Hi All
A friend of mine was using the leaked 4.1.2 firmware and every thing was fine , suddenly the device is stucked at Samsung Logo
Trying to install I9300ZSBLI1 via Odin but i always get a Fail message
Of course tried wiping the device from recovery but there is punch of errors as shown below
Any help ?!
Thanks in advance
Its stock recovery not CWM .
Trying to install I9300ZSBLI1 via Odin but i always get a Fail message
and what where and when would help .
jje
MohamedYousri said:
Hi All
A friend of mine was using the leaked 4.1.2 firmware and every thing was fine , suddenly the device is stucked at Samsung Logo
Trying to install I9300ZSBLI1 via Odin but i always get a Fail message
Of course tried wiping the device from recovery but there is punch of errors as shown below
Any help ?!
Thanks in advance
Click to expand...
Click to collapse
flash via pc odin may it help u
I an using Odin 3.07 for windows but with no luck , i get FAIL immediately
JJEgan said:
Its stock recovery not CWM .
Trying to install I9300ZSBLI1 via Odin but i always get a Fail message
and what where and when would help .
jje
Click to expand...
Click to collapse
You can wipe from stock recovery too. Op try download different rom and try again
Sent from my GT-I9300 using XDA Premium HD app
can a PIT file solve the problem or it will kill phone for ever ?!
Ausboy 2011 said:
You can wipe from stock recovery too. Op try download different rom and try again
Sent from my GT-I9300 using XDA Premium HD app
Click to expand...
Click to collapse
every time i try to wipe i get the same error .... will try a 1 file ROM for 4.1.2 late but i guess that it will not work and problem is bigger than that
My SGS3 failed in much the same way, would not get past the first boot screen whatever I tried. I was able to get it into download mode with a jig, but could not flash anything to it. Samsung said they would take it back for repair but that would have meant being without it for over a week. Fortunately I'd bought it from Amazon and they were happy to send a replacement with next-day delivery.
Ausboy 2011 said:
You can wipe from stock recovery too. Op try download different rom and try again
Sent from my GT-I9300 using XDA Premium HD app
Click to expand...
Click to collapse
Yes but with CWM advice would be to format ..
As we still dont know where Odin is failing its the end of the story .
jje
how can i install the custome recovery while the phone is dead ??!!
Odin using 1 file firmware
<ID:0/013> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9300XXELLB_I9300OJVELL3_I9300XXELLA_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/013> Odin v.3 engine (ID:13)..
<ID:0/013> File analysis..
<ID:0/013> SetupConnection..
<ID:0/013> Initialzation..
<ID:0/013> Get PIT for mapping..
<ID:0/013> Firmware update start..
<ID:0/013> tz.img
<ID:0/013> NAND Write Start!!
<ID:0/013>
<ID:0/013> Complete(Write) operation failed.
<ID:0/013> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
4 files ICS Firmware
<ID:0/013> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> BOOTLOADER_I9300ZSBLI1_1036303_REV00_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CODE_I9300ZSBLI1_1036303_REV00_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> MODEM_I9300ZSBLI1_1036303_REV00_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CSC_OZS_I9300OZSBLI1_1036303_REV00_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/013> Odin v.3 engine (ID:13)..
<ID:0/013> File analysis..
<ID:0/013> SetupConnection..
<ID:0/013> Initialzation..
<ID:0/013> Get PIT for mapping..
<ID:0/013> Firmware update start..
<ID:0/013> sboot.bin
<ID:0/013> NAND Write Start!!
<ID:0/013> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)
Damaged Nand replace motherboard .
jje
JJEgan said:
Damaged Nand replace motherboard .
jje
Click to expand...
Click to collapse
is this your final opinion , there is no other chance that i can solve this issue with software tries ?!
any other tricks i shall try ?!
try flashing the correct pit file, but that's your last shot
Glebun said:
try flashing the correct pit file, but that's your last shot
Click to expand...
