Hì Guys,
I'm a new member.
Yesterday, i've deleted all folders and files into "SD Card" folder, that, for ICS, it is the System folder (so don't the external SD).
Now, my PC can't read my device, the Camera isn't running, some settings are Force Closing, i can't install custom ROMs and i can't root my device.
How can i solve my problem ? Thanx u
[ Sorry for my bad english, but i'm Italian ]
Fedex99 said:
Hì Guys,
I'm a new member.
Yesterday, i've deleted all folders and files into "SD Card" folder, that, for ICS, it is the System folder (so don't the external SD).
Now, my PC can't read my device, the Camera isn't running, some settings are Force Closing, i can't install custom ROMs and i can't root my device.
How can i solve my problem ? Thanx u
[ Sorry for my bad english, but i'm Italian ]
Click to expand...
Click to collapse
Repair via pcc
Or else flash ftf via flashtool
drsanket_xperia_u said:
Repair via pcc
Or else flash ftf via flashtool
Click to expand...
Click to collapse
Thank you for your answer drsanket_xperia_u, but PcC doesn't view my device.
In fact, Windows can install ADB's drivers, but can't install MTP's drivers. And i can't flash any ftf because flashtools doesn't view my phone...
Fedex99 said:
Thank you for your answer drsanket_xperia_u, but PcC doesn't view my device.
In fact, Windows can install ADB's drivers, but can't install MTP's drivers. And i can't flash any ftf because flashtools doesn't view my phone...
Click to expand...
Click to collapse
U seem to b new wid flashtool
What u need to is download ftf file for ur Xperia from development section
Now place that ftf in flashtool/firmware folder
Now
switch off ur phone and let it b disconnected
from pc
click on flashtool click on thunder
icon click on flashmode select The ftf file
click on exclude TA ( if it is present)
and click on NO FINAL VERIFICATION ( always
present)
click on start/flash flashtool will
show preparing files flashtool will now ask u to
connect ur phone
keep the phone off press
the volume down button ( keep it pressed, dun
leave it) and connect it to the usb 9. u will see
green led bar on ur xperia when it is
connected to usb and process of flashing will
start once start u can leave the volume down
button
let it complete to 100% flashtool
will now show " please disconnect and start ur
device " just disconnect it and start
drsanket_xperia_u said:
U seem to b new wid flashtool
What u need to is download ftf file for ur Xperia from development section
Now place that ftf in flashtool/firmware folder
Now
switch off ur phone and let it b disconnected
from pc
click on flashtool click on thunder
icon click on flashmode select The ftf file
click on exclude TA ( if it is present)
and click on NO FINAL VERIFICATION ( always
present)
click on start/flash flashtool will
show preparing files flashtool will now ask u to
connect ur phone
keep the phone off press
the volume down button ( keep it pressed, dun
leave it) and connect it to the usb 9. u will see
green led bar on ur xperia when it is
connected to usb and process of flashing will
start once start u can leave the volume down
button
let it complete to 100% flashtool
will now show " please disconnect and start ur
device " just disconnect it and start
Click to expand...
Click to collapse
I followed your guide to flash a Stock Rom, but despite the procedure is succesfull, the situation is the same !
Is there another metod I can try ? Thanx.
drsanket_xperia_u said:
U seem to b new wid flashtool
What u need to is download ftf file for ur Xperia from development section
Now place that ftf in flashtool/firmware folder
Now
switch off ur phone and let it b disconnected
from pc
click on flashtool click on thunder
icon click on flashmode select The ftf file
click on exclude TA ( if it is present)
and click on NO FINAL VERIFICATION ( always
present)
click on start/flash flashtool will
show preparing files flashtool will now ask u to
connect ur phone
keep the phone off press
the volume down button ( keep it pressed, dun
leave it) and connect it to the usb 9. u will see
green led bar on ur xperia when it is
connected to usb and process of flashing will
start once start u can leave the volume down
button
let it complete to 100% flashtool
will now show " please disconnect and start ur
device " just disconnect it and start
Click to expand...
