[SOLVED]XMP stuck at Sony logo - Sony Ericsson Xperia Mini, Mini Pro, Xperia Pro, A

so I decided to play with custom ROMs. firstly, I installed Serenity but I couldn't send or receive an MMS, so I switched to OptiMax. I wiped everything before flashing it and the installation worked fine. then I decided that I rather prefer Xperia keyboard than Nexus 4 and some other things, so I opened the ROM in Aroma, reselected all the options that I wanted to choose and ticked all "wipe" options in Aroma menu (not in CWM). the ROM installation went fine, but it got stuck at Sony logo. I've waited and waited and waited, and nothing happened. so I made something that might turn out to be a bit foolish: I took out the battery. after rebooting the phone got stuck on Sony logo again. so I decided I'll reflash it to .58 firmware, root it and upgrade to .587, but when I press vol- and plug in the phone when in Flashtool, the phone turns on and displays Sony logo and gets stuck.
any help please? I've got locked BL and I'd rather not unlock it.
edit: it connected to Flashtool. I'm saved.

You had to turn phone completely off, take battery off, wait 15 seconds, put battery in, hold volume down and while holding connect in flashmode
Please put the [SOLVED] Tag, now you have solved it :good:

er, where do I mark it as solved? I'm not used to the XDA layout yet ^^

najodleglejszy said:
er, where do I mark it as solved? I'm not used to the XDA layout yet ^^
Click to expand...
Click to collapse
Just in the title
[SOVLED][Q] XMP stuck at Sony logo
Click to expand...
Click to collapse

