I rooted mah Prime (TY Viperboy and contributing dev's!) and finally installed Font Changer. After I selected the font I wanted, obviously I re-booted....and re-booted..and etc. My TFP won't get past the ASUS boot animation, the circle just keeps spinning and spinning. I tried wiping user data and still nothing. Does anyone have a similar experience or advice? I didn't change the density or anything else, just the font.
I also tried the reset button a few times just in case and still the same thing. Android Commander doesn't see it when I connect either, Windows tried to install drivers for it(which i've obviously already installed) and kept getting an error.
98 views...am I the only one who has used Font Changer on the TFP? Do any of you vets on here have an idea how I might be able to boot the device or at least completely revert it to all factory settings/apps? I apologize for having a one sided conversation, but I really would like to use mah Prime again. Thanks!
Sent from my SPH-M900 using XDA App
I use Font Changer and haven't had a problem yet.
Hmm...Well I opted to re-boot from Font Changer after I changed fonts. Did you do the same?
pappasquirrel said:
Hmm...Well I opted to re-boot from Font Changer after I changed fonts. Did you do the same?
Click to expand...
Click to collapse
Yes. I don't know what to tell you.
Anyone know if there is a file I could put on my sd card that the TFP would boot from, like how PG86IMG works w fastboot?
not sure, but i would suggest you to get the newest update from their site, then pop it on a micro sd, (or sd if you have the dock) and try holding power and vol up .... or maybe power vol down, dont remember..
now when you download the zip from asus site, make sure to unextract and copy the zip after you unextract. It's a zip in a zip.
Then try with the zip as its labeled, maybe it'll work or rename to update.zip.... that seems to be the norm on other devices.
good luck, i hope it works so we can have another solution for those that this happens to. Can't wait for unlocker tool, so we can get a recovery on this and if that ever happens we can just do a restore. good luck!
Good idea, thanks! I will give that a go and report back soon. I know I had this problem once or twice on my EVO3D and Moment, I would have to do something similar and try again. I'm hoping for good news to report
keep us updated, I am sort of in the same boat. Mine wont boot up after last firnware update and I have been searching to see if I can make it read the update file from SD
btw, try volume up with power, then hit volume down.... maybe it'll just do a recovery with the image it already has
damn i dont know if its volume up or down.... anyone ever tried this? i dont have my tab with me...to test
Its vol dwn+power for recovery. it will ask to press vol up within 5 sec to enter RCK, I've done that and "andy" just lays there on his back w an exclamation mark coming out of his chest.
If you wait, you get a screen with 10 seconds to select one of two options, User Data Wipe and linex cold boot. I've tried both with no avail. One more thing I found out is since my Prime just stays at the loading screen, everytime I hold power or reset button it would just reboot and hang there again. Aside from letting the battery die the only option I've found to shut down is hold vol up+power till it vibrates, keep em dwn for 2 more seconds and it will shut down.
Sent from my SPH-M900 using XDA App
Font Changer, now TFP won't boot.
My Asus Prime is in the same situation as yours. A rooted it and install Font Changer, after reboot my TFP won't get past the ASUS boot animation. I tryed all the things you do, but Android doesen´t start.
I install APX driver in Windows 7, and when i connect the USB cable, the device is reconized in Windows Device Manager, but a can not acess the tablet.
I don´t know a method the acess the Tablet from microSD, do you know ?
May be BOOTLOADER UNLOCK release from ASUS solve it.
Good luck for us.
Still nada. Windows will reconize that its plugged in, but I get a code 43 or code 10 and can't access the TFP in anyway (that I know of). I asked the same question over on Transformerforums.com and member leeshor has been really helpful. Most of the idea's I was given I had already tried or I could not get to work for my specific problem, but I'm sure that the info will be helpful for a lot of you guys. Here's a link to my thread, check leeshor's sig for some helpful tips. http://www.transformerforums.com/forum/transformer-prime-help/15428-font-changer-now-wont-boot.html
I'm still workin' on it and I'll post if I am able to make any progress, good luck!
Data wipe will definitely not work in this situation as it does nothing to the /System which is where the font's are stored. My best guess is that the font was changed but the permission was not correctly written, had this problem in the early days of my Desire HD.
