Related
Can i flash new kernel to my s2 ICS XXLPS , to get root and CWM , AND THEN FLASH gb ROM?
You need to flash stock Gb rom and them install Gb rooted kernel with cwm and busybox.
Sent from my Galaxy S2 GT i9100
boki9999 said:
You need to flash stock Gb rom and them install Gb rooted kernel with cwm and busybox.
Sent from my Galaxy S2 GT i9100
Click to expand...
Click to collapse
Okey , thanks But when flash rom GB kernel dont flash by it self of zip?
vanillaLVL said:
Can i flash new kernel to my s2 ICS XXLPS , to get root and CWM , AND THEN FLASH gb ROM?
Click to expand...
Click to collapse
u mean stock GB rom or the custom One?
if its stock GB then dwnld the firmware(GB) and flash thro ODIN instead after following the ODIN flash instruction of the same.
if its custom GB rom then u can flash the same thro CWM after reading the installation procedure in the OP of that rom thread
Sun90 said:
u mean stock GB rom or the custom One?
if its stock GB then dwnld the firmware(GB) and flash thro ODIN instead after following the ODIN flash instruction of the same.
if its custom GB rom then u can flash the same thro CWM after reading the installation procedure in the OP of that rom thread
Click to expand...
Click to collapse
Okey , i can just then flash Custom GB zip ?
vanillaLVL said:
Okey , i can just then flash Custom GB zip ?
Click to expand...
Click to collapse
in order to flash custom Gb rom zip ur phone has to be rooted priorly.
Sun90 said:
in order to flash custom Gb rom zip ur phone has to be rooted priorly.
Click to expand...
Click to collapse
Okey it will be dine by installing ROOTED ICS kernel with odin?
Yes. I recommend Siyah 3.5.2.
Sent from my Galaxy S2 GT i9100
Okey , all is workin great , thank you for fast respound
Im was afraid because it is my friend phone
Actually you don't need root/custom kernel to flash a rom.
1. Get this
2. Get the rom zip you want
3. Place both in external sdcard
4. Go to stock recovery (when phone is off, hold home + power + volume up button)
5. Flash the first zip (recovery)
6. New recovery opens
7. Do a backup to be safe
8. Wipe data/cache or factory reset
9. Flash the from zip
8. Reboot
9. If you need to go back to ICS do a restore
With this method you will not have the yellow triangle or custom binary
today i download and install omega v16 jb 4.1.2. its automatically erase my siyah kernel and install philz kernel, now i try to flash my mobile with latest siyah kernel cwm zip by install zip in philz cwm but its not flashing. can some one help me out how to install dual boot using omega v16 jb 4.1.2 rom
appumohanty said:
today i download and install omega v16 jb 4.1.2. its automatically erase my siyah kernel and install philz kernel, now i try to flush my mobile with latest siyah kernel cwm zip by install zip in philz cwm but its not flushing. can some one help me out how to install dual boot using omega v16 jb 4.1.2 rom
Click to expand...
Click to collapse
What do you mean by 'it's not flashing'? You selected Install zip from sd-card and then what happened?
Sent from the Matrix
Donnie Sins said:
What do you mean by 'it's not flashing'? You selected Install zip from sd-card and then what happened?
Sent from the Matrix
Click to expand...
Click to collapse
ya i select install zip , then choose zip from sd card then siyah 5.01 cwm zip, its starting installation but suddenly its exiting flashing,
Flash with Odin in Download mode.
And you can't flush a kernel, but you can flush a toilet.
Sent from my GT-I9100
appumohanty said:
ya i select install zip , then choose zip from sd card then siyah 5.01 cwm zip, its starting installation but suddenly its exiting flashing,
Click to expand...
Click to collapse
Maybe you have a corrupted downloadfile, so you
have to download the kernel again.
boki9999 said:
Flash with Odin in Download mode.
And you can't flush a kernel, but you can flush a toilet.
Sent from my GT-I9100
Click to expand...
Click to collapse
^^
But it should be possible through CWM...
