Related
So i read up on installing a rom. I rooted my galaxy s3 from tmobile and everthing. I tried to install DragonICS rebirth rom and everything went great. The installation and everything. So then It asked me to reboot and i did. but now it doesnt turn on. I tried to hold down lock,home,and up volume/down volume. Took off battery. I tried everything and It wont turn on. It doesn't even charge. Please help.
garciaomar0203 said:
So i read up on installing a rom. I rooted my galaxy s3 from tmobile and everthing. I tried to install DragonICS rebirth rom and everything went great. The installation and everything. So then It asked me to reboot and i did. but now it doesnt turn on. I tried to hold down lock,home,and up volume/down volume. Took off battery. I tried everything and It wont turn on. It doesn't even charge. Please help.
Click to expand...
Click to collapse
Did you make a nandroid backup of the previous rom and can you get in recovery mode?
if yes restore the backup (ALWAYS MAKE A NANDROID BACKUP OF A WORKING ROM) or reflash the rom ( wipe cache, dalvikcache, data/factory reset and format system in mounts and storage), If you can`t try to get in downloadmode and flash a stock rom and reroot.
You flashed the rom on what model no? That and infact all the roms here are made for i9300
Sounds like you've bricked it.
Make sure the rom you are flashing supports your device model.
garciaomar0203 said:
So i read up on installing a rom. I rooted my galaxy s3 from tmobile and everthing. I tried to install DragonICS rebirth rom and everything went great. The installation and everything. So then It asked me to reboot and i did. but now it doesnt turn on. I tried to hold down lock,home,and up volume/down volume. Took off battery. I tried everything and It wont turn on. It doesn't even charge. Please help.
Click to expand...
Click to collapse
Your device was/is i9300 (international) or US model? If your's was a US model than you're one of many who have flashed wrong ROM.
sak500 said:
Your device was/is i9300 (international) or US model? If your's was a US model than you're one of many who have flashed wrong ROM.
Click to expand...
Click to collapse
Then what is there left to do? I flashed my US SGS3 with omega 9.0... does not turn on. Does not boot at all :S
I would appreciate any help. Thanks.
Cheesie1 said:
Then what is there left to do? I flashed my US SGS3 with omega 9.0... does not turn on. Does not boot at all :S
I would appreciate any help. Thanks.
Click to expand...
Click to collapse
Omega 9 is for the I9300 only. If you can't get it to turn on, you are bricked and therefore there is nothing you can do to fix it.
Sent from my GT-I9300 using Xparent Purple Tapatalk 2
I really think that the developers should warn in HUGE bright red letters on the FIRST page of every ROM, that THESE are NOT for U.S. versions of the Galaxy S III.
Really getting old seeing people bricking their phones all the time because they can't take 5 minutes to read 1) What section the are in and 2) All of the information before attempting to install ROM's.
Baldilocks said:
I really think that the developers should warn in HUGE bright red letters on the FIRST page of every ROM, that THESE are NOT for U.S. versions of the Galaxy S III.
Really getting old seeing people bricking their phones all the time because they can't take 5 minutes to read 1) What section the are in and 2) All of the information before attempting to install ROM's.
Click to expand...
Click to collapse
I agree. People have to learn to read before doing this stuff. Before I flashed my S2 I read stuff for a month to make sure I knew what I was doing.
Sent from my GT-I9300 using Xparent Purple Tapatalk 2
Sword Fish said:
I agree. People have to learn to read before doing this stuff. Before I flashed my S2 I read stuff for a month to make sure I knew what I was doing.
Sent from my GT-I9300 using Xparent Purple Tapatalk 2
Click to expand...
Click to collapse
I do kind of agree with this but at the same time if you’re silly enough not to read all the info, then you deserve a brick. 9/10 roms state very clearly what the supported devices are.
It's like the fine print on a contract at the bank really.
