Related
Up until today, I've been rooted. Used the SuperOneClick program. It was a piece of cake.
Today, I decide to check for new software updates..Two new ones.
I updated them and now I'm running 2.2.2 and ed05. Well I'm assuming that's the problem.
Because I've been going through the process today of backing up my ROM and stuff, to flash MIUI for the first time. Well, nothing seemed to work.
I tried to backup my current ROM, but nothing happened. (Should've rebooted and come back on, like normal after 'backup current ROM' was selected and a name was entered for it; Didn't happen. )
So I figured that the new software updates unrooted my phone.
So I go back into SOC and root my phone again, but during the process, it tells me that I'm already rooted. Finishes the process and I reboot my phone, etc.
Well the Superuser app is in my list now, but none of the root-required apps are working. They all tell me that I'm not rooted. I even used Root Check to see the status. It tells me as well, that I'm not rooted.
I go back to the SOC program and UNroot. Well that was successful. I reboot, etc.
No Superuser app. So far so good. So I go BACK again and root, everything went well, except when it said an 'su' command was sent to my phone, I never got one, but I still got the Superuser app. And still, the apps tell me I'm not rooted.
Any kind of help is great. I really appreciate all the time, spent reading this.
Sorry if I went on and on, but it's bugging me now and I really need some answers to what the problem might be. Thanks, guys. ;(
superoneclick does not work on ed05
you need to odin cwm recovery
then reboot into recovery using three finger method
install root.zip file
then reboot
directions for rooting with odin is here:
http://www.galaxyforums.net/forum/fascinate-rs-guides/1967-how-root-froyo-gingerbread-your-fascinate.html
SOC does work with ED05.. I've used it several times, different phones.
Really? I thought quite a few folks were having trouble with soc after the ota ed05 update? If thats the case, then thanks for the clarification... although odin is still another option for the op since soc is not working.
droidstyle said:
superoneclick does not work on ed05
you need to odin cwm recovery
then reboot into recovery using three finger method
install root.zip file
then reboot
directions for rooting with odin is here:
http://www.galaxyforums.net/forum/fascinate-rs-guides/1967-how-root-froyo-gingerbread-your-fascinate.html
Click to expand...
Click to collapse
I read most of the first page on that thread, mostly just read the latest replies about that method. I'll read the full directional tutorial once I'm clarified of questions.
I think I read a couple of users saying this does root your phone, but it will wipe all data as well? I'm not quite sure. I want my phone rooted, no matter if I install MIUI or not. I don't want a factory reset though.
Thanks droidstyle, I'm back to being rooted!
Now onward to flashing MIUI! Wish me luck.
:^)
Can someone give me step by step how to remove all and any traces of root and being unlocked/and CWM installed? I used RSD Lite to flash 1FF-sunfire-user-2.3.4-4.5.1A-1_SUN-198_7-CM-release-keys-signed-Sprint-US.sbf over, but ive heard there are still traces and cant find how to remove them. I used pudding for unlock, CWM for recovery, and initial root i used torpedo, then the built into "system.img" one after unlock. Im going to Sprint first thing in the morning tomorrow, so the faster the response the better. THANKS!
You can do a factory reset and wipe every thing. But really what you have done is enough.
Sent from my MB855 using Tapatalk
Well, you SBF'd it and they really wont look that much into it. I bricked my old samsung moment trying to find a root method told them it just went out, and got a replacement.
tl;dr just take it back as is. you should be fine.
Sprint services rooted phones (this was even on the xda news portal) so why do you need to return it to stock?
Wow really Sprint will actually not say anything or care if you give them an unlocked/rooted phone? I didnt know that! I just sbf'd and used recovery to wipe and hoped it cleared all that i needed. Thanks guys!
I would also like to know how to do this as I'm trying to install cm7 on my phone but the one click root method I used apparently will not work with the unlocked device. I followed the guide I found by qbking and flashed the stock sbf file with rsd lite, however my device remained unlocked. Is there something I'm missing? I double checked the video and I followed all of the steps he mentioned but I can't seem to re-lock and unroot my device.