The only solution that will work, is if you can get into an ADB shell and either put the original fonts back or change the permissions to the correct permissions.
Doktaphex said:
Data wipe will definitely not work in this situation as it does nothing to the /System which is where the font's are stored. My best guess is that the font was changed but the permission was not correctly written, had this problem in the early days of my Desire HD.
The only solution that will work, is if you can get into an ADB shell and either put the original fonts back or change the permissions to the correct permissions.
Click to expand...
Click to collapse
That's what I figured, I just can't get windows to recognize it. When I connect via USB and the device is off, windows sees it as an unknown device(obviously) and that the drivers are fine. After I power it up, windows will either recognize it as an MTP device and when I try to access the tab or re-install the drivers I get a code 10. Or it will still show up as an unknown device with an "!" giving me a code 43. Is there any other way I can gain root access?
It's been awhile (or seems so) and I still haven't had any success. Has anyone else made progress getting back to a usable device??
Ok, so before I send my prime in...do any of you smarty pants know (guess is fine) if this lil problem some of us are having will have a solution when ASUS unlocks the bootloader? Unless there is some kind of boot.zip err something that will load up from stock recovery, I don't think it will change anything. Thoughts? Advice? Bueller?? Thank you in advance
Sent from my SPH-M900 using XDA App
Unlock-bootloader.apk....I guess that answers my question to whether i'd be able to fix permissions from recovery :/ What am I not seeing? There has to be a way to get these Primes w no adb access and a stuck boot screen to fire up...?
Sent from my SPH-M900 using XDA App
Have you tried the blob file from SDcard trick. I believe you rename the update to EP201_SDUPDATE.zip and it should be able to run from the RCK. It has to be on a micro sdcard though otherwise it doesn't work apparently.
As outlined here:
http://forum.xda-developers.com/showpost.php?p=22743057&postcount=119
Finally found the answer in the Nexus forums: http://forum.xda-developers.com/showthread.php?t=1379875
--------------------------
Please tell me I'm not missing the obvious. Here's the deal.
When the phone is booted and running normally, adb works fine. No problems looking around/pulling/pushing/changing permissions/etc...
But when I boot into recovery, it says it has found a new device (Android Samsung SPH-L710 or something like that) and wants to install drivers for it. I have searched thoughly using just about every combination of "adb" "Samsung" "recovery" "Galaxy S3" etc, etc, etc I could think of. They all point to the drivers I already have !!!
I like to make custom icons for things like the title bar, you know, just add a little color to the signal strength, data in/out arrows, things like that. My usual routine with my old EVO was to hook up to the computer, use the batch files I have written to pull framework/SystemUI or whatever, drop in the png I changed, then reboot the phone to recovery and push them back. I don't like using root explorer to put them back while the phone is running normally, but that's what I've had to do so far.
Can someone point me in the right direction? Am I missing the obviuos (wouldn't be the first time ) ?
Nobody? Is adb working for you in recovery?
Hey all, this is my first post on this forum. I registered just to let my voice be heard.
Let me just say that I have done extensive research into these problems but I don't want to brick my phone so I want to know the direct steps for me.
OK my problems are:
Upon turning on the phone the original Motorola logo is gone and is instead replaced by:
"Unlocked. PwrReason: PWR_KEY_PRESS. OS will boot in 5 seconds. Press a key to stop countdown. Avaliable Modes are: " and lists 14 different modes I can choose
This happened after I accidentally deleted my pds folder or something of the sort. I must've partitioned something accidentally and as a result my phone did not boot the next time around. It booted after I did a battery pull but gave me the next problem.
Upon booting into CM10.1 I noticed that the soft keys would not work. The entire screen was recognized as one big touch surface.
I deduced that some file was deleted which makes the screen recognize the soft keys, so I proceeded to do some research into it. The methods I saw to do were doing some sort of pdsfix which is not recommended unless necessary, which in my case is very necessary. I can boot into Romracer's recovery (5.0.2.7 I believe it is) as well as my OS. Everything is working except for those problems I listed. I am not sure if my phone can boot into fastboot but I can try. Please post your answers because I really need to get my phone working perfectly again. At this point, it is only useful for texting and a little music (and settings). I can't go into much else without restarting the phone each time (you must know why).
