Hello
Phone does not recognize the computer
After you install the Roman Donut HD
The program also flash tool to Aataraf phone
I hope the quick fix
ameer96 said:
Hello
Phone does not recognize the computer
After you install the Roman Donut HD
The program also flash tool to Aataraf phone
I hope the quick fix
Click to expand...
Click to collapse
I just ask, what the fu*k is Your question?
Make a choice, won't Your computer recognize the phone or the phone doesn't recognize the PC.
I think You're asking for the first thing, so on Your place I would check if USB debugging is enabled, if You changed the "Roman".
Also don't forget to check for drivers on Your PC.
And please, explain to me what "Aataraf" is.
Definition in the existing phone
And you do restore factory settings
The phone hanging on the word Sony Ericsson
And tried to install the original Roman road
Flash tool but the computer does not recognize the phone
But lighting is blinking when you press the back button
ameer96 said:
Definition in the existing phone
And you do restore factory settings
The phone hanging on the word Sony Ericsson
And tried to install the original Roman road
Flash tool but the computer does not recognize the phone
But lighting is blinking when you press the back button
Click to expand...
Click to collapse
Try SEUS and check the drivers on Your PC.
Besides...
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I tried to re-install the definition but did not work the way
Where the solution
Can you give me your backup in the original rom
is hard do discover what he want to say, but if you cannot connect your phone to PC check if your drivers are installed corretly. Install SE PC Compaion or SEUS. if you want to use flashtool make sure you have ADB Drivers installed ( you should have it in "drivers"folder, and run the setup wizard) and USB Debug is turned on on your phone.
The battery empty, but when connect the phone electricity are not shipping
just connect it and wait few minutes. it should boot up but it will take a while. It is possible that LED indicator is not turned on. just wait cca 30 minutes.
Related
I rooted my phone
I rooted the shell
I issued the commands to adb as per instruction.
Then i got these errors.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
The phone rebooted automatically.
It flashes the android logo for a second and the reboots again.
so now it's stuck in that loop
even seus cannot restore it
Please help!
OmegaRED^ said:
I rooted my phone
I rooted the shell
I issued the commands to adb as per instruction.
Then i got these errors.
The phone rebooted automatically.
It flashes the android logo for a second and the reboots again.
so now it's stuck in that loop
even seus cannot restore it
Please help!
Click to expand...
Click to collapse
Did you try to leave all cables connected, remove battery, hold in the back button and reinsert battery? Should put you back in flash mode.
i think the problem caused as u didnot get ur battery filled more than 50 %
which cause the device java during installation to broke up
plz get the battery out for more than 30 min.
and then connect it while the phone connected to the charger
then remove the chrager and remove the battery again
leave it out for 30 sec. put the battery back wz ur fingure on the back key
and connect the usb cable
to enter flashing mode
flash ur device wz flashtool http://forum.xda-developers.com/showthread.php?t=825675
do not leave the back key , till the loader.sin >>>> flashed and started the another file to be flashed
god wz u
Will try this soon.
I can get into flash mode but Seus cannot identify the phone.
And the flash program hates my pc!! it wont detect the usb port of the device.
Dammit phone still won't flash.
Sorry Tripple post.
It flashed! thank you very much for your help.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Well, KK has a few bugs on this device and I thought about downgrading to JB using LG Flash Tool. At 80% the USB cable just broke and the device just turned off (the battery was at 100%) and I wasn't able to go into Download mode again.
But, when I connect my phone to my pc (through a new USB cable), i can see my phone in Device Manager:
So I suppose the motherboard is not dead.
What can I do to revive it?
Could a JIG or this (I'm asking about this one as I don't have any factory ROM backup, and it will be hard to get one) work?
Fulga666 said:
Well, KK has a few bugs on this device and I thought about downgrading to JB using LG Flash Tool. At 80% the USB cable just broke and the device just turned off (the battery was at 100%) and I wasn't able to go into Download mode again.
But, when I connect my phone to my pc (through a new USB cable), i can see my phone in Device Manager:
So I suppose the motherboard is not dead.
What can I do to revive it?
Could a JIG or this (I'm asking about this one as I don't have any factory ROM backup, and it will be hard to get one) work?
Click to expand...
Click to collapse
....it happens several times in my mt6582 device.....................
try uninstalling usb drivers related to your device using any usb driver uninstaller and then install driver again..................and try......................best of luck...
sinha500 said:
....it happens several times in my mt6582 device.....................
try uninstalling usb drivers related to your device using any usb driver uninstaller and then install driver again..................and try......................best of luck...
Click to expand...
Click to collapse
Try what? I'm not able to get my d686 into download mode, I'm asking if a JIG or THIS will help.
http://forum.xda-developers.com/showthread.php?t=1943442
I've connected my Sony Xperia Z5 Compact ES823 to the computer, but it doesn't detect the device. I've downloaded Xperia_Z5_Compact_driver.zip but no luck.
