Hi everyone, I have been out of the loop on this forum for a while now. Could someone please point me to the most complete ROM for Jellybean, which has all modules built in, and can be upgraded from the latest Task's ROM? Thanks!
Criskelo 4.04 ICS LRK v11.2, LRK Modem, speedmod k3-15 kernel, Carrier: AT&T (US)
incisivekeith said:
Hi everyone, I have been out of the loop on this forum for a while now. Could someone please point me to the most complete ROM for Jellybean, which has all modules built in, and can be upgraded from the latest Task's ROM? Thanks!
Criskelo 4.04 ICS LRK v11.2, LRK Modem, speedmod k3-15 kernel, Carrier: AT&T (US)
Click to expand...
Click to collapse
I'm running this http://forum.xda-developers.com/showthread.php?p=35952482
And I would recommend a full wipe to reduce problems, w
especially if you are coming from a different android version
Sent from my Nexus 7 using xda premium
Related
Hi guys
Bascially I need to have Android 2.3 on my Galaxy WiFi 5.0, I need HD video etc so im running into a problem. I have installed Eryigit-GB-2.3.6 G70ZCKPA Galaxy Player/wifi 5.0 ROM at the minute but I really would like unmodified 2.3 ROM not this one yet when I try to use odin to flash this ROM: Galaxy Player 5.0 Gingerbread KPH 2.3.6 it says every thing went ok but the device bootloops. Now Ive tried it with just the ROM and then Flashed the Kernel INTL one and it still does this?
Any help guys thanks
Please don't reply if all you have to say is "why go back to ginger bread when there are ics roms" ino i developed a couple of them i just need helpful answers thanks
Rueben
Rueben_ said:
Hi guys
Bascially I need to have Android 2.3 on my Galaxy WiFi 5.0, I need HD video etc so im running into a problem. I have installed Eryigit-GB-2.3.6 G70ZCKPA Galaxy Player/wifi 5.0 ROM at the minute but I really would like unmodified 2.3 ROM not this one yet when I try to use odin to flash this ROM: Galaxy Player 5.0 Gingerbread KPH 2.3.6 it says every thing went ok but the device bootloops. Now Ive tried it with just the ROM and then Flashed the Kernel INTL one and it still does this?
Any help guys thanks
Please don't reply if all you have to say is "why go back to ginger bread when there are ics roms" ino i developed a couple of them i just need helpful answers thanks
Rueben
Click to expand...
Click to collapse
Well the obvious first thing is that the stock kernel does not support ext4, so it will not boot without access to /data and /cache. Try going into stock recovery and wiping data. If it just gives you a bunch of errors, you need to flash and *repartition* in Odin. Then try wiping in stock again.
Sent from my YP-G70 using xda app-developers app
Thanks mate i flashed Pit file along with stock ROM and it worked cheers to you
Hi All
Does anyone know of a working Kernel out atm for 4.0.4 Samsung roms as I need a kernel to release my ROM and since Mr. Siyah got his S3 he seems to have neglected the S2 community as his kernels are getting more unstable with every release
Sad though and I would have preferred to stay with Siyah for Portal Rom but is there anything out currently that's working with the new 4.0.4 roms that's not the default stock kernel and cause the wipe brick?
Been looking for days but maybe missed something.
toxicdust said:
Hi All
Does anyone know of a working Kernel out atm for 4.0.4 Samsung roms as I need a kernel to release my ROM and since Mr. Siyah got his S3 he seems to have neglected the S2 community as his kernels are getting more unstable with every release
Sad though and I would have preferred to stay with Siyah for Portal Rom but is there anything out currently that's working with the new 4.0.4 roms that's not the default stock kernel and cause the wipe brick?
Been looking for days but maybe missed something.
Click to expand...
Click to collapse
u can try the darknight kernel thread and check for there latest one's
which bluetooth problems dou got?
Bluetooth don't work at all. It wont switch on
Sent from my ASUS Transformer Pad TF300T using xda app-developers app
Hello, Just Picked up my S2 I900m today. I am on the Bell Canada network. My previous phone is the I9000m (still love it) which was Rooted using Slim ICS and the Semaphore kernel using the KG3 Modem.
I've spent a few hours reading/research and for some reason the 9100 seems a little more complicated. I basically want a smiliar setup as I had with the i9000.
I think once I get the recovery figured out, I can start by flashing CM9 and then SLIM ICS.
