Hi
noticing today that my camera quick start didnt work, i was wondering if anyone has had this issue before?
i have a blue S3, rooted and i cannot say that i noticed this before.
Once i go to calibrate i get this message: Unable to find Offset file. Try again
anyone knows what that means? i dont know where to look and what files are those. Do i need to reflash? I have a second S3 which i could copy a file if mine are corrupt...
thanks
vas
I'm hoping this is a software issue. Reflashing stock firmware didn't fix it. But if it was a hardware issue, would I be getting a message?
Don't think this is a hardware issue definately looks like the 4.2.1 update broke something with the camara gyroscope open feature. I didn't get the error message you are seeing however my GS3 worked with the feature on the 4.1.1 version FW most likely Samsung just missed this in trying to get the 4.2 update out before the end of the year.
But I'm only on stock kernel and 4.1.2 at the moment.!
Anyone?
wipe phone flash older firmware and test .
jje
So you mean hard reset and flash with 4.1.1 ?
How come my other s3 didn't have this issue?
Has this come up again on 4.1.2 ?
vasp3690 said:
So you mean hard reset and flash with 4.1.1 ?
>>> YES
How come my other s3 didn't have this issue?
>> Not a Clue / poor firmware update .
Has this come up again on 4.1.2 ?
>> Yours is the only post .
jje
Click to expand...
Click to collapse
JJEgan said:
vasp3690 said:
So you mean hard reset and flash with 4.1.1 ?
>>> YES
How come my other s3 didn't have this issue?
>> Not a Clue / poor firmware update .
Has this come up again on 4.1.2 ?
>> Yours is the only post .
jje
Click to expand...
Click to collapse
That's why I'm asking. What's the point going back to 4.1.1? If this was more common on 4.1.2 then others would/should have similar problems.
I did a hard reset on 4.1.2 and same thing again.
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
Check if your gyroscope is still recognized by the phone: dial *#0*#->Sensor and play with the gyroscope tests.
If the folder /sys/bus/i2c/drivers/lsm330dlc_gyro is not present on your phone, then I would guess that the kernel isn't picking up your gyroscope.
Is there a way to replace that folder?
Like from a copy paste or push feature?
JJEgan said:
vasp3690 said:
So you mean hard reset and flash with 4.1.1 ?
>>> YES
How come my other s3 didn't have this issue?
>> Not a Clue / poor firmware update .
Has this come up again on 4.1.2 ?
>> Yours is the only post .
jje
Click to expand...
Click to collapse
I have the same issue and it was working 2 hours ago any solutions please ?
---------- Post added at 09:57 PM ---------- Previous post was at 09:36 PM ----------
vasp3690 said:
Hi
noticing today that my camera quick start didnt work, i was wondering if anyone has had this issue before?
i have a blue S3, rooted and i cannot say that i noticed this before.
Once i go to calibrate i get this message: Unable to find Offset file. Try again
anyone knows what that means? i dont know where to look and what files are those. Do i need to reflash? I have a second S3 which i could copy a file if mine are corrupt...
thanks
vas
Click to expand...
Click to collapse
Do a full wipe re-install rom and it should work fine, it did at least for me.
Click to expand...
Click to collapse
Robbycop said:
JJEgan said:
I have the same issue and it was working 2 hours ago any solutions please ?
---------- Post added at 09:57 PM ---------- Previous post was at 09:36 PM ----------
Do a full wipe re-install rom and it should work fine, it did at least for me.
Click to expand...
Click to collapse
Full wipe and reinstall:
Does that mean, Odin or mobile odin, stock firmware and kernel as before, then hard reset ? Or something else?
In the above order or different?
Click to expand...
Click to collapse
vasp3690 said:
Robbycop said:
Full wipe and reinstall:
Does that mean, Odin or mobile odin, stock firmware and kernel as before, then hard reset ? Or something else?
In the above order or different?
Click to expand...
Click to collapse
Full wipe and flash stock firmware
Click to expand...