EDIT 15/04/13
-----------------------------------------------------------
I just flashed pdsfix(gingerbread).zip and I am now able to use my phone at normal speeds and even overclock if necessary. I was running epinter's CM10.1 Rom
Fixed half the problem!
Okay so after many hours of trying, I managed to install the drivers for fastboot on my computer and did the fix for the pds file.
First I downloaded moto-fastboot.zip and extracted to my C:/ drive.
Then I tested if my device was recognized. It didn't recognize it at all, so I went into device manager.
In device manager there was my problem. I saw fastboot with a yellow exclamation sign. I right-clicked it and directed it to where I had previously downloaded fastboot drivers. (Found them here: FASTBOOT DRIVERS
It installed nicely and when I tried the commands listed in Method 2 on this page PDS Partition Fix it worked perfectly!
So I proceeded to restart the phone, no issues. But the Motorola logo at the very beginning is still not there. It says unlocked at the top left and displays the same options as before. The phone is still fully functional without it, but I want to get it back. I will be doing more to fix this though.
But the best part is that, my soft-keys are working perfectly! :laugh: I do notice a little lag in the system but that will be fixed soon. Hope this helped anyone who didn't know what to do.
P.S. If you find a way to restore the Motorola logo on boot, please tell me!
http://forum.xda-developers.com/showthread.php?t=1423763
Logo and animation
Mojar7070 said:
http://forum.xda-developers.com/showthread.php?t=1423763
Logo and animation
Click to expand...
Click to collapse
Perfect! Thanks much for finding that for me. I now have the problems fixed except that my cpu won't clock above 608 mhz even when I put the min clock slider higher than that value.
I suspect that perhaps I flashed the froyo pdsfix instead of gingerbread. Maybe that is causing the problem. I'll try and post my results soon.
My Atrix 4g is fixed!!
Wow I can't believe I finally fixed it! It was as I suspected. After downloading the pdsfix(gingerbread).zip I rebooted my phone into fastboot and proceeded to flash the zip. And who would've guessed it? I am now able to clock at usual speeds including the 1000MHz of old ^_^. I am sooo glad I found this forum. If anyone had similar problems you can try the steps I did.
P.S. For the record I was running epinter's CM10.1 Rom for the Atrix 4g. I may go to Neutrino's in the near future, but I am just glad to have my phone back in working order :laugh::laugh:
My phone has been in this condition for weeks now and I cannot seem to find a solution. Any ideas at all?
Quote:
Originally Posted by Milimbar
"Its not a boot loop, that would be when you try to boot a phone (or anything) and it crashes mid boot restarting again only to crash again, his is just freezing and not fully booting."
That's right, you understand. and perhaps I just don't know what it means but, I don't think it "freezes" on the 4GLTE screen, it loads until that screen and then continues to be animate, rings appearing and disappearing, loading indefinitely. I don't know if that's anything different, but just in case that clarifies anything.
and I tried http://forum.xda-developers.com/show....php?t=2040264 but to no avail. it always fails @ or immediately after the RECOVERY step.
Any ideas?
EDIT / DELETE
REPLY
original thread: http://forum.xda-developers.com/showthread.php?p=39978360#post39978360
Greetings,
I am running an HTC One with CyanogenMod (Android 4.2). I had attempted to create and load a custom boot animation. I was able to pull from the source zip (/system/media), and confirm that I could reload it. I greated jpg's which were the same pixel count as the Cyanogen Animation (I didn't touch the desc.txt at all) and recompressed it (mac user so zip -0r bootanimation.zip). I pushed it back to the same location, and rebooted the phone. I was greeted with the wonderful message saying my bootloader has been tampered with, and then nothing for the rest of the phones boot until the lock screen.
Reloading the original animation zip still works. I have also tried a couple other tested HTC One boot animations, and none have succeeded. I ran the bootanimation command straight from the bin folder, and nothing happens. It just skips to another line, no message, no animation.
I am from the world of windows originally, and am still getting used to the mac/linux structure of things. Any help would be greatly appreciated as I am not sure how to troubleshoot this problem further. All googling on the topic has produced solutions for others, but not myself. I understand this is a new piece of hardware, and it just may not be possible yet.
Thank you!