Hello, after restore my efs backup with ktool app the phone is in bootloop. The first logo appears("samsung galaxy s3") and the phone reboot again...i´ve access to download mode and
cwm. i´ve tried to wipe everything, and flash a stock rom via odin, but no luck. i´ve tried instead of wipe, format data, cache and system then flash stock rom via odin, but no luck again..
I did a backup of my efs partition before restore my old efs backup...
what can i do? thanks, sorry for my bad english
What does Odin say when you try to flash the stock rom?
Format each and everything apart from sdcard in cwm and try.
Odin shouldn't fail unless you're doing something wrong..
masterex567 said:
What does Odin say when you try to flash the stock rom?
Format each and everything apart from sdcard in cwm and try.
Odin shouldn't fail unless you're doing something wrong..
Click to expand...
Click to collapse
no, odin flash it successfully, but bootloop persists.. i ´ve done all the "formats" you suggested, and then flashed stock rom via odin, but same problem...
thanks
<ID:0/009> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9300XXDLJ4_I9300TPHDLJ1_I9300XXDLID_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/009> Odin v.3 engine (ID:9)..
<ID:0/009> File analysis..
<ID:0/009> SetupConnection..
<ID:0/009> Initialzation..
<ID:0/009> Get PIT for mapping..
<ID:0/009> Firmware update start..
<ID:0/009> system.img
<ID:0/009> NAND Write Start!!
<ID:0/009> boot.img
<ID:0/009> cache.img
<ID:0/009> hidden.img
<ID:0/009> recovery.img
<ID:0/009> modem.bin
<ID:0/009> RQT_CLOSE !!
<ID:0/009> RES OK !!
<ID:0/009> Removed!!
Hm.
try getting warranty from samsung.
They might take a look.
from the looks of this, it seems more complicated.
because if odin flashed everything succesfullly. There can't be any problem.
Try getting another odin package and see...
masterex567 said:
Hm.
try getting warranty from samsung.
They might take a look.
from the looks of this, it seems more complicated.
because if odin flashed everything succesfullly. There can't be any problem.
Try getting another odin package and see...
Click to expand...
Click to collapse
no need xD i flashed an ICS stock rom and phone is alive again xD ufff.....
thanks
antunes20 said:
no need xD i flashed an ICS stock rom and phone is alive again xD ufff.....
thanks
Click to expand...
Click to collapse
Haha.
A problem like that would have scared the hell out of me too.
Take a nandroid backup as well now.
And, you can go on and flash LL5. :high-five:
antunes20 said:
Hello, after restore my efs backup with ktool app the phone is in bootloop. The first logo appears("samsung galaxy s3") and the phone reboot again...i´ve access to download mode and
cwm. i´ve tried to wipe everything, and flash a stock rom via odin, but no luck. i´ve tried instead of wipe, format data, cache and system then flash stock rom via odin, but no luck again..
I did a backup of my efs partition before restore my old efs backup...
what can i do? thanks, sorry for my bad english
Click to expand...
Click to collapse
Hi I think I have the same problem here
can you give me the link to the ICS rom that you use to fix your problem
wydarwin said:
Hi I think I have the same problem here
can you give me the link to the ICS rom that you use to fix your problem
Click to expand...
Click to collapse
Check here and pick your region / country
http://forum.xda-developers.com/showthread.php?t=1646610
antunes20 said:
Hello, after restore my efs backup with ktool app the phone is in bootloop. The first logo appears("samsung galaxy s3") and the phone reboot again...i´ve access to download mode and
cwm. i´ve tried to wipe everything, and flash a stock rom via odin, but no luck. i´ve tried instead of wipe, format data, cache and system then flash stock rom via odin, but no luck again..
I did a backup of my efs partition before restore my old efs backup...
what can i do? thanks, sorry for my bad english
Click to expand...
Click to collapse
factory reset usually helps when bootloop occur.
