Hy guys.I need your help in this problem: yesterday i was trying to flash back my stock firmware on the i9100 with odin.preveiously i had ressurection remix.i've got the files from sammobile,am put the them in odin 1.82.all went well until i got stuck on Do not remove target and above said set partiton.I've tried to reflash again so i unpleged the phone,reset odin,and restarted the phone by removing and puting back the battery.
after this the phone won't turn on.i can't enter downloade mode.before getting the error on odin,the phone was in downloade mode for aprox. 30 min,and had the battery fully charged.shoul'd i try with a nother battery.i'm in Roumania and may carrier is Orange Romania,I my town i don't have acces to a usb jig if that is the solution.So please help me.
Dumix05 said:
Hy guys.I need your help in this problem: yesterday i was trying to flash back my stock firmware on the i9100 with odin.preveiously i had ressurection remix.i've got the files from sammobile,am put the them in odin 1.82.all went well until i got stuck on Do not remove target and above said set partiton.I've tried to reflash again so i unpleged the phone,reset odin,and restarted the phone by removing and puting back the battery.
after this the phone won't turn on.i can't enter downloade mode.before getting the error on odin,the phone was in downloade mode for aprox. 30 min,and had the battery fully charged.shoul'd i try with a nother battery.i'm in Roumania and may carrier is Orange Romania,I my town i don't have acces to a usb jig if that is the solution.So please help me.
Click to expand...
Click to collapse
The phone would have restarted on its own after flashing. y did u pull out battery when it was written do not disconnect target?
1st of all, you did not have proper files i suppose, always read complete history on whatever u do with ur phone.
Now u have probably corrupted the eMMC chip which means the motherboard should be replaced.
even a Jig can not help u in this case. the best solution will be, if its still in warranty, get it replaced.
answer
ctg60000 said:
The phone would have restarted on its own after flashing. y did u pull out battery when it was written do not disconnect target?
1st of all, you did not have proper files i suppose, always read complete history on whatever u do with ur phone.
Now u have probably corrupted the eMMC chip which means the motherboard should be replaced.
even a Jig can not help u in this case. the best solution will be, if its still in warranty, get it replaced.
Click to expand...
Click to collapse
Odin reached the following message: http://forum.xda-developers.com/showthread.php?t=1858836 .First i unpluged the usb cable and pluged it again,but this time windows 7 told me that the usb isn't working,so i tried a different usb but the same problem,so i decided to unplug the cable again,restart the pc,and remove the battery and put it back again and the rest of the problems begain.I used odin 1.82 with pit file 512,and the the firmware was from sammobile 2.3.6 open europe.Now i can seem how to figure this one out.Above this messages was only set partition,but it wouldn't pass it,i left the for 20-30 minutes.on the phone's screen it was just the usual message you get when you are in downloade mode.the was no other message or a blue line suggesting that the files were being written.
Dumix05 said:
Odin reached the following message: http://forum.xda-developers.com/showthread.php?t=1858836 .First i unpluged the usb cable and pluged it again,but this time windows 7 told me that the usb isn't working,so i tried a different usb but the same problem,so i decided to unplug the cable again,restart the pc,and remove the battery and put it back again and the rest of the problems begain.I used odin 1.82 with pit file 512,and the the firmware was from sammobile 2.3.6 open europe.Now i can seem how to figure this one out.Above this messages was only set partition,but it wouldn't pass it,i left the for 20-30 minutes.on the phone's screen it was just the usual message you get when you are in downloade mode.the was no other message or a blue line suggesting that the files were being written.
Click to expand...
Click to collapse
k... when u keep it on charging, does the battery symbol appear on screen?
ctg60000 said:
k... when u keep it on charging, does the battery symbol appear on screen?
Click to expand...
Click to collapse
No.The screen won't turn un.I went to a service now and they said that it can be fixed with a JTAG,because i maight have damaged the boot.They never heard of usb jig.Can you please tell me how to fix it without ther help ? because they want me to pay 30 dollars.
Dumix05 said:
No.The screen won't turn un.I went to a service now and they said that it can be fixed with a JTAG,because i maight have damaged the boot.They never heard of usb jig.Can you please tell me how to fix it without ther help ? because they want me to pay 30 dollars.
Click to expand...
Click to collapse
If you cant afford 30 dollars I would recommend you get a job or ask Mom for more pocket money.
Alternatively read the other threads here that already discuss this type of exact subject and save yourself some time waiting for answers.
