Hello, i flashed my s3 to Omega rom then after trying to restore my EFS using Hc-ktool, now my phone is stuck at boot logo and failed to load, i tried to restore my phone to stock firmware using ODIN but still the same. still stuck at samsung galaxy logo. any ideas?
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9300XXEMA2_I9300XEFELL1_I9300XXELKB_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> tz.img
<ID:0/003> NAND Write Start!!
<ID:0/003> sboot.bin
<ID:0/003> system.img
<ID:0/003> boot.img
<ID:0/003> recovery.img
<ID:0/003> cache.img
<ID:0/003> hidden.img
<ID:0/003> modem.bin
<ID:0/003> RQT_CLOSE !!
<ID:0/003> RES OK !!
<ID:0/003> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
Boot into recovery and factory reset.
boomboomer said:
Boot into recovery and factory reset.
Click to expand...
Click to collapse
i tried it still no luck :crying:
try flashing a custom recovery(CWM touch or PHILZ) and then making a full wipe from recovery.
sriram231092 said:
try flashing a custom recovery(CWM touch or PHILZ) and then making a full wipe from recovery.
Click to expand...
Click to collapse
i made a full wipe/factory reset, dalvik cache, wipe cache partition still not working. could this be a hardware issue?
d_tan10 said:
i made a full wipe/factory reset, dalvik cache, wipe cache partition still not working. could this be a hardware issue?
Click to expand...
Click to collapse
Download the firmware agin .
Flash stock rom to test hardware after a full wipe
JJEgan said:
Download the firmware agin .
Flash stock rom to test hardware after a full wipe
Click to expand...
Click to collapse
i downloaded a new stock firmware again from sammobile.com now im having boot loops. putting it back to stock firmware should fix the problem but mine doesnt.
d_tan10 said:
i downloaded a new stock firmware again from sammobile.com now im having boot loops. putting it back to stock firmware should fix the problem but mine doesnt.
Click to expand...
Click to collapse
which f/w did you flash? did you factory reset immediately after flashing the f/w?
sriram231092 said:
which f/w did you flash? did you factory reset immediately after flashing the f/w?
Click to expand...
Click to collapse
I9300XXEMG4_I9300XEFEMG2_I9300XXEMG4_HOME.tar.md5
Yes i did a factory reset/data wipe using stock recovery
d_tan10 said:
I9300XXEMG4_I9300XEFEMG2_I9300XXEMG4_HOME.tar.md5
Yes i did a factory reset/data wipe using stock recovery
Click to expand...
Click to collapse
now that is odd! restoring EFS should have bricked the phone! but that's not a hard brick. as you have flashed XXEMG4, now you have a chance of flashing a f/w newer than that(like XXEMG5 or XXMEG6)! try flashing either of these. if the problem still persists, send it to service center.
:good:
have you tried removing the battery for a few minutes ?
sriram231092 said:
now that is odd! restoring EFS should have bricked the phone! but that's not a hard brick. as you have flashed XXEMG4, now you have a chance of flashing a f/w newer than that(like XXEMG5 or XXMEG6)! try flashing either of these. if the problem still persists, send it to service center.
:good:
Click to expand...
Click to collapse
Yes i can flash stock firmware using Odin also able to install Custom rom using CWM. the problem is just the booting up, im downloading I9300XXEMG6_I9300PHNEMG2_PHN.zip now. Do you think the service center will repair my phone even if they see i have flash counts?
ashraf sharif said:
have you tried removing the battery for a few minutes ?
Click to expand...
Click to collapse
Yes, i took the battery,SIM,memory card out and put it back
have you tried kies? if not do this, BEFORE CONNECTING PHONE TO PC start kies go to upgrade and initialisation. enter your phone model number and serial number. put phone in download mode, vol down +home+power NOW CONNECT PHONE TO PC. this should force kies to upgrade your firmware
d_tan10 said:
Yes i can flash stock firmware using Odin also able to install Custom rom using CWM. the problem is just the booting up, im downloading I9300XXEMG6_I9300PHNEMG2_PHN.zip now. Do you think the service center will repair my phone even if they see i have flash counts?
Click to expand...
Click to collapse
they will repair what ever may happen to your phone but will charge you. did you try flashing CM10.2 roms or aosp custom roms?
since odin is not solving your issue than perhaps kies may fix it. i would try kies before service center as it probably will work .even if it does not solve the looping it would leave your phone with official status and may even allow you to get your phone fixed under warranty. after all kies and ota updates are the only official ways to upgrade your firmware under warranty.
Ok thanks, ill keep you guys posted on the status of my phone
XXEMG6 didnt work for me still stuck on the boot loop and also samsung kies, is there any other way i can fix my phone before going to the service center?
maybe flash an emergency firmwareRescue http://forum.xda-developers.com/showthread.php?t=1825272 these firmwares have pit partitions if you flash pit better make sure its the right one
d_tan10 said:
XXEMG6 didnt work for me still stuck on the boot loop and also samsung kies, is there any other way i can fix my phone before going to the service center?
Click to expand...