Sent from my Supercharged V12 Samsung Galaxy S3 using Tapatalk
Related
hello guys im fernando im new to the forum, i would like to get some help with my little problem with my s3... im very sorry about my english spelling...
the problem is that i flashed a custom rom into my phone.. it worked great for the last 5 months or so.... in the past month i installed cyanogenmod 10.1... it was great.. but i have a little situation and i have to sell my s3 (no worries, im getting a new one hehe) but the buyer wants to get the phone with stock samung official rom... i downloaded the lastest official rom but i dont know how to install it and leave the phone like out of the box like new.... can someone help me with the steps on how to get to sotck premium suite samsung official rom from cyanogenmod 10.1??? thank you in advance guys
Hi Fernando.
You should read the basics, how to flash stock ROMs via Odin, there's loads of useful information on here if you look for it. And don't forget to do a factory reset
Glebun said:
Hi Fernando.
You should read the basics, how to flash stock ROMs via Odin, there's loads of useful information on here if you look for it. And don't forget to do a factory reset
Click to expand...
Click to collapse
thanks a lot glebun for your asnwer, but the question is.. i can flash the stock rom with odin normally?.. doesnt matter if i had a previous custom rom and cm10.1?'
No, it doesn't matter, as long as you do a factory reset from recovery right afterwards. Also, they may want to have the flash counter at zero, it can be easily reset, all the info is there for you to read
Glebun said:
No, it doesn't matter, as long as you do a factory reset from recovery right afterwards. Also, they may want to have the flash counter at zero, it can be easily reset, all the info is there for you to read
Click to expand...
Click to collapse
sorry bro me again.. i tried to flash my phone with odin used the .md5 of stock rom plugged the phone everything nice... after a min or so it says fail!... heres the log:
<ID:0/007> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9300XXELLC_I9300PHEELL3_I9300XXELLA_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> system.img
<ID:0/007> Complete(Write) operation failed.
<ID:0/007> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
make sure Kies is not running
it worked but....
ty for your ansers and patience... i load the stock rom with odin all went fine but now went it turned on just stays in th samsung logo and keeps repeating the boot samsun image over and over... now i realy dont know what to do help please
flashing rom 101: just flash it like every other rom. put the stock rom on your phone. reboot to cwm recovery. do wipe cache/ wipe davilk cache/ wipe user data-factory reset then flash zip from sd card. look for the rom .zip and flash it.
edit: take the battery out of the phone. put it back in. shoot i just read its stuck on boot loop. yea i dont know. im a noob at that part. well search around the forums or use google.
also maybe look here: http://forum.xda-developers.com/showthread.php?t=2111641
Go into recovery, wipe data and cache.
ty guys but the problem is that when i flashed the custom it doesnt come with CMW so i cant get into recovery to flash a custom or something
just do a factory reset from recovery
Hey guys,
I recently flashed null_24 custom rom and after rebooting the phone it got stuck at the Samsung Galaxy s3 logo.
When trying to enter CWM (Touch recovery) i get a black screen and it seems to freeze.
I was able to enter download mode and tried to flash stock rom via Odin.
I tried rebooting my PC and using different USB ports but it failed every time...
Then i tried to recover my phone via kies but it got stuck at 0%
Is there anything i can do or is my phone broken for good?
I could use any help!
Thanks in advance
You need to give more detail.
Do you have an internation or usa s3?
What error did you get with odin?
If you flashed a rom image for a different phone then your phone is probably bricked. Likewise if you get pit errors in odin. If thats the case then it needs a repair job.
Sent from my GT-I9300 using xda premium
I have an international s3
I flashed null_ roms before, and hat no problems with them. But null_24 didn't let me boot and froze my cwm.
Here's my Odin log:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> KIES_HOME_I9300XXDLJ4_I9300OXADLJ4_368423_REV00_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> boot.img
<ID:0/004> NAND Write Start!!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<ID:0/004> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
The log doesnt look good. I would not mess with it until somebody more knowledgable can help.
If you try things like pit files you may make it beyond repair by yourself and need to send it somewhere for repair.
Sorry I cant really help you further and I hope you get it sorted.
Sent from my GT-I9300 using xda premium
Boot into recovery and wipe data (if on stock recovery your internal SD will be wiped) then try flashing another Odin image.
Sent from my Nexus 7 using Tapatalk HD
Theshawty said:
Boot into recovery and wipe data (if on stock recovery your internal SD will be wiped) then try flashing another Odin image.
Sent from my Nexus 7 using Tapatalk HD
Click to expand...