Click to collapse
Dude... U gave me these instructions to spawks thread. He said something about installing drivers. I didn't get him. Can u tell me if I can use this to install ftf??
Sent from my ST25i using Tapatalk 2
Fedex, you're still getting all the issues like Camera failing and all ?
And Maazdraco,yes thats the way to flash FTF with Flashtool If your phone isnt detected, you gotta install the Flashmode drivers and your Device's drivers from drivers folder whereever you installed Flashtool
Hope it helps
Cheers
Min3r said:
Fedex, you're still getting all the issues like Camera failing and all ?
And Maazdraco,yes thats the way to flash FTF with Flashtool If your phone isnt detected, you gotta install the Flashmode drivers and your Device's drivers from drivers folder whereever you installed Flashtool
Hope it helps
Cheers
Click to expand...
Click to collapse
Thank You very much but it takes a lot of time. Do I have to put the computer Internet on? Do I have to connect my phone to the pc and if yes than in which mode?
I click to install 3 drivers- xperia u, flashmode, fastboot. Please help
Regards
Sent from my ST25i using Tapatalk 2
Nope, internet isnt required. Just turn off phone, Then follow the instructions exactly as said by Dr.Sanket It'll work fine
maazdraco said:
Thank You very much but it takes a lot of time. Do I have to put the computer Internet on? Do I have to connect my phone to the pc and if yes than in which mode?
I click to install 3 drivers- xperia u, flashmode, fastboot. Please help
Regards
Sent from my ST25i using Tapatalk 2
Click to expand...
Click to collapse
Hi buddy
guess u r having trouble wid drivers
What Windows r u using??
If it is xp then make sure u have pcc installed
And if windows 7 then before starting flashing procedure
Jz once connect ur phone in flashmode so that the windows may instal drivers for it ( make sure mtp is off)
Were you rooted before this happened?
Sent from my Jellybean Xperia S
drsanket_xperia_u said:
Hi buddy
guess u r having trouble wid drivers
What Windows r u using??
If it is xp then make sure u have pcc installed
And if windows 7 then before starting flashing procedure
Jz once connect ur phone in flashmode so that the windows may instal drivers for it ( make sure mtp is off)
Click to expand...
Click to collapse
It's none of them. It's vista. What to do?
Sent from my ST25i using Tapatalk 2
---------- Post added at 11:34 PM ---------- Previous post was at 11:29 PM ----------
Ben36 said:
Were you rooted before this happened?
Sent from my Jellybean Xperia S
Click to expand...
Click to collapse
Nope
Sent from my ST25i using Tapatalk 2
Then you can't have deleted the system files?
Sent from my Jellybean Xperia S
Its just a problem with drivers.
Flashtool says to install drivers What to do???....
It's windows vista.
Sent from my ST25i using Tapatalk 2
---------- Post added at 11:43 PM ---------- Previous post was at 11:42 PM ----------
Ben36 said:
Then you can't have deleted the system files?
Sent from my Jellybean Xperia S
Click to expand...
Click to collapse
What????
I am not friggin rooted.
Sent from my ST25i using Tapatalk 2
There's a small mixup The person who deleted his system Files is Fedex99.maazdraco just wants to flash a stock FTF
Maazdraco, go to the directory where you installed Flashtool. There's a folder called Drivers there. Run the file inside and select Flashtool,Fastboot and also the device drivers for your phone Then try again
Cheers
Min3r said:
There's a small mixup The person who deleted his system Files is Fedex99.maazdraco just wants to flash a stock FTF
Maazdraco, go to the directory where you installed Flashtool. There's a folder called Drivers there. Run the file inside and select Flashtool,Fastboot and also the device drivers for your phone Then try again
Cheers
Click to expand...
Click to collapse
Thank You but that's what I did.
Do I need to have Internet access on the pc? Do I need to connect the phone? If yes then in which mode?
It takes a lot of time... Is it normal??