Click to collapse
send it to SC before something very bad happens to your phone. you should've been careful while flashing. hope you get your phone in a good working condition.
:good:
Related
Hello, after restore my efs backup with ktool app the phone is in bootloop. The first logo appears("samsung galaxy s3") and the phone reboot again...i´ve access to download mode and
cwm. i´ve tried to wipe everything, and flash a stock rom via odin, but no luck. i´ve tried instead of wipe, format data, cache and system then flash stock rom via odin, but no luck again..
I did a backup of my efs partition before restore my old efs backup...
what can i do? thanks, sorry for my bad english
What does Odin say when you try to flash the stock rom?
Format each and everything apart from sdcard in cwm and try.
Odin shouldn't fail unless you're doing something wrong..
masterex567 said:
What does Odin say when you try to flash the stock rom?
Format each and everything apart from sdcard in cwm and try.
Odin shouldn't fail unless you're doing something wrong..
Click to expand...
Click to collapse
no, odin flash it successfully, but bootloop persists.. i ´ve done all the "formats" you suggested, and then flashed stock rom via odin, but same problem...
thanks
<ID:0/009> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9300XXDLJ4_I9300TPHDLJ1_I9300XXDLID_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/009> Odin v.3 engine (ID:9)..
<ID:0/009> File analysis..
<ID:0/009> SetupConnection..
<ID:0/009> Initialzation..
<ID:0/009> Get PIT for mapping..
<ID:0/009> Firmware update start..
<ID:0/009> system.img
<ID:0/009> NAND Write Start!!
<ID:0/009> boot.img
<ID:0/009> cache.img
<ID:0/009> hidden.img
<ID:0/009> recovery.img
<ID:0/009> modem.bin
<ID:0/009> RQT_CLOSE !!
<ID:0/009> RES OK !!
<ID:0/009> Removed!!
Hm.
try getting warranty from samsung.
They might take a look.
from the looks of this, it seems more complicated.
because if odin flashed everything succesfullly. There can't be any problem.
Try getting another odin package and see...
masterex567 said:
Hm.
try getting warranty from samsung.
They might take a look.
from the looks of this, it seems more complicated.
because if odin flashed everything succesfullly. There can't be any problem.
Try getting another odin package and see...
Click to expand...
Click to collapse
no need xD i flashed an ICS stock rom and phone is alive again xD ufff.....
thanks
antunes20 said:
no need xD i flashed an ICS stock rom and phone is alive again xD ufff.....
thanks
Click to expand...
Click to collapse
Haha.
A problem like that would have scared the hell out of me too.
Take a nandroid backup as well now.
And, you can go on and flash LL5. :high-five:
antunes20 said:
Hello, after restore my efs backup with ktool app the phone is in bootloop. The first logo appears("samsung galaxy s3") and the phone reboot again...i´ve access to download mode and
cwm. i´ve tried to wipe everything, and flash a stock rom via odin, but no luck. i´ve tried instead of wipe, format data, cache and system then flash stock rom via odin, but no luck again..
I did a backup of my efs partition before restore my old efs backup...
what can i do? thanks, sorry for my bad english
Click to expand...
Click to collapse
Hi I think I have the same problem here
can you give me the link to the ICS rom that you use to fix your problem
wydarwin said:
Hi I think I have the same problem here
can you give me the link to the ICS rom that you use to fix your problem
Click to expand...
Click to collapse
Check here and pick your region / country
http://forum.xda-developers.com/showthread.php?t=1646610
antunes20 said:
Hello, after restore my efs backup with ktool app the phone is in bootloop. The first logo appears("samsung galaxy s3") and the phone reboot again...i´ve access to download mode and
cwm. i´ve tried to wipe everything, and flash a stock rom via odin, but no luck. i´ve tried instead of wipe, format data, cache and system then flash stock rom via odin, but no luck again..
I did a backup of my efs partition before restore my old efs backup...
what can i do? thanks, sorry for my bad english
Click to expand...
Click to collapse
factory reset usually helps when bootloop occur.
Sent from my Supercharged V12 Samsung Galaxy S3 using Tapatalk
Hey guys,
I recently flashed null_24 custom rom and after rebooting the phone it got stuck at the Samsung Galaxy s3 logo.
When trying to enter CWM (Touch recovery) i get a black screen and it seems to freeze.
I was able to enter download mode and tried to flash stock rom via Odin.
I tried rebooting my PC and using different USB ports but it failed every time...
Then i tried to recover my phone via kies but it got stuck at 0%
Is there anything i can do or is my phone broken for good?
I could use any help!
Thanks in advance
You need to give more detail.
Do you have an internation or usa s3?
What error did you get with odin?
If you flashed a rom image for a different phone then your phone is probably bricked. Likewise if you get pit errors in odin. If thats the case then it needs a repair job.
Sent from my GT-I9300 using xda premium
I have an international s3
I flashed null_ roms before, and hat no problems with them. But null_24 didn't let me boot and froze my cwm.
