[Q] G Sensor frozen - HTC EVO 3D

Hey I've had a problem with my g sensor. My phone wont go to landscape nor will it adjust brightness automatically even though those settings are turned on. also my soft keys arent lighting up

which rom are you on? does this happen with every rom?

Try downloading Androsensor from the Play Store. It's a free app that shows readouts from the different phone sensors.

Related

light sensor

hi all, I noticed that light sensor doesnt work properly, when I go from dark to light area, the brightness increases but when I go from light to dark area the brightness wont decrease, on honeycomb it worked properly, anybody else experiences this problem?
Same here, it goes bright but does not decrease.
I use the app https://play.google.com/store/apps/details?id=rubberbigpepper.DisplayBrightness&feature=search_result#?t=W251bGwsMSwxLDEsInJ1YmJlcmJpZ3BlcHBlci5EaXNwbGF5QnJpZ2h0bmVzcyJd
make an invisible slider on the edge of screen to adjust brightness.
is there any way to make it work properly?
Don't think so. Its pretty much unusable now.
Sent from my HUAWEI MediaPad using Tapatalk 2
There are lots of negative comments about light sensor, but i have to say it works well to me on ICS. Could be possibly massive amount of defected devices.
Lightsensor doesn't work for me either - too bad, hope it will be corrected.
Perhaps it's because I'm running ICS "General Channel".
HUAWEI MediaPad FIRMWARE(S7-301u,android4.0,C232B002,General Channel)
Do the sensor dim the light in the same session for you?
Here it turns up the light but not down again.
Sent from my U8800 using Tapatalk 2
Same here, adjusting upwards works fine, but it doesn't adjust downwards in low light conditions.
I have tried two apps that turns the light down again, custom auto brightness and lux auto brightness.
One small problem. The pad will crash on pattern unlock after sleep. I Also the light sensor will not work s after wake up sometimes.
Sent from my HUAWEI MediaPad using Tapatalk 2
mangoman said:
I have tried two apps that turns the light down again, custom auto brightness and lux auto brightness.
One small problem. The pad will crash on pattern unlock after sleep. I Also the light sensor will not work s after wake up sometimes.
Sent from my HUAWEI MediaPad using Tapatalk 2
Click to expand...
Click to collapse
I'm guessing no one has had any luck with this issue but I figure I'd necro the thread anyways. My light sensor sucks also. I used 'Android Sensor Box' to get the values coming out of the sensor. It only displays either 40 lux or 280 lux which is obviously not right. This is on Cyanogen 9, stock t-mobile ICS and the rooted international gingerbread(can't remember which one exactly).
So I was wondering if anyone who owns one of these has ever gotten a sensor value that makes any sense.
thanks
nope,
I use instead display brightness https://play.google.com/store/apps/details?id=rubberbigpepper.DisplayBrightness&hl=no
create an invisible brightness slider on theedge of the screen.
Try using custom auto brightness with the auto brightness on (there's a setting in that app that disabled the system auto brightness at screen on. Turn it off).
The original kernel only recognized 3 light levels. If you use bart's kernel it will recognize 6 levels.
Yes, I think there's a software problem because both app (lux and cua) crash hard in HMP, but I don't think fixing it is a priority.
Sent from my HTC Glacier using Tapatalk 2
How to use custom auto brightness without crashing the tablet.
There are 2 options that should be followed, other settings can be adjusted to your liking.
1. In preferences, Check Use pulsed sensor mode. Basically this option will make the app read the sensor itself instead of listening the sensor value given from the system.
2. In advanced preferences, set the sensor update speed to either half sec or 1 sec. I tried normal, but the app won't read the sensor value, so probably the slow normal maximum setting only works if you get the sensor value from the system.
You can set disable system auto brightness. I recommend it before because the setting was a "hack" which was making the system read the brightness value thus the app can get that value. Right now it's recommended that you check the disable system auto brightness.