Click to collapse
I can't boot into recovery anymore, when i try it my phone says: "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again." which didn't work...
Is there anything else I can do?
JonOssim said:
Is there anything else I can do?
Click to expand...
Click to collapse
No looks like you broke it and need a service centre .
jje
JonOssim said:
I can't boot into recovery anymore, when i try it my phone says: "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again." which didn't work...
Click to expand...
Click to collapse
Nope. Service Center it is.
Sent from my GT-I9300 using xda app-developers app
Is there any way I can reset the flash counter via download mode?
And is there any way to retrieve my data on my internal sd?
So I guess it's a no?
JonOssim said:
So I guess it's a no?
Click to expand...
Click to collapse
You could try install a kernel only in odin. One with a recovery. Speedmod maybe? This may give you your recovery back and odin might let it Flash.
Worth a try
Drew071
Sent from my GT-I9300 using xda app-developers app
Okay thanks!
I'll try it when i get home
I've had the same issue a couple of times, all I did was keep trying to flash the stock firmware, and eventually it worked.
I have a better experience with some older firmwares than the newest ones.
Otherwise I'd try as other mentioned, flash a recovery and wipe data and all that, and then flash firmware.
Hope it sorts out for you!
This is so frustrating!
I tried flashing the kernel hundred times but i get the same errorlog as before...
I'll try to flash older firmwares like you said ratatattata
ratatattata said:
I've had the same issue a couple of times, all I did was keep trying to flash the stock firmware, and eventually it worked.
I have a better experience with some older firmwares than the newest ones.
Otherwise I'd try as other mentioned, flash a recovery and wipe data and all that, and then flash firmware.
Hope it sorts out for you!
Click to expand...
Click to collapse
hey, did you have the same odin error log as me??
JonOssim said:
hey, did you have the same odin error log as me??
Click to expand...
Click to collapse
Yes, I believe it was just that log.
Hello, i flashed my s3 to Omega rom then after trying to restore my EFS using Hc-ktool, now my phone is stuck at boot logo and failed to load, i tried to restore my phone to stock firmware using ODIN but still the same. still stuck at samsung galaxy logo. any ideas?
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9300XXEMA2_I9300XEFELL1_I9300XXELKB_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> tz.img
<ID:0/003> NAND Write Start!!
<ID:0/003> sboot.bin
<ID:0/003> system.img
<ID:0/003> boot.img
<ID:0/003> recovery.img
<ID:0/003> cache.img
<ID:0/003> hidden.img
<ID:0/003> modem.bin
<ID:0/003> RQT_CLOSE !!
<ID:0/003> RES OK !!
<ID:0/003> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
Boot into recovery and factory reset.
boomboomer said:
Boot into recovery and factory reset.
Click to expand...
Click to collapse
i tried it still no luck :crying:
try flashing a custom recovery(CWM touch or PHILZ) and then making a full wipe from recovery.
sriram231092 said:
try flashing a custom recovery(CWM touch or PHILZ) and then making a full wipe from recovery.
Click to expand...
Click to collapse
i made a full wipe/factory reset, dalvik cache, wipe cache partition still not working. could this be a hardware issue?
d_tan10 said:
i made a full wipe/factory reset, dalvik cache, wipe cache partition still not working. could this be a hardware issue?
Click to expand...
Click to collapse
Download the firmware agin .
Flash stock rom to test hardware after a full wipe
JJEgan said:
Download the firmware agin .
Flash stock rom to test hardware after a full wipe
Click to expand...
Click to collapse
i downloaded a new stock firmware again from sammobile.com now im having boot loops. putting it back to stock firmware should fix the problem but mine doesnt.
d_tan10 said:
i downloaded a new stock firmware again from sammobile.com now im having boot loops. putting it back to stock firmware should fix the problem but mine doesnt.
Click to expand...
Click to collapse
which f/w did you flash? did you factory reset immediately after flashing the f/w?
sriram231092 said:
which f/w did you flash? did you factory reset immediately after flashing the f/w?
Click to expand...