Here's my Odin log:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> KIES_HOME_I9300XXDLJ4_I9300OXADLJ4_368423_REV00_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> boot.img
<ID:0/004> NAND Write Start!!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<ID:0/004> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
The log doesnt look good. I would not mess with it until somebody more knowledgable can help.
If you try things like pit files you may make it beyond repair by yourself and need to send it somewhere for repair.
Sorry I cant really help you further and I hope you get it sorted.
Sent from my GT-I9300 using xda premium
Boot into recovery and wipe data (if on stock recovery your internal SD will be wiped) then try flashing another Odin image.
Sent from my Nexus 7 using Tapatalk HD
Theshawty said:
Boot into recovery and wipe data (if on stock recovery your internal SD will be wiped) then try flashing another Odin image.
Sent from my Nexus 7 using Tapatalk HD
Click to expand...
Click to collapse
I can't boot into recovery anymore, when i try it my phone says: "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again." which didn't work...
Is there anything else I can do?
JonOssim said:
Is there anything else I can do?
Click to expand...
Click to collapse
No looks like you broke it and need a service centre .
jje
JonOssim said:
I can't boot into recovery anymore, when i try it my phone says: "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again." which didn't work...
Click to expand...
Click to collapse
Nope. Service Center it is.
Sent from my GT-I9300 using xda app-developers app
Is there any way I can reset the flash counter via download mode?
And is there any way to retrieve my data on my internal sd?
So I guess it's a no?
JonOssim said:
So I guess it's a no?
Click to expand...
Click to collapse
You could try install a kernel only in odin. One with a recovery. Speedmod maybe? This may give you your recovery back and odin might let it Flash.
Worth a try
Drew071
Sent from my GT-I9300 using xda app-developers app
Okay thanks!
I'll try it when i get home
I've had the same issue a couple of times, all I did was keep trying to flash the stock firmware, and eventually it worked.
I have a better experience with some older firmwares than the newest ones.
Otherwise I'd try as other mentioned, flash a recovery and wipe data and all that, and then flash firmware.
Hope it sorts out for you!
This is so frustrating!
I tried flashing the kernel hundred times but i get the same errorlog as before...
I'll try to flash older firmwares like you said ratatattata
ratatattata said:
I've had the same issue a couple of times, all I did was keep trying to flash the stock firmware, and eventually it worked.
I have a better experience with some older firmwares than the newest ones.
Otherwise I'd try as other mentioned, flash a recovery and wipe data and all that, and then flash firmware.
Hope it sorts out for you!
Click to expand...
Click to collapse
hey, did you have the same odin error log as me??
JonOssim said:
hey, did you have the same odin error log as me??
Click to expand...
Click to collapse
Yes, I believe it was just that log.
Hello,
My Galaxy s2 is stuck in boot loop, I can see only the GS2 logo.
It went into this situation after holding down power button trying to turn it off.
Tried to remove battery and nothing changed.
Entered recovery mode and did wipe cache and then reboot.
It went past the initial logo, showed samsung animation and then it went back to samsung logo boot loop. It never went to samsung animation again.
From that point on it does not boot to recovery mode, it shows the android robot with the spinning cog for a while and then it goes back to the samsung logo boot loop.
The phone can go to download mode without problem. I have not tried to install a stock firmware through odin, since I would like to get a backup of the sms messages from the phone first. I already have backup of pics, contacts, etc so I dont care about anything else besides the sms.
The phone was running the latest spanish stock JB version
GT-I9100 Galaxy S II
PDA: I9100XWLSD
CSC: I9100FOPLS4
MODEM: I9100XXLS8
Added: 2013-02-03
The only modifications to stock were
. Root when it was running ICS
. CSC change from EUR to FOP (so that it auto upgraded to JB from ICS)
The phone retained root after the auto JB upgrade
Do you know if there a solution to this situation? I am still under warranty so I can take it back to samsung so I would like to avoid installing CWM recovery kernel that would make them immediately reject service due to warranty void.
thank you in advance!
Yes, you can keep trying to flash a stock firmware in Odin. Click the link in my signature if you're having troubles with the flash failing. Flash the JB version you were on before, that's got the most chance of working with out having to wipe.
Personally, I think you're going to have to get a working recovery and factory reset to be honest.
Sent from a galaxy far, far away
Hopper8 said:
Yes, you can keep trying to flash a stock firmware in Odin. Click the link in my signature if you're having troubles with the flash failing. Flash the JB version you were on before, that's got the most chance of working with out having to wipe.
Personally, I think you're going to have to get a working recovery and factory reset to be honest.
Sent from a galaxy far, far away
Click to expand...
Click to collapse
thank you for answering, so if I install the same version through Odin, it will not wipe out the current phone contents by default?
Toliver said:
thank you for answering, so if I install the same version through Odin, it will not wipe out the current phone contents by default?
Click to expand...
Click to collapse
Correct. A 1-part firmware will not wipe by default. If you flash a 3-part firmware (JB leak, LSJ for instance) that WILL wipe by default.
If you flash something other than the firmware you were on directly before the bootloop, you've got pretty much no chance of getting out of the bootloop without a factory reset. If you flash the same firmware you were on before the bootloop, then there's a chance of getting it to boot up with all your data.