Dumix05 said:
No.The screen won't turn un.I went to a service now and they said that it can be fixed with a JTAG,because i maight have damaged the boot.They never heard of usb jig.Can you please tell me how to fix it without ther help ? because they want me to pay 30 dollars.
Click to expand...
Click to collapse
if its not showing any life of power, then jtag is of no use. but since they told u it can be done in $30, then u should go for it.
$30 is worth it, u cant jtag urself, its a tough process. u can check out 'mobiletechvideos' on youtube. they hav showed jtag procedure, which requires microsoldering. & a riffbox/similar jtag device (which is again costly).
Related
hello seniors
i have galaxy s2 with litening rom 6.1 amd kernal speedmod t39. one week ago i install chainfire 3d pro but somehow it didn't work on my s2 so i decide to uninstall it. after uninsalling every thing was fine. but today when i turn off my s2 and restart it. it didn't restart. then i try to go into download mode but nothing even i m not able to enter in recovery mode. i try every thing to come back mu s2 but nothing
i try to pull off battery and reinsert it in to fone then start but fail
i try to pull off battery and then press 1minute power button to complete discharege the current and then press download mode and reinsert the battery but fail
i try to connect the cable and insert the battery but i see only this mssage on my laptop"sec s5pc210 test b/d driver is not installing success fully" and nothing happen with my s2,
so please seniors and developers what should i do to recover my s2 help me
You have no recovery and no download mode correct ???
Charge battery .
Buy USB jig and try that to get download mode .
That fails its a service centre job and be aware that the warranty on the phone has been invalidated so you may be charged for the repair .
jje
now i came to know that my galaxy s2 bootloader is corrupted. thats why i m not able to enter in download mode and recovery mode too. jig is also note working in this condition. so any soloution in this condition seniiors and developers plz?
how can i repair corrupt bootloader?
Service centre if you cannot enter download mode .
jje
today somehow i was able to enter in download mode and after that i sccessfully update my s2 in xxkh3. but after updateing in xxkh3 i think to check it switch off and on and i tried it. again it switch off but never switch on. then i pull off battery and try onather battery but it was again not on.then i put my battery in other s2 and i saw that other s2 was successfully on. after some time my s2 unit was on with my battery but when i switch off and try to start again fail. after half hour i came to my home and try to connect my s2 in computer then i see the battery charging progress bar. thus i again press start button and voila it start. but now i m afraid to switch off my s2 becouse if it counld not be start then wat will i do. this is full updated situation with me. plz help.
bruceleedragon1 said:
today somehow i was able to enter in download mode and after that i sccessfully update my s2 in xxkh3. but after updateing in xxkh3 i think to check it switch off and on and i tried it. again it switch off but never switch on. then i pull off battery and try onather battery but it was again not on.then i put my battery in other s2 and i saw that other s2 was successfully on. after some time my s2 unit was on with my battery but when i switch off and try to start again fail. after half hour i came to my home and try to connect my s2 in computer then i see the battery charging progress bar. thus i again press start button and voila it start. but now i m afraid to switch off my s2 becouse if it counld not be start then wat will i do. this is full updated situation with me. plz help.
Click to expand...
Click to collapse
id honestly take it to a service center friend...best thing to do really..sorry
some people say to me it is happening due to humidity or liquid. when i pull off my battery and rensert it into phone i observe that heat rises near camera without switch on why i dont know. anyone have idea about that.my s2 some time start but when i switch off it again refuse to start why plz help me
bruceleedragon1 said:
some people say to me it is happening due to humidity or liquid. when i pull off my battery and rensert it into phone i observe that heat rises near camera without switch on why i dont know. anyone have idea about that.my s2 some time start but when i switch off it again refuse to
Click to expand...
Click to collapse
start why plz help me
Open a map and find service centre .
Or post me your SGS2 with 500 dollar to fix .
jje
hello jje i m from india not from ur country.so how can i send u my sgs2. i have no idea about you. what is the gurantee from you that after posting my sgs2 to u with 500 dollars it would be return back to me. so plz if u could do help with this forum do it otherwise ok, plz dont mind about my words.
From what I understand if in fact your bootloader is corrupt there is a JTAG method for recovery but requires opening the handset itself. Same thing happend to me and im having to get it send in. There are a few places that do it for cheap in the states.
neon_skunk said:
From what I understand if in fact your bootloader is corrupt there is a JTAG method for recovery but requires opening the handset itself. Same thing happend to me and im having to get it send in. There are a few places that do it for cheap in the states.
Click to expand...
