be the happiest man in the world if i could possibly get the right answers.
P.s! When my phone actually had battery i couldn't open the Recovery Mode
No download mode then you need the USB recovery jig ebay/Google .
With a charged battery .
jje
But i can't charge it since the phone is stuck at the empty battery icon with the looping circle in it (which is stuck aswell). The phone just gets hotter when i try to charge it but i doesn't do any good at all
I think you'll just have to buy a jig and find a way to charge the battery again.
Maybe you can try a full battery from a friend?
Or charges yours in the Galaxy S II of a friend.
After that just try to reflash en wipe everything in cwm.
Good luck!
OKey, thanks for the reply but what does the USB jig really do? I have heard that it only boots the phone into download mode. But even if that works it still wont get the phone to operate as it should since i tried to flash different kernels before when i had battery left.
If i charge the phone right now, it will first show me the empty battery and then it just reboots back to the battery icon. If i press Volume down - Home - Power button it just says that i have to low battery and that it wont go into download mode. Recovery mode has not worked since the first time i tried to flash to Supercurio's auto kernel.
Plz help!
The experts should explain it better but the jig I think allows you to write data directly to the nand. There should be external chargers for the s2, you could try searching for that too.
I suppose what you should take away from this is that it pays to avoid shortcuts. I'm pretty sure it says on the cf thread that the auto root doesn't work on the phone.
Sent from my GT-I9100 using XDA App
Maybe you should try once more flashing a complete stock rom with repartion and pit.
A jig just puts your device into download mode.
It is very cheap on Ebay.
I don't think it is smart to try charging.
I once had a problem like this with the original Galaxy S .
I went to shop where I bought the phone and asked for a battery.
Just try to get a full battery and jig.
I think that is your only chance...
Good luck!
Have you tried letting it charge for some while? The S2 gets a little hot when charging so thats probably not a problem, if i were you i would let it charge for an hour or so and then try to enter download mode again
Thanks but if i plug the phone in with the charger nothing really happens. On the screen it's just a empty battery and within that battery there is some kind of circle that should be swirling but it is frozen, therefor i dont think the phone is actually getting any power...
Even if i set it up with a USB jig and a new battery, what kind of kernel should i use? And should i flash it with a new firmware?
I really have no clue on this one.
The phone only reacts to the button combination regarding download mode, but whilst in there it just says "low battery !! Can't download !!" and that's it.
Any more advices? I will die of happiness if someone helps me with this!
Thanks.
Looks like you need a service centre
or flash stock rom via Odin after accessing download mode via buttons or recovery jig .
You dont want a kernel you want full new stock firmware .
jje
Yea i got that now, but i live in sweden and before all of this i tried the swedish firmware version and it just says FAIL! in Odin.. im sure it would work out if i could get the firmware to reset the phone, which it does right? I guess i should fix me a battery since it seems i can't charge it properly. Any one who could explain it more detailed? It would help me alot.

[Q] Htc Nexus one hard bricked?

Hi there!
This thread is my last hope, so please dont let me down folks...:cyclops:
The story short - one sunny morning i turned on my HTC Nexus One and it got stuck with te X on the screen for about 15 minutes, non of the buttons responded, so i did the first thing that came in my mind - i pulled out the battery. After inserting the battery the phone went full brick, i mean literally, no reaction on anything, even conected to the wall charger, there is no sign of life, no charging LED, nothing. Connected to the PC, it says USB device not recognised.
I dont think this is a hardware proble, the phone workwd fine until this interrupted power on. Phone runned on stock Androud, i have not played aroun with it - no bootloader unlock, no rooting.
I searched the internet for a solution, tried a lot of button combinations like in this thread:
http://forum.xda-developers.com/showthread.php?t=1069032
but still no luck, i cannot restore or flash it while my PC does not recognise the phone.
Found some info about those Usb Jig things, but they work only on Samsung phones, so, is there a way to force the phone to go in recovery mode, or give any sign of life so i can try to recover it or flash a diferent ROM?
The warranty has ended, so no hope there.
Hope there is a way out of this, and, sory for my bad english. :good:
Veesais said:
Hi there!
This thread is my last hope, so please dont let me down folks...:cyclops:
The story short - one sunny morning i turned on my HTC Nexus One and it got stuck with te X on the screen for about 15 minutes, non of the buttons responded, so i did the first thing that came in my mind - i pulled out the battery. After inserting the battery the phone went full brick, i mean literally, no reaction on anything, even conected to the wall charger, there is no sign of life, no charging LED, nothing. Connected to the PC, it says USB device not recognised.
I dont think this is a hardware proble, the phone workwd fine until this interrupted power on. Phone runned on stock Androud, i have not played aroun with it - no bootloader unlock, no rooting.
I searched the internet for a solution, tried a lot of button combinations like in this thread:
http://forum.xda-developers.com/showthread.php?t=1069032
but still no luck, i cannot restore or flash it while my PC does not recognise the phone.
Found some info about those Usb Jig things, but they work only on Samsung phones, so, is there a way to force the phone to go in recovery mode, or give any sign of life so i can try to recover it or flash a diferent ROM?
The warranty has ended, so no hope there.
Hope there is a way out of this, and, sory for my bad english. :good:
Click to expand...
Click to collapse
Well no, bricked is a term used when you are rooted and flash a bad rom,kernel,etc. You have no root, so you cannot be "bricked". Just a software failure, you cannot flash another rom because, again, you have no root or custom recovery. Your best bet is trying to send it back to your carrier and get it replaced
ParanoidKang said:
Well no, bricked is a term used when you are rooted and flash a bad rom,kernel,etc. You have no root, so you cannot be "bricked". Just a software failure, you cannot flash another rom because, again, you have no root or custom recovery. Your best bet is trying to send it back to your carrier and get it replaced
Click to expand...
Click to collapse
The warranty time is out, so there is no help from the carrier, unless for cash...
But there must be a way to bring it back to life.
Veesais said:
The warranty time is out, so there is no help from the carrier, unless for cash...
But there must be a way to bring it back to life.
Click to expand...
Click to collapse
Now the screen may not show, but try booting into fastboot mode by press and hold the Trackball+Power buttons together.
I'm not sure about the nexus one, but newer nexus devices have factory images, supplied by Google. If they exist for the nexus one, you should be able to save your device by flashing them through fastboot. That is if the images exist and you can get to fastboot.
Sent from my Nexus 4 using XDA Premium 4 mobile app