All the threads are under "Samsung Galaxy S III I9300". I9300 should be enough to make people realize that they are in wrong forum
Sorry , wrong thread selected...Mods please forgive me & kindly delete my post !!
watsa said:
All the threads are under "Samsung Galaxy S III I9300". I9300 should be enough to make people realize that they are in wrong forum
Click to expand...
Click to collapse
Most people only go by the Galaxy S III name. This is one of the MAIN reasons why I think that carrier branded phones should have their own unique names.
I have a vibrant galaxy s 4g salsung
Sgh t959v this is what it says under the battery.
My problem: I wanted to change the Odin 1.7 firmware with this flash:
T959UVJFD
Everything goes well.
not mark any errors
just not my turn vibrant Galaxy
is restarting again and again
barely get the vibrant logo turns off and restarts
And down many times the firmware for any errors down
Not to do .... I have searched information in many forums in Spanish and I find nothing.
speak English is little so use google translator, sorry my bad translation because my native language is Spanish.
I hope to help me with this problem and I have 3 days without my phone.
I have the same problem . At frist i think vibrant and vibrant 4G is the same , I try to up new rom by AIO Vibrant Toolbox 2.5, everything ok. But when it reboot i knew something horrible was happened .
depa16 said:
I have a vibrant galaxy s 4g salsung
Sgh t959v this is what it says under the battery.
My problem: I wanted to change the Odin 1.7 firmware with this flash:
T959UVJFD
Everything goes well.
not mark any errors
just not my turn vibrant Galaxy
is restarting again and again
barely get the vibrant logo turns off and restarts
And down many times the firmware for any errors down
Not to do .... I have searched information in many forums in Spanish and I find nothing.
speak English is little so use google translator, sorry my bad translation because my native language is Spanish.
I hope to help me with this problem and I have 3 days without my phone.
Click to expand...
Click to collapse
This is the Samsung Vibrant thread you need the Samsung Galaxy 4g thread. They are 2 totally different phones, you can NOT flash Vibrant ROMS onto your Galaxy 4g. They are pretty much the same phone but yours is 4g and our Vibrants are 3g, big difference. Here if the odin to stock guide for your phone http://forum.xda-developers.com/showthread.php?t=1001759
Sent from my SGH-T959 using xda premium
gavn321 said:
I have the same problem . At frist i think vibrant and vibrant 4G is the same , I try to up new rom by AIO Vibrant Toolbox 2.5, everything ok. But when it reboot i knew something horrible was happened .
Click to expand...
Click to collapse
brother ... we're screwed
Whether you use this version of Aio tool Box
flashee the pit and the PDA that comes in that tool.
all goes well but never gets off the mobile.
I see that this model is slightly modified compared to the Samsung Galaxy S Standard
depa16 said:
brother ... we're screwed
Whether you use this version of Aio tool Box
flashee the pit and the PDA that comes in that tool.
all goes well but never gets off the mobile.
I see that this model is slightly modified compared to the Samsung Galaxy S Standard
Click to expand...
Click to collapse
Read my post above yours.......
Sent from my SGH-T959 using xda premium
iTz KeeFy said:
This is the Samsung Vibrant thread you need the Samsung Galaxy 4g thread. They are 2 totally different phones, you can NOT flash Vibrant ROMS onto your Galaxy 4g. They are pretty much the same phone but yours is 4g and our Vibrants are 3g, big difference. Here if the odin to stock guide for your phone http://forum.xda-developers.com/showthread.php?t=1001759
Sent from my SGH-T959 using xda premium
Click to expand...
Click to collapse
While different models that are
The T959 is one and the T959v is another.
someone who has solution to this problem???
I think with a full Flash has to solve.
a flash comes: PDA, Phone, CSC
I can't put my SGS 4G into download mode how can i fix it
depa16 said:
brother ... we're screwed
Whether you use this version of Aio tool Box
flashee the pit and the PDA that comes in that tool.
all goes well but never gets off the mobile.
I see that this model is slightly modified compared to the Samsung Galaxy S Standard
Click to expand...