Click to collapse
Regarding this method of JTAG, here is a list of dealers that do repair phones via JTAG:
Samsung Boot / Jtag / UnBrick / Dead Phone / Software Repair Dealers
bruceleedragon1 said:
hello jje i m from india not from ur country.so how can i send u my sgs2. i have no idea about you. what is the gurantee from you that after posting my sgs2 to u with 500 dollars it would be return back to me. so plz if u could do help with this forum do it otherwise ok, plz dont mind about my words.
Click to expand...
Click to collapse
Hey hi i am also having the same problem as mentioned by you...pls guide me if u have restored your mobile to running state..
hello experts
i had followed steps to root my galaxy s2 using odin flashing and it was success, and unlocked.
The phone started well with a yellow Exclamation.
and the phone was unlocked.
after a few minutes the phone was very slow and got stuck. i restarted it.
again stuck, restarted but it dint start again. i thought battry was low and put to charge.
but it dint charge as well.
So i showed the phone to a repairing center and they said its dead.
Any help that i can start my phone again ??
Thanks in advance guys :'(
Try reverting back to the stock unrooted rom.
Go to Sam firmware.com and download the stock from ..flash it via Odin.. search ..google is ur friend..Don't ask the repairing shop again for advice (phone is dead...duh)
Sent from my GT-I9100 using XDA App
mmmsabeel said:
hello experts
i had followed steps to root my galaxy s2 using odin flashing and it was success, and unlocked.
The phone started well with a yellow Exclamation.
As the instructions say it will .
and the phone was unlocked.
after a few minutes the phone was very slow and got stuck. i restarted it.
again stuck, restarted but it dint start again. i thought battry was low and put to charge.
http://forum.xda-developers.com/showthread.php?t=1108499
but it dint charge as well.
Can you get to download or recovery mode is the first question .
http://forum.xda-developers.com/showthread.php?t=1134290
If you cannot get to download mode a USB recovery jig may help .
jje
Click to expand...
Click to collapse
Hello guys
hi,
i have tried everything above but still its the same, just screen is black, no indications. getting heat behind only wen put to charge.
usb jig does nothing.
best regards
sabeel
mmmsabeel said:
hi,
i have tried everything above but still its the same, just screen is black, no indications. getting heat behind only wen put to charge.
usb jig does nothing.
best regards
sabeel
Click to expand...
Click to collapse
If you have an official stock ROM with official firmware on it, the repair centre should change your mainboard and basically making your phone brand new.
mmmsabeel said:
hi,
i have tried everything above but still its the same, just screen is black, no indications. getting heat behind only wen put to charge.
usb jig does nothing.
best regards
sabeel
Click to expand...
Click to collapse
Warranty time.
mmmsabeel said:
hi,
i have tried everything above but still its the same, just screen is black, no indications. getting heat behind only wen put to charge.
usb jig does nothing.
best regards
sabeel
Click to expand...
Click to collapse
which version were you on? Are you sure the rooting went okay?
The USB-Jig must work. especially on GB. it even works fot me on ICS.
When you can not get into download-mode (odin mode) ór recovery you can't flash anything..
Hope for you that your battery is broke. or maybe one of the processors... Still got warrenty?
Vreestyle said:
The USB-Jig must work. especially on GB. i
Not true at all .
When you can not get into download-mode (odin mode) ór recovery you can't flash anything..
Not strictly true either Mobile Odin .
jje
Click to expand...
Click to collapse
Hi you cant do anything unless you have download mode on you device,
if you have JTAG box you can repair your device using this.
Its normal device getting heat near charging/USB component. This is not HW problem.
Farshard
JJEgan said:
Not strictly true either Mobile Odin .
jje
Click to expand...
Click to collapse
he just got root. and his phone won't boot....
Maybe, recovery-mode?
Vreestyle said:
he just got root. and his phone won't boot....
Maybe, recovery-mode?
Click to expand...
Click to collapse
He already said it won't boot normally, to recovery, or to download mode. JTag or warranty are his only options.
[A] Galaxy s2 bricked
You have to know smthng:
- It is always possible to get to download mode, if not through the button combo (home+power+Volume_DOWN), then through the USB Jig
- If your phone is bricked, the download mode might not announce itself through the android robot: the exclamation mark will persist in some cases. One indication is that ODIN will be recognizing your phone on the COM port (USB that is).
Notify me if you needed further assistance
Which instructions did you follow?
If those are wrong hopefully somebody else will see this and avoid those instructions.
Hey guys.