You may want to try searching for "nopudding4u.sbf" I got the file somehow a while back and it supposedly removes the pudding unlock, however i have NOT tried it and im not exactly sure how to use it(id assume just flash it..? but i have no idea)
Hey, there seems to be a few of us(or maybe it's just me) confused about how we can root after the new update.
I just wanted to know if there was a confirmed safe way to restore root.
Thanks
Update:
Thanks to superkev. Manual way works. I can also confirm it also.
Also remember to keep your phone awake (ie. not in the locked screen)
superkev said:
I tried the manual instructions from here: http://briefmobile.com/motorola-atrix-4g-root
Step 6 failed for me, possibly because I had used this method to root 2.3.4. The rest of it went perfectly. I think the 2.3.6 update changed the permissions of the su binary, so these instructions just reset that to what they're supposed to be. I am rooted again!
Click to expand...
Click to collapse
I can't seem to find any root information on bell atrix 2.3.6 either.
saw some unconfirmed reports that superoneclick worked, but it doesn't work for me just sits at "Failed to set prot mask"
and then "WaitforDevice" forever...
if anyone has legit root info for the bell atrix 2.3.6 posting it would be greatly appreciated.
All I want is to install it! But im in usa so I need someone to make a fruitcake of it for me. Oh and I have also read super one click is supposedly working for some.
Sent from my MB860 using Tapatalk
I've got super one click working but superuser keeps denying all my root permissions without giving me a prompt.
DANGER!
So I tried SuperOneClick 2.3.1 and got my Bell Atrix 2.3.6 rooted.... all seemed good and Root Checker told me I was rooted. Light Flow got Super User permission and I thought I was gold!
Then my phone started freezing up and rebooting. Now I can't use the phone because it is crashing every 30 seconds. I would say avoid SuperOneClick (at least this version) for now!!
Oh, and SuperOneClick won't unroot my device so I'm kind of stuck. I would rather not reset my device and have to reinstall all my apps (which are backed up with Titanium Back-up, but which of course needs root to work...).
I'm just trying GingerBreak to unroot so we'll see how that goes.....
---------- Post added at 02:51 AM ---------- Previous post was at 02:44 AM ----------
... OK... so GingerBreak unrooted my phone but it is still completely hooped and the crashing woes continue... anyone with a solution on which system files I might be able to replace to fix this?!?!?
Aaaarrrg!
I tried wit Pete's first and it failed but super one click worked right from the first attempt. Before doing that though, I did a factory reset and started from scratch. Then I restored my apps only with TB. All is OK except that in market my apps list is empty with a message saying that my purchased apps will appear here. I have read that it is a known problem, but not necessarily with this update or because of rooting. In my experience super one click has otherwise been OK. Hope that helps. Don't have a solution for you except maybe trying to do a factory reset first if you are able to and then try again.
Sent from my MB860 using xda premium
Hey thanks. Yes, I ended up having to do a reset from the boot menu (power+vol down) and do an 'Android Recovery' which apparently wipes the system files and reinstalls the OS. My TB backups are still sitting on the internal SD but I am hesitant to re-root so I can reinstall TB and restore... what build of SuperOneClick did you use?
I tried with SuperOneClick 2.3.1.0 (latest). It says that it worked, but even after rebooting, my apps are being denied root access.
UPDATE:
I tried the manual instructions from here: http://briefmobile.com/motorola-atrix-4g-root
Step 6 failed for me, possibly because I had used this method to root 2.3.4. The rest of it went perfectly. I think the 2.3.6 update changed the permissions of the su binary, so these instructions just reset that to what they're supposed to be. I am rooted again!
I just updated to 2.3.6 and used the Briefmobile method to root and can also confirm that it is working. I had previously used this method to do 2.3.4 and had no issues on 2.3.6. Cheers
I might caution those who are not on AT&T about using the "manual" root method from BriefMobile. It was built with AT&T 2.3.4 files. Flashing the root.img in fastboot flashes those files to your /preinstall folder possibly hosing your Bell specific files. This has in the past, and possibly could in the future cause issues when trying to install future updates.
For those of you who have done it, can you look in /preinstall/md5 and see if you have att files?