Click to collapse
I9300XXEMG4_I9300XEFEMG2_I9300XXEMG4_HOME.tar.md5
Yes i did a factory reset/data wipe using stock recovery
d_tan10 said:
I9300XXEMG4_I9300XEFEMG2_I9300XXEMG4_HOME.tar.md5
Yes i did a factory reset/data wipe using stock recovery
Click to expand...
Click to collapse
now that is odd! restoring EFS should have bricked the phone! but that's not a hard brick. as you have flashed XXEMG4, now you have a chance of flashing a f/w newer than that(like XXEMG5 or XXMEG6)! try flashing either of these. if the problem still persists, send it to service center.
:good:
have you tried removing the battery for a few minutes ?
sriram231092 said:
now that is odd! restoring EFS should have bricked the phone! but that's not a hard brick. as you have flashed XXEMG4, now you have a chance of flashing a f/w newer than that(like XXEMG5 or XXMEG6)! try flashing either of these. if the problem still persists, send it to service center.
:good:
Click to expand...
Click to collapse
Yes i can flash stock firmware using Odin also able to install Custom rom using CWM. the problem is just the booting up, im downloading I9300XXEMG6_I9300PHNEMG2_PHN.zip now. Do you think the service center will repair my phone even if they see i have flash counts?
ashraf sharif said:
have you tried removing the battery for a few minutes ?
Click to expand...
Click to collapse
Yes, i took the battery,SIM,memory card out and put it back
have you tried kies? if not do this, BEFORE CONNECTING PHONE TO PC start kies go to upgrade and initialisation. enter your phone model number and serial number. put phone in download mode, vol down +home+power NOW CONNECT PHONE TO PC. this should force kies to upgrade your firmware
d_tan10 said:
Yes i can flash stock firmware using Odin also able to install Custom rom using CWM. the problem is just the booting up, im downloading I9300XXEMG6_I9300PHNEMG2_PHN.zip now. Do you think the service center will repair my phone even if they see i have flash counts?
Click to expand...
Click to collapse
they will repair what ever may happen to your phone but will charge you. did you try flashing CM10.2 roms or aosp custom roms?
since odin is not solving your issue than perhaps kies may fix it. i would try kies before service center as it probably will work .even if it does not solve the looping it would leave your phone with official status and may even allow you to get your phone fixed under warranty. after all kies and ota updates are the only official ways to upgrade your firmware under warranty.
Ok thanks, ill keep you guys posted on the status of my phone
XXEMG6 didnt work for me still stuck on the boot loop and also samsung kies, is there any other way i can fix my phone before going to the service center?
maybe flash an emergency firmwareRescue http://forum.xda-developers.com/showthread.php?t=1825272 these firmwares have pit partitions if you flash pit better make sure its the right one
d_tan10 said:
XXEMG6 didnt work for me still stuck on the boot loop and also samsung kies, is there any other way i can fix my phone before going to the service center?
Click to expand...
Click to collapse
send it to SC before something very bad happens to your phone. you should've been careful while flashing. hope you get your phone in a good working condition.
:good:
Hey Guys,
I'm sure all of you get lots of these questions, however I have been trying for a couple of days to get this S3 going so I can just asking for help.
My main issue is I cannot flash any ROM's via Odin.
Here is some background infomation:
I started with a stock Galaxy S3 GT-i9300 International 16GB model.
Flashed the correct version of Cyanogen Mod for my Model/Sub Model.
I install this rom by flashing CWM (Clock Work Recovery Mod) and installing the update.zip from my external SD card.
I have done this before with other Samsung devices, No big deal, just factory rest and wipe the davik cache and flash the new ROM.
Well I decided to backup the original ROM via CWM's backup option. The backup completed fine but I backed it up to the phones internal storage instead of my External SD card. The new ROM worked fine till it ran out of space. So I selected the Delete option back in CWM to remove the backup file, rebooted the phone only to find I was still using 8 or so GB of storage.
So my phone was not happy. No room to download updates or save new pictures, etc.
This week I decided to flash the stock ROM back over the phone. For some reason the firmware was incorrect for that model or something was wrong with the phone.
After looking around I decided to flash a .pit file for the Galaxy S3, One problem, I did not know that different storage sizes of S3's have different .PIT files. However it flash and I still could not restore my phones ROM.