Any help would be greatly appreciated.
Thanks
Edit: I forgot to mention I bought the phone used so it has been upgraded to 4.03 MUGLD3
well, the great thing with i9100 is that you can basically match anything up (considering of what OS you're in: GB or ICS) unlike that of i9000's, you have to be on that firmware so you can flash that something and etc.
if you have a good background in flashing things in i9000, then you're good to go in the i9100 world
Spacemonkie4207 said:
Hello, Just Picked up my S2 I900m today. I am on the Bell Canada network. My previous phone is the I9000m (still love it) which was Rooted using Slim ICS and the Semaphore kernel using the KG3 Modem.
I've spent a few hours reading/research and for some reason the 9100 seems a little more complicated. I basically want a smiliar setup as I had with the i9000.
I think once I get the recovery figured out, I can start by flashing CM9 and then SLIM ICS.
Any help would be greatly appreciated.
Thanks
Edit: I forgot to mention I bought the phone used so it has been upgraded to 4.03 MUGLD3
Click to expand...
Click to collapse
These links would be usefull
[Bible] Galaxy S II Bible: Complete reference (updated 01/02/12)
New here? READ THIS THREAD FIRST. What Is Recovery & Download Mode?
[03/08 UPDATE] INDEX of KERNELS [Original Android & Android Development]
[03/08 UPDATE] INDEX of ROMS [Original Android Development]
Once u have a recovery u can flash cm9 or which eva custom rom u want
I wish I could Thank you twice.
Sent from my BlackBerry Runtime for Android Apps using Tapatalk 2
Spacemonkie4207 said:
I wish I could Thank you twice.
Sent from my BlackBerry Runtime for Android Apps using Tapatalk 2
Click to expand...
Click to collapse
haha
cheers..!!!
which version of odin should I be using ? I have 1.8 and odin3 3.04
I got the same phone as you. You can flash any i9100 rom and for rooting i suggest you to flash siyah 3.5 tar with odin and get into to cwm and flash any ics rom neatrom is a good one I use the LPG neatrom lite if you wonder with the ics domination theme
Spacemonkie4207 said:
which version of odin should I be using ? I have 1.8 and odin3 3.04
Click to expand...
Click to collapse
here
http://www.mediafire.com/?8e5izu58s0go7wc
Hello guys, im a S3 GT-I9300 user, and im very happy with my device.
Today i rooted and installed cmw 6.0.2.8 touch, i want to install Siyah kernel version 1.8.9 and i have stock Android Samsung Rom Jelly Bean 4.1.2, my question is... if i install Siyah will i lose my current rom? or i need to install first Siyah and then again stock rom?
Thx for the help!
Orioncol said:
Hello guys, im a S3 GT-I9300 user, and im very happy with my device.
Today i rooted and installed cmw 6.0.2.8 touch, i want to install Siyah kernel version 1.8.9 and i have stock Android Samsung Rom Jelly Bean 4.1.2, my question is... if i install Siyah will i lose my current rom? or i need to install first Siyah and then again stock rom?
Thx for the help!
Click to expand...
Click to collapse
No. Siyah is just a kernel. You can flash that without a doubt, as long as your Rom is supported by the kernel. But you should be fine I mean, I'm running it on MIUI ICS . Normally that should have bricked it ^^
CyanogenModded Very China-like, from my Samsung Galaxy S III
LG Familyguy59/Beatsleigher
Orioncol said:
Hello guys, im a S3 GT-I9300 user, and im very happy with my device.
Today i rooted and installed cmw 6.0.2.8 touch, i want to install Siyah kernel version 1.8.9 and i have stock Android Samsung Rom Jelly Bean 4.1.2, my question is... if i install Siyah will i lose my current rom? or i need to install first Siyah and then again stock rom?
Thx for the help!
Click to expand...
Click to collapse
As mentioned, Siyah is a kernel, not a rom. You can flash any kernel and keep your rom, as long as it is supported. Siyah currently supports anything besides the new leaked 4.2.1 roms which have different drivers. Hence you will be fine. In case you face some trouble you also can simply flash back your stock kernel (you can find most kernels in Perka's Stash).
Hi guys
I have the following isue, i flashed my phone and I used this kernel
3.0.31 siyah s2-v6.0b5+ [email protected] #177
Now I cant make calls, I can't hear the person who call me and that person can't hear me, the phone radio doesn't work, sometimes the phone freeze specially when I watching videos. The phone doesn't recognize all internal memory. The return and search button doesn't work, to go back now I have to press the home button.