ah, sorry, I thought there's a special button ^^

Related

Really bricked phone

Hi,
I would like to ask you for advice before throwing my X10 mini away and buying something else.
I have had MiniCM7 installed for a very long time (more than a year), and upgraded to all versions without any problem. Today I installed MiniCM9 3.0.2, but I decided to reinstall MiniCM7 because of some problems detected with this version, so I went to SEUS, downgraded to 2.1.1.A.0.6, installed BusyBox, xMiniRecovery, root and flashed MiniCM7 2.2.0 and gapps. I have done it quite a lot of times before.
But, when I tried to reboot onto MiniCM7 2.2.0, my phone was stuck onto Sony Ericsson logo. Here's what I did:
1) Ok, Home+Power and reenter into recovery by pressing back key. No, no luck, it doesn't enter into any recovery.
2) B plan, I'll go to SEUS again. Home+Power, connect USB and keep back key pressed. Nothing, SEUS doesn't recognize anything, but Companion does activate a little popup on my Windows, as if it detects my phone plugged into my computer. No red, yellow, or green lights in the phone.
3) C plan. Flash kernel directly. I downloaded kernel from http://forum.xda-developers.com/showthread.php?p=17674938#post17674938 and used FlashTool. But, again, when I press Home+Power, connect the USB cable and press back key, it doesn't recognize anything, FlashTool is waiting for me to connect something. Antivirus is disabled.
If I keep back key pressed, no SE logo appears; black screen. If I release back key for a little while, SE logo appears and it gets stuck.
Both if I connect it to the computer or to the power socket, no green/yellow/red led appears.
Does anybody have any idea? Everything (cable and phone) were working wonderfully before flashing 2.1.1.A.0.6 for the last time.
Kind regards,
Jordi
Ok,before u try this u should know it will delete everything of phone memory:apps,contacts,etc.
And it removes root and recovery and phone will be like the day u bought it except that bootloader is not touched if unlocked stays unlocked
TRY AT UR OWN RISK
Steps:
1-download sony erricsson pc companion
2-click support zone and choose software update
3-before clicking continue click on repair phone
4-wait till loads and choose phone type
5-concentrate on this one cuz it has 2 methods
5a:if ur phone doesent restart automaticlly just plug usb in computer first then with phone powered off hold the back button and connect the usb cable only let hold when it says u can
5b:if ur phone DOES restart automaticlly remove battery till u reach this step and put back cover bedside till ur done with this method what were gonna do is when we reach this step we quickly plug battery and before it restarts just hold back and insert usb cable.
6-wait to install
7-congratulations unbricking
8-(optional):click the thanks button :xD
Sent from my U20i using XDA
Hi,
Thank you very much for your quick answer. I had never realized the procedure shown in steps 2-4.
But Companion refuses to install it! "It's impossible to install or setup update components of phone sotfware" grrrrrrrrrrrrr Tomorrow I'll try to get another computer and follow your procedure.
Thank you very much
Always happy to help as ive been in such issues alot
Sent from my U20i using XDA
You say you have an X10 Mini, and not an X1O Mini-Pro.
The X10 Mini requires you to run the nAa-kernel in order to run the latest verstion of MiniCM7.
You say you downgraded back to stock firmware and installed MiniCM7 again, did you forget about the kernel?
SmG67 said:
You say you have an X10 Mini, and not an X1O Mini-Pro.
The X10 Mini requires you to run the nAa-kernel in order to run the latest verstion of MiniCM7.
You say you downgraded back to stock firmware and installed MiniCM7 again, did you forget about the kernel?
Click to expand...
Click to collapse
Aaaaaaaaaaaaaaaaarghhhhhh you are right!!!!!!! I have installed kernels and versions a lot of times on my device, and I was so confident of myself that this time I didn't realize I was missing one of the most important steps!!!!!!!!!!!!!!! So stupid of me.......!!!!!!!
I've tried PC Companion as suggested before, but no way: it doesn't detect the "flash mode" at boot time. I keep pressing Back key and I only get a black screen; when I release Back key, SE logo appears and gets stuck forever. It doesn't matter if I try SEUS, PCCompanion or FlashTool, it's always the same. I can't shut it down, just restart over and over again via Home+Power.
Does anybody know what can I do?
Kind regards,
Jordi
jordisegurapla said:
Aaaaaaaaaaaaaaaaarghhhhhh you are right!!!!!!! I have installed kernels and versions a lot of times on my device, and I was so confident of myself that this time I didn't realize I was missing one of the most important steps!!!!!!!!!!!!!!! So stupid of me.......!!!!!!!
I've tried PC Companion as suggested before, but no way: it doesn't detect the "flash mode" at boot time. I keep pressing Back key and I only get a black screen; when I release Back key, SE logo appears and gets stuck forever. It doesn't matter if I try SEUS, PCCompanion or FlashTool, it's always the same. I can't shut it down, just restart over and over again via Home+Power.
Does anybody know what can I do?
Kind regards,
Jordi
Click to expand...
Click to collapse
Only thing i can think off is to press home-power-back at the same time and release home and power when the screen goes black, all this with the phone connected to the pc via usb, but i'm not sure if that will work.
SmG67 said:
Only thing i can think off is to press home-power-back at the same time and release home and power when the screen goes black, all this with the phone connected to the pc via usb, but i'm not sure if that will work.
Click to expand...
Click to collapse
I've tried that already, doesn't work...
Looks bad, huh???
SmG67 said:
Only thing i can think off is to press home-power-back at the same time and release home and power when the screen goes black, all this with the phone connected to the pc via usb, but i'm not sure if that will work.
Click to expand...
Click to collapse
I do not know what did I do, but by trying for the 1000th time to do the Home+Power+Back key combination with USB connected and keeping Back key pressed, and pressing and releasing it madly afterwards, while FlashTool was waiting for me to flash MiniCM7, FlashTool has reacted!!!!!! It allowed me to install MiniCM7 again!!!
What happened? I do not know, perhaps I pressed Back key just the microsecond that the hardware needed it.
Thank you very much!!!!
hahaha, cool And here i was thinking you were trying to flash the kernel, lol
But good luck
SmG67 said:
hahaha, cool And here i was thinking you were trying to flash the kernel, lol
But good luck
Click to expand...
Click to collapse
Ok, you are right again; FlashTool allowed me to install the kernel ;-) and then, everything else.
Thank you very much, really!!!

