Can anyone provide a link to the original bootloader? Kinda confused with all firmwares on Sam mobile. Thanks
I have the red exclamation mark on boot screen. Bootloader XXDLK1 4.1.1
thanks in advance
You need to use triangle away and then flash stock firmware from sammobile, you don't need to change the bootloader
Glebun said:
You need to use triangle away and then flash stock firmware from sammobile, you don't need to change the bootloader
Click to expand...
Click to collapse
thanks brother, can u provide me triangle away link. and after I flash stock rom by pd odin or mobile odin?
You can search for triangle away yourself. Go with pc odin to be sure
Glebun said:
You can search for triangle away yourself. Go with pc odin to be sure
Click to expand...
Click to collapse
thanks bro, I allread find ta 2.40 chainfire n I flase by odin now all r ok. thanks again
Related
Im new to this plz plz help me my firm ware is
pda-lpg/phone:lpx /csc:lp8 (bog)
model gt-19100
android4.0.3
baseband:19100xxlpx
kernal:3.0.15-19100xwlpg-cl619440
build no:iml74k.xwlpg
and plz nay risk in rooting ??
khokhar1 said:
Im new to this plz plz help me my firm ware is
pda-lpg/phone:lpx /csc:lp8 (bog)
model gt-19100
android4.0.3
baseband:19100xxlpx
kernal:3.0.15-19100xwlpg-cl619440
build no:iml74k.xwlpg
and plz nay risk in rooting ??
Click to expand...
Click to collapse
Easiest way to root is to flash a rooted kernel, such as CF-Root kernel.
Here is the thread => http://forum.xda-developers.com/showthread.php?t=1103399&highlight=CF+Root
In Post #8 you will find CF-Root-SGS2_XW_NEE_LPG-v5.5-CWM5.zip which will work fine for your ROM.
Just download this kernel and flash it with Odin to your phone - as described in the first post.
If you want to remove the yellow triangle and reset the flash counter after flashing the CF-Root kernel, just use TriangleAway app from Chainfire (there is a link to it in the first post).
Good luck !
khokhar1 said:
Im new to this plz plz help me my firm ware is
pda-lpg/phone:lpx /csc:lp8 (bog)
model gt-19100
android4.0.3
baseband:19100xxlpx
kernal:3.0.15-19100xwlpg-cl619440
build no:iml74k.xwlpg
and plz nay risk in rooting ??
Click to expand...
Click to collapse
please find the link below read the OP post carefully before u root ur phone
http://forum.xda-developers.com/showthread.php?p=20075898#post20075898
I wrote extended tutorial for you here
custom rom
thanks my phone rooted.As i mentioned above my phone has french rom withbouygues career i want to change this rom .can i totaly change rom with ics 4.04
khokhar1 said:
thanks my phone rooted.As i mentioned above my phone has french rom withbouygues career i want to change this rom .can i totaly change rom with ics 4.04
Click to expand...
Click to collapse
sorry for my poor english
galaxy s2 rooting
przemcio510 said:
I wrote extended tutorial for you here
Click to expand...
Click to collapse
is it poosible to go to previous kernal after rooting?
also if you are planning to use other carrier make sure you have an unlock phone. If not, go to PLay Store and download Galaxy S2 unlock app.
You mean stock kernel? Yes, but only by flashing stock Samsung firmware.
przemcio510 said:
You mean stock kernel? Yes, but only by flashing stock Samsung firmware.
Click to expand...
Click to collapse
That's not true. You can just flash the stock kernel without flashing the entire firmware.
ctomgee said:
That's not true. You can just flash the stock kernel without flashing the entire firmware.
Click to expand...
Click to collapse
+1, kernel is independent of rom, u can always flash the same without any issue as long as its compatible
ctomgee said:
That's not true. You can just flash the stock kernel without flashing the entire firmware.
Click to expand...
Click to collapse
can plz guide me how to do this
Download a stock kernel, flash it in Odin. Not rocket surgery. You got your hand held on the first page & a half of this thread, time for you to do some reading/learning on your own; Stickies.