Click to collapse
Ok. Done that. Didn't work for me
then it's hardware
Related
I was on Samsung GT-I9100 / I9100XXK14 / 2.635.7-I9100XXK14 before rooting and flashing custom roms. On 2nd flash I lost all sms and call logs (nothing else) while using Titanium Backup Pro. I also had backed up in Kies. But found out I can't restore from Kies becuz it doesn't recognize custom rom. Purchased TB after I lost original XXK14 firmware due to a botched backup on my part. Can anyone help me get back to my XXK14 firmware temorarily so I cans restore sms and call logs?
tlmacson said:
I was on Samsung GT-I9100 / I9100XXK14 / 2.635.7-I9100XXK14 before rooting and flashing custom roms. On 2nd flash I lost all sms and call logs (nothing else) while using Titanium Backup Pro. I also had backed up in Kies. But found out I can't restore from Kies becuz it doesn't recognize custom rom. Purchased TB after I lost original XXK14 firmware due to a botched backup on my part. Can anyone help me get back to my XXK14 firmware temorarily so I cans restore sms and call logs?
Click to expand...
Click to collapse
I am in the same boat. I am running westcrip ics remix. I find it little buggy I want to return to my stock, but haven't found solution yet. I tried to look for stock rom ....couldn't find it.
Sent from my GT-I9100 using xda premium.
Hey search the forums lots of helpful threads to use odin to flash back a stock rom.
Heres a link to a specific stock rom, KI4 is in the list.
http://forum.xda-developers.com/showthread.php?t=1075278
Also for help with random questions and using ODIN to flash.
http://forum.xda-developers.com/showthread.php?t=1125282
Saw this link earlier but the XXK14 download link is broken and I'm not knowledgable as to what other stock roms I can use here in the U.S. on AT&T (not sure that carrier is an issue other than the fact ATT is GSM / HSPA+ 21 Mbps). I'd really appreciate directions to an alternate XXK14 link and/or another compatible GB 2.3.5 stock firmware.
Search Samfirmware.com
tlmacson said:
Saw this link earlier but the XXK14 download link is broken and I'm not knowledgable as to what other stock roms I can use here in the U.S. on AT&T (not sure that carrier is an issue other than the fact ATT is GSM / HSPA+ 21 Mbps). I'd really appreciate directions to an alternate XXK14 link and/or another compatible GB 2.3.5 stock firmware.
Click to expand...
Click to collapse
I did it. Back to stock 2.3.6 unrooted all good.
Sent from my GT-I9100 using xda premium
rdhalla said:
I did it. Back to stock 2.3.6 unrooted all good.
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
Can you supply a link please, as this is the 1 I am looking for? Thanks in Advance.
chunderman said:
Can you supply a link please, as this is the 1 I am looking for? Thanks in Advance.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?p=23561521#post23561521
What continent do you live in, I need this in order to display the correct firmware downloads for your area and ROM version.
Chris.
themadba said:
What continent do you live in, I need this in order to display the correct firmware downloads for your area and ROM version.
Chris.
Click to expand...
Click to collapse
Sorry, I live in the UK. Thanks in advance.
The USB port has gone and I want to return it during warranty.
---------- Post added at 01:04 AM ---------- Previous post was at 12:56 AM ----------
ctomgee said:
http://forum.xda-developers.com/showthread.php?p=23561521#post23561521
Click to expand...
Click to collapse
Thats this thread?
Sure ! Lemme get back home and ill post with all the required links.
Sent from my GT-I9100 using xda premium
chunderman said:
Thats this thread?
Click to expand...
Click to collapse
Specifically to the post that said to search on samfirmware.com.
ctomgee said:
Specifically to the post that said to search on samfirmware.com.
Click to expand...
Click to collapse
I've checked and can't see anything there. Thanks.
Alternatively use Check Fus, Google it.