If that (flashing with the same stock ROM) doesn't work, then I'm afraid its down to a factory reset, sorry.
Hopper8 said:
Correct. A 1-part firmware will not wipe by default. If you flash a 3-part firmware (JB leak, LSJ for instance) that WILL wipe by default.
If you flash something other than the firmware you were on directly before the bootloop, you've got pretty much no chance of getting out of the bootloop without a factory reset. If you flash the same firmware you were on before the bootloop, then there's a chance of getting it to boot up with all your data.
If that (flashing with the same stock ROM) doesn't work, then I'm afraid its down to a factory reset, sorry.
Click to expand...
Click to collapse
Ok then, I will give it a try and see how it goes. Another solution that I was thinking about is to try to install CWM through odin (i'm not sure if it's possible though) then boot into CWM and get backup through it. Then if I apply a stock firmware through odin, this would remove CWM and install the stock recovery kernel back, correct?
Yes, that's possible. You can flash Philz kernel via Odin, it's stock kernel only with root CWM. Other than that its the same. You could do that procedure using his kernel. When you flash stock rom via Odin then yes, you'd get rid of the custom recovery.
Depending on what you want to do (warranty etc) read up about the flash counter and then triangle away.
Sent from a galaxy far, far away
regarding the 1-part firmware, I downloaded from sammobile the I9100XWLSD_I9100FOPLS4_FOP.zip.
The zip archive contains a tar.md5 file I9100XWLSD_I9100FOPLS4_I9100XXLS8_HOME.tar.md5 and a dll file SS_DL.dll.
So I should use only the tar.md5 in the PDA section of odin, right? should I keep this dll in the same folder as the tar.md5 in case odin needs it?
Also does it make any difference which odin version should I use?
thaks again
Well I suppose it can't hurt to put it in the same directory, but I don't know if it really does anything. Yes, flash it in the pda section.. Which version? Take your pick. I usually use 3.0.4 but have also used others. Click my signature if you want a zip file with a few versions.
Sent from a galaxy far, far away
I tried flashing the same rom as it was installed but nothing changed, after the first boot I see the robot with the cog, a thin progress bar filling below it and then it goes to boot loop. No luck getting into recovery, still the same symptom... Besides the sms backup I am thinking about how to recover it, should I try installing 4.0.3 that was the factory default? Any more ideas??
thanks again
The odin log seems clean though, no error or anything else
<ID:0/007> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9100XWLSD_I9100FOPLS4_I9100XXLS8_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> cache.img
<ID:0/007> NAND Write Start!!
<ID:0/007> factoryfs.img
<ID:0/007> hidden.img
<ID:0/007> modem.bin
<ID:0/007> boot.bin
<ID:0/007> param.lfs
<ID:0/007> Sbl.bin
<ID:0/007> zImage
<ID:0/007> RQT_CLOSE !!
<ID:0/007> RES OK !!
<ID:0/007> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/007> Removed!!
And can you try a factory reset from the stock recovery? You're not on 4.0.4 so it'll be safe.
@gastonw, can you have a look here? I know that I've seen Odin passing but still no boot... I just can't remember how on earth it was fixed. It seems I didn't bookmark it either.
Sent from a galaxy far, far away
Hopper8 said:
And can you try a factory reset from the stock recovery? You're not on 4.0.4 so it'll be safe.
@gastonw, can you have a look here? I know that I've seen Odin passing but still no boot... I just can't remember how on earth it was fixed. It seems I didn't bookmark it either.
Sent from a galaxy far, far away
Click to expand...
Click to collapse
Could you provide more details on how to do a factory reset from stock recovery? Do you mean to flash 4.0.3 via odin? Or is it some options in odin that would enforce factory reset?
More details are to search for it mate. It's covered so many times that it's just plain spoonfeeding if I'm to post it.
Sent from a galaxy far, far away
Eventually I made it work by installing the 4.0.3 EUR via odin. I did not allow it to boot into the OS, as soon as it finished flashing via odin, I rebooted into recovery mode. This time it went in successfully. Then I used the CWM recovery kernel that just runs from the sd (it does not install) and got the full backup. Later on by using nandroid manager I recovered the sms messages + more (apps, etc). Thanks for all the help!
Hey Guys,
I'm sure all of you get lots of these questions, however I have been trying for a couple of days to get this S3 going so I can just asking for help.
My main issue is I cannot flash any ROM's via Odin.
Here is some background infomation:
I started with a stock Galaxy S3 GT-i9300 International 16GB model.
Flashed the correct version of Cyanogen Mod for my Model/Sub Model.
I install this rom by flashing CWM (Clock Work Recovery Mod) and installing the update.zip from my external SD card.
I have done this before with other Samsung devices, No big deal, just factory rest and wipe the davik cache and flash the new ROM.
Well I decided to backup the original ROM via CWM's backup option. The backup completed fine but I backed it up to the phones internal storage instead of my External SD card. The new ROM worked fine till it ran out of space. So I selected the Delete option back in CWM to remove the backup file, rebooted the phone only to find I was still using 8 or so GB of storage.