Click to collapse
tried all PIT files for i9300 alone , with 1 file firmware and with 4 files firmware ICS and JB ,, same problem , PIT file is written succefuly but can't flash the firmware
if it's a dead end and the phone have the eMMC problem , the device is still in warranty but the counter is 3 and system is modified
is there a way to kill the device at all without being able to access the recovery or download mode so i can send it to warranty as this issue is already from samsung and not related to user
MohamedYousri said:
if it's a dead end and the phone have the eMMC problem , the device is still in warranty but the counter is 3 and system is modified
is there a way to kill the device at all without being able to access the recovery or download mode so i can send it to warranty as this issue is already from samsung and not related to user
Click to expand...
Click to collapse
that would be insurance fraud and that's a felony, can't discuss it here
Glebun said:
that would be insurance fraud and that's a felony, can't discuss it here
Click to expand...
Click to collapse
i agree with you if it was my fault and the phone damaged by me , it's already out from Samsung with this problem so we have the right to send it back to them even if we played with some costume ROMs or Root
anyway i guess erase nand flash in Odin will do the job ,, will give it a try the phone is already dead and useless and my frined lost it anyway
MohamedYousri said:
i agree with you if it was my fault and the phone damaged by me , it's already out from Samsung with this problem so we have the right to send it back to them even if we played with some costume ROMs or Root
anyway i guess erase nand flash in Odin will do the job ,, will give it a try the phone is already dead and useless and my frined lost it anyway
Click to expand...
Click to collapse
yeah, you can send it back, but damaging the phone to get warranty is, as mentioned before, fraud.
Hi There,
After using temasek's stock android rom a while without any problem my galaxy s3 won't turn on anymore. About a month ago my S3 suddenly shutted down and now I get a bootloop where I only see the samsung logo reappearing every 5 seconds. I can't go into recovery mode, only into download mode. So my phone is soft bricked i supposed.
I tried almost everything, I searched for weeks for a sollution on XDA and I didn't found anything that could help me. So now i'm asking you guys because i'm a little bit desperate and i'm using my old nokia 3310 for a couple of weeks now.
I tried to reinstall my original firmware which I downloaded on sammobile with odin but there is always some kind of error.
I tried several versions of odin (new one's, olders one's) And still no progress.
Here's the log from odin v 1.85 :
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> GT-I9300_PHN_I9300XXALE8_I9300PHNALE4_I9300XXLE8.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006>
<ID:0/006> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
I just checked off the box "PDA" and "AUTO REBOOT" and "F. RESET TIME" . When I use a pit file this is the log of odin:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> GT-I9300_PHN_I9300XXALE8_I9300PHNALE4_I9300XXLE8.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> All threads completed. (succeed 0 / failed 0)
I'm sure that i used the right firmware, I've tried different pc's, i've also tried differend firmwares... Always a damn error in odin...
Can anyone help me?
ID:0/006> There is no PIT partition.
If you use a PIT file it has to be the right PIT file .
jje
JJEgan said:
ID:0/006> There is no PIT partition.
If you use a PIT file it has to be the right PIT file .
jje
Click to expand...
Click to collapse
I used the GT-I9300_mx_20120329.pit file which was suggested in this topic: http://forum.xda-developers.com/showthread.php?t=1894548&highlight=stock+firmwares
Weird. Sounds like SDS. What kernel were you using aling with Temasek s ROM?? And which version??
dhirend_6d said:
Weird. Sounds like SDS. What kernel were you using aling with Temasek s ROM?? And which version??
Click to expand...
Click to collapse
Version 77 and his kernel!
I rooted my international SG3 over a year ago. I originally used it on vodafone in Germany, but I was using it on T-mobile in the USA now. It was working fine, until one morning while it just showed the "Samsung" boot logo, and wouldn't go any further. I took out the battery and tried rebooting it, but it never gets past the Samsung logo. I tried putting it into recovery mode, and the same thing. I am able to get to the download mode.
I tried using the same method I used to root the phone originally and Odin is telling me the pit file is missing or inaccessible. I didn't mess with the pit file when I rooted it originally. Do I need to put a new .pit file with Odin? I'm hesitant to do that without knowing what I am doing, however right now I have a non-functioning phone, so I don't have anything to lose, but I wanted some more expert advice before I try that.