Sent from the Matrix
Donnie Sins said:
Maybe you have a corrupted downloadfile, so you
have to download the kernel again.
i try with this file before, its was working with other kernel after installing philz kernel its not working, omega by default install philz kernel and after installation siyah is not flashing,
^^
But it should be possible through CWM...
Sent from the Matrix
Click to expand...
Click to collapse
i try with this file before, its was working with other kernel after installing philz kernel its not working, omega by default install philz kernel and after installation siyah is not fashing,
appumohanty said:
i try with this file before, its was working with other kernel after installing philz kernel its not working, omega by default install philz kernel and after installation siyah is not fashing,
Click to expand...
Click to collapse
have you tried flashing in download mode with odin?
boki9999 said:
have you tried flashing in download mode with odin?
Click to expand...
Click to collapse
no i will try it now and will let you know
finally able to flash siyah kernel but omega v14 not running, its doesn't support .
appumohanty said:
finally able to flash siyah kernel but omega v14 not running, its doesn't support .
Click to expand...
Click to collapse
Did you flash Siyah 5.0i?
boki9999 said:
Did you flash Siyah 5.0i?
Click to expand...
Click to collapse
i flash with latest 5.0.1, but i am getting black screen after after kernel booting,
I have the same problem. And I don't have odin.
How can I go back to Siyah from the 4.1.2 JB leak with philz kernel ?
the omega does not start because the siyah is not compatible with the new leak 4.1.2 LJS .... there aren't still compatible kernel ... You need to reinstall the kernel Philzo to go back
alister91 said:
the omega does not start because the siyah is not compatible with the new leak 4.1.2 LJS .... there aren't still compatible kernel ... You need to reinstall the kernel Philzo to go back
Click to expand...
Click to collapse
same thing i try lot, to go back siyah from philz and when ever i try to flash siyah kernel 5.0i its shows some wrong message so what i did i flash with siyah 4.0.1 link for download it http://downloadandroidrom.com/file/GalaxyS2/kernels/ICS/SiyahJBICS/Siyah-s2-v4.0.1-CWM.zip
download this kernel and i am sure it can be flash by philz kernel. once flash over its restart and your mobile stuck on siyah logo, downt worry remove your batter and boot in to siyah recovery and reload other rom, be sure to save rom to your memory card other wise in siyah recovery you can go for mount usb and copy rom. i think this will help you lot
den_breacker said:
I have the same problem. And I don't have odin.
How can I go back to Siyah from the 4.1.2 JB leak with philz kernel ?
Click to expand...
Click to collapse
same thing i try lot, to go back siyah from philz and when ever i try to flash siyah kernel 5.0i its shows some wrong message so what i did i flash with siyah 4.0.1 link for download it http://downloadandroidrom.com/file/GalaxyS2/kernels/ICS/SiyahJBICS/Siyah-s2-v4.0.1-CWM.zip
download this kernel and i am sure it can be flash by philz kernel. once flash over its restart and your mobile stuck on siyah logo, downt worry remove your batter and boot in to siyah recovery and reload other rom, be sure to save rom to your memory card other wise in siyah recovery you can go for mount usb and copy rom. i think this will help you lot
1. Siyah Kernal Odin version : Flash via Odin ( http://d-h.st/Bcf )
2. Enter into Siyah recovery and flash a compatibale ROM.
Done.
If you havent got a rom on your micro SD card
a) In siyah kernal mount USB storage.
b) Use an micro-sd reader to copy flashable zip
den_breacker said:
I have the same problem. And I don't have odin.
How can I go back to Siyah from the 4.1.2 JB leak with philz kernel ?
Click to expand...
Click to collapse
Currently siyah doesn't support leaked jb.. So stay with Phil kernal...
You can try latest Dori kernal... Dual boot with omega... Rom my frnd using that...
Sent from my GT-I9100 using xda premium
xDa_nightfury said:
Currently siyah doesn't support leaked jb.. So stay with Phil kernal...
You can try latest Dori kernal... Dual boot with omega... Rom my frnd using that...