Click to collapse
I read
but my problem seeks
the flashing goes well
but ceulular restarts again and again
never gets to the part where you install the system app:
gavn321 said:
I can't put my SGS 4G into download mode how can i fix it
Click to expand...
Click to collapse
Hold it down the volume keys after you connect the USB cable
I will leave a message
thanks bro, my problem is pass.
gavn321 said:
thanks bro, my problem is pass.
Click to expand...
Click to collapse
as? it manage??
tell us what was your mobile
and answers?? please help
depa16 said:
and answers?? please help
Click to expand...
Click to collapse
I'm sorry but I'm not sure what your asking me? The samsung vibrant (t959) and the samsung galaxy s 4g (t959v) are two different phones. This is the samsung vibrant (t959) section, you need to be in the t959v section. I posted the link in an earlier post, here it is again http://forum.xda-developers.com/showthread.php?t=1001759
Sent from my SGH-T959 using xda premium
iTz KeeFy said:
I'm sorry but I'm not sure what your asking me? The samsung vibrant (t959) and the samsung galaxy s 4g (t959v) are two different phones. This is the samsung vibrant (t959) section, you need to be in the t959v section. I posted the link in an earlier post, here it is again http://forum.xda-developers.com/showthread.php?t=1001759
Sent from my SGH-T959 using xda premium
Click to expand...
Click to collapse
fix the problem with this:
http://forum.xda-developers.com/showthread.php?t=1183413
Grasias for the support!
Android goes to 4 full with Cyanogen mod 9
depa16 said:
fix the problem with this:
http://forum.xda-developers.com/showthread.php?t=1183413
Grasias for the support!
Android goes to 4 full with Cyanogen mod 9
Click to expand...
Click to collapse
nice!
Sent from my SGH-T959 using xda premium
Hello Friends,
I am in desperate need of your help.
I am a moderate user and I know how to stuffs about Rooting and flashing custom ROMs.
Today I tried to flash CM9 stable ROM for International Galaxy S2 I9100. I did it using temporary CWM.zip file and everything went just fine till the installation of ROM. But when I clicked Wipe Data, suddenly phone went off and now it doesn't start.
I tried everything, tried to enter into Download mode and Recovery mode but all was in vain.
Please help me what should I do now? And is my phone ever going to come back to life?
Additional Info
satish0101 said:
Hello Friends,
I am in desperate need of your help.
I am a moderate user and I know how to stuffs about Rooting and flashing custom ROMs.
Today I tried to flash CM9 stable ROM for International Galaxy S2 I9100. I did it using temporary CWM.zip file and everything went just fine till the installation of ROM. But when I clicked Wipe Data, suddenly phone went off and now it doesn't start.
I tried everything, tried to enter into Download mode and Recovery mode but all was in vain.
Please help me what should I do now? And is my phone ever going to come back to life?
Click to expand...
Click to collapse
To add into this.
I was using,
PDA: I9100XWLPT
CSC: I9100NEELP4
Version: 4.0.4
Do you know what kernal you had at the time, for the phone to go off during a wipe sounds like the brick bug but I didn't think it was present in LPT. Can other members clarify please. Does your phone charge when plugged into charger?
Sent from my GT-I9100 using xda premium
satish0101 said:
To add into this.
I was using,
PDA: I9100XWLPT
CSC: I9100NEELP4
Version: 4.0.4
Click to expand...
Click to collapse
I'm sorry but that's your fault.
It's being said 1 million times already, that wiping your data in CWM while running stock 4.0.4 ROM with a stock kernel will BRICK your phone.
Your inability to read might have left your phone bricked.
Read through the forum next time, ask questions if you don't understand anything and I can assure you will be luckier next time.
Swyped from my Samsung Galaxy SII
Yes there are many threads in this section and on xda portal warning you about the brick bug...
Almost all 4.0.4 have a brick bug... moreover it is caused when we do a data wipe. I believe you have bricked your device... sorry for that
Sent from my GT-I9100 using Tapatalk 2
sachidanand444 said:
Yes there are many threads in this section and on xda portal warning you about the brick bug...