I made a stupid error last night when I tried going from ICS CM9 back to ICS STOCK LPQ.
I forgot to wipe data and just wiped cache and dalvik cache.
The connection broke whilst flashing through ODIN and now I have a blank black screen and the phone won't turn on...((( (It does technically as when I try pressing the on button later on the phone would get hot - meaning its on but BLACK SCREEN)
I have tried taking the battery out for hours and putting it back in...nothing is working.
I don't know what to do...I'm in uni where I have fast wifi. Please help. Any advice would be grateful
EDIT:
Ok.
So usb jig arrived this morning. Ripped it open. Popped my sgsII from charger (fully charged I think!) took battery out - 15 secs
placed battery back in.
Inserted USBJIG. . .
. . .
. . . . BLACK SCREEN OF DEATH
Nothing....Still the same. No screen activity...sad...
only way is either JTAG or Samsung service center right?
I used to have yellow exclamation mark + 4 counts....but they can't see anything so they won't know right?
or did the usbJig work but just the fact that I can't see anything on the screen??
...sad I hated seeing noobs flashing phones improperly and crying when it got softbricked....well even though mine is a straight hardbrick i still feel sad....noob
update.
I've taken it to SSCentre on tuesday. I called them yesterday and they said they couldn't fix it over there and had it shipped somewhere else...is that bad?
it could take upto 2 weeks!!!!!!
I rememeber the engineers working on my friends Galaxy S last year and they didn't have to send it to somewhere else. (he had the soft brick 3 yellow logo icons) and didn't have the version where the download/recovery mode didn't work) The engineer just flashed it with latest stock sgs firmware (ignoring that csc was orange lol)
Maybe my flash was so impeccable I fried the motherboard? I'm one kick ass bricker....
dk206 said:
Hey guys.
I made a stupid error last night when I tried going from ICS CM9 back to Gingerbread Stock JVU.
I forgot to wipe data and just wiped cache and dalvik cache.
The connection broke whilst flashing through ODIN and now I have a blank black screen and the phone won't turn on...((( (It does technically as when I try pressing the on button later on the phone would get hot - meaning its on but BLACK SCREEN)
I have tried taking the battery out for hours and putting it back in...nothing is working.
I don't know what to do...I'm in uni where I have fast wifi. Please help. Any advice would be grateful
dk206
Click to expand...
Click to collapse
I'm assuming download mode and recovery also don't work when the device is powered off?
dk206 said:
Hey guys.
I made a stupid error last night when I tried going from ICS CM9 back to Gingerbread Stock JVU.
I forgot to wipe data and just wiped cache and dalvik cache.
The connection broke whilst flashing through ODIN and now I have a blank black screen and the phone won't turn on...((( (It does technically as when I try pressing the on button later on the phone would get hot - meaning its on but BLACK SCREEN)
I have tried taking the battery out for hours and putting it back in...nothing is working.
I don't know what to do...I'm in uni where I have fast wifi. Please help. Any advice would be grateful
dk206
Click to expand...
Click to collapse
Hmm have you tried getting into download mode to see if the device shows up in odin?
dk206 said:
Hey guys.
I made a stupid error last night when I tried going from ICS CM9 back to Gingerbread Stock JVU.
I forgot to wipe data and just wiped cache and dalvik cache.
The connection broke whilst flashing through ODIN and now I have a blank black screen and the phone won't turn on...((( (It does technically as when I try pressing the on button later on the phone would get hot - meaning its on but BLACK SCREEN)
I have tried taking the battery out for hours and putting it back in...nothing is working.
I don't know what to do...I'm in uni where I have fast wifi. Please help. Any advice would be grateful
dk206
Click to expand...
Click to collapse
If you can get into download mode then there is still hope. If you can't then your only option is either warranty repair of Jtag service. If download mode then works then just reflash using Odin.
You flash i9000XXJVU to your i9100 phone? So you need JTAG or do service. Your bootloader is totally dead
hiepgia said:
You flash i9000XXJVU to your i9100 phone? So you need JTAG or do service. Your bootloader is totally dead
Click to expand...
Click to collapse
Didn't even notice that XXJVU was an i9000 firmware.
To OP: Yup nothing to do, but send it in for repairs.
yeah sorry not JVU LPQ (I was getting mixed up with firmwares)
Yeah phone not going into download or recovery mode.
I think when I press the power button the phone does turn on but I get nothing but black screen....(the phone warms up)
So shall I order a JTAG to flash? or take it to repair centre?
