I'm trying to install androwook on my prime, but it has failed twice now and I'm not sure what I'm doing wrong.
-I rooted after the OTA JB update so I have the JB bootloader
-I was coming from Energy Rom
-I wiped system, data, dalvik, and cache
I'm wondering if maybe I wiped too many things? Is that what I did wrong?
I got through installing androwook, and it said it was successfully installed. When I went to reboot I was just stuck on the asus splash screen. I got it to boot into recovery and I'm restoring now.
What am I doing wrong? Any idea why I can't get androwook to work? Thanks.
dag1337 said:
I'm trying to install androwook on my prime, but it has failed twice now and I'm not sure what I'm doing wrong.
-I rooted after the OTA JB update so I have the JB bootloader
-I was coming from Energy Rom
-I wiped system, data, dalvik, and cache
I'm wondering if maybe I wiped too many things? Is that what I did wrong?
I got through installing androwook, and it said it was successfully installed. When I went to reboot I was just stuck on the asus splash screen. I got it to boot into recovery and I'm restoring now.
What am I doing wrong? Any idea why I can't get androwook to work? Thanks.
Click to expand...
Click to collapse
you should be able to wipe everything except for the location of the rom and your backups. What version of twrp are you using?
dag1337 said:
I'm trying to install androwook on my prime, but it has failed twice now and I'm not sure what I'm doing wrong.
-I rooted after the OTA JB update so I have the JB bootloader
-I was coming from Energy Rom
-I wiped system, data, dalvik, and cache
I'm wondering if maybe I wiped too many things? Is that what I did wrong?
I got through installing androwook, and it said it was successfully installed. When I went to reboot I was just stuck on the asus splash screen. I got it to boot into recovery and I'm restoring now.
What am I doing wrong? Any idea why I can't get androwook to work? Thanks.
Click to expand...
Click to collapse
Im having the same issue. After installing hair bean and pressing reboot, above the confirmation it says no OS ddetected. I am able to flash another rom Once i enter back into recovery though.
dag1337 said:
I'm trying to install androwook on my prime, but it has failed twice now and I'm not sure what I'm doing wrong.
-I rooted after the OTA JB update so I have the JB bootloader
-I was coming from Energy Rom
-I wiped system, data, dalvik, and cache
I'm wondering if maybe I wiped too many things? Is that what I did wrong?
I got through installing androwook, and it said it was successfully installed. When I went to reboot I was just stuck on the asus splash screen. I got it to boot into recovery and I'm restoring now.
What am I doing wrong? Any idea why I can't get androwook to work? Thanks.
Click to expand...
Click to collapse
Just follow these steps exactly. Google search the necessary files. I was able to get it
http://forum.xda-developers.com/showthread.php?t=1674827&page=623
geoygarza said:
Just follow these steps exactly. Google search the necessary files. I was able to get it
http://forum.xda-developers.com/showthread.php?t=1674827&page=623
Click to expand...
Click to collapse
Are you trying to link to this post ? http://forum.xda-developers.com/showpost.php?p=34938455&postcount=6212
Related
I've been shuffling through threads for the past 2 days trying to find a fix a no luck yet so i'm making my own noob post.
yesterday after flashing CM7 to my atrix, I was trying to install the Gapps package and after that install my phone wont boot past the logo screen.
Im still able to access fastboot and get into android recovery. I've tried to wipe everything and reinstall cm7 but still nothing.
i read that some people were able to get this issue resolved using command prompt and fastboot commands, but im totally lost when it comes to command prompt and couldn't get working correctly.
any suggestions or fixes would be greatly appreciated
DThimself said:
I've been shuffling through threads for the past 2 days trying to find a fix a no luck yet so i'm making my own noob post.
yesterday after flashing CM7 to my atrix, I was trying to install the Gapps package and after that install my phone wont boot past the logo screen.
Im still able to access fastboot and get into android recovery. I've tried to wipe everything and reinstall cm7 but still nothing.
i read that some people were able to get this issue resolved using command prompt and fastboot commands, but im totally lost when it comes to command prompt and couldn't get working correctly.
any suggestions or fixes would be greatly appreciated
Click to expand...
Click to collapse
Just to be clear:
1. You successfully booted into CM7 after installing it? Then you went to install gapps and couldn't get past the boot logo?
2. Or were you trying to install gapps right after flashing CM7 (i.e. stayed in recovery and did not boot into OS)?
i Successfully booted into cm7 then went back into recovery to install the gapps package and after that install it wouldnt boot past the logo
DThimself said:
i Successfully booted into cm7 then went back into recovery to install the gapps package and after that install it wouldnt boot past the logo
Click to expand...