Almost all 4.0.4 have a brick bug... moreover it is caused when we do a data wipe. I believe you have bricked your device... sorry for that
Sent from my GT-I9100 using Tapatalk 2
Click to expand...
Click to collapse
Hi, I thought the brick bug was present in only the leaked firmwares and those highlighted on samfirmware eg the Russian release LQ6 I think.
Sent from my GT-I9100 using xda premium
HANDSY said:
Hi, I thought the brick bug was present in only the leaked firmwares and those highlighted on samfirmware eg the Russian release LQ6 I think.
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
that's why I blamed you for this. You did not read or ask before wiping but was only guessing.
This is a sticky thread under General section warning everyone about the buck bug. Here: http://forum.xda-developers.com/showthread.php?t=1756242
I and many others have also warned people about this bug but the unfortunate thing is that most of ask these kind of questions after the problem has occurred.
Swyped from my Samsung Galaxy SII
Jokesy said:
that's why I blamed you for this. You did not read or ask before wiping but was only guessing.
Swyped from my Samsung Galaxy SII
Click to expand...
Click to collapse
Er I'm not the OP
Sent from my GT-I9100 using xda premium
HANDSY said:
Hi, I thought the brick bug was present in only the leaked firmwares and those highlighted on samfirmware eg the Russian release LQ6 I think.
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
As far as I know all 4.0.4 ROMS have MMC_CAP_ERASE enabled, so in case of having bad chip and using wipe under temporary CWM floating around you will brick your phone. Although seems the problem is only in touch version of CWM. More detailed information can be found in 1st guide in my signature where Phil was talking with Entropy512.
Odoslané z GT-I9100 cez Tapatalk 2
Stileth said:
As far as I know all 4.0.4 ROMS have MMC_CAP_ERASE enabled, so in case of having bad chip and using wipe under temporary CWM floating around you will brick your phone. Although seems the problem is only in touch version of CWM. More detailed information can be found in 1st guide in my signature where Phil was talking with Entropy512.
Odoslané z GT-I9100 cez Tapatalk 2
Click to expand...
Click to collapse
Will do thanks
Sent from my GT-I9100 using xda premium
^^Not only with touch CWM but also with "temporary CWM" wjich is what you were using.
Take it to a service center as your phone now needs a motherboard replacement..and I hope you still have warranty..!
Sent from my GT-I9100 using Tapatalk 2
satish0101 said:
Hello Friends,
I am in desperate need of your help.
I am a moderate user and I know how to stuffs about Rooting and flashing custom ROMs.
Today I tried to flash CM9 stable ROM for International Galaxy S2 I9100. I did it using temporary CWM.zip file and everything went just fine till the installation of ROM. But when I clicked Wipe Data, suddenly phone went off and now it doesn't start.
I tried everything, tried to enter into Download mode and Recovery mode but all was in vain.
Please help me what should I do now? And is my phone ever going to come back to life?
Click to expand...
Click to collapse
Sorry dude
You might have to send your phone to device center for repairs but if you are out of warranty or wants to try to Fix things yourself, then the advise/instructions below is for you:
-boot your phone with usb jig, if you can get to download mode, then proceed to next step
-Visit this thread: http://forum.xda-developers.com/showthread.php?t=1841099
Good luck
Swyped from my Samsung Galaxy SII
Is the brick bug present in ICS? I want to upgrade from Gingerbread to ICS 4.0.3, will I be safe when flashing then?
UrbanDesigns said:
Is the brick bug present in ICS? I want to upgrade from Gingerbread to ICS 4.0.3, will I be safe when flashing then?
Click to expand...
Click to collapse
Brick bug is only present on ICS 4.0.4.
ICS 4.0.3 is safe
Swyped from my Samsung Galaxy SII
Thanks
Hi guys,
Thanks for all your replies.
I already figured it out that I have bricked my phone. But I was under impression that Data wipe with CM9 ROMs is not dangerous. At the time of failure I had already installed CM9.