Sent from my GT-I9100 using xda premium
Here is what you need to do
1. Get Check FUS downloader: LINK
2. Run FUS Select you Carrier / Region / Model and Download the Stock firmware for your phone.
3. Backup anything you need. You will need to wipe the data and the cache from Recovery mode before you flash the downloaded Fware..
4. Use ODIN and Flash the Downloaded Stock Firmware to your phone. You will loose the root access and you should have your stock back. Yeah before Install Wipe data and cache.
Lemme know if that works. If any doubt... just ask. Dont do anything wrong i'll try to help if i know the answer.
chunderman said:
I've checked and can't see anything there. Thanks.
Click to expand...
Click to collapse
Did you try the "firmwares" link??
I have concerns about you flashing your phone if you can't navigate a website... No offense. I'm not trying to be insulting, but it's really easy to find.
Hi guys,
I'm a newbie so please bare with me. I have a Virgin Mobile UK Samsung Galaxy S2 which was on Gingerbread 2.3.4 or 5. I foolishly flashed it yesterday to yes you guessed it, ICS 4.0.3. Now as far as the phone itself is concerned, everything is working pefectly fine. No issues whatsoever except now I've noticed that my carrier has changed to T-Mobile UK even though the phone has full functionality on the Virgin network still? Also I get the "This device cannot download firmware" message now when connected to Kies.
Have I totally ruined my phones chances of downloading any official firmware in the furture now? And how can I correct the display of my carrier? I'm guessing I will have to find a stock ROM from somewhere and re-install. But doesn't that do something to a ROM install counter someware on the phone?
Thank you in advance.
E-Nigma said:
Hi guys,
I'm a newbie so please bare with me. I have a Virgin Mobile UK Samsung Galaxy S2 which was on Gingerbread 2.3.4 or 5. I foolishly flashed it yesterday to yes you guessed it, ICS 4.0.3. Now as far as the phone itself is concerned, everything is working pefectly fine. No issues whatsoever except now I've noticed that my carrier has changed to T-Mobile UK even though the phone has full functionality on the Virgin network still? Also I get the "This device cannot download firmware" message now when connected to Kies.
Have I totally ruined my phones chances of downloading any official firmware in the furture now? And how can I correct the display of my carrier? I'm guessing I will have to find a stock ROM from somewhere and re-install. But doesn't that do something to a ROM install counter someware on the phone?
Thank you in advance.
Click to expand...
Click to collapse
You are fine. Nothing has gone wrong. Use the FUS and get the stock firmware for you phone. Flash it via ODIN... Read the above few posts.
For your Flash counter and Bin counter, You can reset it back to zero. Look for Triangle.apk . TO use that you need to have a rooted device. Super user permissions... so run Triangle while you have rooted device? If not then root it to reset the bin or flash counter ( If you want) or just flash back the stock Fware..
No you havent ruined you phone. You can download all official firmwares. Just wait for the offical ICS for your region.
Hi,
Thanks for the quick reply. So just to clarify... If I re-install the stock firmware there will be no need to root the device and install the program that resets the counters?
Also, I've noticed that Virgin Mobile UK isn't listed under my territory?
Thanks again.
E-Nigma said:
Hi,
Thanks for the quick reply. So just to clarify... If I re-install the stock firmware there will be no need to root the device and install the program that resets the counters?
Also, I've noticed that Virgin Mobile UK isn't listed under my territory?
Thanks again.
Click to expand...
Click to collapse
From memory the only CSC that has Virgin UK is the CPW one Carphone Warehouse . Flash that or enter network settings manually .
jje
So the thing is I'm using ROOTBOX ICS rom, and because I'm willing to gift my phone to a cousin I did a Factory Reset, then my phone turn off and when it tries to wake up, after Samsung logo, it makes like a blink on the screen... every 3 seconds.
I can't enter CWM Recovery using VolUp+Menu+Power, however I can enter Download Mode using VolDown+Menu+Power.
So guys, give me a solution here please.