Sent via 2.3.4 Rooted/Unlocked Moto Atrix using Tapatalk
superoneclick 2.3.1.0
this works flawlessly and on first attempt. so easy!
gingerbreak 1.2 didn't work this time, but it was useful to me for unrooting.
just make sure you do that before installing the update, and follow the superoneclick instructions.
too early to comment on battery life, and other than the keyboard I don't notice any aesthetic changes.
bell atrix
Remember to flash back the original preinstall image to avoid update issues.
Cheers!
das8nt said:
For those of you who have done it, can you look in /preinstall/md5 and see if you have att files?
Click to expand...
Click to collapse
That directory does contain some ATT and Cingular files. However, I used this method to root 2.3.4 and it didn't prevent me from installing the 2.3.6 update. I'm hoping I won't have any trouble going to ICS (fingers crossed that such a thing will even happen!)
superkev said:
That directory does contain some ATT and Cingular files. However, I used this method to root 2.3.4 and it didn't prevent me from installing the 2.3.6 update. I'm hoping I won't have any trouble going to ICS (fingers crossed that such a thing will even happen!)
Click to expand...
Click to collapse
Good deal. I had to help a few revert that folder when updating from 2.2.2 to 2.3.4 due to missing the gameloft stuff, but if it didn't effect your update that's good news.
Just in case, here's the 2.3.6 Bell stock preinstall.img to flash via moto-fastboot (thanks to NFHimself's new Gobstopper): http://www.megaupload.com/?d=C098P9IV
Sent via 2.3.4 Rooted/Unlocked Moto Atrix using Tapatalk
I used the manual way to root with the 2.3.6 update but TB is saying it can't can't gain root access and su keeps fc'ing on me. Anyone have any ideas what could be causing this? I also tried the superone click method but during the exe install on my pc it keeps stopping saying i don't have an internet connection????
j7logan said:
I also tried the superone click method but during the exe install on my pc it keeps stopping saying i don't have an internet connection????
Click to expand...
Click to collapse
that's weird. you definitely don't need internet access to perform the root (i was offline), provided you have superoneclick and phone drivers installed i'd say. does the driver check feature complain about it too?
Yeah, i thought it was strange too. It doesn't give me that error with the driver check, only when it is going through the install process of the exe.
Sometimes you need to treat your phone like a computer when it starts acting weird, save yourself some hassle and just do a format/factory reset and start fresh.
i used Doomlord's Rooting Toolkit: http://forum.xda-developers.com/show....php?t=1319653 it worked in 30 sec
Link to the exact Superoneclick you used? I tried the Doomloader link but it's broken.
Ok, I know there are a lot of posts already on updating to 2.3.6 and root, but there appears to be a lot of different situations and limited information that is causing me some confusion.
So, what I want to do is get some clear details about probably the second most common situation: A Motorola Atrix 4G running the stock ROM with root access and an unlocked bootloader.
With regards to updating, aside from the obvious actions (i.e. TiBu, maybe a Nandroid), is there anything else that needs to be done to perform the update?
Additionally, I would like to keep root/unlocked even with the update, but I am willing to re-do root after the update. I can't find clear information on what methods work to keep root or to restore root after updating.
That is pretty much all that I am trying to do. I can not afford to brick my phone, so I want to make sure that I understand everything before I update.
P.S. Curse Motorola and it's stupid locked bootloaders!
I'm in the same shoes and looking to do the same thing...I want to keep root, not brick my phone...Apply the 141 update. I don't mind a little work (re-root, re-modify some files)
I'm running an unlocked bootloader, AT&T Atrix with 4.5.91 which is rooted with some custom changes (tethering, 2g/3g toggle, unlock APNs, agps)
Seems it could be possible to rebuild Blur_Version_91.4.5.141.MB860ATT.en.US available from Motorola and exclude the bootloader portions to keep the phone from bricking?
psychephylax said:
I'm in the same shoes and looking to do the same thing...I want to keep root, not brick my phone...Apply the 141 update. I don't mind a little work (re-root, re-modify some files)
I'm running an unlocked bootloader, AT&T Atrix with 4.5.91 which is rooted with some custom changes (tethering, 2g/3g toggle, unlock APNs, agps)
Click to expand...
Click to collapse
Yeah, I used the script that applied the tethering/hotspot tweak. That's about it. I haven't had to use any agps or anything, it's got amazing gps as it is.