So my phone was not happy. No room to download updates or save new pictures, etc.
This week I decided to flash the stock ROM back over the phone. For some reason the firmware was incorrect for that model or something was wrong with the phone.
After looking around I decided to flash a .pit file for the Galaxy S3, One problem, I did not know that different storage sizes of S3's have different .PIT files. However it flash and I still could not restore my phones ROM.
So after a few days of looking around I downloaded the stock ROM from Sam-Mobile.com for my phone and country and download GT-I9300_mx_20120220 PIT for for what I read and understood was for a 16GB GT-I9300.
So the new PIT file flashes fine, however I still cannot flash any new ROMS. I have tired the stock rom from Sam-Mobile or trying to flash Recovery-cwmtouch-6.0.3.2-GTI9300.tar (clock work recovery mod).
None of these flash. Odin3.04 just sits on "NAND Write Start!!" and there is a blue "downloading" bar that is across the screen and that's it.
Nothing else happens. I have also attached a screen shot of this.
I have a water damaged 16GB GT-i9300T that I have used to create a .PIT file from Heimdall, But that sits there for about 10 Min before Odin says "Unable to get pit map"
I have also tried this: http://forum.xda-developers.com/showthread.php?t=1916796
I get all the way to shorting out the resistor (R313) on the PCB but the phone does not turn on and fails to display "SD Card Mode"
So, can anyone help me?
I know it might be a long shot but at this point I'm willing to try anything. Any ideas would be much appreciated.
Cheers
Mitchell
Flashing just a pit file usually results in a hard brick.
You can try a rescue firmware:
http://forum.xda-developers.com/showpost.php?p=30087735&postcount=6&nocache=1&z=2665989794768393
But you probably need a new motherboard.
Thanks for that!, The recovery firmware failed to flash but the pit file flashed allowing me to install Cyanogen Mod.
Thanks for your help on this one :good:
boomboomer said:
Flashing just a pit file usually results in a hard brick.
You can try a rescue firmware:
http://forum.xda-developers.com/showpost.php?p=30087735&postcount=6&nocache=1&z=2665989794768393
But you probably need a new motherboard.
Click to expand...
Click to collapse
I. Need help to...my s3 its stuck at samsung logo. I dont have recovery. Just download Mode..i try to flash pit and no flash. Roms nand write fail. Some pits just say get pit mapping but nothing happens. Kies dont flash just 0%...how can i unbrick the iPhone please need help
Did u fix !!!
leo_hacker82 said:
I. Need help to...my s3 its stuck at samsung logo. I dont have recovery. Just download Mode..i try to flash pit and no flash. Roms nand write fail. Some pits just say get pit mapping but nothing happens. Kies dont flash just 0%...how can i unbrick the iPhone please need help
Click to expand...
Click to collapse
Did u fix ur phone??? same problem happend me
You're using the original Samsung USB cable?
audit13 said:
You're using the original Samsung USB cable?
Click to expand...
Click to collapse
yes.
What file is failing in Odin?
jtk585 said:
Did u fix ur phone??? same problem happend me
Click to expand...
Click to collapse
For getting error when flash in Odin no matter what kind of error. Just need to flash out and repartition it for pit file and you get back yours phone back. The problem is the pit file must be suit to flash your phone. If not no matter how you flash it still the same.
Yumiko87 said:
For getting error when flash in Odin no matter what kind of error. Just need to flash out and re-partition it for pit file and you get back yours phone back. The problem is the pit file must be suit to flash your phone. If not no matter how you flash it still the same.
Click to expand...
Click to collapse
thanks.
i tried many time. i try to do partition also. that time partition error is occur.
i connect with kies, i tried recovery , firmware not downloadind to my device it's stuck on 0 % , then i use that download original firmware that file in odin v3.9 , to v 11 :laugh: tried all odin. i think emmc is corrupted..!!
anyway my phone is bricked so i used every button on odin ...:laugh::laugh:
i tick T.Flash ,that time no error occur, downloaded , but nothing happened.
thanks. any chance to enable debugging mode in recovery mode.
jtk585 said:
thanks.
i tried many time. i try to do partition also. that time partition error is occur.
i connect with kies, i tried recovery , firmware not downloadind to my device it's stuck on 0 % , then i use that download original firmware that file in odin v3.9 , to v 11 [emoji23] tried all odin. i think emmc is corrupted..!!
anyway my phone is bricked so i used every button on odin ...[emoji23][emoji23]
i tick T.Flash ,that time no error occur, downloaded , but nothing happened.
thanks. any chance to enable debugging mode in recovery mode.
Click to expand...
Click to collapse
So now you still able to go download mode without error? I mean when you connect to odin it's work for You?
Yumiko87 said:
So now you still able to go download mode without error? I mean when you connect to odin it's work for You?
Click to expand...
