I am suffering a case of search block - I am betting this has already been asked and hopefully answered.
1. I want to enable tethering without a tethering plan. I know all the warnings, but on occasion find this useful. Never more than a few minutes at a time. I don't want a tethering plan because I am unlimited now, though I will switch if they get me. Did this with WP7, are the instructions the same? link?
2. I really would like to reenable the switch that allows me to disable LTE. I find that LTE drains the battery too fast and if I am somewhere and need to squeeze a little extra out of the battery... particularly if on the edge of the LTE coverage area... don't get why at&t disables this ability.
Thanks!
Tethering plan? US carriers...
I think under settings > cellular there are new settings to "add internet apn" & "add mms apn". Not sure if you manually enter your APN, if it will create a new entry with default settings and allow tethering.
Warning: I have not tried this and it might not work and/or break your stuff requiring a reset.
Bjd223 said:
I think under settings > cellular there are new settings to "add internet apn" & "add mms apn". Not sure if you manually enter your APN, if it will create a new entry with default settings and allow tethering.
Warning: I have not tried this and it might not work and/or break your stuff requiring a reset.
Click to expand...
Click to collapse
APN and tethering are two separate things. AT&T puts a lock on the tethering where it "Phones" home to see if you have the plan. SO changing apn WONT work
I don't care about the tethering part since I have the shared data family plan that includes tethering, but I am interested in being able to disable LTE.
At work, I'm in a fringe area, so it'll keep switching between LTE and 4G. It gets full 4G bars but will hover around 0-1 LTE bars.
After the Portico update, ##3282 will get me into the data menu which has some settings to force 2G, 3G, and 4G, but I don't see anything that would disable LTE. If I force "3G", would it actually do "4G" since its all HSPA+?
mindfrost82 said:
I don't care about the tethering part since I have the shared data family plan that includes tethering, but I am interested in being able to disable LTE.
At work, I'm in a fringe area, so it'll keep switching between LTE and 4G. It gets full 4G bars but will hover around 0-1 LTE bars.
After the Portico update, ##3282 will get me into the data menu which has some settings to force 2G, 3G, and 4G, but I don't see anything that would disable LTE. If I force "3G", would it actually do "4G" since its all HSPA+?
Click to expand...
Click to collapse
http://forums.wpcentral.com/nokia-lumia-920/203675-turn-off-4g-lte-t-lumia-920-a.html This link gives all the information for turning off LTE. Since HSPA+ is actually just enhanced 3G signal, forcing 3G will still let you receive HSPA+ or what AT&T calls "4G"
hyelton said:
APN and tethering are two separate things. AT&T puts a lock on the tethering where it "Phones" home to see if you have the plan. SO changing apn WONT work
Click to expand...
Click to collapse
would love to find out if there is a way to prevent it from "phoning home". or even a way to redirect to another server that can give the proper "ok" to use tethering. It seems ridiculous that there isn't some way to go around this at&t check.
Related
Don't know if this has been posted before or not sorry if it has, I will not retype the post but here is the link: http://howardforums.com/showthread.php?t=1472011
Is it possible to make a program that when you click on it it changes the reg value to be able to switch to Roam Only and Back? I have no knowledge of doing this so I am asking
Thank you
What's wrong with choosing it from the Phone Settings menu (comm manager)? It's a few steps, but usually only takes me a few seconds.
smotrs said:
What's wrong with choosing it from the Phone Settings menu (comm manager)? It's a few steps, but usually only takes me a few seconds.
Click to expand...
Click to collapse
That allows roaming (if I understand the setting you are referring to) not forced Roaming, I live in a area where there is a hint of Sprint Signal there is a 5 bar presence from US Cellular but my handset keeps jumping to Sprint I miss calls etc
My Palm 800W had a setting that would select Roam Only since it appears that we know which reg entry that needs modified I was hoping someone with software skills (not me) could write a small app.
found this over on ppcgeeks somewhere
marka2k said:
That allows roaming (if I understand the setting you are referring to) not forced Roaming, I live in a area where there is a hint of Sprint Signal there is a 5 bar presence from US Cellular but my handset keeps jumping to Sprint I miss calls etc
My Palm 800W had a setting that would select Roam Only since it appears that we know which reg entry that needs modified I was hoping someone with software skills (not me) could write a small app.
Click to expand...
Click to collapse
Sorry, what I was talking about is after doing the hack and you have the Roaming Only ability, what's wrong with just choosing it from the Comm Manager settings dialog?
