[Q] Wifi connection problem - Omega rom v35 - Galaxy S III Q&A, Help & Troubleshooting

Hey guys,
Wasnt sure where to post this. Have a question regarding wifi conection settings. I was on omega v34 and everything was fine. My phone connected to all wifi networks I wanted it to. I updated to v35 of the rom and now I have a strange problem.
My phone still connects to my house wifi and work wifi, but refuses to connect to my parents wireless. Ive reset their router, changed the password and removed the settings for the network on my phone. When I refresh and attempt to connect to it all I get is "authenticating" and then it will give up. It is a BT home hub and the strange thing is that my phone will connect to the 'free wifi' BTwifi-with-FON and the BTwifi, but not the proper network zone BTHub3-T2G6. Its incredibly annoying.
Are there any hidden settings in my phone that may have the wrong settings for the network in it?
Any help would be appreciated
EDIT: Just turned the security off on the network and the phone connects fine. I dont understand why the security key would cause problems as it connected before the update and the settings havent changed.

check my sig

Related

WiFi keeps forgetting my WLAN Network

My s740 seems to work fine on my home Wifi network. But for some reason at my work network it's showing the network, but not connecting to it. It even keeps coming up saying new network found, so each time I put the WPA Key in and it will work for a while. As soon as it's disconnected it's forgotten again and I have to search and reconnect fresh every time.
What's going on? Is there a setting on the phone to sort it? Or something on my WiFi router I need to set??