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
unfortunately even dorimanx works .... you have to wait
appumohanty said:
today i download and install omega v16 jb 4.1.2. its automatically erase my siyah kernel and install philz kernel, now i try to flash my mobile with latest siyah kernel cwm zip by install zip in philz cwm but its not flashing. can some one help me out how to install dual boot using omega v16 jb 4.1.2 rom
Click to expand...
Click to collapse
http://db.tt/YceTd0pl flash a kernel cleaning script before you flash a new kernel
---------- Post added at 02:29 PM ---------- Previous post was at 02:25 PM ----------
den_breacker said:
I have the same problem. And I don't have odin.
How can I go back to Siyah from the 4.1.2 JB leak with philz kernel ?
Click to expand...
Click to collapse
Siyah,Dorimanx kernel does not have a support yet in jb leaked xxlsj, but for sure they are working with it now..
Thanks A Lot
appumohanty said:
same thing i try lot, to go back siyah from philz and when ever i try to flash siyah kernel 5.0i its shows some wrong message so what i did i flash with siyah 4.0.1 link for download it download this kernel and i am sure it can be flash by philz kernel. once flash over its restart and your mobile stuck on siyah logo, downt worry remove your batter and boot in to siyah recovery and reload other rom, be sure to save rom to your memory card other wise in siyah recovery you can go for mount usb and copy rom. i think this will help you lot
Click to expand...
Click to collapse
Thanks a lot man....had been searching around a lot for this...didnt wanna use odin... so was looking for a compatible siyah kernel...your post helped a lot....many thanks...
how to root leaked xxlsj 4.1.2 for s2??
gdstheking said:
how to root leaked xxlsj 4.1.2 for s2??
Click to expand...
Click to collapse
Download and flash the 'Philz' Kernel to root ur phone on xxlsj 4.1.2
since its the only Custom kernel that supports the same
ur 1st TM by me enjoy
Sun90 said:
Download and flash the 'Philz' Kernel to root ur phone on xxlsj 4.1.2
since its the only Custom kernel that supports the same
ur 1st TM by me enjoy
Click to expand...
Click to collapse
what about "Siyah-s2-v4.1.5"???
i flashed using philz kernal but no supersu >>??
Why not make a 3rd thread about that......you might get lucky.
Just flash the philz kernel and then install supersu via cwm
Click thanks if I helped you
ankur.co.in said:
Just flash the philz kernel and then install supersu via cwm
Click thanks if I helped you
Click to expand...
Click to collapse
given give a download link for supersu for philz kernel
Youu will not get root access if you flashed it via odin, download cmw version of it and.flash
Sent from my GT-I9100 using xda premium
philz kernel
ankur.co.in said:
Just flash the philz kernel and then install supersu via cwm
Click thanks if I helped you
Click to expand...
Click to collapse
first of all i clicked thanks already. Hehe.
Could you please send me the link where i can download philz kernel for jb.
It would be a great help.
I have stocked jb leaked and i want to change to rainbox.
Ill click thanks again just guide me where can i download the file.
droid_s2 said:
first of all i clicked thanks already. Hehe.
Could you please send me the link where i can download philz kernel for jb.
It would be a great help.
I have stocked jb leaked and i want to change to rainbox.
Ill click thanks again just guide me where can i download the file.
Click to expand...
Click to collapse
Here is the link bro sorry for late reply btw thanks for your thanks
http://forum.xda-developers.com/showthread.php?t=2031042
hey all.. im a newbie looking for some help
i did root my sgs2 phone jb version with cwm and i have superuser app installed and i have verified that it is rooted.
however i download beats audio which jammed my music player ..
so i was wondering if i can flash the stock jb again via odin ??? and will my phone if flashing works make it unrooted again?
aboalghool said:
hey all.. im a newbie looking for some help
i did root my sgs2 phone jb version with cwm and i have superuser app installed and i have verified that it is rooted.
however i download beats audio which jammed my music player ..
so i was wondering if i can flash the stock jb again via odin ??? and will my phone if flashing works make it unrooted again?
Click to expand...