Will they know I've been flashing this thing to death? Counter is on 4 at the moment..... so worried!
dk206 said:
yeah sorry not JVU LPQ (I was getting mixed up with firmwares)
Yeah phone not going into download or recovery mode.
I think when I press the power button the phone does turn on but I get nothing but black screen....(the phone warms up)
So shall I order a JTAG to flash? or take it to repair centre?
Will they know I've been flashing this thing to death? Counter is on 4 at the moment..... so worried!
Click to expand...
Click to collapse
Are u sure?
vol down+power+home button is download mode
Check it once again if it doesn't work...
maybe u can try some usb-jigg ?!
so you can come in to download-mode and then flash with odin =(
dk206 said:
ye
So shall I order a JTAG to flash?
JTag is not Samsung warranty its a paid for service .
or take it to repair centre?
Will they know I've been flashing this thing to death? Counter is on 4 at the moment....
.
Warranty is void with custom rom root or rom counter above zero .
Will they know yes counter is on 4 .
Will they ignore it and put it through as warranty they may but dont count on it .
USB jig would be the starting point .
That fails you could go to warranty repair if thats rejected then pay for JTag repair .
jjue
Click to expand...
Click to collapse
Any place or website where I could buy a USB JIG?
Not really keen with solders....
Thanks guys
dk206 said:
Any place or website where I could buy a USB JIG?
Not really keen with solders....
Thanks guys
Click to expand...
Click to collapse
eBay. Or Google.
first charge it. Then try to enter download mode again. I have exp. 1 time battery low and phone just warm up and black screen. After Charge, it's ok till now!
dk206 said:
Any place or website where I could buy a USB JIG?
Not really keen with solders....
Thanks guys
Click to expand...
Click to collapse
Read the post USB jigs to loan out
http://forum.xda-developers.com/showthread.php?t=1495867
jje
if you have adb maybe you could try:
1. Connecting your device to PC while turned off,
2. CMD > adb devices
* If you see your device connected, proceed with:
adb reboot recovery or adb reboot bootloader
* If you don't see any device connected, try googling for qhsusb_dload driver for your device, and after you install them (and maybe a couple of PC restarts) repeat step 2
3. if you manage to get to recovery, i hope you have your nandroid backup so you could restore them.
my HTC sensation 4G had this situation few days ago, couldn't go to recovery/bootloader, blanked out when turned on and had fever
i fixed it using those steps, i wish i could remember where i got the qhsusb driver thingy from.. i'll let you know when i remember.
edit: it might work on S2, or might not.. i don't know this will help or not, but you could read adb/fastboot/bootloader/android 101, maybe you could get something from there
hiepgia said:
You flash i9000XXJVU to your i9100 phone? So you need JTAG or do service. Your bootloader is totally dead
Click to expand...
Click to collapse
The bootloader death thing is not 100% true. When I first got my phone, (when there wasn't any rom for it) I tried flashing a I9000 rom. I was so stupid and luckily it didn't break my phone. After the flashing it turned on and stayed on bootlogo.
It was a miracle for me!
Ok.
So usb jig arrived this morning. Ripped it open. Popped my sgsII from charger (fully charged I think!) took battery out - 15 secs
placed battery back in.
Inserted USBJIG. . .
. . .
. . . . BLACK SCREEN OF DEATH
Nothing....Still the same. No screen activity...sad...
only way is either JTAG or Samsung service center right?
I used to have yellow exclamation mark + 4 counts....but they can't see anything so they won't know right?
or did the usbJig work but just the fact that I can't see anything on the screen??
...sad I hated seeing noobs flashing phones improperly and crying when it got softbricked....well even though mine is a straight hardbrick i still feel sad....noob
You just got to hope for the guy that repairs it not to see or not to care about custom roms etc .
jje
JJEgan said:
You just got to hope for the guy that repairs it not to see or not to care about custom roms etc .
jje
Click to expand...
Click to collapse
Ok update.
I've taken it to SSCentre on tuesday. I called them yesterday and they said they couldn't fix it over there and had it shipped somewhere else...is that bad?
it could take upto 2 weeks!!!!!!
I rememeber the engineers working on my friends Galaxy S last year and they didn't have to send it to somewhere else. (he had the soft brick 3 yellow logo icons) and didn't have the version where the download/recovery mode didn't work) The engineer just flashed it with latest stock sgs firmware (ignoring that csc was orange lol)
Maybe my flash was so impeccable I fried the motherboard? I'm one kick ass bricker....
you should have tried download mode blindly first. as i have flashed once blindly and it fixed my all dead screen.
