ok guys realy stuck on this been trying everthing
keep getting:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> BOOTLOADER_I9300_REV00_user_low_ship.tar.md5 is valid.
<OSM> CODE_I9300XXDLJ4_368423_REV00_user_low_ship.tar.md 5 is valid.
<OSM> MODEM_I9300XXDLID_REV00_user_low_ship.tar.md5 is valid.
<OSM> CSC_BTU_I9300OXADLJ4_368423_MULTI_user_low_ship.ta r.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> sboot.bin
<ID:0/004> NAND Write Start!!
<ID:0/004> Complete(Write) operation failed.
<ID:0/004> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
and i have tryed Kies recovery as well
please any help would be greatfull guys
Could you please let me know if you have solved this problem and how?
Buddhainuk said:
ok guys realy stuck on this been trying everthing
keep getting:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> BOOTLOADER_I9300_REV00_user_low_ship.tar.md5 is valid.
<OSM> CODE_I9300XXDLJ4_368423_REV00_user_low_ship.tar.md 5 is valid.
<OSM> MODEM_I9300XXDLID_REV00_user_low_ship.tar.md5 is valid.
<OSM> CSC_BTU_I9300OXADLJ4_368423_MULTI_user_low_ship.ta r.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> sboot.bin
<ID:0/004> NAND Write Start!!
<ID:0/004> Complete(Write) operation failed.
<ID:0/004> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
and i have tryed Kies recovery as well
please any help would be greatfull guys
Click to expand...
Click to collapse
Could this be caused by a locked bootloader? Are you using an international s3?
Sent from my GT-I9300 using xda premium
Phantogenic said:
Could this be caused by a locked bootloader? Are you using an international s3?
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
The gs3 does NOT have a locked bootloader. The OP has to tell us wat he wants to do. And Nand write fail most probably means the nand memory is destroyed and needs new motherboard.
Sent from my GT-I9300 using xda app-developers app
Because I have the international version I wasnt sure if some versions of the s3 not necessarily the gti9300 were all unlocked. I had read somewhere people were having issues with a possible locked bootloader hence the question.
Sent from my GT-I9300 using xda premium
Phantogenic said:
Because I have the international version I wasnt sure if some versions of the s3 not necessarily the gti9300 were all unlocked. I had read somewhere people were having issues with a possible locked bootloader hence the question.
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
Only verizon gs3 have locked bootloaders I think. The international one do not have a locked bootloader.
Sent from my GT-I9300 using xda app-developers app
He didnt say what type of s3 he had. We'd need more info.
Sent from my GT-I9300 using xda premium
Phantogenic said:
He didnt say what type of s3 he had. We'd need more info.
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
He did in two ways.
(1) The forum
(2) The log
Sent from my GT-I9300 using xda app-developers app
JellyYogurt said:
He did in two ways.
(1) The forum
(2) The log
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
I'm sorry, I'm not usually one for having a go or derailing a thread... but...
1. The OP has not explained his type of phone. It could be from anywhere. Have a different model code or anything. Korean? American? Canadian? Singapore?
2. The log doesn't say what type of phone he has, merely that he is trying to install that particular rom to it, for all we know it could be the wrong rom.
So to the OP what is your exact Model Number. Where are you from? Are you sure the rom you are installing is the correct one for your phone?
Are you just connecting the phone? or are you in download mode?
Phantogenic said:
I'm sorry, I'm not usually one for having a go or derailing a thread... but...
1. The OP has not explained his type of phone. It could be from anywhere. Have a different model code or anything. Korean? American? Canadian? Singapore?
2. The log doesn't say what type of phone he has, merely that he is trying to install that particular rom to it, for all we know it could be the wrong rom.
So to the OP what is your exact Model Number. Where are you from? Are you sure the rom you are installing is the correct one for your phone?
Are you just connecting the phone? or are you in download mode?
Click to expand...
Click to collapse
If he is smart and flashes the correct rom and is on the correct forum, his phone shld be Gt-i9300, the international model.