Click to collapse
Yeah after flashing the firmware via odin ur phone will be unrooted
That 'exynos exploit' by 'chaingire' can also be used to root XXLSJ in just one click, without any flashing etc.
Sent from my GT-I9100 using xda premium
Hi I hope someone on here can help me...
I recently flashed my girlfriends sgs2 (via odin pc) with the new XXLSJ jelly bean leak. Because its not 'officially' released we have to use Philz kernel, is that correct? I basically want completely stock and the update WITHOUT ROOT AND YELLOW TRIANGLE...
Is this possible?
I myself have the same phone and have custom rom based on this leak and Philz kernel, but for some reason have no triangle? ?
So, I want...
- Jelly Bean Stock rom
- No Root/Triangle.
Thanks. ..
Maybe I should have waited for the official release..
sent from the unknown
match_stick said:
Hi I hope someone on here can help me...
I recently flashed my girlfriends sgs2 (via odin pc) with the new XXLSJ jelly bean leak. Because its not 'officially' released we have to use Philz kernel, is that correct? I basically want completely stock and the update WITHOUT ROOT AND YELLOW TRIANGLE...
Is this possible?
I myself have the same phone and have custom rom based on this leak and Philz kernel, but for some reason have no triangle? ?
So, I want...
- Jelly Bean Stock rom
- No Root/Triangle.
Thanks. ..
Maybe I should have waited for the official release..
sent from the unknown
Click to expand...
Click to collapse
When u flashed that leaked firmware, ur phone was already in stock but with TW 5 unrooted condition.
Secondly, for that triangle problem....Use the 'triangle away' app from play store.
Also, if u want official update then for few weeks more :/
Sent from my GT-I9100 using xda premium
Cool. I've heard some stories of hardbrick when using that app... but will most likely wait for the official update
sent from the unknown
Hi Guys,
I'm using LSJ and today I tried to install another ROM (like CM10) and is shown in recovey error code 7.
I'm currently using version NeatRomLite 23-Nov. It's the only one I use. I've used the recovery Phill and CMW and the same error occurs.
Someone has gone through this problem?
igorazevedo said:
Hi Guys,
I'm using LSJ and today I tried to install another ROM (like CM10) and is shown in recovey error code 7.
I'm currently using version NeatRomLite 23-Nov. It's the only one I use. I've used the recovery Phill and CMW and the same error occurs.
Someone has gone through this problem?
Click to expand...
Click to collapse
Flash Siyah kernel in ODIN then flash your rom as normal in cwm.
TheATHEiST said:
Flash Siyah kernel in ODIN then flash your rom as normal in cwm.
Click to expand...
Click to collapse
Thanks man. Work's perfectly.
I recently heard about PAC MAN ROM 4.2.2 for Galaxy GT I9100 which is hybrid of different ROMs like Paranoid, CynogenMod etc. I wanted to know how much stable is this ROM in terms of performance and battery life. Additionally, is custom kernel and CWM required to install this ROM or simply flashing the new ROM will do the job? I really am looking forward to installing this ROM in my phone
I have rooted S2 GT I 9100 with official 4.1.2, stock recovery and stock kernel.
Sent from my GT-I9100 using xda app-developers app
ssanjy said:
I wanted to know how much stable is this ROM in terms of performance and battery life.
Click to expand...
Click to collapse
That depends on each user mate. I suggest you read user opinions in the ROM's thread to find out.
ssanjy said:
Additionally, is custom kernel and CWM required to install this ROM or simply flashing the new ROM will do the job? I really am looking forward to installing this ROM in my phone
Click to expand...
Click to collapse
Like all custom ROMs, PACman ROM requires CWM and root. You don't need a custom kernel per se, but flashing a custom kernel is the best way to get root as well as CWM.
immortalneo said:
That depends on each user mate. I suggest you read user opinions in the ROM's thread to find out.
Like all custom ROMs, PACman ROM requires CWM and root. You don't need a custom kernel per se, but flashing a custom kernel is the best way to get root as well as CWM.
Click to expand...