[Q] Phone not booting/charging

Hey guys!
Today I flashed an early build of CM11 on my I9100 (http://forum.xda-developers.com/showthread.php?t=2523604).
Basically everything went fine, just a few smaller bugs.
But then my phone froze for 2 times so I had to hold down the power button until it shut down. At the first freeze it worked and I could restart my phone but at the second freeze I couldn't restart the phone anymore!
No matter what buttons I hold (power, up-power-home, down-power-home) it just stays black, not even the Samsung logo shows up. When I connect it to the charger the battery icon with the small circle inside appears for some seconds, then goes away, then comes back up and so on...
I really have no idea on what to do so I ask you guys if you have any suggestions
SOLVED: battery was broken
That doesn't look good Did it just froze on its own? Did you do something? Focus on getting to the download mode and flashing stock with odin, if you can't get in the download mode read some instructions for recovering a bricked I9100, you can probably find them at the development sections.
Dakura said:
That doesn't look good Did it just froze on its own? Did you do something? Focus on getting to the download mode and flashing stock with odin, if you can't get in the download mode read some instructions for recovering a bricked I9100, you can probably find them at the development sections.
Click to expand...
Click to collapse
I was just setting everything back up, as i wiped the data before flashing. Unfortunately I can't get in any mode But thank you for your answer, I'll search for bricked S2s
No problem, you can also put the battery out and wait for some time, sometimes it magically works
Dakura said:
No problem, you can also put the battery out and wait for some time, sometimes it magically works
Click to expand...
Click to collapse
Already tried that :/ No luck
But I don't think it's related to CM11 directly as it doesn't even get close to booting it.
Yep, you probably got a faulty bootloader or something, this is definitely above the ROM, but i think flashing with odin will solve it, so just try to get in download mode right now.
Just solved my problem
Seems like my battery was broken or something (I had the 2002mAh extended battery inside). I put back the original battery and the phone booted normally!

Frozen boot loop..frozen!? Tried everything..

Hey Guys, im desperate..
two days ago i charged my phone overnight as i normally do. Woke up and it was in SOD, which happens all the time (agni kernal, no fix yet).. Pulled the battery, but phone wouldnt boot. Turns out, it freezes during booting resulting in what appears to be a frozen boot loop.
Then i tried to plug it into my recharger, and it was showing a grey battery icon and was frozen on that screen always, the screen doesnt turn off, the battery icon isn't showing that its charging. doesnt change, just shows the same empty battery grey icon with the refresh circle-arrow in the middle.
I tried taking the battery out leaving it out for 5 minutes, draining the battery from the phone by holding the power button for 10 seconds, then trying to charge the phone. Same issue, only showing the grey battery icon when trying to charge and it never changes or goes away.
SO i tried to boot up the phone, but it wont go past the samsung text logo.
I tried entering recovery, but it just freezes on the samsung text logo.
I can not enter download mode either. So ihave no way to run odin from what i can tell.
Im losing my mind here, ive tried almost everything i can think of. And would really appreciate any help on this. It feels like a hard core brick.. I LIVE on my phone due to work and im losing money every day i dont have it. DESPERATELY need this. HELP!!
DatacomGuy,
A usb jig will probably be able to force the phone into download mode again so you can restore it with Odin. If you're up to it, you can do a Google search to get instructions on how to make your own.... or you can buy one online pretty cheap. Here's one on eBay (USB JIG) that looks good with good feedback from the seller.
Thank you.. Ill order one today and report back.
What could have gone wrong you guys think? How did the phone just do this?
I guess no way to get my pics off huh?
I hope the jig will work for you so you can restore the phone back to stock 4.1.2 and start over fresh.
I'm not sure what would have caused the phone to have started boot looping like that. My guess would be that something got corrupted.
There's a thread in the general section on how to Odin flash the stock recovery onto the phone so you can wipe cache and do a factory reset.... (EDIT: Click here to go to the thread) . This is a long shot, but if you can get the phone back into download mode with the jig, you could try installing the stock recovery and just wiping cache without doing the factory reset... then see if you can get the phone to boot up so you can recover stuff off of it.
As far as the pictures go, they may have been saved to the external sd card. You could pop the sd card into another phone if you've got another functioning phone laying around... or use a sd card adapter to mount it straight onto your computer so you can check.
The jig did the trick.. thank god..
The flashing stock recovery did not work. I ended up going back to stock firmware.. 4.1.2 i think..
Thank God i have this back.. Thanks SO much for your help.
DatacomGuy said:
The jig did the trick.. thank god..
The flashing stock recovery did not work. I ended up going back to stock firmware.. 4.1.2 i think..
Thank God i have this back.. Thanks SO much for your help.
Click to expand...
Click to collapse
That's great to hear. Too bad the stock recovery didn't work, but I'm glad the jig worked and you were able to fix your phone. :thumbup:

Categories

Resources