[Q] PLEASE HELP! U20i X10 mini pro stucked

Hello.
I have a problem. Shortly:
I've installed a new rom, aAn's CM7mod, i think the v2.2, because i couldn't get the tethering work with the other rom. Okay, CWM recovery, install, reboot.. Then for one week was stuck at Sony Ericsson logo, i tried to take out the battery even for 2 days, everything, but still stucked.
Now i tried the flashtool, disconnect the phone, take out the battery, then put it back, press back button, connect usb, green led appears, 5 secs and the phone starts, exits the flashmod. So i cannot get into the flash mode, to make a recovery.
Pls give me advice. Thanks.
kobrn1 said:
Hello.
I have a problem. Shortly:
I've installed a new rom, aAn's CM7mod, i think the v2.2, because i couldn't get the tethering work with the other rom. Okay, CWM recovery, install, reboot.. Then for one week was stuck at Sony Ericsson logo, i tried to take out the battery even for 2 days, everything, but still stucked.
Now i tried the flashtool, disconnect the phone, take out the battery, then put it back, press back button, connect usb, green led appears, 5 secs and the phone starts, exits the flashmod. So i cannot get into the flash mode, to make a recovery.
Pls give me advice. Thanks.
Click to expand...
Click to collapse
you didn't flash nAa's kernel, as instructed in the post where you got the ROM from.
thanks a lot, but u didn't help me at all, in this situation...
kobrn1 said:
thanks a lot, but u didn't help me at all, in this situation...
Click to expand...
Click to collapse
no, i didn't... how were you thinking of making a recovery in flashtool then?
well, this would be my question. what can I do? cannot get in the flashmod more than 4-5 seconds, because the phone is starting, and getting stucked at SE logo.
kobrn1 said:
well, this would be my question. what can I do? cannot get in the flashmod more than 4-5 seconds, because the phone is starting, and getting stucked at SE logo.
Click to expand...
Click to collapse
Do you have the kernel you need for the ROM you flashed?
Anyway, if you start up PC Companion or SEUS with the phone disconnected and choose update, it will give you a repair option. choose that, select your phone-model, it will download the firmware for it and ask you to connect your phone flashmode. It doesn't need flashmode for very long, it will connect within a couple of seconds. once the popup-dialog disappears jsut leave your phone alone and you will be back on stock firmware.
Thanks will try that, than im comeing with the news..
SmG67 said:
Do you have the kernel you need for the ROM you flashed?
Anyway, if you start up PC Companion or SEUS with the phone disconnected and choose update, it will give you a repair option. choose that, select your phone-model, it will download the firmware for it and ask you to connect your phone flashmode. It doesn't need flashmode for very long, it will connect within a couple of seconds. once the popup-dialog disappears jsut leave your phone alone and you will be back on stock firmware.
Click to expand...
Click to collapse
Not working thisone neather, the phone is starting too fast and i cannot flash it. Help please, couse im getting mad, and i dont want to break this phone
And i dont have the kernel, and it would be pointless cause i cannot enter recovery mode, cannot flash it neather.
kobrn1 said:
Not working thisone neather, the phone is starting too fast and i cannot flash it. Help please, couse im getting mad, and i dont want to break this phone
And i dont have the kernel, and it would be pointless cause i cannot enter recovery mode, cannot flash it neather.
Click to expand...
Click to collapse
You can try to enter flashmode by pressing HOME and POWER button at the same time, that will give it a hard reboot. As soon as the screen goes black (backlight off too), press the back-button. Do this with the usb-cable already attached to your phone and your pc. Ofcourse you do this only when flashtool or SEUS/PC Companion show you the popup to connect your phone in flashmode.
I had the same problem with my E10i, and that home+power than back b. combo helped! :good:
My cell was stucked on bootlogo, but in E10i (X10mini) you couln't pull out the battery just like that, so if you whant to SEUS repair your phone, you must have the phone turned of completly, but i couldn't do that. So i start SEUS whait till i get to the point when he whant your phone connected, then i press home+power button, managed somehow to plug in USB c. than press the back button and releas the home+power buttons. The rest is history...seus recognize the phone...download the files...and repair my phone.
Good luck mate! Try it! :fingers-crossed:
Okay, i've made it.
Shortly, the 1rst problem was the windows 8, ive reinstalld the 7th and SEUS on it, then easily selected the phonetype from the list, than holding back button, than connecting the cable, easy light clean install and thats it.
Thanks guys.

Xperia S totally briked, what to do?