[Q] WIFI connection stops transfering data

Hi, is anyone has the same problem? When I'm connected at home to my Tenda router (WIFI b/g/n) after cca 30 min. my phone WIFI stops sending and recieving data, Skype is offline, etc... but WIFI in phone is stil switched on. After I switch WIFI off and back on (on my Samsung, not on my router), everything works good for a while and after cca 30 min. is situation the same. Is there in Samsung any WIFI sleep mode or something like that? Or some settings, which is not visible? Any other suggestions? Sorry for my poor English. Thanx in advance.
I'm having the same problem. But I did a factory reset and it works fine afterward.
And just few hours ago, I encountered this problem again. What did to get this error was, I pressed "on samsungapps" and it failed to update and thus results wifi connection stopping. What about you? Also my Kies air is not working.
are you guys sure you have wifi sleep policy set correctly? just to be sure, settings, wireless, wifi, menu button, advanced, wifi sleep policy to NEVER.
Yes. And also even if i manually disconnect and reconnect the wifi back. The data still doesn't come in. It is stated there as connected but no data at all.
Somehow Wifi keeps searching every few seconds, even thought it's connected.
This is bound to cost in battery life too.
I have reseted router to default settings, disabled n mode, disabled security (only mac filtering is on), disabled all unnecessary features and PROBLEM IS SOLVED !!! Thanx God Tomorrow I will experiment with router settings to know, what was causing this error ;-)
Well at least u're connected, I'm facing the same problem as the thread starter. No data flow at all. Browser showing me offline msg. I had the same problem on the 1st day with the phone after I woke up. previously playing with most of the default aps. So i'm not sure what went wrong, did a factory reset and it works fine.
Until, few hours ago, I tried my kies air which didn't work. Browser couldnt load the address given. And I thought i had an outdated kies air, so i went to click on samsungapps, which failed to update me. At that point the wifi is still working, i leave my phone for about 30 mins, and when i came back. The same problem which happened on the 1st day came back. I was hoping to find an answer here so I didnt do the factory reset it. On another note, the phone wifi works after restart, but wouldn't last.
Edit: The wifi works after i resetted my modem to default. oh well. at least that solved it.
lukecz said:
I have reseted router to default settings, disabled n mode, disabled security (only mac filtering is on), disabled all unnecessary features and PROBLEM IS SOLVED !!! Thanx God Tomorrow I will experiment with router settings to know, what was causing this error ;-)
Click to expand...
Click to collapse
Hi,
Did you find out what setting was causing the connection issue? I also have this problem with my Tenda router. I thought it might be the wireless N, but disabling that doesn't fix it. I have a wireless distribution system set up with other tenda routers so didn't want to disable all the settings to troubleshoot if i can help it!
Thanks
spen2 said:
Hi,
Did you find out what setting was causing the connection issue? I also have this problem with my Tenda router. I thought it might be the wireless N, but disabling that doesn't fix it. I have a wireless distribution system set up with other tenda routers so didn't want to disable all the settings to troubleshoot if i can help it!
Thanks
Click to expand...
Click to collapse
I have the same problem, my router is N and the conection between SGS2 and my router is bad. Any idea?
Same problem here, I'm running WZR-AGL300NH in access point connected to my Ubuntu Server. Everything else works in the house just fine but SG2 stops transmitting data after a while.
I recently upgraded to KF1 firmware (and unknowingly wiped out whole phone, being on the bleeding edge and that didn't seem to help.
I would very much appreciate all tips because this problem is very annoying!
Additional Info:
- Buffalo is running latest firmware
- Authentication WPA2-PSK
- Encryption AES
paranoidi said:
Same problem here, I'm running WZR-AGL300NH in access point connected to my Ubuntu Server. Everything else works in the house just fine but SG2 stops transmitting data after a while.
I recently upgraded to KF1 firmware (and unknowingly wiped out whole phone, being on the bleeding edge and that didn't seem to help.
I would very much appreciate all tips because this problem is very annoying!
Additional Info:
- Buffalo is running latest firmware
- Authentication WPA2-PSK
- Encryption AES
Click to expand...
Click to collapse
Same symptoms here. Cisco DDR2200. WPA2 PSK. Haven't tried fiddling with the router yet.
This seems to be a common problem. Anyone knows of a definitive fix?
Bump...I have the same problem and the issue persists even after i reset the phone
Sent from my GT-I9100 using XDA App
Glad I found this, thought it was the ROM I had flashed to the phone (which is VillainROM)
I keep losing connection from my phone via wifi like everyone else in this thread
edit: I've just assigned my phone an IP address via my routers settings and I can connect to the net again
Also when it wasn't working, I couldn't ping the phone. When I assigned the IP just now I still couldn't ping it.
When I did a tracert to it, I could get to it when the IP was assigned and when it wasn't.
I have no removed the assigned IP for the phone from the router. Wifi connection is still working after disconnecting/reconnecting wifi on the phone.
I can also now ping the phone, where as before it was getting timeouts.
Also when it wasn't working the first time when I did a tracert it was showing up as HPsomething (didn't make note of the numbers)
this time when it is working it's just showing up as the IP address when doing a tracert.
Another update:
Just checked my printer, it has an IP address manually set on it, which at one stage when the phone wasn't working for internet it had the same IP as the printer, hence when tracert'ing it I was going to the printer instead of the phone and getting the HP etc back.
When it wasn't working at that time and looking at my routers DHCP list, it had the MAC Address of the phone against the IP that the printer has....
So I've got some issues with how my own network is setup ^_^ which looks like is causing me grief.
So the issue is with DHCP? Setting a static IP fixes it? I'll have to try, but I doubt this is a problem with the network, as all my other devices use DHCP without this problem.
I have the exact same problem!!
It's really annoying.
i was having problems with wifi too.. it keeps scanning and checking, etc, signal dropping for no reason..
fixed mine..well for me it worked
backup ur phone ( i dont take responsibility if ur phone catches fire or dies or chases u around )
u need to be rooted
download FXR WiFi fix and rescue from market
and just run the app.
now my wifi signal stays constant speed and i get good speeds
alternatively try
WiFi Fixer
both of them will cause high battery usage..i think since it keeps the signal at maximum.. so only enable wireless when i need it or use juice defender or green power.
greenpower seems great. using this at the moment