Guess now I'll have to send the phone to Service center.
One thing I want to ask, "If the phone is hard bricked, is there any chance of them knowing that I had installed a custom ROM?"
If they can't then it might help me since my phone is still under 1 year manufacturer warranty.
Please reply and Thank you for your replies. The latest adventure of mine turned out to be painful one!!
satish0101 said:
Hi guys,
Thanks for all your replies.
I already figured it out that I have bricked my phone. But I was under impression that Data wipe with CM9 ROMs is not dangerous. At the time of failure I had already installed CM9.
Guess now I'll have to send the phone to Service center.
One thing I want to ask, "If the phone is hard bricked, is there any chance of them knowing that I had installed a custom ROM?"
If they can't then it might help me since my phone is still under 1 year manufacturer warranty.
Please reply and Thank you for your replies. The latest adventure of mine turned out to be painful one!!
Click to expand...
Click to collapse
I don't think so. since you can't boot into either recovery or download mode.
Even if you have an increased binary counter, it will be cleared once your device is forced with a usb jig to boot into download mode.
Swyped from my Samsung Galaxy SII
Jokesy said:
I don't think so. since you can't boot into either recovery or download mode.
Even if you have an increased binary counter, it will be cleared once your device is forced with a usb jig to boot into download mode.
Swyped from my Samsung Galaxy SII
Click to expand...
Click to collapse
Then USB Jig is my last hope and if that doesn't work then I have to send the phone to the service center.
So if you can't enter into download or recovery mode there is no way to find out if i have used any custom ROM or rooted the phone?
Correct me if I'm wrong.
And thank you for your reply. In this desperation every reply from community member is like gold.
satish0101 said:
Then USB Jig is my last hope and if that doesn't work then I have to send the phone to the service center.
So if you can't enter into download or recovery mode there is no way to find out if i have used any custom ROM or rooted the phone?
Correct me if I'm wrong.
And thank you for your reply. In this desperation every reply from community member is like gold.
Click to expand...
Click to collapse
Absolutely no way. You are right
Swyped from my Samsung Galaxy SII
Jokesy said:
Absolutely no way. You are right
Swyped from my Samsung Galaxy SII
Click to expand...
Click to collapse
Thanks buddy.
I believe I have to send the phone to Samsung Service center then!!
Jokesy said:
Absolutely no way. You are right
Swyped from my Samsung Galaxy SII
Click to expand...
Click to collapse
Hello guys,
After receiving positive feedback from members I have finally submitted my phone to service center.
Please pray and hope they don't find out about my little adventure!!
Hello Guys,
Im in deep troble here have an S3 and rooted it in 10 minutes, Now being a nice guy my friend gave me his samsung s2 to root and boy oh boy i am in trouble. After trying to root phone through Odin my phone is stuck on boot screen with triangle. I used Odin 1.85 and flashed SPHD710 kernel. Then i flashed recovery kernel, im so confused there seems to a million stock kernels to use and im not sure which build this is but its older. I can not get yellow triangle off i just want the get phone back to factory settings and start over. Please please help me with this so basically what i need is
1) Get Yellow triangle off
2) Root phone correct way (what ever website i used i followed closely and now have locked friends phone
Thats all
Please help
Don't panic search xda for solutions Iam sure everything will be normal.
Sent from my GT-I9100 using xda premium
larry2679 said:
Hello Guys,
Im in deep troble here have an S3 and rooted it in 10 minutes, Now being a nice guy my friend gave me his samsung s2 to root and boy oh boy i am in trouble. After trying to root phone through Odin my phone is stuck on boot screen with triangle. I used Odin 1.85 and flashed SPHD710 kernel. Then i flashed recovery kernel, im so confused there seems to a million stock kernels to use and im not sure which build this is but its older. I can not get yellow triangle off i just want the get phone back to factory settings and start over. Please please help me with this so basically what i need is
1) Get Yellow triangle off
2) Root phone correct way (what ever website i used i followed closely and now have locked friends phone
Thats all
Please help
Click to expand...