Hello, I have looked a lot around here but didnt find the solution
I was touching "the "android.policy.odex" for a mod and phone rebooted into sony logo all time. With CWM recovery I tried to restore a backup but It failed
Phone still on sony logo, not boot, the only thing I can do is turn it off by pressing power + volume up a few seconds. It turns off but now, what to do?
I have locked bootloader.
If I try to turn on, it remains in sony logo... recovery doesnt work too
THANK YOU VERY MUCH!
Javi22 said:
Hello, I have looked a lot around here but didnt find the solution
I was touching "the "android.policy.odex" for a mod and phone rebooted into sony logo all time. With CWM recovery I tried to restore a backup but It failed
Phone still on sony logo, not boot, the only thing I can do is turn it off by pressing power + volume up a few seconds. It turns off but now, what to do?
I have locked bootloader.
If I try to turn on, it remains in sony logo... recovery doesnt work too
THANK YOU VERY MUCH!
Click to expand...
Click to collapse
You can repair from pc Companion, SEUS or using flashtool and after this, root, CWM and restore backup.
Cheers
I am silly, damn I didnt realize I could flash with flashtool, I am sorry, thanks a lot men, Im doing it now, thank you....
Javi22 said:
Hello, I have looked a lot around here but didnt find the solution
I was touching "the "android.policy.odex" for a mod and phone rebooted into sony logo all time. With CWM recovery I tried to restore a backup but It failed
Phone still on sony logo, not boot, the only thing I can do is turn it off by pressing power + volume up a few seconds. It turns off but now, what to do?
I have locked bootloader.
If I try to turn on, it remains in sony logo... recovery doesnt work too
THANK YOU VERY MUCH!
Click to expand...
Click to collapse
First of all you must hold power+volume up keys till you recieve 3 times vibrate ( after first vibrate you continue holding till it happens )
In this time your phone goes off , and then flash a new official ROM by useing a flashtool if you rooted your phone otherwise use SUS or sony pc campanion to repaire your phone.
Attention: After powering off don't power on again because put you back the first situation