Click to collapse
thanks
download mode working perfectly . all time.
odin only install my device when i tick T.flash. i cant install normal way
after installation nothing change. that is it.
actually i don't know what is the use of T.Flash :laugh:
thanks
jtk585 said:
thanks
download mode working perfectly . all time.
odin only install my device when i tick T.flash. i cant install normal way
after installation nothing change. that is it.
actually i don't know what is the use of T.Flash [emoji23]
thanks
Click to expand...
Click to collapse
So the installation successful until come out with pass in Odin? But it's doesnt change is revert to download mode?
Yumiko87 said:
So the installation successful until come out with pass in Odin? But it's doesnt change is revert to download mode?
Click to expand...
Click to collapse
yes PASS..! but nothing change on device
if i going to change motherboard, is my device work?
can i install any country firmware ?
bcoz motherboard get under 30 dollar. i know how to fix
so total cost is 30 cowboy:
i forget say one thing, when i choose boot loader file BL sboot.bin file is stuck... freeze.....
jtk585 said:
yes PASS..! but nothing change on device
if i going to change motherboard, is my device work?
can i install any country firmware ?
bcoz motherboard get under 30 dollar. i know how to fix
so total cost is 30 cowboy:
Pls refer to this before you go for hardware issues.
http://forum.xda-developers.com/showthread.php?t=2120726
Click to expand...
Click to collapse
Pls refer to this before you go for hardware issues.
http://forum.xda-developers.com/showthread.php?t=2120726[/QUOTE]
thanks..
<ID:0/009> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/009> Odin engine v(ID:3.1203)..
<ID:0/009> File analysis..
<ID:0/009> SetupConnection..
<ID:0/009> Initialzation..
<ID:0/009> Get PIT for mapping..
<ID:0/009> Firmware update start..
<ID:0/009> SingleDownload.
<ID:0/009> sboot.bin
<ID:0/009> FAIL!
<ID:0/009>
<ID:0/009> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
this is happening my device.
i think emmc is corrupted or my bootloader is locked.. nothing write on
jtk585 said:
Pls refer to this before you go for hardware issues.
http://forum.xda-developers.com/showthread.php?t=2120726
Click to expand...
Click to collapse
thanks..
<ID:0/009> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/009> Odin engine v(ID:3.1203)..
<ID:0/009> File analysis..
<ID:0/009> SetupConnection..
<ID:0/009> Initialzation..
<ID:0/009> Get PIT for mapping..
<ID:0/009> Firmware update start..
<ID:0/009> SingleDownload.
<ID:0/009> sboot.bin
<ID:0/009> FAIL!
<ID:0/009>
<ID:0/009> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
this is happening my device.
i think emmc is corrupted or my bootloader is locked.. nothing write on [/QUOTE]
Try both:http://cloud.tapatalk.com/s/580ff78a7f0a7/N9005XXUENB4_N9005DBTENB1_DBT_PIT.zip
http://cloud.tapatalk.com/s/580ff790b5dbe/SM-N9005 OXX pit.zip
If still failed sry to tell you need to change motherboard aredy. As I faced such issues on my n3 and I able to recovery well using my pit files via Odin without fail. So might be your hardware problem aredy.
The sboot.bin file is not flashing because the rom is either not for the phone or the phone bootloader is too new.
Are you a using the original USB cable?
audit13 said:
The sboot.bin file is not flashing because the rom is either not for the phone or the phone bootloader is too new.
Are you a using the original USB cable?
Click to expand...
Click to collapse
Thanks..
yes dude
Original USB Cable
S3 GT-I9305 LTE
Kit kat 4.4.4. EVR EE Europe international Firmware
i did root this phone
i think bootloader not allowed to write anything on it or corrupted
what you think ??
---------- Post added at 09:59 AM ---------- Previous post was at 09:56 AM ----------
Try both:http://cloud.tapatalk.com/s/580ff78a7f0a7/N9005XXUENB4_N9005DBTENB1_DBT_PIT.zip
http://cloud.tapatalk.com/s/580ff790b5dbe/SM-N9005 OXX pit.zip
If still failed sry to tell you need to change motherboard aredy. As I faced such issues on my n3 and I able to recovery well using my pit files via Odin without fail. So might be your hardware problem aredy.[/QUOTE]
can i use this pit or firmware on my GT-I9305 device
is it work?
thanks
jtk585 said:
Thanks..
yes dude
Original USB Cable
S3 GT-I9305 LTE
Kit kat 4.4.4. EVR EE Europe international Firmware
i did root this phone
i think bootloader not allowed to write anything on it or corrupted
what you think ??
---------- Post added at 09:59 AM ---------- Previous post was at 09:56 AM ----------
Try both:http://cloud.tapatalk.com/s/580ff78a7f0a7/N9005XXUENB4_N9005DBTENB1_DBT_PIT.zip
http://cloud.tapatalk.com/s/580ff790b5dbe/SM-N9005 OXX pit.zip
If still failed sry to tell you need to change motherboard aredy. As I faced such issues on my n3 and I able to recovery well using my pit files via Odin without fail. So might be your hardware problem aredy.
Click to expand...
Click to collapse
can i use this pit or firmware on my GT-I9305 device
is it work?
thanks[/QUOTE]
This will only for n9005. Not 9305.