Sent from my GT-I9300 using xda app-developers app
You guys realise the OP was made in December 2012? The second poster resurrected a dead post seeking a non-existent solution. The OP's phone has probably been landfill for over a year now.
Sent from my GT-I9300 using Tapatalk
JellyYogurt said:
If he is smart and flashes the correct rom and is on the correct forum, his phone shld be Gt-i9300, the international model.
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
Hahaha brilliant!
Sent from my GT-I9300 using xda premium
Related
I installed CWM touch, and superuser zip folder on my Galaxy note (att)
So I read a tut that said to wipe everything so I did on recovery mode, booted it up, worked good, went back because superuser didnt work right. I installed 3-4 times before it said success, now its goes to a crisp samsung logo, then goes blurry and stops.....
Stupid noob mistake I didnt backup anything. Figured it was simple as jailbreaking an iphone (which you cant mess up on, plug in, hit button, done)
I been trying it all but just cant get it to work.
If your phone still boots up
youre not bricked...
Odin back to a stock firmware (GB or ICS)
and start again
jayRokk said:
If youre phone still boots up
youre not bricked...
Odin back to a stock firmware (GB or ICS)
and start again
Click to expand...
Click to collapse
+1.
And if you can't find how to do that, you need to read more before flashing
Sent from my SAMSUNG-SGH-I717 using Tapatalk 2
It boots to the samsung logo, but not lock screen. And I'm phoneless now Lol.
Since I was just updated to ICS (att) and did CWM/superuser, would I just have to use odin>PDA with a tar file?
if so which file? I tried that but no luck.
welchertc said:
+1.
And if you can't find how to do that, you need to read more before flashing
Sent from my SAMSUNG-SGH-I717 using Tapatalk 2
Click to expand...
Click to collapse
I been reading alot but seems like there is a hundred different explanations or ways to do it, and hard to find the right way?
liftedzuki said:
Since I was just updated to ICS (att) and did CWM/superuser, would I just have to use odin>PDA with a tar file?
if so which file? I tried that but no luck.
Click to expand...
Click to collapse
Yes its a .tar file
And search for it buddy there is a whole thread on official ICS and with it the CWM file and SU file to get you going
Sent from my SAMSUNG-SGH-I717 using Tapatalk 2
http://forum.xda-developers.com/showthread.php?t=1566976
Tried this tar, and it
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> FixRecovery.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> zImage
<ID:0/005> NAND Write Start!!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
liftedzuki said:
http://forum.xda-developers.com/showthread.php?t=1566976
Tried this tar, and it
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> FixRecovery.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> zImage
<ID:0/005> NAND Write Start!!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
You need to stop flashing before you mess up your phone
Stop and read
Why are you flashing that?!?!?!
You have an NOTE
Really stop and read read read
I'm surprised you haven't bricked it yet
Sent from my SAMSUNG-SGH-I717 using Tapatalk 2
jayRokk said:
You need to stop flashing before you mess up your phone
Stop and read
Why are you flashing that?!?!?!
You have an NOTE
Really stop and read read read
I'm surprised you haven't bricked it yet
Sent from my SAMSUNG-SGH-I717 using Tapatalk 2
Click to expand...
Click to collapse
:silly: I got it from a link in this note section, I should have seen that though.
So if I flash it, does it flash over the other flash? or does it add to it.
I'll continue readin.
Not all Samsung's are the same. You should only be getting tar files from your specific section. Keep in mind you need to match the model number
Sent from my SPH-L710 using Tapatalk 2
I would suggest going here and flashing one of these one clicks in Odin:
http://forum.xda-developers.com/showthread.php?t=1647756
Sent from my SPH-L710 using Tapatalk 2
And if I'm not mistaken you want the first link. I don't have a note so maybe someone here can chime in.
Sent from my SPH-L710 using Tapatalk 2
That link worked good. Thanks so much to everyone, I about had a heartache as I got my phone like 3 months ago, and just got ICS on it.