Click to collapse
Try here
http://forum.xda-developers.com/showthread.php?t=1494114
Like when someone ask a right question in right place....
078gregory said:
Like when someone ask a right question in right place.... Why you posted here and not in Q&A forum????
Click to expand...
Click to collapse
He is new member and he is in panic :silly:
Can i flash rom with odin and how
He's also asking about what to do on an SPH-D710 in the GT-I9100 forum.
OP, do NOT flash anything from this forum. The device that this forum is for is the GT-I9100, which is a different device than the Sprint Galaxy SII. The GT-I9100 is a GSM phone that doesn't even work on Sprint's network.
You want to be in this forum: http://forum.xda-developers.com/forumdisplay.php?f=1281
Hey im new here and i panicked Sorry
Hey im in such a bind i would pay someone to help me figure this out its driving me crazy
larry2679 said:
Hey im in such a bind i would pay someone to help me figure this out its driving me crazy
Click to expand...
Click to collapse
Go to the Epic 4G Touch forum I linked you to above.
You won't find answers here in the I9100 forum.
Problem is i already flashed siyah kernel not knowing
larry2679 said:
Problem is i already flashed siyah kernel not knowing
Click to expand...
Click to collapse
That might be, but that doesn't change the fact that the device you are working with is an Epic 4G Touch (SPH-D710), and not an I9100. I9100 users will typically not be able to help you, and files in this forum will not get you out of the situation you have created by doing just that; using a file from this forum, on a device that it was not meant for.
You will find many E4GT users have done the same. They were all likewise directed to the correct forum.
Ok a friend S3 started acting up I didn't back up so I lost anything
When I tried to put back the original firmware on the phone using Odin for no reason at all will it be installed. It will just stick on Nand writing in the bottom part of the screen and nothing on tp part of the screen that would usually show FIL, PASS etc.
Next thing with some other firmwares the blue loading bar on the phone will go to basically 100% but nothing will happen on the phone
I did get on 2 firmwares, one just kept booting to the Samsung logo then go in a revolving boot sequence with the animation coming up, the other firmware I got on seems like it belonged to some other phone company and after their boot screen comes up and the Samsung's logo come on the screen it will just stay there.
In both cases the phone was left after installation on both screens for hours with no success.
All I want to do is put back on the 4.12 JB T mobile version enter unlock code and give back to my friend
Can I get some assistance please thanks
positiveg said:
Ok a friend S3 started acting up I didn't back up so I lost anything
When I tried to put back the original firmware on the phone using Odin for no reason at all will it be installed. It will just stick on Nand writing in the bottom part of the screen and nothing on tp part of the screen that would usually show FIL, PASS etc.
Next thing with some other firmwares the blue loading bar on the phone will go to basically 100% but nothing will happen on the phone
I did get on 2 firmwares, one just kept booting to the Samsung logo then go in a revolving boot sequence with the animation coming up, the other firmware I got on seems like it belonged to some other phone company and after their boot screen comes up and the Samsung's logo come on the screen it will just stay there.
In both cases the phone was left after installation on both screens for hours with no success.
All I want to do is put back on the 4.12 JB T mobile version enter unlock code and give back to my friend
Can I get some assistance please thanks
Click to expand...
Click to collapse
Take out the battery and post the model number here.
Factory reset to get past the forever spinning Samsung logo. The Odin fails are probably due to incorrect firmware.
GT-I9300
I've been trying to get a firmware for that. And how do i get it to the point of factory reset option?
thanks
G
Aerowinder said:
Take out the battery and post the model number here.
Factory reset to get past the forever spinning Samsung logo. The Odin fails are probably due to incorrect firmware.
Click to expand...
Click to collapse
positiveg said:
GT-I9300
I've been trying to get a firmware for that. And how do i get it to the point of factory reset option?
thanks
G
Click to expand...
Click to collapse
Direct all future questions here: http://forum.xda-developers.com/forumdisplay.php?f=1563
You factory reset by entering recovery and choosing that option.