Sent from my ST25i using Tapatalk 2
No. No and No again Internet not required. Connect phone only when prompted. Mode required is Flashmode and I've shown below how to get to Flash Mode ( you need your phone turned off btw)
Ill quickly summarize
1) Start Flashtool
2) Click the Lightning icon then select your FTF
3) Exclude baseband if your device is STxxi and the firmware is for STxxa or viceversa
4) Press ok and start Flash. Then, after a minute or so, Flashtool will ask you to connect the device.
5) Turn off the phone. Connect the usb cable to the PC (not connected to Phone yet)
6) Holding down the "Volume Down" key, you connect the cable to your phone.
7) Give it a few seconds and a Green Light shows up. Then, flashing starts on Flashtool
8) Once flashtool starts flashing, you can stop holding down the Volume Key
9) Wait for the process to finish then unplugh the phone and turn it on
This should be clear enough. If you still have doubts, just reply here
Oh i see! Lol
Sent from my Jellybean Xperia S
Min3r said:
No. No and No again Internet not required. Connect phone only when prompted. Mode required is Flashmode and I've shown below how to get to Flash Mode ( you need your phone turned off btw)
Ill quickly summarize
1) Start Flashtool
2) Click the Lightning icon then select your FTF
3) Exclude baseband if your device is STxxi and the firmware is for STxxa or viceversa
4) Press ok and start Flash. Then, after a minute or so, Flashtool will ask you to connect the device.
5) Turn off the phone. Connect the usb cable to the PC (not connected to Phone yet)
6) Holding down the "Volume Down" key, you connect the cable to your phone.
7) Give it a few seconds and a Green Light shows up. Then, flashing starts on Flashtool
8) Once flashtool starts flashing, you can stop holding down the Volume Key
9) Wait for the process to finish then unplugh the phone and turn it on
This should be clear enough. If you still have doubts, just reply here
Click to expand...
Click to collapse
Sorry but i have a doubt.
After step 7 flashtool shows in red tgat drivers not installed. Install drivers they can be found in the driver folder. Driver blah... Blah....
Sent from my ST25i using Tapatalk 2
Hm.. Can you try rebooting after installing drivers and then running Flashtool as admin ? Vista can be a drag sometimes when it comes to working properly -
Related
Hi guys, I have a st17i bricked phone, it won't boot, when I connect it to usb it is recognized as mpc and not msc, so it can't enter in flashmode. Can someone help me here? Thanks in advance
Have you unlocked bootloader or something? How did you bricked your phone, I need more informations..
Sent from my WT19i using XDA
tenea said:
Hi guys, I have a st17i bricked phone, it won't boot, when I connect it to usb it is recognized as mpc and not msc, so it can't enter in flashmode. Can someone help me here? Thanks in advance
Click to expand...
Click to collapse
Are you reffering to MTP?
What you you done before getting this issue?
Sent from my ST17i using Tapatalk
Thanks for responses, frankly I don't know what happend to it, it came to me already broken, trying to flash but it won't enter it in msc mode (@ puppet13th: yes, I was reffering to mtp), and I don't know how to switch to msc because it doesn't boot. Thanks a lot for your help
Is there a way to switch it to msc with adb push or something? Anyone can help me?
Sent from my LG-P500 using Tapatalk
Enter flashmode for flashtool
Hey....i don't think you need to switch it to MSC mode for flashing.... did you try to enter flashmode by holding "Volume down" button while inserting the USB cable into the phone ? Are you trying to flash it via Flashtool ( it is the easiest way ) ?
crazy_4_and1 said:
Hey....i don't think you need to switch it to MSC mode for flashing.... did you try to enter flashmode by holding "Volume down" button while inserting the USB cable into the phone ? Are you trying to flash it via Flashtool ( it is the easiest way ) ?
Click to expand...
Click to collapse
Yes, I tried to flash it with flashtool, but it won't recognize the phone, holding volume down while inserting usb, and the mini led light up orange, so... what else can I do? .. thanks
Did You switch the phone off before that?
Procedure is:
1) Switch off the phone (remove battery if needed)
2) Press "volume down" and hold
3) Put he USB cable in.