Thank you so much.
alainalemany said:
So the thing is I'm using ROOTBOX ICS rom, and because I'm willing to gift my phone to a cousin I did a Factory Reset, then my phone turn off and when it tries to wake up, after Samsung logo, it makes like a blink on the screen... every 3 seconds.
I can't enter CWM Recovery using VolUp+Menu+Power, however I can enter Download Mode using VolDown+Menu+Power.
So guys, give me a solution here please.
Thank you so much.
Click to expand...
Click to collapse
Go to www.sammobile.com and download a stock firmware for your device and flash through odin.
kilometers4 said:
Go to www.sammobile.com and download a stock firmware for your device and flash through odin.
Click to expand...
Click to collapse
Thank you SO MUCH for your quick answer.
Correct me if I'm wrong. This post helps me? Check in ICS part, he advice to download a firmware (which I think is a stock one), then a kernel, and Odin.
Thanks again.
I've had that problem already. Check the thread link below and get the stock firmware for your device and flash it with Odin.
http://www.google.tt/url?sa=t&sourc...s4GAAw&usg=AFQjCNGy84IPLFxF4qAfKfMxdPjNS5m4-A
Sent from my GT-I9100 using Tapatalk 2
alainalemany said:
Thank you SO MUCH for your quick answer.
Correct me if I'm wrong. This post helps me? Check in ICS part, he advice to download a firmware (which I think is a stock one), then a kernel, and Odin.
Thanks again.
Click to expand...
Click to collapse
Yea looks good, just looked at it quickly and it seems right.
kilometers4 said:
Yea looks good, just looked at it quickly and it seems right.
Click to expand...
Click to collapse
OK thanks dude... downloading.
cannot flash with odin
I too have the same problem and can only boot into download mode, but odin doesn't detect my device. Help please, I can only boot into download or it will boot normally and be stuck on the boot logo. Any solutions anyone?
mark.r22 said:
I too have the same problem and can only boot into download mode, but odin doesn't detect my device. Help please, I can only boot into download or it will boot normally and be stuck on the boot logo. Any solutions anyone?
Click to expand...
Click to collapse
Make sure you have the drivers installed and Kies is completely closed (check task manager).
Sent from my GT-I9100 using xda premium
yes i closed kies via the task manager and checked that all drivers were installed
kilometers4 said:
Make sure you have the drivers installed and Kies is completely closed (check task manager).
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
I have a similar problem lik this ...is there any way to get the CWM back only ?? then i can flash another ROM .... i am not willing to flash Stock again ....is there any other way other than Flashing Stock ROM ???
help sgs2 no display
hi guys, anybody can give me info on what to do with my sgs2? after updating to ics 4.0.4 my phone was ok, then i turned it off and tried to turn it on again...suddenly there was no display but the lcd is getting hot. tried to boot in recovery and download mode but nothing happened. i already removed the battery since i'm worried the lcd is getting hotter...pls help on what to do, big tnx and more power!
yarzaea said:
hi guys, anybody can give me info on what to do with my sgs2? after updating to ics 4.0.4 my phone was ok, then i turned it off and tried to turn it on again...suddenly there was no display but the lcd is getting hot. tried to boot in recovery and download mode but nothing happened. i already removed the battery since i'm worried the lcd is getting hotter...pls help on what to do, big tnx and more power!
Click to expand...
Click to collapse
Listen read this unless you find your solution by youself
http://forum.xda-developers.com/showthread.php?t=1756242
Sent from my GT-I9100 using xda premium
---------- Post added at 12:23 AM ---------- Previous post was at 12:21 AM ----------
techno-np said:
I have a similar problem lik this ...is there any way to get the CWM back only ?? then i can flash another ROM .... i am not willing to flash Stock again ....is there any other way other than Flashing Stock ROM ???
Click to expand...
Click to collapse
Flash siyah 5.0.1. tar file via Odin.. U will get CWM.
Sent from my GT-I9100 using xda premium
techno-np said:
I have a similar problem lik this ...is there any way to get the CWM back only ?? then i can flash another ROM .... i am not willing to flash Stock again ....is there any other way other than Flashing Stock ROM ???
