[SOLVED ]I bricked my phone, help me :'( - Elephone P9000 Questions & Answers

I was installing root to my cell phone, the installation everything fine, but when I was installing the original recovery, I accidentally moved the USB cable and it was disconnected, it stayed in the red bar of the flash tool, I gave it in "stop" and try to do it again, now the sp flash tool does not recognize it, but windows recognize the device as "Mediatek DA USB VCOM (Android) (COMX)" where X is a number.
I've read through other topics that keep the Vol+ works, but it does not work with me, or I do not know if I'm doing it right.
I have not removed the battery because I do not know how to open the cell phone.
In the sh flash tool, I use: "Download Only"
Sorry for my english.
EDIT:
I open the phone, quit battery, put again, and sp flash tool detect the device again

leo318x said:
I was installing root to my cell phone, the installation everything fine, but when I was installing the original recovery, I accidentally moved the USB cable and it was disconnected, it stayed in the red bar of the flash tool, I gave it in "stop" and try to do it again, now the sp flash tool does not recognize it, but windows recognize the device as "Mediatek DA USB VCOM (Android) (COMX)" where X is a number.
I've read through other topics that keep the Vol+ works, but it does not work with me, or I do not know if I'm doing it right.
I have not removed the battery because I do not know how to open the cell phone.
In the sh flash tool, I use: "Download Only"
Sorry for my english.
EDIT:
I open the phone, quit battery, put again, and sp flash tool detect the device again
Click to expand...
Click to collapse
How did you manage to open the phone? When I tried it it felt like something was going to break.

MrGoatsy said:
How did you manage to open the phone? When I tried it it felt like something was going to break.
Click to expand...
Click to collapse
I watch the next videos:
To open cellphone: (flat screwdriver and a pair of tweezers, look for a screwdriver as flat as possible, see the images)
https://youtu.be/l-KxuFfv7rk?t=2m26s
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Quit Battery:
https://www.youtube.com/watch?v=4ehYF-zFDAo

Related

Computer does not recognize the phone

Hello
Phone does not recognize the computer
After you install the Roman Donut HD
The program also flash tool to Aataraf phone
I hope the quick fix
ameer96 said:
Hello
Phone does not recognize the computer
After you install the Roman Donut HD
The program also flash tool to Aataraf phone
I hope the quick fix
Click to expand...
Click to collapse
I just ask, what the fu*k is Your question?
Make a choice, won't Your computer recognize the phone or the phone doesn't recognize the PC.
I think You're asking for the first thing, so on Your place I would check if USB debugging is enabled, if You changed the "Roman".
Also don't forget to check for drivers on Your PC.
And please, explain to me what "Aataraf" is.
Definition in the existing phone
And you do restore factory settings
The phone hanging on the word Sony Ericsson
And tried to install the original Roman road
Flash tool but the computer does not recognize the phone
But lighting is blinking when you press the back button
ameer96 said:
Definition in the existing phone
And you do restore factory settings
The phone hanging on the word Sony Ericsson
And tried to install the original Roman road
Flash tool but the computer does not recognize the phone
But lighting is blinking when you press the back button
Click to expand...
Click to collapse
Try SEUS and check the drivers on Your PC.
Besides...
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I tried to re-install the definition but did not work the way
Where the solution
Can you give me your backup in the original rom
is hard do discover what he want to say, but if you cannot connect your phone to PC check if your drivers are installed corretly. Install SE PC Compaion or SEUS. if you want to use flashtool make sure you have ADB Drivers installed ( you should have it in "drivers"folder, and run the setup wizard) and USB Debug is turned on on your phone.
The battery empty, but when connect the phone electricity are not shipping
just connect it and wait few minutes. it should boot up but it will take a while. It is possible that LED indicator is not turned on. just wait cca 30 minutes.

[Q] LG d686(MT6577) bricked. Any idea?