What does it say on the phone screen in download mode please
Sent from my GT-I9300 using Tapatalk 2
rootSU said:
What does it say on the phone screen in download mode please
Sent from my GT-I9300 using Tapatalk 2
Click to expand...
Click to collapse
At the top left it says:
ODIN MODE:
PRODUCT NAME:
CUSTOM BINARY DOWNLOAD: No
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Custom
Then it has the green android on the center, and then Downloading... Do Not turn off Target!!
The ODIN log when I try and download the md5 file by selecting PDA and the file:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CF-Auto-Root-m0-m0xx-gti9300.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003>
<ID:0/003> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
Half SDS. Needs motherboard replacing via service.
Before you ask, no there is no alternative
Sent from my GT-I9300 using Tapatalk 2
In mode download
PRODUCT NAME :
CUSTOM BYNARY DOWNLOAD: NO
CURRENT BINARYñ Samsung Official
SYSTEM STATUS: CUSTOM
Help.
If you can get into download, try flashing a stock ROM
Sent from my GT-I9300 using Tapatalk 4
When do I get this message "There is not pit partition"
elmazter said:
When do I get this message "There is not pit partition"
Click to expand...
Click to collapse
You might need to send it in for service then. Sounds like SDS if I'm not mistakened or at least something to do with the memory
Sent from my Nexus 7 using Tapatalk 4
when I want to do the installation by odin I get this message
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> BOOTLOADER_I9300_REV00_user_low_ship.tar.md5 is valid.
<OSM> CODE_I9300XXDLJ4_368423_REV00_user_low_ship.tar.md5 is valid.
<OSM> MODEM_I9300XXDLID_REV00_user_low_ship.tar.md5 is valid.
<OSM> CSC_BTU_I9300OXADLJ4_368423_MULTI_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004>
<ID:0/004> Re-Partition operation failed.
<ID:0/004> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
Wrong forum .
You now require a service centre
What jje said.
Sent from my SGH-I747 using xda app-developers app
Classical SDS (dead eMMC). Take it to a service center. ("Custom" should not be an issue - it's a symptom of the failed eMMC.)
Sent from my GT-I9305 using xda app-developers app
got SGS3 LTE Shv-e210s in same Situation, no hope
any idea ?
umar_fiaz said:
got SGS3 LTE Shv-e210s in same Situation, no hope
any idea ?
Click to expand...
Click to collapse
SDS is a complete eMMC failure nothing you can do there. Only an official service center can help you by replacing your phone's motherboard.
hi guys. my i9300 is bricked. I tried to flash roms with odin.
it stucked at samsung gt-i9300 galaxy s3 text. no samsung logo.
Also I can't get in to recovery mode.
When i try to flash any rom (included stock rom) i get this error
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CheckROM_V4_LG8.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005>
<ID:0/005> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
I tried many of PIT files. Still the same error.
Sorry for my english
I had a similar issue. Here's now I resolved it.
http://forum.xda-developers.com/galaxy-s3/help/stuck-download-mode-t2683033
You have to flash a full stock firmware with the pit, best use the rescue firmware thread in general forum.
Sent from my GT-I9300 using Tapatalk
boomboomer said:
You have to flash a full stock firmware with the pit, best use the rescue firmware thread in general forum.
Sent from my GT-I9300 using Tapatalk
Click to expand...
Click to collapse
I tried this topic http://forum.xda-developers.com/galaxy-s3/general/odinfirmware-sgsiii-i9300-prerooted-t1825272
I had a similar issue. Here's now I resolved it.
http://forum.xda-developers.com/gala...-mode-t2683033
Click to expand...
Click to collapse
I downloaded this pit file. Still the same pit error. When i use GT-I9300.pit file 1st square doesn't change.
Also
ODİN MODE
Product name:
Custom Binary Download: No
Current Binary: Samsung
System Status: Custom