Click to collapse
Hmm, well that definitely rules out an outdated recovery, which is what usually causes people to get stuck at the bootlogo. If you can't even re-install after wiping, then I would just restore a backup and start over.
Maybe try getting a fresh download of the gapps package. You may have possibly had a corrupted download?
Are you running CWM recovery or Rom Racer's? I had a problem where I was stuck at the boot logo while using CWM (latest one) but when I switched to Rom Racer's recovery and flashed everything worked.
I ended up having to use an older CWM recovery and wiping the phone and SD card with a lot of help from a friend of mine whos knows more about this than i do
DThimself said:
i Successfully booted into cm7 then went back into recovery to install the gapps package and after that install it wouldnt boot past the logo
Click to expand...
Click to collapse
How did you prep for the CM7 and GAPPS flash? If you did not wipe correctly, there was a first indication you might have problems.
How long did you wait after the phone first booted into CM7? If you rebooted as soon as the OS was up, that's more than likely your issue. You need to wait 10 minutes to let the phone build system files after flashing.
Also, an older CWM would have, if anything, caused more problems. If you had the latest ROM Manager or Romracer CWM then that was definitely not your problem, so your friend using an "older" CWM wasn't helping any.
DThimself said:
I've been shuffling through threads for the past 2 days trying to find a fix a no luck yet so i'm making my own noob post.
yesterday after flashing CM7 to my atrix, I was trying to install the Gapps package and after that install my phone wont boot past the logo screen.
Im still able to access fastboot and get into android recovery. I've tried to wipe everything and reinstall cm7 but still nothing.
i read that some people were able to get this issue resolved using command prompt and fastboot commands, but im totally lost when it comes to command prompt and couldn't get working correctly.
any suggestions or fixes would be greatly appreciated
Click to expand...
Click to collapse
I have run into this issue before when flashing any apps that update an app that is already there. I have found that a Dalvik wipe is needed before the flash. It is good practice to wipe Dalvik at least when flashing anything that changes the System Files. I also wipe the cache Partition before any flashes just to help mitigate issues like this.
I wanted to install a custom ROM for my TF201. So I downloaded the Energy ROM and placed it within the SD Card as update.zip
I flashed CWM and ran the Asus Bootloader Unlocker.
Then using Rom Manager rebooted into CWM, following on screen prompts I installed from SD Card the ROM. The install completeted successfully, the tablet restarted and showed the Eee Pad logo, but got stuck. I've tried cold booting from recovery mode, tried reinstalling the ROM but nothing is working. It is refusing to boot up properly.
Have I bricked the tablet, if so how do I fix it if at all possible?
geon106 said:
I wanted to install a custom ROM for my TF201. So I downloaded the Energy ROM and placed it within the SD Card as update.zip
I flashed CWM and ran the Asus Bootloader Unlocker.
Then using Rom Manager rebooted into CWM, following on screen prompts I installed from SD Card the ROM. The install completeted successfully, the tablet restarted and showed the Eee Pad logo, but got stuck. I've tried cold booting from recovery mode, tried reinstalling the ROM but nothing is working. It is refusing to boot up properly.
Have I bricked the tablet, if so how do I fix it if at all possible?
Click to expand...
Click to collapse
Did you do an MD5sum check on your download? Also have you tried flashing another rom? And my third and final question did you wipe Dalvik cache, cache, and factory reset before you installed?
And this is more of a preference thing but I'd suggest TWRP over CWM. I've had issues on other devices with CWM but TWRP on the Prime is perfect.
McJesus15 said:
Did you do an MD5sum check on your download? Also have you tried flashing another rom? And my third and final question did you wipe Dalvik cache, cache, and factory reset before you installed?
And this is more of a preference thing but I'd suggest TWRP over CWM. I've had issues on other devices with CWM but TWRP on the Prime is perfect.
Click to expand...
Click to collapse
I did a factory reset, then selected wipe Dalvik cache and cache.
How would I flash another ROM? I'm not sure how I can get another ROM onto the device as CWM cannot search external storage, only internal?
I was going to use TWRP but wasn't sure how to get it flashed onto the device, where as CWM was simpler. I didn't do an MD5 check on the ROM
EDIT:
Just tried using Fastboot USB to flash the official ASUS ROM(Tried latest JB and ICS 4.0.3), both write to the device okay but both fail
It says "FAILED <Remote: <>"
On the device it shows: Failed to process command flash:system error(0x170003)
geon106 said:
I did a factory reset, then selected wipe Dalvik cache and cache.