Thanks got it factory reset and it started
Was some firmware not in English but was able to change language to English so it's good will root and should be on my merry way
thanks again
Sorry if I put thread in wrong area as well
G
:good:
Aerowinder said:
Direct all future questions here: http://forum.xda-developers.com/forumdisplay.php?f=1563
You factory reset by entering recovery and choosing that option.
Click to expand...
Click to collapse
Hi guess what i wa trying to put on a ROM, and for some reason it's messing up. I backed up the phone before I did it and I can't find the back up
So I'm like ok let me try and put back on the firmware, but i downloaded so many firmware looking for one to try I've been unable to find the correct one. So can you point me where I can get a firmware for my galaxy I9300 please
thanks
G
Aerowinder said:
Direct all future questions here: http://forum.xda-developers.com/forumdisplay.php?f=1563
You factory reset by entering recovery and choosing that option.
Click to expand...
Click to collapse
positiveg said:
Hi guess what i wa trying to put on a ROM, and for some reason it's messing up. I backed up the phone before I did it and I can't find the back up
So I'm like ok let me try and put back on the firmware, but i downloaded so many firmware looking for one to try I've been unable to find the correct one. So can you point me where I can get a firmware for my galaxy I9300 please
thanks
G
Click to expand...
Click to collapse
http://forum.xda-developers.com/forumdisplay.php?f=1563
Tired looking thru this place.
Aerowinder said:
http://forum.xda-developers.com/forumdisplay.php?f=1563
Click to expand...
Click to collapse
positiveg said:
Tired looking thru this place.
Click to expand...
Click to collapse
You should stick to that forum before someone doesn't read this thread and answers with a link to our firmware which will brick your device.
It should be in there somewhere. Did you read the stickies? Like aerowinder said, all tour future questions need to be posted in that forum. We know very little about your device here.
You can find all samsung firmware at samsung-updates.com
Sent from my SGH-T999V using Tapatalk 4
I didn't fing anything in that forum
no prob cool
thx
DocHoliday77 said:
You should stick to that forum before someone doesn't read this thread and answers with a link to our firmware which will brick your device.
It should be in there somewhere. Did you read the stickies? Like aerowinder said, all tour future questions need to be posted in that forum. We know very little about your device here.
You can find all samsung firmware at samsung-updates.com
Sent from my SGH-T999V using Tapatalk 4
Click to expand...
Click to collapse
positiveg said:
I didn't fing anything in that forum
no prob cool
thx
Click to expand...
Click to collapse
Well that forum is specifically for your device. Use what you find in this forum and youre destined for a brick.
If you were to ask this question there you would get answers from people who are familiar with the device you have. Ours is very different.
Sent from my SGH-T999V using Tapatalk 4
I'm sorry hey but this was moves to the correct forum
Seems as well that Odin 3.4/3.6/3.6. All seem to have a problem I installed a firmware using 1.85 and it went on find.
Ok thanks got you, have a good one. so the devices are soo similar still very different?
DocHoliday77 said:
Well that forum is specifically for your device. Use what you find in this forum and youre destined for a brick.
If you were to ask this question there you would get answers from people who are familiar with the device you have. Ours is very different.
Sent from my SGH-T999V using Tapatalk 4
Click to expand...
Click to collapse
positiveg said:
Ok thanks got you, have a good one. so the devices are soo similar still very different?
Click to expand...
Click to collapse
Hardware wise, they aren't similar at all.
positiveg said:
GT-I9300
I've been trying to get a firmware for that. And how do i get it to the point of factory reset option?
thanks
G
Click to expand...
Click to collapse
According to this you are working on an International i9300 S3 I will move your thread to the correct forum as to not confuse other users here, or have someone here give you the wrong links to software that may brick your device.
Thread moved.
The op can post what the problem is here please if its an I9300 .
I9300 Basics read first.
http://forum.xda-developers.com/showthread.php?t=2344125
Critical you read the first two posts .