This time I'm gonna read alot more before I try it again.
Good idea. Glad it worked. If ya ever have any questions in the future , don't hesitate to ask BEFORE flashing.
Sent from my SPH-L710 using Tapatalk 2
Definitely not gonna be doing it til next weekend. I didnt plan on doing it today just was messin with my phone since galaxy S3 is out, and wanting to make my phone a little cooler, and did it before I had lots of research under my belt. :silly:
Haha it happens. Just be glad ya didn't end up with a huge note shaped paperweight
Sent from my SPH-L710 using Tapatalk 2
liftedzuki said:
Definitely not gonna be doing it til next weekend. I didnt plan on doing it today just was messin with my phone since galaxy S3 is out, and wanting to make my phone a little cooler, and did it before I had lots of research under my belt. :silly:
Click to expand...
Click to collapse
OP if your good to go, can you put Solved in your title....
thank you sir
Dear Friends
I tried to upload new Rom to my Samsung Galaxy S2 but it field and now even I can't get download mode only what I get is picture of (device---Attention---PC),
could you help me to get download mode again?
...
MistahBungle said:
That is download mode. Forced download mode. It's forcing you to flash something to get it going again. Flash a stock rom in Odin.
Click to expand...
Click to collapse
Thanks Man to reply, could you help me to official Rom to download it please?
...
The link below is a thread containing instructions on how to flash a stock firmware and also a list of the stock firmwares that are available.
http://forum.xda-developers.com/showthread.php?t=1075278
Sent from my GT-I9100 using Tapatalk 2
MistahBungle said:
Here or Samfirmware. Or even the PC version of Checkfus. I'd try the first two places initially.
Click to expand...
Click to collapse
Thanks Man,
I will do my best...
...
MistahBungle said:
No probs. Follow the flashing instructions in the thread that Nicholas1520 linked to. Any issues, post here. But have a go at it yourself first. You'll learn plenty going thru this
Click to expand...
Click to collapse
OK thanks boys,
I'm going throw it carefully and I will post anything later
MistahBungle said:
No probs. Follow the flashing instructions in the thread that Nicholas1520 linked to. Any issues, post here. But have a go at it yourself first. You'll learn plenty going thru this
Click to expand...
Click to collapse
Dear Friends,
I downloaded two of these Roms, and I can see the device downloadable in Odin3 and I selected in PDA then I pressed start, the software (Odin3) start to upload till I got Fail...
see this codes:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> GT-I9100_ITV_I9100XWLPF_I9100OXILP6_I9100XXLPX.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> boot.bin
<ID:0/004> NAND Write Start!!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Try using Odin 1.85:
http://db.tt/XSY1G5Ye
You should try another firmware and see of that's the case because your doing everything good so far.
Sent from my GT-I9100 using Tapatalk 2
nicholas1520 said:
Try using Odin 1.85:
http://db.tt/XSY1G5Ye
You should try another firmware and see of that's the case because your doing everything good so far.
Sent from my GT-I9100 using Tapatalk 2
Click to expand...
Click to collapse
Ok I will do my best with it,,, I will inform you later,,,
...
MistahBungle said:
Also, after you open Odin & before you start flashing, make sure you check Windoze Task Manager & close Kies/any associated processes if they're running.
And...Do you definitely have an I9100 or I9100T ? Check the sticker on the phone chassis under the battery to be doubly sure if you need to.
Click to expand...
Click to collapse
Ok, I'm already Using v.1.85 and I tried again by using different USB cable, my Device is I9100G, I did start again and its freezing now see this :
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> GT-I9100_ITV_I9100XWLPF_I9100OXILP6_I9100XXLPX.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
...
MistahBungle said:
OK. There's your problem right there. You have an I9100G. I think you'll find you tried to flash a rom for the I9100/T which caused it to get into a state where it won't boot/forced download mode.
You need to download & flash an I9100G stock rom. I don't have any experience with the I9100G (apart from seeing posts on here from people who have them), but look in this thread (I don't know which one you should use tho).