I actually switch from Sprint Only to Roaming Only on a regular basis, I've gotten very quick at making the change because I am used to to doing it.
tom6433 said:
found this over on ppcgeeks somewhere
Click to expand...
Click to collapse
What exactly does the CAB do? On the Sprint Touch Pro, its a single registry change. Is this CAB for other phones like the Verizon version or does it do something else as well? Just curious.
it creates the option in settings\phone\roaming for you to select roam only rather than going in and editing code. makes enabling and disabling easy.
tom6433 said:
it creates the option in settings\phone\roaming for you to select roam only rather than going in and editing code. makes enabling and disabling easy.
Click to expand...
Click to collapse
Oh, so it does the registry hack only? So a more friendly install for those not comfortable messing with the registry?
Exactly. I've done the mod several times on different devices. My home in Michigan is a Sprint dead zone. It teeters on Sprint and roaming all the time. When I came back this time I noticed my Roam Only option was gone. There must have been an OTA update that changed it back to my surprise.
Well this time I just used a cab and plan to use it on my wife's Diamond. Much quicker.
anyone know if sprint phones can roam on ATT towers? when i visit my parents there is a sprint tower 2 miles away and even when forcing roam i get no service. they all have full service on their ATT phones. that was the reason i installed this cab but either it does not work or i cannot use ATT towers.
Tom,
No you cannot roam on ATT. Its different technology. GSM vs. CDMA.
You can roam on VZW and Alltell etc.
Erik
Force roaming only on a Verizon touch pro 2
Dont get me wrong, Verizon Coverage is unbeatable, but I plan to live in Tijuana Mexico so that I can save some money on rent. The problem is that my phone (and every other phone I had) tries so hard to find verizon signal with no success as obviously there is no vzw towers in Mexico (only partner towers). On the phone menu there is only home only, automatic A, and automatic B. I need a hack so that I can have a "roaming networks only" so that I can freely use my phone without it switching automatically to a 1x one bar or zero bars. How can I do this??
With Use "2G Only" checked I get NO data. I've been googling and testing for 4 hours.
When I uncheck "2G Only" it switches to 3g and I get data. If the 3g signal is bad it will switch to E and I will get data and if I move near the window and the signal gets better it will switch back to H. So I know Edge works fine and is in this area.
At the same location, if I check 2G Only, I get no data. Voice is fine.
I went into *#*#4636 Info and when GSM Only is selected, I press Menu, and it shows Enable Data connection but when I select it, it does nothing. The menu disappears but it acts like nothing happened.
When I boot Windows Mobile 6.5 Edge and 3G work fine.
I have to get 2G only working because the 3g is random in my condo.
FYI, I can't get MMS sending to work either. I tried port 8080, I tried with username and without, with and without passwords, with APN type and without too.
I've had the same problem on builds that have a 3g only choice (wcdma). When selecting, I get no signal, otherwise it was fine. I wonder what that is messing with.
nrfitchett4 said:
I've had the same problem on builds that have a 3g only choice (wcdma). When selecting, I get no signal, otherwise it was fine. I wonder what that is messing with.
Click to expand...
Click to collapse
I have the same issue too
What network are you on? TMobile I assume since you talk about Edge and GSM.
Edge is 2.75G in essence. TMobile does not have a distinct 2G signal, at least not that I am aware of. It goes G (no data), E (Edge 2.75G), 3G, and H.
So by choosing 2G only, you eliminate even E...therefore no Data.
J
I'm on AT&T with a Telstra phone that has 850Mhz data.
If 2.75G is Edge and HAS data, how do I select it from the *#*#4636 or from some other menu?
On Windows Mobile 6.5, when I select GSM only I still get EDGE for data. So I can have a reliable voice call and when I'm not talking I can have Edge data.
In Settings->Wireless Networks->Mobile Networks,
I have "Data Roaming" unchecked.
I'm in an area when my weak-signal 2G connection on T-mobile frequently drops out and restores. Every time it restores, a popup graciously informs me: "Attention! Data Roaming will incur extra charges. Disable Data Roaming?" I must click yes to dismiss the window.
I don't get what part of the setting (Data Roaming: UNCHECKED) the OS doesn't understand!
Am I missing something or is there a special way to really disable data roaming or get rid of the popups?
thanks!
phone: vibrant JI6
Does it still show that it is connected to data when it is roaming?
chichu_9 said:
Does it still show that it is connected to data when it is roaming?
Click to expand...