MistahBungle said:
Download a stock kernel, flash it in Odin. Not rocket surgery. You got your hand held on the first page & a half of this thread, time for you to do some reading/learning on your own; Stickies.
Click to expand...
Click to collapse
Thanks sir i do the same.sir i am just seeking help about the rom which i had on my sgs2 GT-I9100_ICS_4.0.3_BOG_I9100XWLPG_I9100BOGLP8_I9100XXLPX withbouygues france sir i want to replace same rom without any brand.And if i change the rom will i be able to update through kies in future. thanks in advance sir
Hi guys.
Well I was teaching my friend via FB how to use Odin to root his s3, unfortunately he forgot to mention that he was using the 4g version 19305.
So we have flashed the 19300 files on the device using Odin, and now his phone will only boot into download mode I beleive.
I just want to be able to restore his phone to stock, unroot and reset counter.
ANy help is truly appreciated.
Thnk you.
kentykentkent said:
Hi guys.
Well I was teaching my friend via FB how to use Odin to root his s3, unfortunately he forgot to mention that he was using the 4g version 19305.
So we have flashed the 19300 files on the device using Odin, and now his phone will only boot into download mode I beleive.
I just want to be able to restore his phone to stock, unroot and reset counter.
ANy help is truly appreciated.
Thnk you.
Click to expand...
Click to collapse
Why return it to stock? I would recommend flashing an i9305 recovery from Odin then flashing an i9305 pre-rooted ROM via recovery....
However, heres how to return it to stock.
http://forum.xda-developers.com/showthread.php?t=1671969
You need it to boot (With rooted) to be able to reset the counter though. It may not even need resetting yet though. Check download mode for info
rootSU said:
Why return it to stock? I would recommend flashing an i9305 recovery from Odin then flashing an i9305 pre-rooted ROM via recovery....
However, heres how to return it to stock.
http://forum.xda-developers.com/showthread.php?t=1671969
You need it to boot (With rooted) to be able to reset the counter though. It may not even need resetting yet though. Check download mode for info
Click to expand...
Click to collapse
thanks man, I will try.
rootSU said:
Why return it to stock? I would recommend flashing an i9305 recovery from Odin then flashing an i9305 pre-rooted ROM via recovery....
However, heres how to return it to stock.
http://forum.xda-developers.com/showthread.php?t=1671969
You need it to boot (With rooted) to be able to reset the counter though. It may not even need resetting yet though. Check download mode for info
Click to expand...
Click to collapse
Hey man, he is using the 19305 model from Australia.
I just need a link that refers me a site or post that will let me download the Stock rom, or any rom that will allow the s3 to be usable again.
kentykentkent said:
Hey man, he is using the 19305 model from Australia.
I just need a link that refers me a site or post that will let me download the Stock rom, or any rom that will allow the s3 to be usable again.
Click to expand...
Click to collapse
sammobile.com
kentykentkent said:
Hey man, he is using the 19305 model from Australia.
I just need a link that refers me a site or post that will let me download the Stock rom, or any rom that will allow the s3 to be usable again.
Click to expand...
Click to collapse
Best bet to find your firmware is sammobile.com
please guys help me how to fix my samsung GT-19100 after rooting with odin3v1.87 GT-I9100_XXLP6_insecure kernel. when i opening my phone only the start up samsung logo showing with yellow exclamation after that nothing happen its turn off again.. but i can still access the dowloading.. please help me.. thank you in advance...
teejhay said:
please guys help me how to fix my samsung GT-19100 after rooting with odin3v1.87 GT-I9100_XXLP6_insecure kernel. when i opening my phone only the start up samsung logo showing with yellow exclamation after that nothing happen its turn off again.. but i can still access the dowloading.. please help me.. thank you in advance...
Click to expand...