Edit - And be careful in future, only flash roms/kernels specifically for the I9100G
Click to expand...
Click to collapse
OK, I will check it carefully.... Thanks for your support...
alisaher2000 said:
OK, I will check it carefully.... Thanks for your support...
Click to expand...
Click to collapse
Dear Friends,
I solved it by applying uploading Rom for I9100G via Odin3 v.1.85... Thanks for all supports....
:good:
...
Dear Friends
I HAVE MESS-UP WITH MY i9300!!!!
The incident is I was using custom rom, and installed some stupid app called "Adblock" or something,
and then, my phone just keep went-off for about 8-10 times a day. So then, I decided to reflash
custom rom by CWM, and after I pressed install in Aroma Installer, it just kick me out all of sudden, and
then, I couldn't get back to CWM anymore, so I decided to flash some stock rom by odin, but what
had happen was it starts until "Nand write start" and stacked for a while, and then just FAIL me.
On the net, I found that Checkrom Resurrection V4 could rescue softbrick i9300, I tried, but
no luck either. Finally, just now, I tried a 3 files stock rom with pit, and it came out as:
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CODE_I9300XXALE8_554452_REV00_user_low_ship.tar.md 5 is valid.
<OSM> MODEM_I9300XXLE8_REV02_REV04_CL1145430.tar.md5 is valid.
<OSM> CSC_OJV_I9300OJVALE7_CL547448_REV00_user_low_noshi p.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Set PIT file..
<ID:0/005> DO NOT TURN OFF TARGET!!
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> sboot.bin
<ID:0/005> NAND Write Start!!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<ID:0/005> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/005> Removed!!
What I have done:
1. reflash custom rom by CWM
2. 3 wipes - (but I am no longer to get back to CWM)
3. flash stock rom - hong kong combo firmware @ Samfirmware - by Odin
4. flash Checkrom Resurrection V4 by Odin
5. flash stock rom - 3 files firmware + pit - by Odin
6. changed usb port
7. changed PC
8. uninstall all applications relative to Kies
have you guys got any idea what can I do? I am thinking to mess-up the phone even badly (till it couldn't switch on), so that I can take it to Samsung Service Center for warranty replacement, but have you got ANY method I can do that to mess it up? Or anything I can over-come from the soft (or hard) brick. PLEASE Give me some help guys. I am very struggle.
Wrong thread.. Needs to be in Q&A
Try a fully stock rom with Odin 1.85
Sent from my GT-I9300 using xda app-developers app
Kingybear said:
Try a fully stock rom with Odin 1.85
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
Thanks Mate, but no luck
<ID:0/009> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CODE_I9300XXALE8_554452_REV00_user_low_ship.tar.md5 is valid.
<OSM> MODEM_I9300XXLE8_REV02_REV04_CL1145430.tar.md5 is valid.
<OSM> CSC_OJV_I9300OJVALE7_CL547448_REV00_user_low_noship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/009> Odin v.3 engine (ID:9)..
<ID:0/009> File analysis..
<ID:0/009> SetupConnection..
<ID:0/009> Initialzation..
<ID:0/009> Set PIT file..
<ID:0/009> DO NOT TURN OFF TARGET!!
<ID:0/009> Get PIT for mapping..
<ID:0/009> Firmware update start..
<ID:0/009> sboot.bin
<ID:0/009> NAND Write Start!!
<ID:0/009>
<ID:0/009> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
NatTheCat said:
Wrong thread.. Needs to be in Q&A[/QUOT
I put it on Q&A already, but just wanted to have more people can help, so I put it on here. sorry for any disturb.
Click to expand...
Click to collapse
The fact that you want more people helping you doesnt mean that you can do what you want, wrong section.
By the way, it seems that your s3 is bricked pal.
Sent from my GT-I9300 using Tapatalk
anyone can tell me how to delete the thread? Thanks
aguerito said:
The fact that you want more people helping you doesnt mean that you can do what you want, wrong section.
