I messed up some cable connectors while opening my Transformer. Now I have to replace one of the broken PCBs. Really appreciate if anyone call me sell me their broken or hard bricked Transformer. PM me or reply to this message. I live in VA and will pay for shipping and handling.
Thanks so much!!!
bonny_em said:
I messed up some cable connectors while opening my Transformer. Now I have to replace one of the broken PCBs. Really appreciate if anyone call me sell me their broken or hard bricked Transformer. PM me or reply to this message. I live in VA and will pay for shipping and handling.
Thanks so much!!!
Click to expand...
Click to collapse
Forget it, totally broken now. If anyone needs perfect screen, batteries, and ASUS cover, let me know.
charger port
bonny_em said:
Forget it, totally broken now. If anyone needs perfect screen, batteries, and ASUS cover, let me know.
Click to expand...
Click to collapse
May be you have 40-pin connector (main charge/data port)? Can you make a photo/see what a part name/number on it?
I suspect that it shoild be: uk.mouser.com/new/teconnectivity/te06mmcldocking/
Thanks,
Kostya
Working rear camera?
Related
I'm hoping someone can help me out here.. For some reason the infrared port cover on the bottom of my Hermes is missing. It's the black plastic piece thats on the left of the soft-reset button. Anyone happen to know where I can purchase a new one? Dust, etc. gets into it and it may cause problems.
Anyone know where to get one?
a broken 8525 or tytn or any other family member on ebay? This woudl benefit because you have other pieces as spares just incase.
Hey, i would even send you a few dollars for the little black round plug that covers the antenna port on the back of the phone (I'm currently using a black pencil eraser).
you could also buy a replacement OEM case from the company that has been linked on this forum a few times.
ryaske said:
a broken 8525 or tytn or any other family member on ebay? This woudl benefit because you have other pieces as spares just incase.
Hey, i would even send you a few dollars for the little black round plug that covers the antenna port on the back of the phone (I'm currently using a black pencil eraser).
you could also buy a replacement OEM case from the company that has been linked on this forum a few times.
Click to expand...
Click to collapse
Hmm very good idea. I didn't even think about that. Thank you for the advice. I will let you know if I get one
Helo pleas help, from where i can buy motherboard? my usb conector for charging and data comunication is damaged, is there any way how to fix it without changing motherboard? pleas help....thx for advises
denyzkoo said:
Helo pleas help, from where i can buy motherboard? my usb conector for charging and data comunication is damaged, is there any way how to fix it without changing motherboard? pleas help....thx for advises
Click to expand...
Click to collapse
If you are handy with very precise soldering then I would think it fixable. Trick is to find the parts... Let me know if you are interested in selling your HD as a broken phone. I happen to be in need of a motherboard myself.
Selling parts of htc touch hd.
I got all parts from my previous phone,going to make some pictures of the parts,the price for each part and the terms of payment and shipment.
All the parts are in perfect condition only middle housing is bad.
Regards.
mcnaget said:
I got all parts from my previous phone,going to make some pictures of the parts,the price for each part and the terms of payment and shipment.
All the parts are in perfect condition only middle housing is bad.
Regards.
Click to expand...
Click to collapse
Sounds interesting, looking forward to it.
hoogo said:
If you are handy with very precise soldering then I would think it fixable. Trick is to find the parts... Let me know if you are interested in selling your HD as a broken phone. I happen to be in need of a motherboard myself.
Click to expand...
Click to collapse
How much do u offer for broken HD?? (only this usb connector is damaged
Htc parts.
Motherboard complete with usb connector,cables----150eur + shipment costs.
Lcd display----50eu + shipment costs.
Digitizer----20eur + shipment.
If anybody is interesting in some part can pm and we will diskus about price and the rest of procedure.
mcnaget said:
Motherboard complete with usb connector,cables----150eur + shipment costs.
Lcd display----50eu + shipment costs.
Digitizer----20eur + shipment.
If anybody is interesting in some part can pm and we will diskus about price and the rest of procedure.
Click to expand...
Click to collapse
Thanks for the pics and prices. No go for me. I can buy a complete used HD for what your asking for the motherboard.
mcnaget said:
Motherboard complete with usb connector,cables----150eur + shipment costs.
Lcd display----50eu + shipment costs.
Digitizer----20eur + shipment.
If anybody is interesting in some part can pm and we will diskus about price and the rest of procedure.
Click to expand...
Click to collapse
Price 150 eur is quite expensive. i will try to change only usb charger on my board... but thx for offer
Sorry for my poor english.
I have to replace back hard cover (and aluminium frame) of my TF101 but I don't know where to buy it, anyone can help me?
h**p://m.zdnet.com/photos/cracking-open-the-asus-eee-pad-transformer-tf101/6272908?seq=12
Thanks in advance
The quality of construction of these parts are very poor (the joint parts break themeselve so easily) so I'm happy if there is other brand (not asus) that produce them
Try here
http://www.asusparts.eu/index.php?cPath=66920_222155_222301_222308
Thanks,
it's exactly I was looking for... but 50,44 euros for the alluminium frame are a theft!