I have the i9300 but when I boot up into download mode it says PRODUCT NAME: SGH-T999 (not my model, though). I think this is because I accidently installed the SGH-T999 version of cyangomenod.
So to try to fix it, I used odin 3.07 and the
"I9300ZSEMC1"
stock rom file to try to put it back onto stock. Odin "stopped working" and crashed and I soft-bricked my phone (Firmware upgrade encountered an issue message at boot).
I tried again using I9300XXEMC3 stock rom, but odin 3.04 says
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> tz.img
<ID:0/004> NAND Write Start!!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<ID:0/004> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
And fails. My phone says "unsupported dev_type" in red.
Can I please get some guidance? I don't know what I did wrong. What rom should I flash with odin? Should I try to flash the SGH-T999 stock rom with odin?
zhinkk said:
I have the i9300 but when I boot up into download mode it says PRODUCT NAME: SGH-T999 (not my model, though). I think this is because I accidently installed the SGH-T999 version of cyangomenod.
So to try to fix it, I used odin 3.07 and the
"I9300ZSEMC1"
stock rom file to try to put it back onto stock. Odin "stopped working" and crashed and I soft-bricked my phone (Firmware upgrade encountered an issue message at boot).
Can I please get some guidance? I don't know what I did wrong. What rom should I flash with odin? Should I try to flash the SGH-T999 stock rom with odin?
Click to expand...
Click to collapse
Try this: http://forum.xda-developers.com/showthread.php?t=2535367
Hope it help.
TheoDores said:
Try this: http://forum.xda-developers.com/showthread.php?t=2535367
Hope it help.
Click to expand...
Click to collapse
I tried following those instructions. I managed to flash the .PIT file. Now I don't see the error message at boot, my screen is just black. BUT I can "sorta" boot into recovery mode (starting recovery message shows for one second, then black screen again). So I'm still stuck.
I can STILL boot into download mode though. And if I try to use CF-Root Odin fails again (same error) and my phone says "unsupported_devtype".
Flash stock rom via Odin .
But flashing a wrong firmware for a different phone may well be a lot more than a soft brick
Did you also flash wrong recovery ???
JJEgan said:
Flash stock rom via Odin .
But flashing a wrong firmware for a different phone may well be a lot more than a soft brick
Did you also flash wrong recovery ???
Click to expand...
Click to collapse
Everytime I flash the stock rom odin fails and phone says "unsupported dev_type". In Download mode it says my phone model is T999, but it's actual GT-I9300.
And I don't think I did. I think I had clockwork mod recovery, I'm not too sure though.
You have flashed at least the T999 bootloader, which is why it says that in download mode. If flashing a full i9300 stock rom doesn't help then you'll need a new motherboard.
boomboomer said:
You have flashed at least the T999 bootloader, which is why it says that in download mode. If flashing a full i9300 stock rom doesn't help then you'll need a new motherboard.
Click to expand...
Click to collapse
That really depresses me. Are you sure this is the only solution? Because I remember when my phone WAS working I booted into download mode once and it said the same "T999 Model" and I could still use it. This only happened after I tried flashing the stock i9300 stock rom.
I think it's the cyanogenmod installer that flashed this T999 bootloader for me. When I used the cyanogenmod installer it detected my phone as a AT&T phone and I was dumb enough to click "install" thinking it would work for all galaxy S3's.
I think this guide is exactly what I need (since it restores bootloader), but I can't seem to complete all the steps: http://forum.xda-developers.com/showthread.php?t=2535367
I get to #5 but once I try to install CF-ROOT through odin it says the same unsupported dev type error on my phone.
This is the error I get when trying to use CF-ROOT through Odin3 v1.85:
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> recovery.img
<ID:0/004> NAND Write Start!!
<ID:0/004> cache.img
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
(along with the red "Unsupported dev_type" on my phone in download mode).
I think it was already rooted though, maybe someone could help me reinstall the recovery (cwm) so I can install the bootloader from that guide I just linked?
Best option is to try a rescue firmware, which might help:
http://forum.xda-developers.com/showpost.php?p=30087735&postcount=6&nocache=1&z=8215224728919566
Sent from my GT-I9300 using Tapatalk
boomboomer said:
Best option is to try a rescue firmware, which might help:
http://forum.xda-developers.com/showpost.php?p=30087735&postcount=6&nocache=1&z=8215224728919566
Sent from my GT-I9300 using Tapatalk
Click to expand...
Click to collapse
Will this delete my EFS? I remember I backed up efs with this guide: http://forum.xda-developers.com/showthread.php?t=1852255
I did: "adb reboot nvbackup"
By restoring to "complete" factory settings, won't this efs be deleted? Can I still backup my efs in my 'soft brick' mode I'm in?
Alright, I've tried using the rescure firmware and all the files, but every time I try I get it a FAIL on odin:
Code:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> BOOTLOADER_I9300XXEMG4_1314436_REV00_user_low_ship.tar.md5 is valid.
<OSM> CODE_I9300XXEMG4_1314436_REV00_user_low_ship.tar.md5 is valid.