Click to expand...
Click to collapse
Flashing another kernel like siyah might help you.
Using GT - I9100
I thank those who give helpful comments
I expect the same from others.
techno-np said:
I have a similar problem lik this ...is there any way to get the CWM back only ?? then i can flash another ROM .... i am not willing to flash Stock again ....is there any other way other than Flashing Stock ROM ???
Click to expand...
Click to collapse
If you don't want to flash a stock ROM, root, and flash a custom ROM again, you can use one of odin flashable files for custom kernels, not all have one but you can check (Dorimanx for example)
xDa_nightfury said:
Listen read this unless you find your solution by youself
http://forum.xda-developers.com/showthread.php?t=1756242
Sent from my GT-I9100 using xda premium
---------- Post added at 12:23 AM ---------- Previous post was at 12:21 AM ----------
Flash siyah 5.0.1. tar file via Odin.. U will get CWM.
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
unfortunately, i have already bricked my s2 as confirmed from the warning thread...in anycase, is there anyway to recover my s2 and have it working again? i already tried a usb jig and it didn't do anything supposed to do, i am not sure if a jtag would work and if does, i don't know where to bring it, i am from the philippines and i couldn't find any decent repair shop that promotes jtag...hope to find a solution?
yarzaea said:
unfortunately, i have already bricked my s2 as confirmed from the warning thread...in anycase, is there anyway to recover my s2 and have it working again? i already tried a usb jig and it didn't do anything supposed to do, i am not sure if a jtag would work and if does, i don't know where to bring it, i am from the philippines and i couldn't find any decent repair shop that promotes jtag...hope to find a solution?
Click to expand...
Click to collapse
If the usb jig is not working then your only option is jtag or else motherboard replacement. Your best bet is to come clean to Samsung and hope that they give you a replacement
Sent from my GT-I9100
If I helped you, please hit the thanks button!
ramnex said:
If the usb jig is not working then your only option is jtag or else motherboard replacement. Your best bet is to come clean to Samsung and hope that they give you a replacement
Sent from my GT-I9100
If I helped you, please hit the thanks button!
Click to expand...
Click to collapse
i really wanted to try a jtag but dunno where in the philippines perform such procedure? tho, been thinking of bringing my s2 to samsung and have it estimated since it is no longer covered by warranty...but, this is the philippines, there are no such thing as coming in clean, they will try to bleed you for that precious sg2...tnx alot for your prompt reply and more power!
Hi, i am new to android and have a samsung galaxy s3, international, on 4.1.1
I flashed the 4.2 camera .zip onto my phone using mobile odin with success, but want rid of it as it is not fully functional. How can i remove it and the accompanying gallery app? Have tried multiple methods of normal app uninstall etc.
Sorry if this is a nooby post, have been searching for an answer and cant find one.
Adrian
Backup data and factory reset .
jje
JJEgan said:
Backup data and factory reset .
jje
Click to expand...
Click to collapse
thanks for the quick reply ill just hide it haha!! Thanks though, currently flashing on 4.1.2 hope it works ok!
Adrianvert said:
Hi, i am new to android and have a samsung galaxy s3, international, on 4.1.1
I flashed the 4.2 camera .zip onto my phone using mobile odin with success, but want rid of it as it is not fully functional. How can i remove it and the accompanying gallery app? Have tried multiple methods of normal app uninstall etc.
Sorry if this is a nooby post, have been searching for an answer and cant find one.
Adrian
Click to expand...
Click to collapse
Or you could find someone who could give you camera's 4.1.1 .zip and flash it.
P.T.J0hnnie said:
Or you could find someone who could give you camera's 4.1.1 .zip and flash it.
Click to expand...
Click to collapse
it didnt over write the old ones just added the new ones, turns out flashing 4.1.2 sorted it though so im happy, speaking of the new multi window thing.. very good!