Xperia active died

Hello guys,
I have an Xperia active rooted with ICS (sony official) and it just died. I got a phone call and before I even answer it the phone crashed and was unresponsive. I removed the battery and from that point on it doesn't boot. I just get a vibration and then nothing. It needs to remove the batter again in order to shut down.
Some things that might help
1) No response or led light when plugged into PC or wall charger
2) Can get to Fastboot and Flashmode
3) I tried flashing again ICS and 2.3.4 but still nothing. The flash finishes OK but I the phone doesn't turn on.
4) When tried flashing with Wipe Data option enabled I always get the Abort Flashing error.
Any help will be appreciated. Thank you in advance.
boiod said:
Hello guys,
I have an Xperia active rooted with ICS (sony official) and it just died. I got a phone call and before I even answer it the phone crashed and was unresponsive. I removed the battery and from that point on it doesn't boot. I just get a vibration and then nothing. It needs to remove the batter again in order to shut down.
Some things that might help
1) No response or led light when plugged into PC or wall charger
2) Can get to Fastboot and Flashmode
3) I tried flashing again ICS and 2.3.4 but still nothing. The flash finishes OK but I the phone doesn't turn on.
4) When tried flashing with Wipe Data option enabled I always get the Abort Flashing error.
Any help will be appreciated. Thank you in advance.
Click to expand...
Click to collapse
Bootloader is unlocked or not?
If yes, flash another kernel and install any rom...
mihahn said:
Bootloader is unlocked or not?
If yes, flash another kernel and install any rom...
Click to expand...
Click to collapse
Yes it's unlocked. I tried your suggestion by installing this kernel http://forum.xda-developers.com/showthread.php?t=1398910 and then the official ICS image but still the same thing. It vibrates when turned on and stays there .
boiod said:
Yes it's unlocked. I tried your suggestion by installing this kernel http://forum.xda-developers.com/showthread.php?t=1398910 and then the official ICS image but still the same thing. It vibrates when turned on and stays there .
Click to expand...
Click to collapse
Could it be battery related? You cannot enter clockworkmod, when you have flashed for example rage or x-kernel?
mihahn said:
Could it be battery related? You cannot enter clockworkmod, when you have flashed for example rage or x-kernel?
Click to expand...
Click to collapse
If it was batter then it shouldn't turn on at least when plugged into the charger? Also once I hit power button and vibrates then it stays there, it doesn't shutdown. If I press the button again it does nothing until I remove and put back the battery. I believe this is an indication that it's not battery. Also the first time when crashed when I was pressing the power button the bottom buttons (return home and menu) were turning on (not anymore though since it seems that doesn't boot at all)
I tried booting to clockworkmod but no luck . Just to make sure, how do I do it in Xperia Active? If I remember correctly I have to press the volume down button several times until it gets into to he recovery mode, right?
Yes, you are right. Try to relock your bootloader.
[email protected] 2
Patrol619 said:
Yes, you are right. Try to relock your bootloader.
[email protected] 2
Click to expand...
Click to collapse
How can I relock the bootloader? What if the solution is to have an unlocked bootloader? Can I unlock it again since the phone is not responsive now?
Sorry for two many questions. I started really worrying about losing the phone now .
I just noticed that for rage kernel I have to wait for the blue light to turn on and then press volume down. I do this but still nothing. I started suspecting that might be a screen problem. Can someone give me the sequence to restart phone or turn off from the recovery mode? If this work and it means it's my screen I guess.
Maybe it has something to do with bootloader. I bet it can be relocked, you just have to search a tutorial. I would try it, you have nothing to lose now.
[email protected] 2
boiod said:
I just noticed that for rage kernel I have to wait for the blue light to turn on and then press volume down. I do this but still nothing. I started suspecting that might be a screen problem. Can someone give me the sequence to restart phone or turn off from the recovery mode? If this work and it means it's my screen I guess.
Click to expand...
Click to collapse
You can't turn off from cwm, just pull battery. Maybe screen is dead, so background screen. You could try logcat to see what happens.
So the blue light appear, but screen doesn't come up? So it's related to the screen I think.
If you flash sony stock rom for your device you should be able to relock bootloader, just search in the forum for solutions...
boiod said:
I just noticed that for rage kernel I have to wait for the blue light to turn on and then press volume down. I do this but still nothing. I started suspecting that might be a screen problem. Can someone give me the sequence to restart phone or turn off from the recovery mode? If this work and it means it's my screen I guess.
Click to expand...
Click to collapse
If you entered the recovery, then press Home button for reboot.
[email protected] 2
my active "died" about 3 times too.. from experimenting on what kernel to use.. before i learned that the kernel for gb aint the same as that for ics or jb...
but I just follow the instructions here: http://talk.sonymobile.com/message/241059
I had no problems "resurecting" my active...
OK thank you guys. I will try to relock the bootloader and see how it goes. BTW when I tried to use SUS I got a message that a modified image (or something) was detected. Is this due to the unlocked bootloader? If I lock it the SUS will also work?
rullean said:
my active "died" about 3 times too.. from experimenting on what kernel to use.. before i learned that the kernel for gb aint the same as that for ics or jb...
but I just follow the instructions here: http://talk.sonymobile.com/message/241059
I had no problems "resurecting" my active...
Click to expand...
Click to collapse
It didn't die while I was experimenting with flash. It was working properly for a long time and just died after a phone call. That's the guide I used to root it and install ICS in the first place. That's of no use now since at step 3 the phone doesn't boot anymore. Blank screen.
Patrol619 said:
If you entered the recovery, then press Home button for reboot.
[email protected] 2
Click to expand...
Click to collapse
Will be there any vibration when restarting? I am looking for a way to see if the phone works and it's just the screen the problem.
2 pages and the most simple solution has not been posted.
Get into recovery mode (press voluke down with phone switched off, then connect the USB cable), and then flash a stock FTF filr using flashtool
Sent from my ST17i using xda app-developers app
Hello dumraden,
I tried your suggestion but still nothing . When press volume down and connect USB cable the led lights green and I suppose I get into flash mode. Is this correct? I am asking because you mentioned recovery mode and I am not sure if it's the same thing.
Also the screen seems to be completely black! Like it doesn't light up at all, not even a light flick.
I also tried loading the rage kernel for 2.3.4 Android and then installing the stock 2.3.4 FTF but I get the following error:
09/019/2012 06:19:19 - INFO - (X10flash.java:230) - Flashing loader
09/019/2012 06:19:19 - DEBUG - (BundleEntry.java:34) - Streaming from file : .\firmwares\prepared\loader.sin
09/019/2012 06:19:19 - INFO - (X10flash.java:388) - Ending flash session
09/019/2012 06:19:19 - ERROR - (X10flash.java:365) -
09/019/2012 06:19:19 - ERROR - (X10flash.java:366) - Error flashing. Aborted
09/019/2012 06:19:19 - INFO - (FlasherGUI.java:831) - Device disconnected
Any ideas? If I untick Wipe data it flashes just fine.
I tried the new Flashtool and didn't gave me this error (with Wipe user data ticked) but still the phone is dead.
I noticed some new symptoms on my phone.
1) When is turned on it doesn't just freeze, it stays with a black screen doing nothing and after several minutes (not always the same time) it turns off again (I call this turn on-off cycle)
2) Today after several flashes I let it rest and after a few turn on-off cycles it actually worked. It worked for couple of minutes and I was even able to make a test call to it and worked but after few minutes it got back to the previous state.
3) I noticed that this turn on-off cycle consumes a lot of battery. After symptom (2) when the phone turned on I noticed that had about 25% battery. 5-6 turn on-off cycles after that the battery was completely drained (led flashes orange when I press the power button).
4) Now the phone can be charged from the wall charger
The phone now has rage kernel for 2.3.4 Android, the official 2.3.4 android of Sony. Also I tried to relock it using this thread http://forum.xda-developers.com/showthread.php?t=1563840 and unbrick it using this thread http://forum.xda-developers.com/showthread.php?t=1553601
I wasn't able to verify if the bootloader was indeed relocked. How can I do this with the phone off? flashtool says "Bootloader: ROOTED"