Glad I'm not the only one though
If you have a stock rom unlocked bootloader with root don't do the ota update.I just soft bricked my phone.
Sadly, I did just that. I just wasn't paying attention.
Update: resorted to a factory reset. Now I have 2.3.6 running. Just going to take some time to restore my apps and settings.
Looks like I'm in the same boat. What's the best way to recover from a soft-brick in this situation?
thatguy193 said:
If you have a stock rom unlocked bootloader with root don't do the ota update.I just soft bricked my phone.
Click to expand...
Click to collapse
Yeah, this is exactly why I have asked. I read at least one post somewhere where someone tried both the SD Card and the OTA update and the SD didn't work, but the 2nd OTA try did. I don't know if they said they had unlocked or not.
Johnston212 said:
Yeah, this is exactly why I have asked. I read at least one post somewhere where someone tried both the SD Card and the OTA update and the SD didn't work, but the 2nd OTA try did. I don't know if they said they had unlocked or not.
Click to expand...
Click to collapse
Well I found this threadhttp://forum.xda-developers.com/showthread.php?t=1498856 was trying the auto updater as suggested but my phone wont stay on long enough for it to work.It does the auto shutdown and tries re-installing the OTA update which gives me the android triangle guy.
I recently made an update of my Atrix 4G's System from 2.3.4 to 2.3.6.
My 2.3.4 version was unlocked and rooted. It is on ATT.
Initially I received a notification in my phone about the new System update available. I tried three times OTA, but each time the process failed. When it was booting up always gave me the Android Icon with an Exclamation mark inside of a triangle. But nothing else happens. My phone continued working but with the 2.3.4 version.
Then I went to this page:
Because I haven't less than 8 post in this site I can't post any URL.
But, go for the "Motorola software update" in the Motorola's web page or Google it and get it.
And installed the "Motorola Software update" application. I had to restart my PC in order to make the software to recognize and connect to my Atrix 4G. When the Atrix was connected, by USB port, I had to select the "Windows media Sync" in the USB connection options list to make the connection to work.
Then, all that I had to do was wait until the process got completed.
I hadn't see nothing different with the new update.
I conserved my "unlocked" condition but I lost my "Rooted" condition. But that is not a big issue, there are several thread in the web that help you to get rooted again.
Hope this can help, It works for me.
cjfermin said:
I conserved my "unlocked" condition but I lost my "Rooted" condition. But that is not a big issue, there are several thread in the web that help you to get rooted again.
Hope this can help, It works for me.
Click to expand...
Click to collapse
You have an unlocked bootloader? Or sim-unlocked phone?
I'm in the same situation of @cjfermin and the 2.3.6 was flashed without any problem.
Of course I've lost ROOT, but I've followed simple instructions on the web (using Fasboot) and I've re-rooted the Atrix in 3 minutes.
PS: my Atrix was/is sim-unlocked and with unlocked bootloader.
emandt said:
I'm in the same situation of @cjfermin and the 2.3.6 was flashed without any problem.
Of course I've lost ROOT, but I've followed simple instructions on the web (using Fasboot) and I've re-rooted the Atrix in 3 minutes.
PS: my Atrix was/is sim-unlocked and with unlocked bootloader.
Click to expand...
Click to collapse
Thanks, that is exactly what I was needing to find out. I've heard yes and no's on different re-rooting methods. Could you link the one that you used? I was thinking about using Gingerbreak or OneClickRoot
I was trying to apply the OTA 4.5.141, on my rooted AT&T Motorola Atrix stock rom 2.3.4 and after the first reboot, following the instructions from the update, I am getting the message “failed to boot 2 starting rds mode” and just sit there. After removing the battery and booting up again, the phone seems to booting up normally and then when the phone finishes loading most of the widgets, I get a message saying “turning off” and the same cycle keeps repeating.
This is my primary phone and I am really desperate right now and I do not know what to do.
Please I need some help,
Johnston212 said:
Could you link the one that you used?
Click to expand...
Click to collapse
Here: http://www.android-advice.com/2012/root-the-motorola-atrix-4g-running-4-5-141/
Hope that helps you!
