Hi guys,
My I9100 has an unresponsive screen and is still under warranty, or would be if it wasn't rooted!
So there's the problem, can I return to stock and do all I need to do to get it fixed under warranty without using the screen?
Thanks in advance!
Al.
alanbuck999 said:
Hi guys,
My I9100 has an unresponsive screen and is still under warranty, or would be if it wasn't rooted!
So there's the problem, can I return to stock and do all I need to do to get it fixed under warranty without using the screen?
Thanks in advance!
Al.
Click to expand...
Click to collapse
Yes you can.
Find a stock fimrware for your region and flash it via odin mode in your device. No need to do anything on the screen.
TheGovernment said:
Yes you can.
Find a stock fimrware for your region and flash it via odin mode in your device. No need to do anything on the screen.
Click to expand...
Click to collapse
u need to use triangle away for clearing root counter
bhavstech said:
u need to use triangle away for clearing root counter
Click to expand...
Click to collapse
Can I use Triangleaway without using the screen? I've tried to install Triangleaway v3.26 through CWM but it fails, I'm running 4.1.2 JB and I've just read I need to be on 4.0 ICS, I downloaded the stock ICS but if I flash that I won't be rooted so won't be able to reset the counter, will it work if I revert to a 4.0 custom ROM to run Triangleaway then go back to stock?
alanbuck999 said:
Can I use Triangleaway without using the screen? I've tried to install Triangleaway v3.26 through CWM but it fails, I'm running 4.1.2 JB and I've just read I need to be on 4.0 ICS, I downloaded the stock ICS but if I flash that I won't be rooted so won't be able to reset the counter, will it work if I revert to a 4.0 custom ROM to run Triangleaway then go back to stock?
Click to expand...
Click to collapse
I've just been reading about a jig for £2 on ebay -
http://www.ebay.co.uk/itm/141065613432?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2649
that will reset the counter on an i9100, do these work?
bhavstech said:
u need to use triangle away for clearing root counter
Click to expand...
Click to collapse
Thanks for the reply, do you know if there's a way to use triangle away without use of the screen?
alanbuck999 said:
Thanks for the reply, do you know if there's a way to use triangle away without use of the screen?
Click to expand...
Click to collapse
you can hit the thanks button instead.No way to clear the counter without using screen
Flash a GB stock rom and use the jig.
theunderling said:
Flash a GB stock rom and use the jig.
Click to expand...
Click to collapse
Does that mean I don't need to be rooted to use the jig?
Thats right.
theunderling said:
Thats right.
Click to expand...
Click to collapse
So I flash a stock Gingerbread ROM using Odin, and then use the rig to reset the counter, sorted! :good:
Cheers,
Al.
Yes..
Related
Hi,
Is it safe to flash a stock 2.3.6 firmware (let's say KL1) on a never rooted stock 2.3.4 XWKI4 through Odin?
Thanks.
Yes that it safe.
Lennyz1988 said:
Yes that it safe.
Click to expand...
Click to collapse
Thanks. And thanks for a quick reply. But will it add a number in the Flash Counter.
Thanks.
Yes, but you can erase the flash counter with the jig that costs about £1
Stock roms do not add to custom rom counter .
ROOTING OR CUSTOM ROMS DO stock DOES NOT .
jje
Forsh said:
Yes, but you can erase the flash counter with the jig that costs about £1
Click to expand...
Click to collapse
no........
Intratech said:
no........
Click to expand...
Click to collapse
+1 not on 2.3.6 yet
Ok. Thanks everybody!
Thanks.
Can anyone provide a link to the original bootloader? Kinda confused with all firmwares on Sam mobile. Thanks
I have the red exclamation mark on boot screen. Bootloader XXDLK1 4.1.1
thanks in advance
You need to use triangle away and then flash stock firmware from sammobile, you don't need to change the bootloader
Glebun said:
You need to use triangle away and then flash stock firmware from sammobile, you don't need to change the bootloader
Click to expand...
Click to collapse
thanks brother, can u provide me triangle away link. and after I flash stock rom by pd odin or mobile odin?