Click to collapse
Dont worry the fact you can get into download mode you should be good. Link below to download stock rom and instructions on how to flash-
http://forum.xda-developers.com/showthread.php?t=1544487
For rooting after go to link below. If you download the zip version it puts CWM and also roots your phone which you can flash from stock recovery so wont need odin. Just make sure you download the version for your filmware ie if your build is xwlsw download the lsw version. Any problems im happy to help.
http://forum.xda-developers.com/showthread.php?t=1877270
teejhay said:
please guys help me how to fix my samsung GT-19100 after rooting with odin3v1.87 GT-I9100_XXLP6_insecure kernel. when i opening my phone only the start up samsung logo showing with yellow exclamation after that nothing happen its turn off again.. but i can still access the dowloading.. please help me.. thank you in advance...
Click to expand...
Click to collapse
flash a secure kernel(safe from emmc brickbug)like siyah,speedmod...etc.
Link to siyah kernel(ICS ver):
http://www.gokhanmoral.com/?p=1536
Link to speedmod kernel:
http://forum.xda-developers.com/showthread.php?t=1574218
P.S they are prerooted.
if the yellow exclamation is a yellow trainge then use traingle away from Chainfire(please thank him if it solves the yellow exclamation problem):
http://forum.xda-developers.com/showthread.php?t=1494114
i hope it helps.
stonedpsycho said:
Dont worry the fact you can get into download mode you should be good. Link below to download stock rom and instructions on how to flash-
http://forum.xda-developers.com/showthread.php?t=1544487
For rooting after go to link below. If you download the zip version it puts CWM and also roots your phone which you can flash from stock recovery so wont need odin. Just make sure you download the version for your filmware ie if your build is xwlsw download the lsw version. Any problems im happy to help.
http://forum.xda-developers.com/showthread.php?t=1877270
Click to expand...
Click to collapse
THANKS.. now my GT-i9100 is back on its original firware so i need to root it.. which firmware compatible to my GT-i91000 my bulid no. is xwlsn? thank you..
teejhay said:
THANKS.. now my GT-i9100 is back on its original firware so i need to root it.. which firmware compatible to my GT-i91000 my bulid no. is xwlsn? thank you..
Click to expand...
Click to collapse
With stocks (original) firmware i would recommend Phillz kernel:
http://forum.xda-developers.com/showthread.php?t=1877270
There you can select the kernel for your version of firmware, and it works really nice for me and my stock rom.
As they told you before, the yellow triangle will be there, i would recommend you not to try to take it because you could heavily break your phone, but if you want to do it anyway here you have the link for triangleaway from Chainfire:
http://forum.xda-developers.com/showthread.php?t=1877270
Hope everything goes well, anything else you need just tell us!
teejhay said:
THANKS.. now my GT-i9100 is back on its original firware so i need to root it.. which firmware compatible to my GT-i91000 my bulid no. is xwlsn? thank you..
Click to expand...
Click to collapse
guys how do i know if my device GT-I9100 is already rooted because after i install PhilZ-cwm6-XWLSN-OXX-4.92.8-signed.zip using apply update from external storage. after rebooting only one icon appear on my screen its name "Superuser" nothing else did my device already rooted? if rooted so how can i customized my phone? sorry cz im just new for this kind of thing.. thank you please can you give me some tutorials how customise my phone.. thank you in advance...:good:
teejhay said:
guys how do i know if my device GT-I9100 is already rooted because after i install PhilZ-cwm6-XWLSN-OXX-4.92.8-signed.zip using apply update from external storage. after rebooting only one icon appear on my screen its name "Superuser" nothing else did my device already rooted? if rooted so how can i customized my phone? sorry cz im just new for this kind of thing.. thank you please can you give me some tutorials how customise my phone.. thank you in advance...:good:
Click to expand...
Click to collapse
As same on the other Thread that you opened. Download a ROOT app like Titanium Backup and if Superuser asks you for ROOT permission ur good...
Hi
Hope someone can point me in the right direction. I've been searching around google and on here and can't find what I need to unroot my Samsung Galaxy S2.
All the links I keep finding to official firmware seems to be broken. Can anyone help?