[Q] Xperia P Bricked

Hi,
I own a Xperia p, running honami moonwalker v8. Recently i decided to upgrade to CM11. I flashed the CM11 unofficial ROM from this website nightly 2 i think. I did a clean install (erase everything and clear cache) But when i pressed reboot (on cwm) i got a black screen. When you hold the power button it vibrates but screen doesnt turn on, the led goes red for about 2sec and goes off. i tried holding power button and volume up but same result, vibrates and nothing comes up. Even when I make it vibrate 3 times, no result. Im desperate guys please help me i will appreciate your help greatly. And if this means anything, when i installed zip from sd card, it just said installing, and after a few minutes, said install complete. Is this normal? since it didnt show anything in between. PLEASE HELP I WILL TRY DONATE TO WHOEVER FIXES MY PROBLEM.
someguyonearth said:
Hi,
I own a Xperia p, running honami moonwalker v8. Recently i decided to upgrade to CM11. I flashed the CM11 unofficial ROM from this website nightly 2 i think. I did a clean install (erase everything and clear cache) But when i pressed reboot (on cwm) i got a black screen. When you hold the power button it vibrates but screen doesnt turn on, the led goes red for about 2sec and goes off. i tried holding power button and volume up but same result, vibrates and nothing comes up. Even when I make it vibrate 3 times, no result. Im desperate guys please help me i will appreciate your help greatly. And if this means anything, when i installed zip from sd card, it just said installing, and after a few minutes, said install complete. Is this normal? since it didnt show anything in between. PLEASE HELP I WILL TRY DONATE TO WHOEVER FIXES MY PROBLEM.
Click to expand...
Click to collapse
Is your bootloader unlocked?
Can you enter flash/fastboot mode?
ChikeD said:
Is your bootloader unlocked?
Can you enter flash/fastboot mode?
Click to expand...
Click to collapse
how do i enter fastboot? no matter what i try, all i get is vibrations screen doesnt light up.
someguyonearth said:
how do i enter fastboot? no matter what i try, all i get is vibrations screen doesnt light up.
Click to expand...
Click to collapse
You did not answer my first question., therefore I am not going to answer yours
ChikeD said:
You did not answer my first question., therefore I am not going to answer yours
Click to expand...
Click to collapse
Ahahaah sorry i think i forgot about them and yes bootloader unlocked
someguyonearth said:
Ahahaah sorry i think i forgot about them and yes bootloader unlocked
Click to expand...
Click to collapse
1. Open flash tool (don't click anything)
2. Turn the phone off, power + volume up until you feel (1+) 3 vibreations.
3. Press the volume up key while connecting the USB cable, led should lit blue and connected in fastboot should be in the log.
4. Repeat 2, press volume down while connectiong the USB cable for flash mode, check flashtool log
If flash mode stays connected for about 45 seconds you can simply try to flash stock with flash tool.
If fastboot stays connected over 20 seconds you can flash custom stock based kernel and flash moonwalker again, or any other custom rom you have on the phone.
If none works, just leave it turned of, charging for one day then try again.
I've seen more than one report of people that recovered XP by disconnecting the battery, though it didn't work for others.

Categories

Resources