You can search for triangle away yourself. Go with pc odin to be sure
Glebun said:
You can search for triangle away yourself. Go with pc odin to be sure
Click to expand...
Click to collapse
thanks bro, I allread find ta 2.40 chainfire n I flase by odin now all r ok. thanks again
Hi guys.
Well I was teaching my friend via FB how to use Odin to root his s3, unfortunately he forgot to mention that he was using the 4g version 19305.
So we have flashed the 19300 files on the device using Odin, and now his phone will only boot into download mode I beleive.
I just want to be able to restore his phone to stock, unroot and reset counter.
ANy help is truly appreciated.
Thnk you.
kentykentkent said:
Hi guys.
Well I was teaching my friend via FB how to use Odin to root his s3, unfortunately he forgot to mention that he was using the 4g version 19305.
So we have flashed the 19300 files on the device using Odin, and now his phone will only boot into download mode I beleive.
I just want to be able to restore his phone to stock, unroot and reset counter.
ANy help is truly appreciated.
Thnk you.
Click to expand...
Click to collapse
Why return it to stock? I would recommend flashing an i9305 recovery from Odin then flashing an i9305 pre-rooted ROM via recovery....
However, heres how to return it to stock.
http://forum.xda-developers.com/showthread.php?t=1671969
You need it to boot (With rooted) to be able to reset the counter though. It may not even need resetting yet though. Check download mode for info
rootSU said:
Why return it to stock? I would recommend flashing an i9305 recovery from Odin then flashing an i9305 pre-rooted ROM via recovery....
However, heres how to return it to stock.
http://forum.xda-developers.com/showthread.php?t=1671969
You need it to boot (With rooted) to be able to reset the counter though. It may not even need resetting yet though. Check download mode for info
Click to expand...
Click to collapse
thanks man, I will try.
rootSU said:
Why return it to stock? I would recommend flashing an i9305 recovery from Odin then flashing an i9305 pre-rooted ROM via recovery....
However, heres how to return it to stock.
http://forum.xda-developers.com/showthread.php?t=1671969
You need it to boot (With rooted) to be able to reset the counter though. It may not even need resetting yet though. Check download mode for info
Click to expand...
Click to collapse
Hey man, he is using the 19305 model from Australia.
I just need a link that refers me a site or post that will let me download the Stock rom, or any rom that will allow the s3 to be usable again.
kentykentkent said:
Hey man, he is using the 19305 model from Australia.
I just need a link that refers me a site or post that will let me download the Stock rom, or any rom that will allow the s3 to be usable again.
Click to expand...
Click to collapse
sammobile.com
kentykentkent said:
Hey man, he is using the 19305 model from Australia.
I just need a link that refers me a site or post that will let me download the Stock rom, or any rom that will allow the s3 to be usable again.
Click to expand...
Click to collapse
Best bet to find your firmware is sammobile.com
Is there any way to FLASH back to "CM9/CM7/STOCK" from "CM11" , without ODIN?
eiPeiDweP said:
Is there any way to FLASH back to "CM9/CM7/STOCK" from "CM11" , without ODIN?
Click to expand...
Click to collapse
No
I dont think its possible
My phone is SM-G925I. it is on 6.0.1. Build number is MMB29K-G925IDVS3EPJ8. I am in australia. I have searched and found that skipsoft toolkit only support rooting upto 5.1.1. So which method should i use to root my phone??
burninghouse said:
My phone is SM-G925I. it is on 6.0.1. Build number is MMB29K-G925IDVS3EPJ8. I am in australia. I have searched and found that skipsoft toolkit only support rooting upto 5.1.1. So which method should i use to root my phone??
Click to expand...
Click to collapse
https://download.chainfire.eu/791/CF-Root/CF-Auto-Root/CF-Auto-Root-zerolte-zeroltedv-smg925i.zip
Just flash cf auto root through odin and boom... rooted easy as that
callumbr1 said:
https://download.chainfire.eu/791/CF-Root/CF-Auto-Root/CF-Auto-Root-zerolte-zeroltedv-smg925i.zip
Just flash cf auto root through odin and boom... rooted easy as that
Click to expand...
