Hi.
I'm very new in this aspect so please be gentle
Did You heard about this device from NavRoad. I have version with 3g - price was good (i hope) and the spec. isnt bad.
But i have a problem - WiFi modul isnt working as it should. It has very smal range and sometimes it can breake the connection to router.(if the device is to far from router for example- 5-7m not including walls or something like this.
Probably it is problem with bad soft id device(now it;s 4.1.1), and this new upgrade from NavRoad(no one knows when this will be) should correct this problem, but for now I would like to ask all You what this could be? Is there any soft that could repair my problem with wifi or this is hardware problem?
I didnt find nothing what would be help to me on this problem.
Full spec. availible on NavRoad site. Just look for Nexo 3g....
PS: Sorry form my bad english
Thanks
No reply for me?
No one knows?
Probably nobody knows this device.
I can't establish connection via Cisco AnyConnect because there isn't drivers TunTap.
Related
Hey guys,
I do got some issues with the WIFI reception on my gtab. The signal is always very low and weak. I tried every rom, even did an NVFlash to go stock but that didnt help either. I did put carbon stickers on the whole device though, can that have any impact? Are there more people with this problem and if so have you got stickers on the device? Please let me know, thanks in adance!!
Peace!
After submitting this post my connection dropped which it also does more often.
Anyone has a clue?
3sade,
I actually had this same problem about 2 weeks ago. I would be directly over my WiFi AP and had a weak signal (2bars) no matter what ROM I used. I called up GTab support (310) 228-4000 and opened a RMA with them. Despite what's I've read in other posts, support was very nice and willing to help for me. They will tell you that you'll have to remove the carbon stick from the device and restore it to the stock ROM. That part sucks but when I got my gtab back (14 business day wait), it is in better working condition then when I sent it to them (the screen is more responsive, seems less sluggish with the stock ROM).
I don't know if this is what you were hoping to hear, but I thought I would pass it along.
I'm sorry to reply to an old thread but I've just recieved a hannspad sn10t1 which I believe has similar if not the same hardware as the GTab. I'm having the same issue with wifi connection, if I actually touch it to the router then I might get 3 bars! I definately cant leave the room and still be connected.
Have I got a faulty unit or is there a software or settings fix? By the sound of this its a hardware fault but I'd rather try and find a fix first.
htc-rocks said:
I'm sorry to reply to an old thread but I've just recieved a hannspad sn10t1 which I believe has similar if not the same hardware as the GTab. I'm having the same issue with wifi connection, if I actually touch it to the router then I might get 3 bars! I definately cant leave the room and still be connected.
Have I got a faulty unit or is there a software or settings fix? By the sound of this its a hardware fault but I'd rather try and find a fix first.
Click to expand...
Click to collapse
Most definitely a hardware issue. It sound like your antenna is not even connected at all. I would contact the manufacture for a RMA. If not crack it open and find the antenna
A few days ago i got my Lumia 920, and pretty soon i discovered a networking problem. When i am connected to my homenetwork, the people hub refuses to update facebook-streams. Sometimes it does, but most of the times its just "looking for updates". I have this problem only when i'm home. When connected to the wireless network at work, it works just fine - it's fast and updates every time.
I guess there is some parameter on my router that the phone does not like, but i dont have any clue what it could be. I'm running the newest firmware, no security is enabled. The problem is on both 2,4 ghz and 5 ghz.
I run "dhcp-reservations" so the phone gets the same ip every time - i also tried without reserving a specific ip to the phone. It has no effect on my problem.
I tried to enable the log, but the log is not very informative - its just telling what IP-adresses its trying to access.
This is the first device i have that is having a problem with my router. I have had three windows phone devices before, i have had iphone and one android phone, and of course laptops. I have never experienced this problem.
Would be very thankful for help solving this. I am not skilful enough to figure out what could be the problem. It works like a charm "everywhere" except when i'm home - so it must be my router that it does not like.
920 and WRT610n
I have a 920 and a wrt610n as well. A while back, I reflashed the firmware on my router with a third party open source product from dd-wrt.com. The firmware provides a lot more options for the router, and may help with your issue. I used the "mega generic" version of the firmware. Follow the setup carefully and let me know if you have and issues. :fingers-crossed:
I have exactly the same problem with WRT610n! Hope there's somebody can provide a solution...
Sorry to bring it to u guys, but some particular brands do not "like" each other. For instance, D-Link has an issue with iPhones and iPads, now this has issues with Lumias...
Possibly some reflashing of the router might get the things done, I cannot tell. I have a WR240G - and it works perfectly with every device, except for iPhone5 (in order to work with it, all security must be shut down)
Hi all,
I recently purchased the archos 80 titanium and have found the WiFi seems to be terrible regarding signal strength and also download speeds when connected to a network, I downloaded the new upgrade that was suggested when I first started the device but this seems to of done nothing, does anyone else have this issue or know of any possible solutions to rectify the issue? I've emailed there tech support but I can imagine there response to the issue when I get 1 that is, that it will be an error at my end and not there's!
Sent from my ARCHOS 80 TITANIUM using Tapatalk 2
I have the same issue (seems to be a known issue looking online) but it seems to be better or worse depending on the access point I use.
I have a Plusnet router at home and it was pretty bad with that but I plugged in a D-Link access point in another room and it seems to like that better. When I'm at work I use a Meraki and works well with that too.
I think it seems to be very fussy with access points. I hope they do release an update for the WiFi drivers or something to give it some extra juice!
It's a shame really as the tablet does actually have the potential to be good, I've come to realise that I don't think it's really a software/firmware issue I just think the WiFi receiver's that are in the tablet are of a poor quality but then again I could be wrong just wish they would release some information of a new firmware and what there suggesting the new firmware would be updating to see if there ever planning on addressing the issue.
Sent Using Tapatalk 2
I'm going to buy it, is this still a problem after the new update?
thanks a lot!
Hi! I bought HU for my bmw e46 and unfortunately my excitement about it soured a bit, when I realised that my wifi wouldn't turn on at all... I wasn't worried that much because I was gonna use 3g huawei modem anyway to have independent internet for the unit. Unfortunately it doesn't work either, because by instructions you need to turn wifi on as well... I had impression that it was software issue and tried looking for solution. I came across PPP widget, but as there is no way to get connection I cannot access play store and install through apk doesn't work. I then decided to give it malaysk rom with hope that this would solve my Issue, but it didn't. Its all the same. This must be a hardware issue with wifi adapter by my assumptions, but why dongle is not working when it has nothing to do with wifi? Does anyone know how to get 3g working? I just want my 3g and I dont think I'll need wifi that much. Also does anyone have stock 5.1.1 rom for eonon? I tried backing up, but it went wrong and I cannot reverse it in case Id need to send it back. Thanks for help in advance!
hello guys, i got here a Blackview BV4900 with a probelm of wifi and bluetooth. I think the chipset is damaged but not sure, it says unavailable mac adress and ip for both wifi and bluetooth
Tried reseting wifi and nothing also i tried Factory rest and the same problem keep showing that Bluetooth does´t responding. is there any soultion or as i said in the first Chipset is gone. Hope ypu help and share and idea if you have (The phone is for work and probably everyday a diffrent human working with, cause there is more than 200 to scan some QR codes and i think someone droped it) thx in advanced
Maybe the antenna inside the phone detached from the fall. I don't know the construction of this phone. Just an idea. Does the GPS work in airplane mode?
ze7zez said:
Maybe the antenna inside the phone detached from the fall. I don't know the construction of this phone. Just an idea. Does the GPS work in airplane mode?
Click to expand...
Click to collapse
Maybe i will open it and see wht i can do