Alverik said:
I was trying to apply the OTA 4.5.141, on my rooted AT&T Motorola Atrix stock rom 2.3.4 and after the first reboot, following the instructions from the update, I am getting the message “failed to boot 2 starting rds mode” and just sit there. After removing the battery and booting up again, the phone seems to booting up normally and then when the phone finishes loading most of the widgets, I get a message saying “turning off” and the same cycle keeps repeating.
This is my primary phone and I am really desperate right now and I do not know what to do.
Please I need some help,
Click to expand...
Click to collapse
Ok, is your bootloader unlocked as well? I googled the "failed to boot 2 starting RSD mode" that you mentioned and there are a number of posts on it from over the years. It seems that you may need to flash a SBF file, but I don't know enough about your situation to competently tell you more than that.
Johnston212 said:
Ok, is your bootloader unlocked as well? I googled the "failed to boot 2 starting RSD mode" that you mentioned and there are a number of posts on it from over the years. It seems that you may need to flash a SBF file, but I don't know enough about your situation to competently tell you more than that.
Click to expand...
Click to collapse
I am on stock rom 2.3.4 and have only rooted my phone nothing else. It seems that because it was a rooted phone the update could not finish the process.
Now I don’t know what to do.
Should I try to flash to 2.3.4 using RDS lite and then update using OTA 4.5.141 or flash using 4.5.141 (I don’t know where to find it)?
Help please, this is my only phone.
Alverik said:
I am on stock rom 2.3.4 and have only rooted my phone nothing else. It seems that because it was a rooted phone the update could not finish the process.
Now I don’t know what to do.
Should I try to flash to 2.3.4 using RDS lite and then update using OTA 4.5.141 or flash using 4.5.141 (I don’t know where to find it)?
Help please, this is my only phone.
Click to expand...
Click to collapse
If the only thing you've ever done to the phone is root then flashing the official 2.3.4 (not fruitcake) with RSDlite and then applying the 141 OTA update should be ok. Things to note:
1) Make sure the phone is fully charged
2) Apply the 141 OTA update from sd card. Go to motorola's website . I've had mixed results when applying previous updates when downloading over wifi.
3) Be VERY sure you've done nothing else to your phone other than root, i.e. unlock, mess with the bootloader and/or recovery (unlock, ROMs).
gnahc79 said:
If the only thing you've ever done to the phone is root then flashing the official 2.3.4 (not fruitcake) with RSDlite and then applying the 141 OTA update should be ok. Things to note:
1) Make sure the phone is fully charged
2) Apply the 141 OTA update from sd card. Go to motorola's website . I've had mixed results when applying previous updates when downloading over wifi.
3) Be VERY sure you've done nothing else to your phone other than root, i.e. unlock, mess with the bootloader and/or recovery (unlock, ROMs).
Click to expand...
Click to collapse
The only thing that I have done other than rooting my phone it’s unlocking the sim card.
I don't have a SIM unlocked phone, so I can't with 100% certainty say you will be ok. You should be fine though. Maybe others with SIM unlocked phones will chime in.
gnahc79 said:
I don't have a SIM unlocked phone, so I can't with 100% certainty say you will be ok. You should be fine though. Maybe others with SIM unlocked phones will chime in.
Click to expand...
Click to collapse
I am not able to copy the update file to the SD card because I get a message saying “turning off” a little bit after the phone loads the sd card and then I get the "failed to boot 2 starting RSD mode" and after that the only way to take it out of that mode, it’s by removing the battery.
What options do I have now?
Thank you,
Hello all! I hope this is the right thread.
Today, I learned about a method to root my Droid Turbo. I learned about the initroot exploit that gives you temproot so you can use sunshine to permanently enable the root. Unfortunately, I have no idea what I'm doing or why I did this without studying completely. I thought because I had a bit of root experience that this would be easy beans. Well, no. It's stuck on the screen that says "Warning, bootloader unlocked" and it keeps rebooting in a loop.
I've gone through the process of setting up RSDlite, mfastboot, adb, the works. The issue I'm encountering is that I'm unable to factory reset the device, wipe anything at all, flash TWRP so I can attempt to flash anything else on it, and it's not letting me flash any kind of bootloader onto it. I've tried flashing the stock firmware back on it but it won't work.
I have no idea how to fix my phone and I really need it. Can anyone help me?