By the way, it seems that your s3 is bricked pal.
Sent from my GT-I9300 using Tapatalk
Click to expand...
Click to collapse
show the poor guy some love dude, your comments are abrasive he only wants help for his expensive phone sheesh
---------- Post added at 10:03 AM ---------- Previous post was at 09:59 AM ----------
I wouldnt panic yet they say its very hard to brick an S3?
check around and see what you can find out
kk12175 said:
Thanks Mate, but no luck
<ID:0/009> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CODE_I9300XXALE8_554452_REV00_user_low_ship.tar.md5 is valid.
<OSM> MODEM_I9300XXLE8_REV02_REV04_CL1145430.tar.md5 is valid.
<OSM> CSC_OJV_I9300OJVALE7_CL547448_REV00_user_low_noship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/009> Odin v.3 engine (ID:9)..
<ID:0/009> File analysis..
<ID:0/009> SetupConnection..
<ID:0/009> Initialzation..
<ID:0/009> Set PIT file..
<ID:0/009> DO NOT TURN OFF TARGET!!
<ID:0/009> Get PIT for mapping..
<ID:0/009> Firmware update start..
<ID:0/009> sboot.bin
<ID:0/009> NAND Write Start!!
<ID:0/009>
<ID:0/009> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
I think it's rom problems dude... I never encounter any problems for adblock app... Which rom did u flashed
Sent from my GT-I9300 using xda premium
jothi2lingam said:
I think it's rom problems dude... I never encounter any problems for adblock app... Which rom did u flashed
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
i was using Omega since v.9 until v33.2 at the last minute. and I found a video in youtube to resurrect my s3 by flashing Checkrom v4:
http://www.youtube.com/watch?v=ZNaQfdOi56E
tried it as well, but it seems doesn't work as it kept rebooting / hanging at the Galaxy S3 logo. And I tried to flashed some stock rom (combo file) from Samfirmware, no luck neither. Tried to flash some stock rom (3 files + pit) HK base rom. Same happened. Fail after Nand Write Start.:silly:
and now, couldn't get into CWM neither.
jothi2lingam said:
I think it's rom problems dude... I never encounter any problems for adblock app... Which rom did u flashed
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
Been using adblock for a while myself and never had a hiccup .. excellent app..
Probably mother board died. Same problem with my sister S3. Take to Samsung and use the warranty. :banghead:
Sent from my GT-I9300 using xda premium
johnkhor123 said:
Probably mother board died. Same problem with my sister S3. Take to Samsung and use the warranty. :banghead:
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
I had flashed custom rom before, do you think I can still use the warranty? If yes, definitely going.
kk12175 said:
Dear Friends
I HAVE MESS-UP WITH MY i9300!!!!
The incident is I was using custom rom, and installed some stupid app called "Adblock" or something,
and then, my phone just keep went-off for about 8-10 times a day. So then, I decided to reflash
custom rom by CWM, and after I pressed install in Aroma Installer, it just kick me out all of sudden, and
then, I couldn't get back to CWM anymore, so I decided to flash some stock rom by odin, but what
had happen was it starts until "Nand write start" and stacked for a while, and then just FAIL me.
On the net, I found that Checkrom Resurrection V4 could rescue softbrick i9300, I tried, but
no luck either. Finally, just now, I tried a 3 files stock rom with pit, and it came out as:
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CODE_I9300XXALE8_554452_REV00_user_low_ship.tar.md 5 is valid.
<OSM> MODEM_I9300XXLE8_REV02_REV04_CL1145430.tar.md5 is valid.
<OSM> CSC_OJV_I9300OJVALE7_CL547448_REV00_user_low_noshi p.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Set PIT file..
<ID:0/005> DO NOT TURN OFF TARGET!!
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> sboot.bin
<ID:0/005> NAND Write Start!!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<ID:0/005> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/005> Removed!!