So after a few days of looking around I downloaded the stock ROM from Sam-Mobile.com for my phone and country and download GT-I9300_mx_20120220 PIT for for what I read and understood was for a 16GB GT-I9300.
So the new PIT file flashes fine, however I still cannot flash any new ROMS. I have tired the stock rom from Sam-Mobile or trying to flash Recovery-cwmtouch-6.0.3.2-GTI9300.tar (clock work recovery mod).
None of these flash. Odin3.04 just sits on "NAND Write Start!!" and there is a blue "downloading" bar that is across the screen and that's it.
Nothing else happens. I have also attached a screen shot of this.
I have a water damaged 16GB GT-i9300T that I have used to create a .PIT file from Heimdall, But that sits there for about 10 Min before Odin says "Unable to get pit map"
I have also tried this: http://forum.xda-developers.com/showthread.php?t=1916796
I get all the way to shorting out the resistor (R313) on the PCB but the phone does not turn on and fails to display "SD Card Mode"
So, can anyone help me?
I know it might be a long shot but at this point I'm willing to try anything. Any ideas would be much appreciated.
Cheers
Mitchell
Flashing just a pit file usually results in a hard brick.
You can try a rescue firmware:
http://forum.xda-developers.com/showpost.php?p=30087735&postcount=6&nocache=1&z=2665989794768393
But you probably need a new motherboard.
Thanks for that!, The recovery firmware failed to flash but the pit file flashed allowing me to install Cyanogen Mod.
Thanks for your help on this one :good:
boomboomer said:
Flashing just a pit file usually results in a hard brick.
You can try a rescue firmware:
http://forum.xda-developers.com/showpost.php?p=30087735&postcount=6&nocache=1&z=2665989794768393
But you probably need a new motherboard.
Click to expand...
Click to collapse
I. Need help to...my s3 its stuck at samsung logo. I dont have recovery. Just download Mode..i try to flash pit and no flash. Roms nand write fail. Some pits just say get pit mapping but nothing happens. Kies dont flash just 0%...how can i unbrick the iPhone please need help
Did u fix !!!
leo_hacker82 said:
I. Need help to...my s3 its stuck at samsung logo. I dont have recovery. Just download Mode..i try to flash pit and no flash. Roms nand write fail. Some pits just say get pit mapping but nothing happens. Kies dont flash just 0%...how can i unbrick the iPhone please need help
Click to expand...
Click to collapse
Did u fix ur phone??? same problem happend me
You're using the original Samsung USB cable?
audit13 said:
You're using the original Samsung USB cable?
Click to expand...
Click to collapse
yes.
What file is failing in Odin?
jtk585 said:
Did u fix ur phone??? same problem happend me
Click to expand...
Click to collapse
For getting error when flash in Odin no matter what kind of error. Just need to flash out and repartition it for pit file and you get back yours phone back. The problem is the pit file must be suit to flash your phone. If not no matter how you flash it still the same.
Yumiko87 said:
For getting error when flash in Odin no matter what kind of error. Just need to flash out and re-partition it for pit file and you get back yours phone back. The problem is the pit file must be suit to flash your phone. If not no matter how you flash it still the same.
Click to expand...
Click to collapse
thanks.
i tried many time. i try to do partition also. that time partition error is occur.
i connect with kies, i tried recovery , firmware not downloadind to my device it's stuck on 0 % , then i use that download original firmware that file in odin v3.9 , to v 11 :laugh: tried all odin. i think emmc is corrupted..!!
anyway my phone is bricked so i used every button on odin ...:laugh::laugh:
i tick T.Flash ,that time no error occur, downloaded , but nothing happened.
thanks. any chance to enable debugging mode in recovery mode.
jtk585 said:
thanks.
i tried many time. i try to do partition also. that time partition error is occur.
i connect with kies, i tried recovery , firmware not downloadind to my device it's stuck on 0 % , then i use that download original firmware that file in odin v3.9 , to v 11 [emoji23] tried all odin. i think emmc is corrupted..!!
anyway my phone is bricked so i used every button on odin ...[emoji23][emoji23]
i tick T.Flash ,that time no error occur, downloaded , but nothing happened.
thanks. any chance to enable debugging mode in recovery mode.
Click to expand...
Click to collapse
So now you still able to go download mode without error? I mean when you connect to odin it's work for You?