How would I flash another ROM? I'm not sure how I can get another ROM onto the device as CWM cannot search external storage, only internal?
I was going to use TWRP but wasn't sure how to get it flashed onto the device, where as CWM was simpler. I didn't do an MD5 check on the ROM
EDIT:
Just tried using Fastboot USB to flash the official ASUS ROM(Tried latest JB and ICS 4.0.3), both write to the device okay but both fail
It says "FAILED <Remote: <>"
On the device it shows: Failed to process command flash:system error(0x170003)
Click to expand...
Click to collapse
IT LIVES!!!
Don't know how I did it, but I managed to get TWRP installed on it. Using Fastboot somehow or ADB. It booted into TWRP and mounted external SD card, then flashed an official JB ROM(the Prime was on ICS before) and it has now booted up fine
I will now try and re-flash a custom ROM again(a different one) using TWRP but it is all looking superb
I was worried i'd have to claim on the extended insurance I took out with the retailer
Yesterday I tried to flash AndroWook Hairy Bean 1.4 using TWRP v2.2.2.0. The flash said it was successful, but upon booting up the device hangs at the Asus splash screen (the one with Eee Pad on it).
No errors are encountered on this screen. It just says, 'The device is unlocked'. I am able to access TWRP still and have tried flashing another ROM, Energy's latest JB ROM. However, I receive the same results with that one also.
I was a moron and neglected to do a backup. I did wipe the cache, dalvik cache and factory reset prior to flashing, but I also selected to wipe the system and I think that is were I f'd up.
How do I recover? I am very dependent upon this device and any help would be appreciated.
BialyMurzyn said:
Yesterday I tried to flash AndroWook Hairy Bean 1.4 using TWRP v2.2.2.0. The flash said it was successful, but upon booting up the device hangs at the Asus splash screen (the one with Eee Pad on it).
No errors are encountered on this screen. It just says, 'The device is unlocked'. I am able to access TWRP still and have tried flashing another ROM, Energy's latest JB ROM. However, I receive the same results with that one also.
I was a moron and neglected to do a backup. I did wipe the cache, dalvik cache and factory reset prior to flashing, but I also selected to wipe the system and I think that is were I f'd up.
How do I recover? I am very dependent upon this device and any help would be appreciated.
Click to expand...
Click to collapse
what recovery are you using? I had this problem this morning for a couple of hours. What ended up fixing it was pushing this http://forum.xda-developers.com/showpost.php?p=34359560&postcount=5497 via fastboot and using the new twrp to flash the rom. my twrp was not getting the job done. I wiped data also with the new twrp. No problems after that.
Hello.
I have only been able to install ViperX+ 1.08 ROM successfully. I wanted to experience other ROMs in comparison and have found ROMs specifically for this model, HTC One X Plus International, only to have them fail to fully install successfully. I have read up here on how to go about it and followed the steps dutifully but to no avail.
Does it make a difference on which Recovery you have installed for it to be successful or not? I currently have the latest TWRP 2.5.0.0 for my model. I have tried installing CyanogenMod and AOKP. CyanogenMod never makes it pass the installation because it fails right after attempting to install. AOKP installs but hang at the opening picture, and yes, I tried flashing the boot.img in Fastboot thinking that would solve it but it continued hanging anyway. Anyone have any help they can offer me? Thanks.
Jussi31 said:
Hello.
I have only been able to install ViperX+ 1.08 ROM successfully. I wanted to experience other ROMs in comparison and have found ROMs specifically for this model, HTC One X Plus International, only to have them fail to fully install successfully. I have read up here on how to go about it and followed the steps dutifully but to no avail.
Does it make a difference on which Recovery you have installed for it to be successful or not? I currently have the latest TWRP 2.5.0.0 for my model. I have tried installing CyanogenMod and AOKP. CyanogenMod never makes it pass the installation because it fails right after attempting to install. AOKP installs but hang at the opening picture, and yes, I tried flashing the boot.img in Fastboot thinking that would solve it but it continued hanging anyway. Anyone have any help they can offer me? Thanks.
Click to expand...
Click to collapse
The aokp uses the 4.2 kernal so you will have to instal that. But I'm not sure on the recovery .. maybe it might be worth trying clockwork as if the twrp you are useing is especially for the viper Rom? Have a go at installing the different recovery maybe that will help and double check what you have to do to install on the thread hope this helps
Ilike the viper Rom... But if I get time tomorrow I will try for myself ... If no one else helps you out by the time I do it I will update you on how I done it and any problems I faced maybe I will end up in the same situation.