Click to collapse
And will i be able to install custom roms after this or i have to install some custom recovery and custom kernel also??
burninghouse said:
And will i be able to install custom roms after this or i have to install some custom recovery and custom kernel also??
Click to expand...
Click to collapse
You will need to flash a custom recovery after. I recommend twrp. Then you can start flashing custom roms.
callumbr1 said:
You will need to flash a custom recovery after. I recommend twrp. Then you can start flashing custom roms.
Click to expand...
Click to collapse
Should i use this one??
http://forum.xda-developers.com/gal...y-official-twrp-galaxy-s6-edge-t3354508/page9
burninghouse said:
Should i use this one??
http://forum.xda-developers.com/gal...y-official-twrp-galaxy-s6-edge-t3354508/page9
Click to expand...
Click to collapse
What model do you have g925....?
callumbr1 said:
What model do you have g925....?
Click to expand...
Click to collapse
I have Galaxy s6 edge.
burninghouse said:
I have Galaxy s6 edge.
Click to expand...
Click to collapse
What model though? G925f? G925i? G925w8?
callumbr1 said:
What model though? G925f? G925i? G925w8?
Click to expand...
Click to collapse
I have g925i
burninghouse said:
I have g925i
Click to expand...
Click to collapse
https://dl.twrp.me/zerolte/
Download the img.tar and flash through odin.
Or root first, then install flashify from play store and you can flash twrp directly from there
callumbr1 said:
https://dl.twrp.me/zerolte/
Download the img.tar and flash through odin.
Or root first, then install flashify from play store and you can flash twrp directly from there
Click to expand...
Click to collapse
Ho can i check that my phone has a locked bootloader or an unlocked bootloader??
callumbr1 said:
https://dl.twrp.me/zerolte/
Download the img.tar and flash through odin.
Or root first, then install flashify from play store and you can flash twrp directly from there
Click to expand...
Click to collapse
Is this safe? Will it surely work? Sorry if it seems a bit awkward but i am asking this because i tried to root my phone about 1 year ago and it was stuck at boot and i have to take it to samsung to fix it for me.
burninghouse said:
Is this safe? Will it surely work? Sorry if it seems a bit awkward but i am asking this because i tried to root my phone about 1 year ago and it was stuck at boot and i have to take it to samsung to fix it for me.
Click to expand...
Click to collapse
Yes it is very safe. It will work for sure. They are very easy to fix also
callumbr1 said:
Yes it is very safe. It will work for sure. They are very easy to fix also
Click to expand...
Click to collapse
Ok just before i flash this file what should i do if i get stuck in boot stage??
burninghouse said:
Ok just before i flash this file what should i do if i get stuck in boot stage??
Click to expand...
Click to collapse
I'm 99% sure you won't get bootloop flashing the auto root. But download stock ROM just in case if this happens just flash the stock ROM. But like I said it's slim chance that this will happen.
The first time you flash cf auto root it may bootloop like 2 times but it is completely normal
callumbr1 said:
I'm 99% sure you won't get bootloop flashing the auto root. But download stock ROM just in case if this happens just flash the stock ROM. But like I said it's slim chance that this will happen.
The first time you flash cf auto root it may bootloop like 2 times but it is completely normal
Click to expand...
Click to collapse
And is there any way to make knox count back to zero after rooting if i wanna sell my phone?
burninghouse said:
And is there any way to make knox count back to zero after rooting if i wanna sell my phone?
Click to expand...
Click to collapse
No, you can reset the flash counter but knox will always be 0x1 (tripped) to be honest not many people or too bothered about knox. I've had my phone in for repair a few times with tripped knox. Samsung never even checked
callumbr1 said:
No, you can reset the flash counter but knox will always be 0x1 (tripped) to be honest not many people or too bothered about knox. I've had my phone in for repair a few times with tripped knox. Samsung never even checked
Click to expand...
Click to collapse
How to reset the flash counter?
burninghouse said:
How to reset the flash counter?
Click to expand...
Click to collapse
When flashing in odin select the option f.reset time. Or use triangle away