Yumiko87 said:
So now you still able to go download mode without error? I mean when you connect to odin it's work for You?
Click to expand...
Click to collapse
thanks
download mode working perfectly . all time.
odin only install my device when i tick T.flash. i cant install normal way
after installation nothing change. that is it.
actually i don't know what is the use of T.Flash :laugh:
thanks
jtk585 said:
thanks
download mode working perfectly . all time.
odin only install my device when i tick T.flash. i cant install normal way
after installation nothing change. that is it.
actually i don't know what is the use of T.Flash [emoji23]
thanks
Click to expand...
Click to collapse
So the installation successful until come out with pass in Odin? But it's doesnt change is revert to download mode?
Yumiko87 said:
So the installation successful until come out with pass in Odin? But it's doesnt change is revert to download mode?
Click to expand...
Click to collapse
yes PASS..! but nothing change on device
if i going to change motherboard, is my device work?
can i install any country firmware ?
bcoz motherboard get under 30 dollar. i know how to fix
so total cost is 30 cowboy:
i forget say one thing, when i choose boot loader file BL sboot.bin file is stuck... freeze.....
jtk585 said:
yes PASS..! but nothing change on device
if i going to change motherboard, is my device work?
can i install any country firmware ?
bcoz motherboard get under 30 dollar. i know how to fix
so total cost is 30 cowboy:
Pls refer to this before you go for hardware issues.
http://forum.xda-developers.com/showthread.php?t=2120726
Click to expand...
Click to collapse
Pls refer to this before you go for hardware issues.
http://forum.xda-developers.com/showthread.php?t=2120726[/QUOTE]
thanks..
<ID:0/009> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/009> Odin engine v(ID:3.1203)..
<ID:0/009> File analysis..
<ID:0/009> SetupConnection..
<ID:0/009> Initialzation..
<ID:0/009> Get PIT for mapping..
<ID:0/009> Firmware update start..
<ID:0/009> SingleDownload.
<ID:0/009> sboot.bin
<ID:0/009> FAIL!
<ID:0/009>
<ID:0/009> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
this is happening my device.
i think emmc is corrupted or my bootloader is locked.. nothing write on
jtk585 said:
Pls refer to this before you go for hardware issues.
http://forum.xda-developers.com/showthread.php?t=2120726
Click to expand...
Click to collapse
thanks..
<ID:0/009> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/009> Odin engine v(ID:3.1203)..
<ID:0/009> File analysis..
<ID:0/009> SetupConnection..
<ID:0/009> Initialzation..
<ID:0/009> Get PIT for mapping..
<ID:0/009> Firmware update start..
<ID:0/009> SingleDownload.
<ID:0/009> sboot.bin
<ID:0/009> FAIL!
<ID:0/009>
<ID:0/009> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
this is happening my device.
i think emmc is corrupted or my bootloader is locked.. nothing write on [/QUOTE]
Try both:http://cloud.tapatalk.com/s/580ff78a7f0a7/N9005XXUENB4_N9005DBTENB1_DBT_PIT.zip
http://cloud.tapatalk.com/s/580ff790b5dbe/SM-N9005 OXX pit.zip
If still failed sry to tell you need to change motherboard aredy. As I faced such issues on my n3 and I able to recovery well using my pit files via Odin without fail. So might be your hardware problem aredy.
The sboot.bin file is not flashing because the rom is either not for the phone or the phone bootloader is too new.
Are you a using the original USB cable?
audit13 said:
The sboot.bin file is not flashing because the rom is either not for the phone or the phone bootloader is too new.
Are you a using the original USB cable?
Click to expand...
Click to collapse
Thanks..
yes dude
Original USB Cable
S3 GT-I9305 LTE
Kit kat 4.4.4. EVR EE Europe international Firmware
i did root this phone
i think bootloader not allowed to write anything on it or corrupted
what you think ??