Do You see driver installation dialog running in windows? wait until it finishes.
4) Start the flashtool
5) Flash the ROM.
Yes, I did exactly the same, but it doesn't install the drivers
Sent from my LG-P500 using Tapatalk
Then You need to install either Sony PC companion or form the Sony develeoper site the proper drivers.
Sony PC Companion You find here
Pc companion will install all the SE xperia drivers You need.
tenea said:
Yes, I did exactly the same, but it doesn't install the drivers
Sent from my LG-P500 using Tapatalk
Click to expand...
Click to collapse
You have drivers in Flashtool folder under : \flashtool\drivers install them , and accept all of the installation requests by Windows . Or install official drivers from Sony or from Google's SDK source .
:Flash a new kernel via FASTBOOT and install a rom or reflash the firmware with wotan client that worked for me
---------- Post added at 07:43 PM ---------- Previous post was at 07:37 PM ----------
zariin said:
Did You switch the phone off before that?
Procedure is:
1) Switch off the phone (remove battery if needed)
2) Press "volume down" and hold
3) Put he USB cable in.
Do You see driver installation dialog running in windows? wait until it finishes.
4) Start the flashtool
5) Flash the ROM.
Click to expand...
Click to collapse
I did it like this: connect phone in fastboot mode, then i installed the drivers manually when this is not working plug out your phone install PDA net on your computer, connect your phone in fast boot mode and the program will install the drivers
Sorry for my bad english
when you plug in your usb while holding volume down key the led should be green not orange.
green led means the phone is in flashmode.
Hi Guys i have this same problem whith my Xperia Active, when i on the tell its only vibrate.... i flashing this phone whith flashtool and new fw but still bricked , please help me!!
remove battery and put it again .... thn try to enter flashmode ... thn flash whatever you want.
prateek_gemini said:
remove battery and put it again .... thn try to enter flashmode ... thn flash whatever you want.
Click to expand...
Click to collapse
hi this not help ,any idea?
This may help you 90%... just try it
I also have bricked up my Xperia Neo V
I tried many tools but no one helped.....
Finally I got back my bricked phone back by doing following things....
download all the needed things you need to update phone with wotan X tool unlock, you will need
1. X_Unlock_Tool_Setup_Wotan
2. WotanClient
3. USBFlashDriver
you can get all these from wotan website.
also create an account on wotan website. NO NEED TO BUY ANY CREDITS
install all above mentioned tools.
then run X UNLOCK TOOL
then follow on screen instructions untill you get an error that you don't have sufficient credits.
NOTE THAT NOW YOUR PHONE HAS GOT A SIM LOCK CERTIFICATE FROM THIS TOOL. BUT THE POSITIVE ASPECT IS THAT YOU CAN NOW FLASH ANY ftf FILE USING FLASH TOOL. SIM LOCK WILL BE REMOVED AFTER THE WHOLE PROCESS.
now flash the desired firmware on your phone.
power up your phone
if it power ups successfully, then your phone will not detect your SIM card.
finally use S1 tool to remove SIM LOCK CERTIFICATE.
CLICK THANKS IF IT WORKS
BEST OF LUCK
Same issue
I am using an Unlocked Bootloader Xperia Ray and it got bricked when I tried to flash in Cyanogen mod 7 for Xperia Ray...
Now I am trying to flash stock roms using Flashtool but it is requiring me to be in Flasmode which obviously I can't do it. I have done the steps but it wont recognize my phone.
I am also trying to figure how to flash a kernel but every kernel that I download comes in an *.img format but FLASH TOOLs require FTF file to flash the kernel.. how can I do it?
spoinkyness said:
I am using an Unlocked Bootloader Xperia Ray and it got bricked when I tried to flash in Cyanogen mod 7 for Xperia Ray...
Now I am trying to flash stock roms using Flashtool but it is requiring me to be in Flasmode which obviously I can't do it. I have done the steps but it wont recognize my phone.
I am also trying to figure how to flash a kernel but every kernel that I download comes in an *.img format but FLASH TOOLs require FTF file to flash the kernel.. how can I do it?