Click to collapse
Can you please suggest me a stable custom Kernel that would be comparatively safe for my device GT I9100. I would be quite glad if you would help me with it...:good:
In discussing about the kernel in this thread in post# 619 pg 62 Viper has suggested me with Philz Kernel and FAQs of PacMan ROM, they suggest Dorimax Kernel for my device. So, are these kernel better in performance than the stock kernel or not and does performance of ROM depend upon kernel as well? Since I can backup my ROM and flash new ROM with temporary CWM, I am thinking of using it instead of other custom kernel so as not to mess up with my stock kernel.
ssanjy said:
Can you please suggest me a stable custom Kernel that would be comparatively safe for my device GT I9100. I would be quite glad if you would help me with it...:good:
In discussing about the kernel in this thread in post# 619 pg 62 Viper has suggested me with Philz Kernel and FAQs of PacMan ROM, they suggest Dorimax Kernel for my device. So, are these kernel better in performance than the stock kernel or not and does performance of ROM depend upon kernel as well? Since I can backup my ROM and flash new ROM with temporary CWM, I am thinking of using it instead of other custom kernel so as not to mess up with my stock kernel.
Click to expand...
Click to collapse
Actually all custom kernels are safe. Just make sure (by reading the instructions) you flash the compatible one.
Philz-kernel for example cannot be used with PAC. Just try the stock kernel. If you don't like it, you can try (for example) Dorimanx kernel.
Donnie Sins said:
Actually all custom kernels are safe. Just make sure (by reading the instructions) you flash the compatible one.
Philz-kernel for example cannot be used with PAC. Just try the stock kernel. If you don't like it, you can try (for example) Dorimanx kernel.
Click to expand...
Click to collapse
So if I want to try different ROMs can Dorimanx do the job for me? And since my device is already rooted do I need to unroot first before flashing new kernel which have rooting functionality?
Sent from my GT-I9100 using xda app-developers app
ssanjy said:
So if I want to try different ROMs can Dorimanx do the job for me? And since my device is already rooted do I need to unroot first before flashing new kernel which have rooting functionality?
Sent from my GT-I9100 using xda app-developers app
Click to expand...
Click to collapse
No you don't need to un-root and like her said.......read the instructions and search forums for specific kernals for specific ROMs. I'm not sure but I don't think dorimanx is compatible with ALL ROMs.
Anyone clarify?
Sent from my GT-I9100 using xda app-developers app
Flashing Kernels
cowen2006 said:
No you don't need to un-root and like her said.......read the instructions and search forums for specific kernals for specific ROMs. I'm not sure but I don't think dorimanx is compatible with ALL ROMs.
Anyone clarify?
Sent from my GT-I9100 using xda app-developers app
Click to expand...
Click to collapse
So just like flashing ROMs we can flash different kernels as per our need simply by installing the respective compatible kernels right?
ssanjy said:
So just like flashing ROMs we can flash different kernels as per our need simply by installing the respective compatible kernels right?
Click to expand...
Click to collapse
True:thumbup:
Restoring to stock
After flashing PACMan version of 4.2.2, if I need to for warranty, can I simply go to CWM recovery and restore previously created backup of my stock ROM?
ssanjy said:
After flashing PACMan version of 4.2.2, if I need to for warranty, can I simply go to CWM recovery and restore previously created backup of my stock ROM?
Click to expand...
Click to collapse
No, you need to do a back up to your pc first using kies preferably.....this will make sure its put back to stock standard for warranty purposes.
I thought s2/i9100's were too old to be warrant'd now?
Error in /emmc/...while flashing Pac Man 4.2
I tried to flash PacMan 4.2 but encountered problem. Posted my issue in this thread but no solution received yet.
Got error message something like
"assert failed get prop ("ro.product.device") == "galaxys2" ||getprop("ro.buil.product")==galaxys2.....Error in /emmc/[file location]....Installation aborted..."
Tried to flash pac_i9100_4.2-milestone.1.release_20130806-205645.zip (MD5sum: 5e569d28ae20c0dbb45c71a212a35ce4)
I searched the forum but some say its problem with CWM recovery and others tell about corrupted file. I downloaded file twice incl previous release of the ROM. I even explored the zipped file and could navigate to most of the folders which I think that suggests that file is fine (no corrupted download).