What I have done:
1. reflash custom rom by CWM
2. 3 wipes - (but I am no longer to get back to CWM)
3. flash stock rom - hong kong combo firmware @ Samfirmware - by Odin
4. flash Checkrom Resurrection V4 by Odin
5. flash stock rom - 3 files firmware + pit - by Odin
6. changed usb port
7. changed PC
8. uninstall all applications relative to Kies
have you guys got any idea what can I do? I am thinking to mess-up the phone even badly (till it couldn't switch on), so that I can take it to Samsung Service Center for warranty replacement, but have you got ANY method I can do that to mess it up? Or anything I can over-come from the soft (or hard) brick. PLEASE Give me some help guys. I am very struggle.
Click to expand...
Click to collapse
Try TURN OFF antivirus, update Kies, Try on other OS.
Because I had the same problem with own S3.
Windows 8, AVG IS 2013, Odin 3.07,3.04.
Everytime after few second Odin stop working and show FAIL "Complete(Write) operation failed."
But on Windows 7, updated Kies to 2.5, turned off AVG, Odin 3.07, fresh downloaded rom ELK4, Galaxy S3 slowly but finished NAND write
and now I am happy againg
johnkhor123 said:
Probably mother board died. Same problem with my sister S3. Take to Samsung and use the warranty. :banghead:
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
Ya i think so,,Same incident for previously after flashed one of the rom from this thread i went to sleep..The phone was reboot itself (stuck in bootloop) till i found at morning, my phone fuc**ing hot stucked in Samsung Galaxy SIII. After tried flashed using odin & using cwm not worked because my phone keep on rebooting. Once send to sammy centre i said that i put in charge, once wakeup in morning my phone keep on rebooting & so hot. So after one week they replace me new board for my s3 even they can see my cwm. I tried to delete cwm but cant. Thank god atlast they replace my s3. so only way is send to samsung centre. I face exactly same issue previously as you facing now
KKTHX said:
Try TURN OFF antivirus, update Kies, Try on other OS.
Because I had the same problem with own S3.
Windows 8, AVG IS 2013, Odin 3.07,3.04.
Everytime after few second Odin stop working and show FAIL "Complete(Write) operation failed."
But on Windows 7, updated Kies to 2.5, turned off AVG, Odin 3.07, fresh downloaded rom ELK4, Galaxy S3 slowly but finished NAND write
and now I am happy againg
Click to expand...
Click to collapse
sounds good. give it a try .. thanks MATE
kk12175 said:
anyone can tell me how to delete the thread? Thanks
Click to expand...
Click to collapse
Thread closed.
Hello.
So, I will explain what i did first.
Last night, I was trying to root my note 2, using following link.
http://galaxynote2root.com/galaxy-note-2-root/how-to-root-verizon-galaxy-note-2-sch-i605/
(it was the first link from google search, stupid me...)
Anyway, after following instruction on that link, my phone got stuck in a boot loop. (ie. when i turn on, the samsung screen comes on, then verizon LTE and then back to samsung and so on.)
So, I tried to fix using following links
http://galaxynote2root.com/galaxy-n...ootunbrick-galaxy-note-2-with-stock-firmware/
http://forum.xda-developers.com/showthread.php?t=2272066&page=18
http://forums.androidcentral.com/ve...-do-i-restore-sboot-bin-causes-odin-fail.html
Samsung Kies
and still can't fix it.
Since you need more than these, here are some results from running odin, etc.
When I run odin with PDA file, I get following
<ID:0/008> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CI605_I605VRLJB_I605VRALJB_CL414933_HWID04_HW-Rev0406_low_ship_user.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Get PIT for mapping..
<ID:0/008> Firmware update start..
<ID:0/008> boot.img
<ID:0/008> NAND Write Start!!
<ID:0/008> cache.img
<ID:0/008> hidden.img
<ID:0/008> modem.bin
<ID:0/008> param.bin
<ID:0/008> recovery.img
<ID:0/008> sboot.bin
<ID:0/008>
<ID:0/008> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
When I power up the machine, I get following message.