My question is: can I flash the kernel i have installed and install a new one. What kernel do you recommend me for this phone that works fine and what rom 4.2 is the best for this model.
I really appreciate any help.
Sent from my GT-I9100 using Tapatalk
Your signature says your phone is GT-I9100, but this is the forum for SGH-I777 AT&T version of Galaxy SII. Which phone do you have?
I have an i777 from at&t, after i flashed the kernel the phone model changed from i777 to I9100, but it is an i777 from at&t
Sent from my GT-I9100 using Tapatalk
Did you flash only the kernel, or did you also flash a rom?
What version of the operating system, and what rom are you currently running?
The kernel you flashed was built for the GT-I9100, which has a different hardware configuration from the SGH-I777. You should flash a kernel that was built for the I777, probably AJK, but answer the above questions first before I suggest which one.
First I flashed the kernel and installed the siyah one, then I installed a different rom. I had before 3.2 and then I installed 4.1.2 rom. Can you recommend me a god kernel for the I777 and a good rom if it possible 4.1.2 or 4.2 . I really appreciate your help.
Sent from my GT-I9100 using Tapatalk
I'm running jelly bean 4.1.2, base band version I9100XXLS8, build number JZ045K-I9100XWLS8, kernel 3.0.31 siyah s2- [email protected] #177
Sent from my GT-I9100 using Tapatalk
Maxx17 said:
I'm running jelly bean 4.1.2, base band version I9100XXLS8, build number JZ045K-I9100XWLS8, kernel 3.0.31 siyah s2- [email protected] #177
Click to expand...
Click to collapse
You appear to have flashed the GT-I9100 stock XWLS8 full package. Most likely you flashed the I9100 boot loaders with it. You also have an I9100 modem. I'm guessing that you flashed the I9100 siyah kernel afterwards. Your I-777 will not function with that firmware. I am surprised it even booted into system.
First, double verify that you are working with a SGH-I777 by pulling the battery and looking at the label in the battery compartment. After verifying that you have an I-777, you should flash the AT&T version of stock 4.1.2, I777UCMD8 full package which you can get from the download repository.
If you are unsure of anything, or have any questions, please ask before proceeding.
If you want to root and install a custom kernel, or install a custom rom, after getting your phone working again, we can point you in the right direction.
Thanks for your help, yes I verified and it is an i777 from at&t.
A have some questions:
1- I need to flash the kernel first and then install the new one?
2-can I install a 4.2 rom with the kernel you recommend me? I really like to have 4.2 on my phone.
3-how I get rooted after do that?
Sent from my GT-I9100 using Tapatalk
Maxx17 said:
1- I need to flash the kernel first and then install the new one?
Click to expand...
Click to collapse
No. Flash the I777UCMD8 full package from the download repository first. It contains the complete firmware, including stock kernel, stock system, an AT&T modem, and the I777 boot loaders. You can do any modifications after you return the phone to full stock 4.1.2.
3-how I get rooted after do that?
Click to expand...
Click to collapse
I am answering this question next, because it is the next step after flashing the stock firmware. To root, you should use the Framaroot application which you install on your phone. Use the Aragorn exploit. If the latest version doesn't work, download and use an earlier version, like 1.4.2.
2-can I install a 4.2 rom with the kernel you recommend me? I really like to have 4.2 on my phone.
Click to expand...
Click to collapse
Once rooted, you should use Mobile Odin lite or Mobile Odin Pro to install a custom kernel containing ClockworkMod Recovery. With this stock firmware, you would use AJK v4.9 No Swap.
After downloading the kernel, open the zip file and extract the boot.img. Use that to flash in Mobile Odin. After flashing the capacitive buttons will not work, so immediately reboot into recovery and flash the full AJK v4.9 No Swap package in CWM.
4.1.2 is the latest version of stock firmware available for the I777. If you want the Samsung Touchwiz interface, that is the latest you can get. Anything available 4.2 and above will be AOSP based. You can look in the I777 Android Development forum and the I777 Ported Development forum to see what is available. They all flash from ClockworkMod Recovery.
Ok man thanks, I'll do that, after that I'll let you know how everything goes
Sent from my GT-I9100 using Tapatalk