Click to expand...
Click to collapse
Use fastboot mode instead of flashtool mode in flashtool
pikpok said:
Use fastboot mode instead of flashtool mode in flashtool
Click to expand...
Click to collapse
Do i have to change the file name of the kernels to boot.img to make it run in fast boot?
Hi guys. I bought Xperia Go today and I'm stuck in Gingerbread (2.3.7). I go to Update Center, but same message: Your phone already has the latest bla bla bla. How to update to ICS? Any Sony software?
Thanks
Use flashtool to upgrade
Sent from my ST25i using Tapatalk 2
---------- Post added at 09:50 PM ---------- Previous post was at 09:47 PM ----------
1.latest flashtool
2. Xperia ics ftf
3. windows pc or laptop , in windows xp u may
need to have pc companion
and other phone drivers installed
4. Usb cable
5. patience nd a working brain download both
the things
1. after downloading of flashtool install it in c
drive of ur pc
2. copy that ftf file
and and paste it in c\flashtool\ firmwares
( delete everything rest from that firmware
folder... it should have only ur pasted ftf file)
3. go to c/flashtool/drivers and install drivers
for ur xperia
4. now here comes the main part
switch off ur phone and let it b disconnected
from pc
5. click on flashtool click on thunder
icon click on flashmode select The ftf file
click on exclude TA ( if it is present)
and click on NO FINAL VERIFICATION ( always
present)
6. click on start/flash flashtool will
show preparing files flashtool will now ask u to
connect ur phone
7. keep the phone off press
the volume down button ( keep it pressed, dun
leave it) and connect it to the usb
8. u will see
green led bar on ur xperia when it is
connected to usb and process of flashing will
start once start u can leave the volume down
button
9.let it complete to 100% flashtool
will now show " please disconnect and start ur
device " just disconnect it and start ur device
GOOD LUCK
Sent from my ST25i using Tapatalk 2
hi i am new and I have a problem with my xperia mini
I bought a few months ago worked well then I turn I try to recover it by seus but halfway through I ran out of energy and my pc was shut overcome this try the procedure again but when you connect the computer to recognize me as a pc QHSUS_LOAD device
and investigated and there is an option that was tested with HTC devices that will spend the same on this link you explain http://forum.xda-developers.com/showthread.php?t=1990043
my preunta in my case is whether you can do the same or is there another option
thanks
Did you try reflashing with flashtool? You don't need root or anything and it's flashmode, it should recognize it. Try that
anerik said:
Did you try reflashing with flashtool? You don't need root or anything and it's flashmode, it should recognize it. Try that
Click to expand...
Click to collapse
if you try but not recognized
but could you tell me the steps to see if I did it right please
thanks
villegasg1984 said:
if you try but not recognized
but could you tell me the steps to see if I did it right please
thanks
Click to expand...
Click to collapse
Install flashtool drivers, then open flashtool, select firmware, connect device, IF it's first time using it windows will install its own drivers for flash device so flash will fail, just do again and ur good 2 go.
anerik said:
Install flashtool drivers, then open flashtool, select firmware, connect device, IF it's first time using it windows will install its own drivers for flash device so flash will fail, just do again and ur good 2 go.
Click to expand...
Click to collapse
this is what I did
* Run the FlashTool.exe,
The lightning flash click "Flash"
locate the "firmware" and press ok
then the login window appears and there ouedo not go through that computer does not recognize the
villegasg1984 said:
this is what I did
* Run the FlashTool.exe,
The lightning flash click "Flash"
locate the "firmware" and press ok
then the login window appears and there ouedo not go through that computer does not recognize the
Click to expand...
Click to collapse
Did u install the drivers from c drive-flashtool folder-drivers folder and install flashtool-drivers.exe and after that place the firmware in firmware folder and then open flashtool, click the flashing icon select flashmode select ur firmware and then press vol-down button in ur phone and connect to pc and then flash.....