"Firmware upgrade encountered an issue. Please select recovery mode in Kies &try again"
However, when I connect with Kies, Kies won't recognize my phone, and cannot go into recovery.
When I try CASUAL to unbrick, CASUAL doesn't connect. Also, when I try the download mode (via double-clicking the "DISCONNECTED"), it still can't recognize.
On "My computer", I do not see the I drive (my phone), so I don't think it is connecting....?
I have tried deleting driver and installing and Zadig program as well.
Can anyone help me with going back to original condition?
I would really appreciate and more than willing to pay for your effort.
Please help me.
Let me know, if you need more results.
http://forum.xda-developers.com/showthread.php?p=39299305
Please read the stickies. There's your answer right at the top of this page. Also, I think you learned, but I highly recommend you stay with xda for guides. As you can see these sites just repost xda info and a lot if times it's incorrect or out of date and result in a brick.
Or you could have skimmed and saw where this was addressed just yesterday.
http://forum.xda-developers.com/showthread.php?p=37255435
Sent from my SGH-T889 using xda app-developers app
Did you include the pit file? That may be the problem. Also make sure you right click odin and run as administrator.
Sent from my SCH-I605 using Tapatalk 2
Lodingi it's not the pit. It's a locked bootloader and the op trying to write sboot.bin (which is blacklisted on the newer updates. That's why we use alternate restore because it doesn't contain sboot.bin so it will pass on Odin.
Edit to fix your name, sorry
Sent from my SGH-T889 using xda app-developers app
kintwofan said:
Lodingi it's not the pit. It's a locked bootloader and the op trying to write sboot.bin (which is blacklisted on the newer updates. That's why we use alternate restore because it doesn't contain sboot.bin so it will pass on Odin.
Edit to fix your name, sorry
Sent from my SGH-T889 using xda app-developers app
Click to expand...
Click to collapse
Gotcha. Thanks.
Sent from my SCH-I605 using Tapatalk 2
Lodingi said:
Gotcha. Thanks.
Sent from my SCH-I605 using Tapatalk 2
Click to expand...
Click to collapse
Ya man, i typed lodingo at first, I guess I edited it before you even saw.
Sent from my SGH-T889 using xda app-developers app
Looks like I'm running into a brick wall trying to root this damn phone. first I soft bricked I but thankfully recovered but now after trying to root unlock using Casual and getting errors with generic usb drivers while in download mode I figured I'd be happy enough with just a root but ran into issues there as well. I'm currently running android 4.3 and every time I run Odin I get the following. I have tried v3.09. 3.07 and 1.87 and get the exact same error. I never had this much trouble rooting and unlocking my AT&T note 2 but Verizon is a nightmare. BTW I tried about 6 different versions of Casual and none worked. All of them take me to the recovery download screen and error out due to various reasons. In any case If anyone can guide me to get my I605 rooted, I would greatly appreciate it. On a side note could I downgrade to root66 rom and get rooted that way or would that brick my device? After that can I install custom roms? I don't have warranty any more and don't care about that. Just want root and custom roms and maybe an unlock
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CF-Auto-Root-t0ltevzw-t0ltevzw-schi605.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Removed!!
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> recovery.img
<ID:0/005> NAND Write Start!!
<ID:0/005> FAIL!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
This won't work on stock 4.3 rom.... There is only one way of rooting and that is not recommended at xda.... But bootloader will not unlock at present
Sent from my SCH-I605 using XDA Premium 4 mobile app
nikhil.kdhand said:
This won't work on stock 4.3 rom.... There is only one way of rooting and that is not recommended at xda.... But bootloader will not unlock at present
Sent from my SCH-I605 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Thanks for the response, I was afraid of that I guess ill have to wait until there is a bootloader unlocker available for it. That one method you talk of is kingo right?
Ya... Kingo is the only option that I know
Sent from my SCH-I605 using XDA Premium 4 mobile app