[Q] Xperia Active questions

So I've used the search bar and google
there are 4 circles at top
1. Ambient Light sensor
2. LED notification lights
3. ???
4. Proximity Sensor
so whats in between the earpiece and proximity sensor
also why dont apps recognize the ALS? I've used android sensor box, androsensors and my android sensors but still nothing. Though auto brightness works. I know, I move my finger over it and the screen gets dim
z50j said:
So I've used the search bar and google
there are 4 circles at top
1. Ambient Light sensor
2. LED notification lights
3. ???
4. Proximity Sensor
so whats in between the earpiece and proximity sensor
also why dont apps recognize the ALS? I've used android sensor box, androsensors and my android sensors but still nothing. Though auto brightness works. I know, I move my finger over it and the screen gets dim
Click to expand...
Click to collapse
The last 2 sensors are for proximity i guess, cause even on my mini pro i have 2 circles for proximity. In the stock rom, it is never detected, its on by default. In roms like cm10, CM10.1 etc. you can choose whether to use it or not, change the different levels etc.
Well in mini pro its
Led, ambient sensor, camera, proximity.
Tbh, I think I have seen two dots instead of one for sensor. (Really hard to see)
Regards
N
mnishamk said:
Well in mini pro its
Led, ambient sensor, camera, proximity.
Tbh, I think I have seen two dots instead of one for sensor. (Really hard to see)
Regards
N
Click to expand...
Click to collapse
Yep there are two sensors for proximity.
why are there 2 sensors for proximity? using the sensor apps I've noticed that only that the right most works the 3rd one doesnt really do anything when i cover it. but it works so I'm fine with that
but how come the apps dont detect the ambient light sensor? that too is obviously working because the screen dims when i hover over it
Try using the service menu and see if it works there
Regards
N
mnishamk said:
Try using the service menu and see if it works there
Regards
N
Click to expand...
Click to collapse
I did, it doesnt

The Auto Brightness Works?

I wanna set auto screen brightness for my kindle fire hdx 8.9 (14.3.2.1, unrooted). However, I found the screen always staying at the maximum brightness if I turn auto brightness on.
Then I used app like "sensor readout" to test the light sensor, the readout changed according to surrounding light. Sensor no problem.
So I conclude the auto brightness function doesn't work on the kindle fire. As can be seen this system is really buggy: for example, even I clear all the notification, there still number in the notification bar...etc
qingtest said:
I wanna set auto screen brightness for my kindle fire hdx 8.9 (14.3.2.1, unrooted). However, I found the screen always staying at the maximum brightness if I turn auto brightness on.
Then I used app like "sensor readout" to test the light sensor, the readout changed according to surrounding light. Sensor no problem.
So I conclude the auto brightness function doesn't work on the kindle fire. As can be seen this system is really buggy: for example, even I clear all the notification, there still number in the notification bar...etc
Click to expand...
Click to collapse
Same thing happening to mean. I wonder if we call support they will downgrade us to a older version
qingtest said:
I wanna set auto screen brightness for my kindle fire hdx 8.9 (14.3.2.1, unrooted). However, I found the screen always staying at the maximum brightness if I turn auto brightness on.
Then I used app like "sensor readout" to test the light sensor, the readout changed according to surrounding light. Sensor no problem.
So I conclude the auto brightness function doesn't work on the kindle fire. As can be seen this system is really buggy: for example, even I clear all the notification, there still number in the notification bar...etc
Click to expand...
Click to collapse
Since newest ota, KY screen dims as if it is going to sleep. This happens when using the tablet. Not idle. Goes dim for five seconds and comes back on its own. I use the auto brightness on feature. Weird behavior.
joshuabg said:
Same thing happening to mean. I wonder if we call support they will downgrade us to a older version
Click to expand...
Click to collapse
I'm sorry, they don't do that, however what you can do is reset to factory default, this might fix your problem.