Press THANKS if I helped,
Regards,
AJ
Sent from my Xperia Mini Pro using Tapatalk 2
alokbina said:
Did u install the drivers from c drive-flashtool folder-drivers folder and install flashtool-drivers.exe and after that place the firmware in firmware folder and then open flashtool, click the flashing icon select flashmode select ur firmware and then press vol-down button in ur phone and connect to pc and then flash.....
Press THANKS if I helped,
Regards,
AJ
Sent from my Xperia Mini Pro using Tapatalk 2
Click to expand...
Click to collapse
I have done so but my pc recognizes the device as QHSUS_LOAD and not as it actually is
Hey!
Im having problems with Flashmode on sony xperia U. Fastboot works just fine, but my phone wont stay in flashmode. I have installed drivers from Flashtool. I tried with diffrent usb- ports and on other pc.
Why do u keep it to stay in flashmode??
Are u connecting this way?
Phone switched off and disconnected from computer
Ftf prepared from flashtool
Pc asking to connect the phone in flashmode
Phone connected with volume down button pressed
drsanket_xperia_u said:
Why do u keep it to stay in flashmode??
Are u connecting this way?
Phone switched off and disconnected from computer
Ftf prepared from flashtool
Pc asking to connect the phone in flashmode
Phone connected with volume down button pressed
Click to expand...
Click to collapse
Yes, thats the way im connecting it.
I got ICS 61.1.B.1.54 software in my phone. I i will flash ICS 6.1.1.B.1.10 kernel, root the phone with Bin4rys metdod and then flash ICS 61.1.B.1.54 kernel back.
perkele90 said:
Yes, thats the way im connecting it.
I got ICS 61.1.B.1.54 software in my phone. I i will flash ICS 6.1.1.B.1.10 kernel, root the phone with Bin4rys metdod and then flash ICS 61.1.B.1.54 kernel back.
Click to expand...
Click to collapse
try installing drivers and then connect fone in flashmode and then let the driver get install and then disconnect and reboot your PC then after reboot start flashtool and then start the flashing process........
@[email protected] said:
try installing drivers and then connect fone in flashmode and then let the driver get install and then disconnect and reboot your PC then after reboot start flashtool and then start the flashing process........
Click to expand...
Click to collapse
Driver wont install because my phone goes off from flashmode before the driver gets succesfully installed :/
perkele90 said:
Driver wont install because my phone goes off from flashmode before the driver gets succesfully installed :/
Click to expand...
Click to collapse
first connect the fone and then press and hold the vol down button........ see if that helps.........
I solved it. Thanks for help. Rooted my phone
Sent from my ST25i using xda app-developers app
Hello,
I rooted my mobile way back in b.1.10. Yesterday I flashed indian firmware of b.1.54 & somehow my mobile had no root permissions any more. But the bootloader is still unlocked as I've checked. I want root permissions & I've found out that rooting is only possible if I downgraded to b.1.10 firmware.
Now am unable to install flashmode drivers. It did not ask me for these drivers yesterday when I flashed b.1.54.
How do I install them? Whenever i prepare flashtool for b.1.10.ftf to flash & switch off, connect my mobile in flashmode, it stays in flashmode for 3 seconds & skips into regular mode & there's an error message in flashtool.
How to install flashmode drivers?
Please help
Thanks
perkele90 said:
I solved it. Thanks for help. Rooted my phone
Sent from my ST25i using xda app-developers app
Click to expand...
Click to collapse
Hello Experts,
I was trying to upgrade my xperia u to jelly bean via cm10. This is my first attempt on this and i hope i have bricked it.
This is the current status of my phone:
Phone Not Booting ! When i press power button, only vibrates once and never boots up.
Followed few older threads on this and tried with flashtool, phone connects in flash mode but flashing any ftf never succeeds. Error flashing. aborted everytime.
The last step i did before the phone went dead was : fastboot flash boot boot.img with FXP236-cm-10-20130910-UNOFFICIAL-urushi build.