I used temporary CWM v. 6.0.1.4. Should I try Dorimanx Kernel as the developer of ROM suggests the kernel for the ROM.
I currently have official JB 4.1.2, stock recovery and kernel. GT I9100.
ssanjy said:
I tried to flash PacMan 4.2 but encountered problem. Posted my issue in this thread but no solution received yet.
Got error message something like
"assert failed get prop ("ro.product.device") == "galaxys2" ||getprop("ro.buil.product")==galaxys2.....Error in /emmc/[file location]....Installation aborted..."
Tried to flash pac_i9100_4.2-milestone.1.release_20130806-205645.zip (MD5sum: 5e569d28ae20c0dbb45c71a212a35ce4)
I searched the forum but some say its problem with CWM recovery and others tell about corrupted file. I downloaded file twice incl previous release of the ROM. I even explored the zipped file and could navigate to most of the folders which I think that suggests that file is fine (no corrupted download).
I used temporary CWM v. 6.0.1.4. Should I try Dorimanx Kernel as the developer of ROM suggests the kernel for the ROM.
I currently have official JB 4.1.2, stock recovery and kernel. GT I9100.
Click to expand...
Click to collapse
Use 'Philz' Kernel (tar file for ODIN Flash) to root ur phone and then use its recovery to install any custom rom of ur choice
Sun90 said:
Use 'Philz' Kernel (tar file for ODIN Flash) to root ur phone and then use its recovery to install any custom rom of ur choice
Click to expand...
Click to collapse
I have rooted my device by flashing zip file. And according to Donnie Sins in post#4 in this thread suggested that Philz-kernel cannot be used with PAC. Now I am more confused....:laugh::laugh::good:
ssanjy said:
I have rooted my device by flashing zip file. And according to Donnie Sins in post#4 in this thread suggested that Philz-kernel cannot be used with PAC. Now I am more confused....:laugh::laugh::good:
Click to expand...
Click to collapse
Lol, i said to install 'Philz' kernel so that u can use its recovery to flash PAC after that the 'Philz' kernel will be replaced by the one that comes with the PAC rom for u
PS- alternatively u can flash 'Dorimanx' kernel and use its recovery to flassh PAC rom
Sun90 said:
Lol, i said to install 'Philz' kernel so that u can use its recovery to flash PAC after that the 'Philz' kernel will be replaced by the one that comes with the PAC rom for u
PS- alternatively u can flash 'Dorimanx' kernel and use its recovery to flassh PAC rom
Click to expand...
Click to collapse
I should try Dorimanx then.....Should I use the one for JB/ICS Stock v 8.38 in this link for my device.
ssanjy said:
I should try Dorimanx then.....Should I use the one for JB/ICS Stock v 8.38 in this link for my device.
Click to expand...
Click to collapse
Yes
Sun90 said:
Yes
Click to expand...
Click to collapse
I still am getting "assert failed............(Status 7)
ssanjy said:
I still am getting "assert failed............(Status 7)
Click to expand...
Click to collapse
have u flashed the Dori v8.34 (tar File for ODIN) thro ODIN, if not try the same and see
Sun90 said:
have u flashed the Dori v8.38 (tar File for ODIN) thro ODIN, if not try the same and see
Click to expand...
Click to collapse
I tried to flash it through stock recovery and it said signature verification failed...when I tried it with temporary CWM version it displayed "assert....error!!!"
ssanjy said:
I tried to flash it through stock recovery and it said signature verification failed...when I tried it with temporary CWM version it displayed "assert....error!!!"
Click to expand...
Click to collapse
u cannot flash dori kernel from Stock recovery ma8 , instead Dwnld the V8.34 (.tar extension file ) from dori site and flash the same using 'ODIN' on PC. then reboot ur phone into dori kernel recovery and from there u do all the necessary wipes and install 'PAC' rom as per its install instruction's