GT-I9100 - Orange Branded (Unlocked to all networks though)
Thanks in advance for all your help.
jonpwatson5 said:
Hi
Hope someone can point me in the right direction. I've been searching around google and on here and can't find what I need to unroot my Samsung Galaxy S2.
All the links I keep finding to official firmware seems to be broken. Can anyone help?
GT-I9100 - Orange Branded (Unlocked to all networks though)
Thanks in advance for all your help.
Click to expand...
Click to collapse
Go to sammobile.com and in firmware section download the latest firmware of your device of your region. Download it and flash it from Odin. Procedure to flash any Stock rom by odin you can search it on xda there are lots of guides. It's simple by flashin stock rom to unroot your device.
Regards.
Jeetu said:
Go to sammobile.com and in firmware section download the latest firmware of your device of your region. Download it and flash it from Odin. Procedure to flash any Stock rom by odin you can search it on xda there are lots of guides. It's simple by flashin stock rom to unroot your device.
Regards.
Click to expand...
Click to collapse
Thanks!
How do I work out the correct firmware file to download?
jonpwatson5 said:
Thanks!
How do I work out the correct firmware file to download?
Click to expand...
Click to collapse
You first need to register in order to download it. After that just key in the details and download the right firmware as Jeetu said. You can then follow the tutorial on galaxys2root.com to unroot your phone!
Hi guys,
My I9100 has an unresponsive screen and is still under warranty, or would be if it wasn't rooted!
So there's the problem, can I return to stock and do all I need to do to get it fixed under warranty without using the screen?
Thanks in advance!
Al.
alanbuck999 said:
Hi guys,
My I9100 has an unresponsive screen and is still under warranty, or would be if it wasn't rooted!
So there's the problem, can I return to stock and do all I need to do to get it fixed under warranty without using the screen?
Thanks in advance!
Al.
Click to expand...
Click to collapse
Yes you can.
Find a stock fimrware for your region and flash it via odin mode in your device. No need to do anything on the screen.
TheGovernment said:
Yes you can.
Find a stock fimrware for your region and flash it via odin mode in your device. No need to do anything on the screen.
Click to expand...
Click to collapse
u need to use triangle away for clearing root counter
bhavstech said:
u need to use triangle away for clearing root counter
Click to expand...
Click to collapse
Can I use Triangleaway without using the screen? I've tried to install Triangleaway v3.26 through CWM but it fails, I'm running 4.1.2 JB and I've just read I need to be on 4.0 ICS, I downloaded the stock ICS but if I flash that I won't be rooted so won't be able to reset the counter, will it work if I revert to a 4.0 custom ROM to run Triangleaway then go back to stock?
alanbuck999 said:
Can I use Triangleaway without using the screen? I've tried to install Triangleaway v3.26 through CWM but it fails, I'm running 4.1.2 JB and I've just read I need to be on 4.0 ICS, I downloaded the stock ICS but if I flash that I won't be rooted so won't be able to reset the counter, will it work if I revert to a 4.0 custom ROM to run Triangleaway then go back to stock?
Click to expand...
Click to collapse
I've just been reading about a jig for £2 on ebay -
http://www.ebay.co.uk/itm/141065613432?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2649
that will reset the counter on an i9100, do these work?
bhavstech said:
u need to use triangle away for clearing root counter
Click to expand...
Click to collapse
Thanks for the reply, do you know if there's a way to use triangle away without use of the screen?
alanbuck999 said:
Thanks for the reply, do you know if there's a way to use triangle away without use of the screen?
Click to expand...
Click to collapse
you can hit the thanks button instead.No way to clear the counter without using screen
Flash a GB stock rom and use the jig.
theunderling said:
Flash a GB stock rom and use the jig.
Click to expand...
Click to collapse
Does that mean I don't need to be rooted to use the jig?
Thats right.
theunderling said:
Thats right.
Click to expand...
Click to collapse
So I flash a stock Gingerbread ROM using Odin, and then use the rig to reset the counter, sorted! :good:
Cheers,
Al.
Yes..