Sent from my HTC One X+ using xda premium
Appreciate it. Insofar as the Recovery is concerned, the initial Recovery that I installed from the All-In-One kit when installing ViperX+ is different from the one I have now. Unless it is just a newer version, I now have Venom TWRP 2.5.0.0., just FTR. Thanks again, I will be interested to hear what happens for you.
Jussi31 said:
Appreciate it. Insofar as the Recovery is concerned, the initial Recovery that I installed from the All-In-One kit when installing ViperX+ is different from the one I have now. Unless it is just a newer version, I now have Venom TWRP 2.5.0.0., just FTR. Thanks again, I will be interested to hear what happens for you.
Click to expand...
Click to collapse
TWRP is the ideal solution for our HOX+ - at least as of now.
I hope you are doing the following:
1. Wiping Data & System.
2. Installing boot.img.
The Venom customized TWRP does not have any issues because I also used it for some time (as of now I am back on the official TWRP).
You can download the lastes verison from here:
http://techerrata.com/browse/twrp2/enrc2b
And install it using Hox+ All in one toolkit by hasoon.
Make sure you wipe data & system before you install the ROM.
I also changed from ViperX 1.08 to ARHD, InsertCoin & Elegancia.. no issues
Hmmm. I'll have to putz around with it some more and see what happens. Thanks.
Here's a brief summary of what I attempted to do.
I wiped Delvik Cache; I wiped Cache; I did Factory Reset; I wiped System.
Next I tried installing CyanogenMod and received the following error messages:
assert failed: getprop
E: error executing updater binary in zip
Error flashing zip
So I wiped everything again and tried installing AOKP. It successfully installs. I try rebooting prior to flashing boot.img. It hangs on horse picture opening screen. So I flash the boot.img in Fastboot and reboot after erasing cache. When rebooting it hangs on opening white screen.
I'm baffled. What am I doing wrong?
Jussi31 said:
Here's a brief summary of what I attempted to do.
I wiped Delvik Cache; I wiped Cache; I did Factory Reset; I wiped System.
Next I tried installing CyanogenMod and received the following error messages:
assert failed: getprop
E: error executing updater binary in zip
Error flashing zip
So I wiped everything again and tried installing AOKP. It successfully installs. I try rebooting prior to flashing boot.img. It hangs on horse picture opening screen. So I flash the boot.img in Fastboot and reboot after erasing cache. When rebooting it hangs on opening white screen.
I'm baffled. What am I doing wrong?
Click to expand...
Click to collapse
I guess your recovery is not able to detect that your phone is one x+.. that's why assert failed error.. try changing the recovery( maybe CWM) and try again
Through trial-and-error, and reading hard, I figured out I had to install a compatible Kernel. I then was able to install, successfully, AOKP and it seems to work very smoothly. I'm just learning the ins-and-outs of everything. Thanks for your help.
Jussi31 said:
Through trial-and-error, and reading hard, I figured out I had to install a compatible Kernel. I then was able to install, successfully, AOKP and it seems to work very smoothly. I'm just learning the ins-and-outs of everything. Thanks for your help.
Click to expand...
Click to collapse
:good::good::good:
that is cool!
So, I got annoyed with the speed of my 4.4 ROM and tried to install a new ROM. In the process of wiping davlik and cache, my TF201 hung and didn't do anything. After an hour, I hard rebooted it. Internal memory was totally wiped (including the ROM and Gapps, naturally) and I had to do a whole dance of trying to get the new ROM onto the SD card. After I did that, and installed a new ROM, it wouldn't install Gapps with an error saying it couldn't access the /data folder.
Even though the ROM install seemed to be successful, the tablet hangs on the splash screen ("unlocked" screen). I can access TWRP still, and I get a full fastboot menu.
Am I boned here?
markaments said:
So, I got annoyed with the speed of my 4.4 ROM and tried to install a new ROM. In the process of wiping davlik and cache, my TF201 hung and didn't do anything. After an hour, I hard rebooted it. Internal memory was totally wiped (including the ROM and Gapps, naturally) and I had to do a whole dance of trying to get the new ROM onto the SD card. After I did that, and installed a new ROM, it wouldn't install Gapps with an error saying it couldn't access the /data folder.
Even though the ROM install seemed to be successful, the tablet hangs on the splash screen ("unlocked" screen). I can access TWRP still, and I get a full fastboot menu.
Am I boned here?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2409602
Where it says to get the TF300 official firmware get the official TF201 Jellybean instead.
Follow all the instructions and you should be back to stock with no recovery. Then install the official TWRP for the TF201 and go from there.