The phone is rooted/bootloader unlocked(followed the steps from sony site)/Clockwordmod installed
This is the page which tempted me to go for the upgrade : androidlegend's "Update Xperia U ST25i to Android 4.1.2 Jelly Bean via Cyanogenmod 10"
Please please help me on this.
Yo you flashed the wrong cm for your device. The one you flashed is meant for another device the one you flashed is for XPERIA RAY
EDIT: The more I think of it, the more I think you hard bricked.
Sent from my HONAMI THEMED Nexus 5 using Tapatalk 2
@itzvicky
Have you flashed the file you are trying to flash before on the same PC?
I suggest you start repair with PC Companion, then when download is finished and it ask to connect in flash mode built the formware FTF with flashtool, and see if that fails as well.
http://forum.xda-developers.com/showthread.php?t=2188129
http://mytechencounters.wordpress.c...eate-an-ftf-file-of-your-xperia-ics-firmware/
ChikeD said:
@itzvicky
Have you flashed the file you are trying to flash before on the same PC?
I suggest you start repair with PC Companion, then when download is finished and it ask to connect in flash mode built the formware FTF with flashtool, and see if that fails as well.
http://forum.xda-developers.com/showthread.php?t=2188129
http://mytechencounters.wordpress.c...eate-an-ftf-file-of-your-xperia-ics-firmware/
Click to expand...
Click to collapse
To add on can you post the log?
Sent from my HONAMI THEMED Nexus 5 using Tapatalk 2
You can access to CWM?
Sent from my Xperia Sola using xda premium
Sorry, if you flashed the wrong kernel for your device there's a good chance you're hard bricked... But always try a stock ftf
Sent from my Nexus 5 using Tapatalk
AndroidNoob69 said:
Yo you flashed the wrong cm for your device. The one you flashed is meant for another device the one you flashed is for XPERIA RAY
EDIT: The more I think of it, the more I think you hard bricked.
Sent from my HONAMI THEMED Nexus 5 using Tapatalk 2
Click to expand...
Click to collapse
O M G ! is there a way to recover or it s all gone
ChikeD said:
@itzvicky
Have you flashed the file you are trying to flash before on the same PC?
I suggest you start repair with PC Companion, then when download is finished and it ask to connect in flash mode built the formware FTF with flashtool, and see if that fails as well.
http://forum.xda-developers.com/showthread.php?t=2188129
http://mytechencounters.wordpress.c...eate-an-ftf-file-of-your-xperia-ics-firmware/
Click to expand...
Click to collapse
PC Companion is not recognizing the device and SONY UPDATE Service does not have xperia u anymore in the list of phones
all i have is the flashtool recognizing the device in flash mode but ultimately flashing any ftf fails with error flashing. aborted
itzvicky said:
PC Companion is not recognizing the device and SONY UPDATE Service does not have xperia u anymore in the list of phones
all i have is the flashtool recognizing the device in flash mode but ultimately flashing any ftf fails with error flashing. aborted
Click to expand...
Click to collapse
I asked specific question for a reason, so please answer it.
Also if you have used PC Companion with your phone before there is no need for it to recogniise it or even be connected to begin repair.
And Xperia U is definately showing in SUS but you cannot use it because it would not even begin downloading for unlocked bootloader.
ChikeD said:
I asked specific question for a reason, so please answer it.
Also if you have used PC Companion with your phone before there is no need for it to recogniise it or even be connected to begin repair.
And Xperia U is definately showing in SUS but you cannot use it because it would not even begin downloading for unlocked bootloader.
Click to expand...
Click to collapse
apologies @ChikeD if i have misunderstood you.
I couldn't understand your question "Have you flashed the file you are trying to flash before on the same PC?"
I suggest you start repair with PC Companion, then when download is finished and it ask to connect in flash mode built the formware FTF with flashtool, and see if that fails as well. => I tried repair with pc companion, once after step 2 to prepare computer for repair process it asks to select the phone and then it asks to connect the phone by pressing volume down, at this point it is not recognizing the phone being connected. I could see the RED LED Light blinking when connected to pc but not detecting
wierdly, once i saw my phone getting detected by sony pc companion saying Your sony xperia u (st25i) is connected but before i click that it got disconnected again.
itzvicky said:
apologies @ChikeD if i have misunderstood you.