Most TF's that are unfortunate enough to suffer some kind of trauma ends up with a broken or cracked screen. I'm surprised you can't find a replacement screen anywhere... at all.
goodintentions said:
Most TF's that are unfortunate enough to suffer some kind of trauma ends up with a broken or cracked screen. I'm surprised you can't find a replacement screen anywhere... at all.
Click to expand...
Click to collapse
You can get the LCD screen here.
pbtran said:
You can get the LCD screen here.
Click to expand...
Click to collapse
It's the glass digitizer that's the problem getting.
baseballfanz said:
It's the glass digitizer that's the problem getting.
Click to expand...
Click to collapse
and thats what i need for one of my TF, glass intact but under it is cracked
Has anyone found a cheaper alternative for the bezel? I figured it would be like 10 bucks when I tore mine off out of frustration over the sticky power button... now the back is falling off lol.
Also want to buy the bezel.
C'mon, china brothers, start to make them! You will have million orders!
on Asusparts.eu with shiping it costs 71 Eur. ... Almost $100 for cheap aluminium frame ... Will their bezel do BJ ?
As of lately, is there anyone who has found a site in the USA which sells the parts? Don't really want to order my part from Sweden... I need a Power/Volume daughter board, its about $89 shipped from sweden... really want it sooner than 5-6 weeks.
Need some help to find 40-Pin Female socket for my tablet
Dear All:
I do have a problem with the female socket in the Asus EEE TF101
in first I thought that the problem in the charging cable and I replace it but looking into the female connector in the bottom of the tablet I could see some burn inside the socket
need to but this female socket
can any one help me with where to find this part and part no if possible
Thanks
parts4repair dot com
ran across this place with screen+digitizer $40 and LCD $40
thought id post it up
sameh71 said:
Dear All:
I do have a problem with the female socket in the Asus EEE TF101
in first I thought that the problem in the charging cable and I replace it but looking into the female connector in the bottom of the tablet I could see some burn inside the socket
need to but this female socket
can any one help me with where to find this part and part no if possible
Thanks
Click to expand...
Click to collapse
search on ebay my friend.
Did you try alibaba? It's a Chinese website where you can sell and buy parts.
Sent from my HTC Vision using xda premium
I actually oredered the colume ctrl pcb from auasparts.eu ... 4-8 weeks to the USA but for $49US I have my part. Got the tablet for free so no complaints here lol
Posted using XDA Premium from my Galaxy Note 2
First of all please don't flame me or make fun of me for what i did because i know it was stupid and i shouldn't have done it.
i took apart my prime and when i was separating the tabs i stuck the card i was using to far in and cut one of the ribbons connecting the display. so i either need to know how to completely disassemble the screen assembly and a place to buy the ribbon that i cut or i need a whole ner front assembly which i have yet to find.
I really doubt you'll find a source for the cable. I would look for someone with a "bricked" or broken Prime and try to work a mutually acceptable deal.
Bob
i took the LCD off and the cable that i ripped is actually connecter the very front part so now im just looking for the full front assembly which i still can't find anywhere
unfortunately it will be very tough to find the parts, may have to send in for non warranty RMA and it will cost you. I would estimate about $250-300 judging by what others have said but only RMA can tell you. Which sucks because they won't even begin to estimate until they have the unit in their hands.
talk to one of the people on the forums with units with broken screens and make em an offer
Sent from my Transformer Prime TF201 using XDA Premium HD app
6666 said:
talk to one of the people on the forums with units with broken screens and make em an offer
Sent from my Transformer Prime TF201 using XDA Premium HD app
Click to expand...
Click to collapse
that's the part that i need, the broken screen is part of the front assembly. but think im just gonna sell it for parts, anyone know how i could wipe al the data off it without the screen, the tablet itself still works so do you think i could connect it to my computer and wipe it somehow?
cordell507 said:
that's the part that i need, the broken screen is part of the front assembly. but think im just gonna sell it for parts, anyone know how i could wipe al the data off it without the screen, the tablet itself still works so do you think i could connect it to my computer and wipe it somehow?
Click to expand...
Click to collapse
Hdmi to your tv and wipe via settings?
Sent from my SAMSUNG-SGH-I717 using XDA
I don't have an HDMI cable so that's out of the question, is their anyway to wipe from fastboot or adb
cordell507 said:
I don't have an HDMI cable so that's out of the question, is their anyway to wipe from fastboot or adb
Click to expand...
Click to collapse
Pretty sure you should be able to wipe through ADB, though someone else would have to chime in with the correct commands and parameters. I guess I've just spoiled myself working on electronics, even if I don't have a need I keep as large a variety of cables as I can
That sucks, I'm sorry it happened lol looks brutal. Like everyone's said, it's going to be hard to find parts, but are these things really proprietary? Aside from being the wrong shape/length shouldn't OP be able to find a comparable cable? Then disassemble the LCD from the GG, replace cable, profit?