Mozart not finding my (non-hidden) Wi-Fi network

My Mozart for some reason can no longer find my home wi-fi network. It was working just fine 10 minutes ago and now, all of a sudden I unlock it and theres no Wi-Fi connection. Checked in Settings but the network doesnt appear in the list anymore.
The network is fine as im using it on my laptop now to type this and on my iPad. I tried switching Wi-Fi on an off several times and also rebooted the device many times too. I also tried adding the network like it was hidden, but no avail...
Any ideas?
UPDATE (PROBLEM SOLVED)
Okay i got the problem fixed, it wasnt a Windows Phone problem, my router suddenly decided to change the channel it was broadcasting on, it was 6 before, bumped it to 11 and now the phone is able to connect again XD
Are you running Mango?
I had problems connecting to my Wi-Fi pre-Mango when the SSID was hidden. Mango, however seems to connect fine in this scenario.
Apologies... I just re-read your question. I seem to have mis-read the NON HIDDEN network.
Stig said:
Are you running Mango?
I had problems connecting to my Wi-Fi pre-Mango when the SSID was hidden. Mango, however seems to connect fine in this scenario.
Click to expand...
Click to collapse
Yeah im on official Mango, forced it through Zune... And im certain my network isnt hidden...
If you go to Settings -> Wi-Fi -> Advanced is the network shown as a 'Known network'? If so, remove it restart your phone and try again.
Stig said:
If you go to Settings -> Wi-Fi -> Advanced is the network shown as a 'Known network'? If so, remove it restart your phone and try again.
Click to expand...
Click to collapse
It was listed and yeah, i tried that too, didnt work.
I think i'll hard reset the phone to the original pre-NoDo ROM and see if i have the same problem, if I do then it might be a hardware issue? Good thing I still have my warranty...
[UPDATE]
I just reset the phone, lost all my data for nothing -.-
[UPDATE 2]
Restored the phone to 7008, same problem... I'll reset the modem in a few hours. I hope that's the problem because the phone has no problem finding and connecting to networks further away from me...
Have you tried enabling the SSID again in the router setup then connect on your handset and finally hiding it again through the router?
dingodog said:
Have you tried enabling the SSID again in the router setup then connect on your handset and finally hiding it again through the router?
Click to expand...
Click to collapse
Okay so i reset the router, even changed the SSID and password. STILL the Mozart doesnt find it. I think i've exhausted my options

Post-ICS hotspot issues

Running stock, clean install of .12. My Hotspot (which I do pay for, so that isn't the issue) isn't behaving at all. The phone is broadcasting the network and devices can authenticate, but they're not being routed to the Internet once they're in. "Limited connectivity" or "No Internet" statuses on my PC, lack of IP config details on my iPod/Pad.
I called VZW support last night and the guy had me shut the phone off, then he reset something on his end and had me turn it back on again. For an evening it ran like a top. Today I'm right back where I sarted. It *can* work, it just isn't.
Interestingly, when I run Mobile Hotpot, it gives no indication of trouble, but in the Tethering & mobile Hotspot menu in Settings, when i run the Hotspot, I get "Error" showing up in there. Doesn't say what kind of error, no detail/debugging, just "Error."
To recap:
ICS .12, stock
WiFi network ok, Routing not (apparently)
"Error" in settings when Hotspot is on.
Only thing I've seen that sounds anything like this was an APN issue on a different carrier's ICS phones post-update. I'm stumped at this point and like my odds better here than I do calling Verizon again...
I am having the same problem after OTA ICS, I can turn my hotspot on and it says connected to 1 device (my laptop) and when I try to connect to the wifi it takes a while and says "limited connection" and will not work. If I go to my mobile settings it says hotspot...error. usb tethering (internet connection mode) still works but the wifi hotspot doesnt at all, I thought they were supposed to fix this!

JB broke my wifi

I've tried searching and haven't found anyone with the same issue as I.
Jellybean broke my wifi, I had no connection issues before whatsoever.
Now, it still shows it's connected to the network with full strength but when I go to use the internet or any apps, it says there is no network connection, webpage unavailable, no autosync, etc. Things are fine when I go back to 3G and nothing has changed on my phone but the JB update. I've turned Sprint Optimizer off and on, deleted and manually readded all the wifi networks, and am not sure what else to do besides hard reset. Any ideas? Also, I am not rooted.
ispatonyourgrave said:
I've tried searching and haven't found anyone with the same issue as I.
Jellybean broke my wifi, I had no connection issues before whatsoever.
Now, it still shows it's connected to the network with full strength but when I go to use the internet or any apps, it says there is no network connection, webpage unavailable, no autosync, etc. Things are fine when I go back to 3G and nothing has changed on my phone but the JB update. I've turned Sprint Optimizer off and on, deleted and manually readded all the wifi networks, and am not sure what else to do besides hard reset. Any ideas? Also, I am not rooted.
Click to expand...
Click to collapse
have you done a complete network reboot (cable modem and wifi router) when having the crappy sprint connection optimizer off?
if this helps you feel free to hit the thanks button
Thanks for the help! I found the answer in another thread... Seems JB automatically turns on "DLNA auto-ip" for some people. The fix that worked for me was Settings>Wifi>Menu>Advanced and uncheck "DLNA auto-ip" at the bottom.

Categories

Resources