I need some help, a few days ago y flashed SlimSaber on my phone, everything was ok until this morning, when i woke up the phone was off, when i truned on it got stuck on the samsung logo screen, then i tried to start it in Download mode, connected to the pc opened ODIN and tried to flash a stock rom, for some reason the phone got disconected in the middle of that, after that i tried again and this time it finished but said FAIL then i unplugged the phone tried to restart it but nothing happened now i can´t even get to download mode the phone is just there i can't turn it on and i don't know what to do, i need help plz
If the phone won't boot at all, what exactly do you expect anyone here to suggest ? No Christmas miracle.
Service centre for motherboard replacement (expensive option) or source 2nd hand board from 'donor' phone (search online) & either replace yourself or pay a local mobile repair shop to do it (cheaper option).
volkstilo said:
I need some help, a few days ago y flashed SlimSaber on my phone, everything was ok until this morning, when i woke up the phone was off, when i truned on it got stuck on the samsung logo screen, then i tried to start it in Download mode, connected to the pc opened ODIN and tried to flash a stock rom, for some reason the phone got disconected in the middle of that, after that i tried again and this time it finished but said FAIL then i unplugged the phone tried to restart it but nothing happened now i can´t even get to download mode the phone is just there i can't turn it on and i don't know what to do, i need help plz
Click to expand...
Click to collapse
Try to use JIG, but you don't assure you nothing. The assistance will find out for sure that you have installed a cooked ROM and you will pay a lot for a simple replacement. And then I advise you to follow the many guides available online to disassemble and reassemble the pieces of the Galaxy S2. Let me know
thanks for the help but at this point I think i'll buy another celphone I'm thinking on the galaxy grand or the galaxy win
volkstilo said:
thanks for the help but at this point I think i'll buy another celphone I'm thinking on the galaxy grand or the galaxy win
Click to expand...
Click to collapse
Don't worry, i understand you. However consider the purchase of Moto G!
thanks for the tip marco i'll definetly go for the moto G
Hi guys,
I was flashing my S10 by Odin, using USB-C connector which is also charging the laptop.. (why didnt use the second one I idiot??)
Odin sudently stoped flashing, stuck maybe on 90% and I was waiting more then hour, but flashing did not succesful, if laptop discharged the battery and switched off.
Samsung is totaly dead, I tried everything like get to recovery mode, Odin mode, leave the battery fully discharged, unplug and replug battery... No any sign of life. PC doesn't see it..
It seems there is nothing I can do for unbrick it, but maybe YOU know some trick that may rescue my phone...?
Is it possible that some box as Octoplus or some like that will be working for my problem?
Many thanks for any idea, Regards, Tomas.
I would recommend trying to return to manufacturing (RMA) the phone just explain that it's hardware bricked doesn't turn on etc and you should get a new phone. How ever if they find out that you tried to flash custom software on your phone your warranty is voided and you might have to buy a new phone.
download official firmware and flash every file except for HOME CSC using Odin. This should revert you back to stock rom and allow you to boot properly.
It's not normal that flashing takes so long in first place.
Something already went wrong while it was still flashing.
My S10 flashes in like 10 minutes completely.
That's strange anyway because mine stopped one or two times flashing
causing a soft brick but I always could enter Download Mode again and reflash.
I'd basically never flash with a notebook not connected to a charger
but in your case I think you could wait even more hours and nothing would happen anymore.
One exception could be that you flashed the wrong firmware.
I wouldn't send it to Samsung if that's the case (in my opinion).
Just don't do such stuff if you don't know what you are doing and learn from it.
A honest option is to aquire a device with broken display and ideally broken back glass and change the motherboard.
It's not that difficult and you could exchange the battery e.g.. (plus it's fun)
Thanks for all answers.
Unfortunately, the rom I flashet was stock and 100% right for my phone. Downloaded from sammobile.
Also now I'm not able to flash anything because PC does not see my phone when connected...not any sound and Odin wont show that device is connected.
One more information-I'm not some fish to do something what I dont know about..my job is technician in mobile phone repair servis and shop. But 99% repairs I'm doing is hardware repair- like broken LCD change, battery change, charging connector repair by soldering... Sometimes software repair of course, I flashed by Odin many many times, but flashing takes max 10 minutes.. this is why used charging port co connect the phone. There was some another problem I'm sure.
Anyway thanks for your answers.
I'll send the bricked phone on eBay, maybe somebody have the right tool to make it done.
Thx again.