---------- Post added at 09:59 AM ---------- Previous post was at 09:56 AM ----------
Try both:http://cloud.tapatalk.com/s/580ff78a7f0a7/N9005XXUENB4_N9005DBTENB1_DBT_PIT.zip
http://cloud.tapatalk.com/s/580ff790b5dbe/SM-N9005 OXX pit.zip
If still failed sry to tell you need to change motherboard aredy. As I faced such issues on my n3 and I able to recovery well using my pit files via Odin without fail. So might be your hardware problem aredy.[/QUOTE]
can i use this pit or firmware on my GT-I9305 device
is it work?
thanks
jtk585 said:
Thanks..
yes dude
Original USB Cable
S3 GT-I9305 LTE
Kit kat 4.4.4. EVR EE Europe international Firmware
i did root this phone
i think bootloader not allowed to write anything on it or corrupted
what you think ??
---------- Post added at 09:59 AM ---------- Previous post was at 09:56 AM ----------
Try both:http://cloud.tapatalk.com/s/580ff78a7f0a7/N9005XXUENB4_N9005DBTENB1_DBT_PIT.zip
http://cloud.tapatalk.com/s/580ff790b5dbe/SM-N9005 OXX pit.zip
If still failed sry to tell you need to change motherboard aredy. As I faced such issues on my n3 and I able to recovery well using my pit files via Odin without fail. So might be your hardware problem aredy.
Click to expand...
Click to collapse
can i use this pit or firmware on my GT-I9305 device
is it work?
thanks[/QUOTE]
This will only for n9005. Not 9305.
Hello, today my friend gave me his S3 I9300. Don't know what he did with device but it can't start.
- Recovery mode doesn't work (see a lot of errors)
- Download mode works but I can't flash firmware via Odin 3.07, 3.09
Can anybody helps me please? S3 has official ROM and I flash official ROM of course.
I downloaded ROM for my country of course.
Don't have Kies, tried reinstall Samsung USB drivers, tried replace USB port.
Will be very thankful for all your ideas how to fix that.
Video of S3:
https://www.youtube.com/watch?v=YDDtiqhmTBg
Log from ODIN:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9300XXUGNA5_I9300OXXGNB2_I9300XXUGNA8_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> boot.img
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
Are u using a PIT file in Odin? Is re-partition checked? Also ask ur friend if he has repartitioned the device before
GT-I9300
OmniROM 4.4.4
Boeffla Kernel 2.4NG Beta4
GravityBox + XGELS
XDA Free App
Renecek said:
Hello, today my friend gave me his S3 I9300. Don't know what he did with device but it can't start.
- Recovery mode doesn't work (see a lot of errors)
- Download mode works but I can't flash firmware via Odin 3.07, 3.09
Can anybody helps me please? S3 has official ROM and I flash official ROM of course.
I downloaded ROM for my country of course.
Don't have Kies, tried reinstall Samsung USB drivers, tried replace USB port.
Will be very thankful for all your ideas how to fix that.
Video of S3:
https://www.youtube.com/watch?v=YDDtiqhmTBg
Log from ODIN:
Click to expand...
Click to collapse
1. Flash a new recovery and than make a factory reset
2. Install the latest samsung fimrware.
3. Maybe try it with odin1.85
Tkkg1994 said:
1. Flash a new recovery and than make a factory reset
2. Install the latest samsung fimrware.
3. Maybe try it with odin1.85
Click to expand...
Click to collapse
Tried install the stock recovery with bad result..
jinayhvora: he doesn't know what he did, he tried all
Renecek said:
Tried install the stock recovery with bad result..
jinayhvora: he doesn't know what he did, he tried all
Click to expand...
Click to collapse
Nand write fail usually means your Nand is corrupt and you need service repair.You can try rescue firmware here >> http://forum.xda-developers.com/showpost.php?p=30087735&postcount=6 << but i doubt it will work.
tallman43 said:
Nand write fail usually means your Nand is corrupt and you need service repair.You can try rescue firmware here >> http://forum.xda-developers.com/showpost.php?p=30087735&postcount=6 << but i doubt it will work.
Click to expand...
Click to collapse
Thanks but it didn't help me.. Same error.
Renecek said:
Thanks but it didn't help me.. Same error.
Click to expand...
Click to collapse
I thought not I think you need service repair new motherboard i'm afraid.:crying:
tallman43 said:
I thought not I think you need service repair new motherboard i'm afraid.:crying:
Click to expand...
Click to collapse
I ment a custom recovery not the stock oneeeee