Click to collapse
I sometimes see the Edge symbol in the top row. I just figured out that a couple of other carriers are sometimes weakly picked up at my location. I have a pay-as-you-go tmo sim in the phone (unlocked). I thought data roaming was not a possibility anyhow (I'm a noob at this). I only want to use 2G for phone, and wireless for data.
What I'm really hoping for is to NOT be asked to disable data roaming, since I made that setting.
fritzthevan said:
I sometimes see the Edge symbol in the top row. I just figured out that a couple of other carriers are sometimes weakly picked up at my location. I have a pay-as-you-go tmo sim in the phone (unlocked). I thought data roaming was not a possibility anyhow (I'm a noob at this). I only want to use 2G for phone, and wireless for data.
What I'm really hoping for is to NOT be asked to disable data roaming, since I made that setting.
Click to expand...
Click to collapse
Well here is a better option. Go into Settings>> Wireless and Network >> Mobile Networks >> Access Point Names >> Click on Menu & select New APN and create Dummy one. Then before selecting the back button make sure there the radio button for the dummy APN is selected. This should prevent you from connecting to Tmobile Data Services.
chichu_9 said:
Well here is a better option. Go into Settings>> Wireless and Network >> Mobile Networks >> Access Point Names >> Click on Menu & select New APN and create Dummy one. Then before selecting the back button make sure there the radio button for the dummy APN is selected. This should prevent you from connecting to Tmobile Data Services.
Click to expand...
Click to collapse
Thanks. That seemed to have worked, in that I don't get the roaming popups anymore. It seems that it may prevent me from roaming on 2G as well, but I'm not sure - I'm trying to figure this out whilst in cellphone hinterlands (in the San Juan Islands where the locals hate cell towers). Now I'm getting a string of popups requesting that I automatically search for providers, even though I've set it to manually select tmo. What I'm hoping for is just tmo 2G for phonecalls and SMS, with no guff from the phone about it. My Razr does that just fine.
Tomorrow, I'll drive off to a more cell-friendly area and make a better determination.
Appreciate the help!
fritzthevan said:
Thanks. That seemed to have worked, in that I don't get the roaming popups anymore. It seems that it may prevent me from roaming on 2G as well, but I'm not sure - I'm trying to figure this out whilst in cellphone hinterlands (in the San Juan Islands where the locals hate cell towers). Now I'm getting a string of popups requesting that I automatically search for providers, even though I've set it to manually select tmo. What I'm hoping for is just tmo 2G for phonecalls and SMS, with no guff from the phone about it. My Razr does that just fine.
Tomorrow, I'll drive off to a more cell-friendly area and make a better determination.
Appreciate the help!
Click to expand...
Click to collapse
I am glad it worked. Just set your phone to select automatically and you should be ok. Since you changed your APN, it will not connect to internet anymore using 3G. I know this coz, I used this while in Toronto last month.
So there is a setting burried down in Settings, More settings...Mobile Network. There are two options. CDMA and CDMA/LTE/EVDO. The CDMA option was selected stock. I have changed to the CDMA/LTE/EVDO option. Does this mean I will see/connect to LTE towers as they start lighting up in Atlanta-metro next week?
Or will I have to wait for some push update from Spring/Samsung that adds another connection type (e.g. Wifi, Bluetooth, etc...) to the mix?
The reason I care is that I don't want to root my phone until after I know it will work with LTE so I can ignore the sprint updates after that.
Help?
Hi All,
I just got the international Z5c, model E5823, which supports both tmo us LTE bands in my area (bands 1 and 12). When I have preferred network type set to 3G, I get more bars and have data connectivity. When I switch it to 4G, the bars go down to 1 or 2, and I get no data.
I did a logcat while switching from 3G to 4G and noticed that while switching, the icon switches between H+ and H, then eventually drops out. I'm still trying to see if there is anything useful in the logcat, but the one thing I noticed that seemed interesting was
Code:
D/StatusBar.NetworkController( 2598): updateIconSet, voice network type is: 13/LTE, data network type is: 13/LTE
To me, this looks like I might be seeing issues with some failed attempt to use voice over lte (as this phone supports it).
Regardless, does anyone know how I can disable voice over LTE? There was an option in the phone menu on the Z3 supposedly that would let you toggle, but I don't see it anywhere on this.
I'm going to be cross posting this in the sony forums as well, so if I hear back I'll post here.
Fixed it. I turned it onto 3g and selected "Internet settings" from the networking menu, which seems to have downloaded some configuration stuff from my carrier. After switching back to 4g I have fully working data.