Ok bro glad you like your new version
Sent from my GT-I9300 using xda app-developers app
my phone does not start up anymore after I installed one ROMs, how can I reset the phone? computer without the phone does not have any ROM
PLEASE HELP ME ANYBODY :crying:
phone
phone model is GT-I9100
hiqpocrates said:
my phone does not start up anymore after I installed one ROMs, how can I reset the phone? computer without the phone does not have any ROM
PLEASE HELP ME ANYBODY :crying:
Click to expand...
Click to collapse
Need a little more info. What rom were you on..and which one you tried to install?? What kind of phone, i'm thinking a Galaxy s2 but which version? What recovery are you using? How did you try to install ( what steps you did to install)?
---------- Post added at 08:25 PM ---------- Previous post was at 08:20 PM ----------
hiqpocrates said:
phone model is GT-I9100
Click to expand...
Click to collapse
Are you getting splash screen..boot animation?? Any lights? Can you get into download mode or recovery mode? You need to be a little more specific so someone can help you.
Service centre.
idc what rom i installed it 2 months ago and dont remember
Are you getting splash screen..boot animation?? Any lights? Can you get into download mode or recovery mode? You need to be a little more specific so someone can help you.
Click to expand...
Click to collapse
NOTHING? only if I give my phone on charge I can see the download icon
hiqpocrates said:
idc what rom i installed it 2 months ago and dont remember
Click to expand...
Click to collapse
First...take a sledge hammer and smash it! Second..get a new phone and leave it stock! If you would have read the stickies and understood them for your device..this might not have happened!
Pull battery out leave it for a bit. Did you flash and then it died? What did you do to it before it died?? What have you tried??
andrewwright said:
Pull battery out leave it for a bit. Did you flash and then it died? What did you do to it before it died?? What have you tried??
Click to expand...
Click to collapse
i tried install new rom? succesful installed and when reboot it died?
i only want know can i install new rom without phone start up
Probably not. Did you flash wrong zip for model.? Can at least try a jig before you sell it for parts.
Hey what state is the battery in.Remote possibility its something battery related.
And try to post more info and post in better english as its hard to decipher exactly what you are saying.
-------------------------------------------
maybe your an iphone expert
------------------------------------------
andrewwright said:
Probably not. Did you flash wrong zip for model.? Can at least try a jig before you sell it for parts.
Click to expand...
Click to collapse
how jig
Make it / buy it.
Sent from my GT-I9100 using xda app-developers app
When I install or update a new application, the application opens automatically. Can you help me
Back up your data , remove all accounts from your device and do Factory Reset.
Teddy Lo said:
Back up your data , remove all accounts from your device and do Factory Reset.
Click to expand...
Click to collapse
I've done it before, but it happened again. the third time it happened.no other solution
okankayci said:
I've done it before, but it happened again. the third time it happened.no other solution
Click to expand...
Click to collapse
Flash new firmware .
Teddy Lo said:
Flash new firmware .
Click to expand...
Click to collapse
I am using G6 tr. Bootloader lock does not open. I can not do it because of him. Why it might be
Maybe your current OS is like that or you have some bug on it , when I mean to flash I mean stock rom not custom rom , but mostly G series of LG phone has factory issue with mainboard it self . Look maybe something of this firmware can help you !
Warning ! Search for people over the forum who work more with LG phones to be sure you are on good way
https://www.techora.net/install-stock-firmware-on-lg-g6.html
---------- Post added at 08:14 PM ---------- Previous post was at 08:14 PM ----------
Maybe your current OS is like that or you have some bug on it , when I mean to flash I mean stock rom not custom rom , but mostly G series of LG phone has factory issue with mainboard it self . Look maybe something of this firmware can help you !
Warning ! Search for people over the forum who work more with LG phones to be sure you are on good way
https://www.techora.net/install-stock-firmware-on-lg-g6.html
Tr It's not even a version of. The problem is a loaded application but I could not find which one. With Greenify, it stopped right now