[Q] Auto brightness not working

Hi!
I have the S6 edge since yesterday and I noticed that auto brightness does not work.
Testing the senosr via a sensor read out tool, it actually detects brightnes levels well (as far as I can tell).
However, if I turn on my phone, it is first super dim at first. When I expose it to a flash light, the screen turns brighter and eventually maxes out. But it does not turn back to normal brightness levels once I remove the light source. Sure I can adjust auto brightness with the slider. But it is then much brighter (with same light conditions in the room) as when I truned on the phone...
Only if I turn off auto brightness, the screen reverts to the setting I have chosen...
If I turn auto brightness on again, it is as bright as with flash light exposure...
What is going on here?
Does anyone have an idea how to fix this?
Jorlin said:
Hi!
I have the S6 edge since yesterday and I noticed that auto brightness does not work.
Testing the senosr via a sensor read out tool, it actually detects brightnes levels well (as far as I can tell).
However, if I turn on my phone, it is first super dim at first. When I expose it to a flash light, the screen turns brighter and eventually maxes out. But it does not turn back to normal brightness levels once I remove the light source. Sure I can adjust auto brightness with the slider. But it is then much brighter (with same light conditions in the room) as when I truned on the phone...
Only if I turn off auto brightness, the screen reverts to the setting I have chosen...
If I turn auto brightness on again, it is as bright as with flash light exposure...
What is going on here?
Does anyone have an idea how to fix this?
Click to expand...
Click to collapse
I have the same problem. Already talked with Samsung and ATT. They want me to change the phone.
Ps. It seems the problem only persists in S6 edge not in S6. But I also found that other android that run lolipop 5.01+ have the same issue too. And right now, I use the app name velis auto brightness to fix this.
I will try to change the phone by this week and update you.
Hope this help.
I have started using an app called Lux. And it has no problem adjusting the brightness. The sensor clearly works fine as it can always displays the brightness detected by the sensor. So it has to be a software problem.
I could imagine that a hard reset could fix the issue. But right now, I do not want to go to the hassle to restore everything
Let me know how the new phone works. :highfive:
Jorlin said:
I have started using an app called Lux. And it has no problem adjusting the brightness. The sensor clearly works fine as it can always displays the brightness detected by the sensor. So it has to be a software problem.
I could imagine that a hard reset could fix the issue. But right now, I do not want to go to the hassle to restore everything
Let me know how the new phone works. :highfive:
Click to expand...
Click to collapse
The hard reset did not work, I already did it.
I will update you again once I change or test the other phones.
I went to the store, and both S6 and S6 edge in the store all have the same problem, so the exchange it may not solve the problem.
I think this problem may be a software problem or an intention from Samsung/Google.
I will try to use it in couple days. If I cannot bear this, I might return the product.
Hope they will have OTA update soon.
Got this too.
It's really anoying.
I really hope there will come an app like on older Sammy's that we can set and adjust our own brightness levels.
But I'm not expecting a fix from Samsung tho. They have proven again and again they are unable to fix their crappy software. Especialy if it's a minor bug like this.
So anyone wanna buy a rooted hardly used S6 Edge plus?

Sensors not working after replacing the battery

Hi,
after replacing the battery of my SGS6 Edge some sensors are not working.
1. Light sensor is not working when the brightness is set to automatic
2. Gyroscope sensor is not working when screen rotates
maybe other sensors are not working properly too.
I already tried to restart the phone but there is no effect.
On the hidden service menu the the light all sensors seems to work.
The light sensor is working 100% - when I cover it, it shows "0 lux"
The Gyroscope Sensor is working too, but what does the "OIS GYRO" mean? The value on X and Y does not change.
It's my business phone with a lot of data and apps. Thats the reason why I still don't try a hard reset.
Is there a solution whithout resetting the phone?
EDIT: Gyroscope seems to work... strange. But light sensor is still not working. Brightness does not change.
i've similar issue with mine, but I don't know if battery was changed before was given to me, I tried many roms nougat and marshmallow based, but the problem persist. with automatic brightness on, if I scroll the bar, it doesn't change anithing, I've to disable the automatism

Categories

Resources