Here is a picture of device manager in windows 7:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Windows 10 automatically installs the drivers or original ones from Sony work perfectly as well.
scandiun said:
Windows 10 automatically installs the drivers or original ones from Sony work perfectly as well.
Click to expand...
Click to collapse
well to be honest I never used this method to install drivers to my device for couple reasons: ( i do use this method to other devices some times though)
1) there is no need to do this if you are only planning to be able to see the folders and files in your computer (connect in MTP mode) it doesnt require driver -> windows should automatically do it whether its windows 7 or 10. check your wifi or some thing.
2) I use sony PC companion , now they call it "Xperia companion" it installs drivers once you install the EXE file so yah...
try to right click on it and update via windows update (install drivers using windows update option) and if still didnt workout, delete the driver with the warning sign next to it and disconnect your phone and reconnect it again and clean install the drivers.
tell me how does that work out for you
Can you help me with something, i want to put new firmware on phone, what to select or not to select a thing, i want full wipe of everything
pilauda said:
Can you help me with something, i want to put new firmware on phone, what to select or not to select a thing, i want full wipe of everything
Click to expand...
Click to collapse
as you see there are two colums with 2 windows each
left colum is what to wipe
right colum is what is going to be installed
so when flashing ftf you need to wipe every thing which means the left side options should all be ticked in both windows except master reset I guess but once I tried 2 times to tick it and not to tick it, i havent seen any difference but i perfer ticking every thing
I was installing root to my cell phone, the installation everything fine, but when I was installing the original recovery, I accidentally moved the USB cable and it was disconnected, it stayed in the red bar of the flash tool, I gave it in "stop" and try to do it again, now the sp flash tool does not recognize it, but windows recognize the device as "Mediatek DA USB VCOM (Android) (COMX)" where X is a number.
I've read through other topics that keep the Vol+ works, but it does not work with me, or I do not know if I'm doing it right.
I have not removed the battery because I do not know how to open the cell phone.
In the sh flash tool, I use: "Download Only"
Sorry for my english.
EDIT:
I open the phone, quit battery, put again, and sp flash tool detect the device again
leo318x said:
I was installing root to my cell phone, the installation everything fine, but when I was installing the original recovery, I accidentally moved the USB cable and it was disconnected, it stayed in the red bar of the flash tool, I gave it in "stop" and try to do it again, now the sp flash tool does not recognize it, but windows recognize the device as "Mediatek DA USB VCOM (Android) (COMX)" where X is a number.
I've read through other topics that keep the Vol+ works, but it does not work with me, or I do not know if I'm doing it right.
I have not removed the battery because I do not know how to open the cell phone.
In the sh flash tool, I use: "Download Only"
Sorry for my english.
EDIT:
I open the phone, quit battery, put again, and sp flash tool detect the device again
Click to expand...
Click to collapse
How did you manage to open the phone? When I tried it it felt like something was going to break.
MrGoatsy said:
How did you manage to open the phone? When I tried it it felt like something was going to break.
Click to expand...
Click to collapse
I watch the next videos:
To open cellphone: (flat screwdriver and a pair of tweezers, look for a screwdriver as flat as possible, see the images)
https://youtu.be/l-KxuFfv7rk?t=2m26s
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Quit Battery:
https://www.youtube.com/watch?v=4ehYF-zFDAo
I need to get a backup
A samsung tab s3
A question
1. buy a new display for 200.-
2. buy a new phone for 200.- and take the backup for the new phone
3. you can't get a backup without login in your phone, cause the display is broken
You will never get an answer in the samsung forum..
because only absolute professionals have the answer to that
The stupid samsung programmers in china never made a programm not even had an idea that this could happen...
You could unlock your phone at "find my mobile" but regrettably the smart samsung programmers had set every phone with broken dispaly in offline status. In that state it is impossible to reactivate your phone to unlock it
You can restart your pc
You can install kies
You can put 1000 times the usb cabel out and in
You can restart your phone
no chance...nothing your phone keeps offline even when it shows the folder at the windows explorer
The two way verification is for samsung much more important than a backup for the user and that against the background that in 1 billion accounts only 1...
"1" will be hacked
@xda24xx have you tried external keyboard on USB?
Is ADB set in dev options?
Which OS btw?
bmwdroid said:
@xda24xx have you tried external keyboard on USB?
Is ADB set in dev options?
Which OS btw?
Click to expand...
Click to collapse
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
@xda24xx phone's OS
bmwdroid said:
@xda24xx phone's OS
Click to expand...
Click to collapse
You can't connect a mouse or keyboard on this broken android display because you can't see anything. The display is complete dead
At https://findmymobile.samsung.com/#home you can unlock it but
the phone is offline till you login, but you can't login cause display is dead
I could unlock the phone at find my mobile when the battery was fully charged
Now more Problems
1. Smartswitch doesnt work when the phone is in energie save mode
2. Phone is unlocked but the file transfer is not switched on so it shows an empty folder.
3. Kies can't connect the phone no one knows why
4. The ADB drivers old or new can't find a device