I mean, it wouldn't be the first time I've seen proprietary ribbon cables, but I figured ASUS would push something somewhat standardized since this is an internal part, unlike the charging cables people aren't going to (usually, again, sorry OP lol) lose or damage the display's ribbon cable and need a new one.
Looks proprietary to me and it looks like it might control the tough screen and display.
You are not suppose the use a card on the bottom or the top, only the sides. Once the sides are the released, the bottom should just come up, and if can be safely lifted.
Anyway, it looks more like you used a knife to open it.
Best you can do, is probably sell the screen to someone who cracked their (will require some careful disassembly), and the main unit for someone who bricked theirs.
Update: Another idea to figure the part number yourself. Then call ASUS, and say you need to that exact part, that would at least cut out their 'handling' fees.
Well. Few options like others said.
1) Buy another prime and set that one aside for parts / Wait several months
until parts start emerging forsale (LCD, bezel) etc. to fix.
2) Buy someone elses broken prime to fix yours.
3) Buy protection. Smash the crap out of it while running it over with car.
Try to claim insurance. / Buy another prime from store and replace parts
with broken and take other back. (Very shaddy.. but i am sure some would
do that on here.. lol)
4) Fix it yourself. Very difficult to buy ribbon cables that would match connections.
5) Hang on wall for Memorabilia. I use to do that with a few hard drives that
broke. lol
Repair the ribbon cable yourself. I've done it once. Will take you a whole weekend to do, but it is possible. Trust me, you will not be able to find the parts to replace your lcd.
i think im just gonna sell it, the ribbon is basically unfixable, you'd say that too if you've seen it, i took apart the LCD and i actually cut much more that 1 ribbon in the LCD so it's useless, anyone have the ADB wipe commands lol
i can access it through ADB but it won't boot into fastboot when i use the command adb reboot fastboot, it just reboots normaly, i can't wipe through adb either because i don't have access to adb shell becuase of some build.prop problem i belive.
bump, can anyone help
Hmmm. Do you have the keyboard?
Honestly, you'd have to have it or the USB adapter so you could have an input other than the touchscreen, and you'd have to cave and acquire a mHDMI cable to hook up to an HDTV. You could just sell it to someone you can trust on XDA to wipe on receipt, I know I'm not interested in other peoples' data. Suppose I'll never get ahead like Google
Sent from my Transformer Prime TF201 using XDA Premium HD via my tethered HTC Vision
i guess i'll just buy the cheapest mHDMI cable i can find, that
I'd pm Gary Key and ask if he can look up the part no.
If that route goes sour, I've fixed ribbons before with conductive ink pens and crazy glue on the bottom.
On the old style ribbons I have bought the cable and the connectors and just made new ones. I don't think you can do that now a days.
You can also look at the connector (maybe with a magnifier) and find where the wire leaves the connector on each end and possibly solder a wire on the board at that point and connect it that way.
scrufy said:
I'd pm Gary Key and ask if he can look up the part no.
If that route goes sour, I've fixed ribbons before with conductive ink pens and crazy glue on the bottom.
On the old style ribbons I have bought the cable and the connectors and just made new ones. I don't think you can do that now a days.
You can also look at the connector (maybe with a magnifier) and find where the wire leaves the connector on each end and possibly solder a wire on the board at that point and connect it that way.
Click to expand...
Click to collapse
Exactly ! damn near ANY cable can be fixed !
To preserve the bandwidth of the host, I will politely ask you to clic on the image for the overview: Thank you:
Bought over ebay.be, I paid this item 5,00-*€ and 4,00-*€ for the shipping, included, a capacitive pen/stylus, also included, a screen protector, wich is hard, and seems to have a good quality build.
But, there is a defect over the top of the ABS part that is folded. This may be a manufacturer defect. I'm to lazy to ask an exchange and send it back or receive a new one... I already tried to heat it once and bend it to restore the form. It restored a little bit... I will try again later. There is also a bend over the magnetic connector. But.. Guys... For the price I paid this, the package has awesome stuff in it... I won't bother those sellers, they made a great thing and I have enought with that. I won't judge the quality, you deserve what you receive for the price. (I paid 12,00-*€ for everything and it worth it a little bit(PayPal + 3,00-*€)). But... I will surely ask another one... We'll see...
link to the seller?
Do you have a link so i can check it out please?. thanks in advance for the help!.
GANGELT said:
Do you have a link so i can check it out please?. thanks in advance for the help!.
Click to expand...
Click to collapse
Just search for
shock proof case cover for Sony Xperia Z Ultra
http://www.ebay.co.uk/itm/SHOCK-PRO...1-Z-Ultra-Z-Z2-SCREEN-PROTECTOR-/121248924363
And finally... Just got another one... still the same... But the magnetic connector wasn't damaged... Anyway, I took a heater and made it the correct way