I couldn't understand your question "Have you flashed the file you are trying to flash before on the same PC?"
I suggest you start repair with PC Companion, then when download is finished and it ask to connect in flash mode built the formware FTF with flashtool, and see if that fails as well. => I tried repair with pc companion, once after step 2 to prepare computer for repair process it asks to select the phone and then it asks to connect the phone by pressing volume down, at this point it is not recognizing the phone being connected. I could see the RED LED Light blinking when connected to pc but not detecting
wierdly, once i saw my phone getting detected by sony pc companion saying Your sony xperia u (st25i) is connected but before i click that it got disconnected again.
Click to expand...
Click to collapse
PC Companion won't flash unlocked bootloader, but you have the files now, follow the guids to buil your own FTF and try flash it with flashtool.
ChikeD said:
PC Companion won't flash unlocked bootloader, but you have the files now, follow the guids to buil your own FTF and try flash it with flashtool.
Click to expand...
Click to collapse
Just curious won't it download the files once after the device gets connected ? that's what i could see from the pictures in the guides to prepare ftf from sony update service. Where the files would be in case of a pc companion
itzvicky said:
Just curious won't it download the files once after the device gets connected ? that's what i could see from the pictures in the guides to prepare ftf from sony update service. Where the files would be in case of a pc companion
Click to expand...
Click to collapse
Same exact place
ChikeD said:
Same exact place
Click to expand...
Click to collapse
sorry i could find any sin files at C:\Program Files (x86)\Sony\Sony PC Companion
itzvicky said:
sorry i could find any sin files at C:\Program Files (x86)\Sony\Sony PC Companion
Click to expand...
Click to collapse
sin file?
Read the guid of your chice and follow the instructions.
ChikeD said:
sin file?
Read the guid of your chice and follow the instructions.
Click to expand...
Click to collapse
I could not get the files downloaded anyways as the phone is not getting detected via pc companion... any other help ? all i have now is the red led glowing when connected to laptop.
Just, flash stock with flashtool?
Sent from my Xperia Sola using xda premium
itzvicky said:
I could not get the files downloaded anyways as the phone is not getting detected via pc companion... any other help ? all i have now is the red led glowing when connected to laptop.
Click to expand...
Click to collapse
Take out the baterry for few minutes and put it back in, open flashtool, and while it is open, hold the volume down key and connect to the USB cable. leave it connected for a minute, then copy the log and post it or save the log and attach the log file to your next post.
When you repaired with PC Companion did it ask you to power off the phone and connect it while holding the colume down ket?
Copy the next line: C:\ProgramData\Sony Ericsson\Update Engine\db\13740270\blob_fs
Click the windows button, psate it and press enter, does a window open with 3-4 files beginning with "FILE_" near the top of the list?
---------- Post added at 12:23 AM ---------- Previous post was at 12:16 AM ----------
manudo said:
Just, flash stock with flashtool?
Sent from my Xperia Sola using xda premium
Click to expand...
Click to collapse
He can't "Just flash" because it's failing
ChikeD said:
Take out the baterry for few minutes and put it back in, open flashtool, and while it is open, hold the volume down key and connect to the USB cable. leave it connected for a minute, then copy the log and post it or save the log and attach the log file to your next post.
When you repaired with PC Companion did it ask you to power off the phone and connect it while holding the colume down ket?
Copy the next line: C:\ProgramData\Sony Ericsson\Update Engine\db\13740270\blob_fs
Click the windows button, psate it and press enter, does a window open with 3-4 files beginning with "FILE_" near the top of the list?
---------- Post added at 12:23 AM ---------- Previous post was at 12:16 AM ----------
He can't "Just flash" because it's failing
Click to expand...
Click to collapse
Couldn't he flash any rom with command line method?
macci10 said:
Couldn't he flash any rom with command line method?
Click to expand...
Click to collapse
Comand line how?