<OSM> MODEM_I9300XXEMG4_1314436_REV00_user_low_ship.tar.md5 is valid.
<OSM> CSC_I9300OXAEMG4_KOR_FACTORY_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003>
<ID:0/003> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
And my phone says in red "SECURE CHECK FAIL : PIT".
I've spent 12 hours on this now...
Did you try Kies yet?
Do you still have a custom recovery?
I'm not sure about that adb nvbackup you have done. As far as i know it's only for Qualcomm chipsets not Exynos. Maybe you have severely damaged the device. But try Kies first or if you still have root access with recovery try to flash the bootloader manually.
If everything fails contact the low level guys like @AdamOutler or @Entropy512. They might be your last hope.
DualJoe said:
Did you try Kies yet?
Do you still have a custom recovery?
I'm not sure about that adb nvbackup you have done. As far as i know it's only for Qualcomm chipsets not Exynos. Maybe you have severely damaged the device. But try Kies first or if you still have root access with recovery try to flash the bootloader manually.
If everything fails contact the low level guys like @AdamOutler or @Entropy512. They might be your last hope.
Click to expand...
Click to collapse
I tried Kies on two different computers, but whenever I connect my S3 it just says "connecting" forever and never connects to my phone. Tried solutions online, couldn't get it to work.
And I have root access, but can't boot into recovery (says "recovery booting" for a few seconds then goes black screen). So I don't know if I can flash the bootloader manually, unless I did it with odin.
And those seem like busy developers, would they really have time for me? I don't even know what I would ask. :S
Sorry I seem so clueless, I'm just upset/sad/confused/everything right now. Saved up for this phone for a while.
Try to flash the bootloader only. There are different ones. Maybe you need one that is not blacklisted if that's even possible.
Last option that comes to my mind is an external jtag flasher. Maybe you have a local service shop or similar in your area that could help with that.
DualJoe said:
Try to flash the bootloader only. There are different ones. Maybe you need one that is not blacklisted if that's even possible.
Last option that comes to my mind is an external jtag flasher. Maybe you have a local service shop or similar in your area that could help with that.
Click to expand...
Click to collapse
Hmm when I had a functional phone it said I had the ZSEMC1 stock rom, so the "bootLoader_ZSEMC1.tar.md5" flashed from odin should work? I got it off this thread: http://forum.xda-developers.com/showthread.php?t=2189063
But I don't know if I'm still on ZSEMC1 since I flashed XXEMC3 with odin (but I think it failed) and I got soft bricked.
What could go wrong? Could I hard brick it by installing that bootloader?
I have no clue but i think all I9300 bootloaders would be ok. Your problem probably is rather to find one that gets accepted. Try the latest one for I9300. There is a thread with different bootloaders somewhere here i guess.
Also try to flash a custom recovery like twrp or cwm. I'm not sure if official tools like odin have a separate bootloader check that prevents cross model flashing. No one really knows how you did that. Maybe it's necessary to be done with dd.
DualJoe said:
I have no clue but i think all I9300 bootloaders would be ok. Your problem probably is rather to find one that gets accepted. Try the latest one for I9300. There is a thread with different bootloaders somewhere here i guess.
Also try to flash a custom recovery like twrp or cwm. I'm not sure if official tools like odin have a separate bootloader check that prevents cross model flashing. No one really knows how you did that. Maybe it's necessary to be done with dd.
Click to expand...
Click to collapse
I tried the ZSEMC1 and XXEMC3 and XXEMG5 bootloaders from this thread and they didn't work: http://forum.xda-developers.com/showthread.php?t=2189063
(shows unsupported dev type)
How do I get the 'latest' boot loader? That thread is the only one I could really find.
And also I did try installing cwm through odin. It didn't "fail" but it doesn't work when I try to boot into recovery. I'm guessing this has to do with my locked bootloader?
Really don't know what to do at this point. :/
New motherboard if you have tried the fixes .
Check if 'adb shell' is working in recovery nevertheless. Maybe it's just a display issue in cwm. Also try twrp.
If all that fails go to a mobile shop near you asking for a jtag flash. It shouldn't be too expensive or something. Hardest part is probably to find one locally...
DualJoe said:
Check if 'adb shell' is working in recovery nevertheless. Maybe it's just a display issue in cwm. Also try twrp.
If all that fails go to a mobile shop near you asking for a jtag flash. It shouldn't be too expensive or something. Hardest part is probably to find one locally...
Click to expand...
Click to collapse
I tried cwm and twrp. They both install successfully on odin but have the same "recovery starting...." message and they don't work. I've tried connecting the USB when it's in this "recovery" mode but my computer doesn't detect it so I can't start up adb and interface with it.
And also, I doubt I'm going to be able to find any in northwest ohio.I wonder if this service is any good?
http://mobiletechvideos.mybigcommerce.com/samsung-galaxy-s-iii-jtag-brick-repair/
Looks promising for $50.
Sorry I've been on this problem for so long guys, I'm just stubborn and can't get over the fact that it's a software brick and I need to replace hardware. :/