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Well, KK has a few bugs on this device and I thought about downgrading to JB using LG Flash Tool. At 80% the USB cable just broke and the device just turned off (the battery was at 100%) and I wasn't able to go into Download mode again.
But, when I connect my phone to my pc (through a new USB cable), i can see my phone in Device Manager:
So I suppose the motherboard is not dead.
What can I do to revive it?
Could a JIG or this (I'm asking about this one as I don't have any factory ROM backup, and it will be hard to get one) work?
Fulga666 said:
Well, KK has a few bugs on this device and I thought about downgrading to JB using LG Flash Tool. At 80% the USB cable just broke and the device just turned off (the battery was at 100%) and I wasn't able to go into Download mode again.
But, when I connect my phone to my pc (through a new USB cable), i can see my phone in Device Manager:
So I suppose the motherboard is not dead.
What can I do to revive it?
Could a JIG or this (I'm asking about this one as I don't have any factory ROM backup, and it will be hard to get one) work?
Click to expand...
Click to collapse
....it happens several times in my mt6582 device.....................
try uninstalling usb drivers related to your device using any usb driver uninstaller and then install driver again..................and try......................best of luck...
sinha500 said:
....it happens several times in my mt6582 device.....................
try uninstalling usb drivers related to your device using any usb driver uninstaller and then install driver again..................and try......................best of luck...
Click to expand...
Click to collapse
Try what? I'm not able to get my d686 into download mode, I'm asking if a JIG or THIS will help.
http://forum.xda-developers.com/showthread.php?t=1943442

Blu life one x

I bricked my Blu life one x and I want to repair it can someone help me out ow to do it and where I can't find the Blu life one x rom?
Download this:
https://www.androidfilehost.com/?fid=24391638059058964
From user @Bad_MOFO_33
Then download the SPFlash tool from here:
http://spflashtool.com/
Then be sure to have usb drivers installed so the COM identifies your phone.
Open the ROM you downladed and extract the carpet into desktop or somewhere you can easily find it.
Open SPFlashtool and go to the DOWNLOAD window and select Scatter-loading and select the scatter file from the folder where the ROM is like this:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Then with the phone turned off (surely is off since its bricked) click the DOWNLOAD button on the spflashtool
And then AFTER you clicked DOWNLOAD on SPFLASHTOOL connect the phone while holding the VOLUME UP and is should identify it and begin the process.
DONT disconect until its done and a BIG GREEN CHECK mark appears, then just unplug and power it on.
ANd thats it
-------------------------------------------
Sorry i dont know why the image is not loading but hopefully the instructions will guide you
Thanks I'm going to try it tomorrow.
Thanks bro... It has worked.... But now I have a different problem... The sim doesn't get recognized.
azazsxsxdcdcfvfv said:
Thanks bro... It has worked.... But now I have a different problem... The sim doesn't get recognized.
Click to expand...
Click to collapse
Might need to repair your IMEI
Follow this guide:
http://sheershbansl.blogspot.mx/2014/08/how-to-fix-invalid-imei-3-methods.html
NOTES:
1.- you IMEI numbers are on the battery sticker theres 2 of em one for sim 1 and the other for sim2
2.-when entering the imei where it say to type AT+ etc etc on our BLU you need to type AT (SPACE) + and the rest, so it looks like AT + and then all the rest (EGMR=1,7,"1234567890")
3.- remember to SET Command and then reset so the IMEI settles in.
Hope thats the problem solver
Thanks for all guys that helped me... The sim problem was my fault cause I messed around with the bands. Like north America and world bands...

Hard Bricked brand new Xiaomi Mi Pad 3. Please help!!

So, I've bought a Xiaomi Mi Pad 3 with a Chinese Rom, and I was following a tutorial to flash a new rom into it.
I basically did the following:
Installed MediaTek Drivers on PC
Opened "Smart Phone Flash Tool"
Specified Download-Agent as DA_SWSEC.bin and Scatter-loading File as the ROM
Unchecked preloader and clicked on "Download"
Connected the Xiaomi Mi Pad 3 to the computer while pressing Volume Down
Then, at this point, the computer crashed with a blue screen of death with the error "BUGCODE_USB_DRIVER". Here is the diagnosis of the error:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
After that, the Mi Pad won't turn on, won't respond to any button and is not recognized by the computer.... I think I might have hard-bricked it.
I've found a tutorial about recovering a Mi Pad 1, but one of the steps is to make a bridge in the SD Card slot, which Mi Pad 3 don't seem to have.
I'm a developer myself, I know my way on things, I have a VM Linux, I'm willing to open the tablet and do whathever it costs to recover it.
Please, what can I do??
Please, anyone?
I FUC*ING RECOVERED MY FUC*ING TABLET. FUC* YEAH!!!!!!!!!!!!!!
I don't know exactly what it was, but I kinda did the following:
- Installed the latest SP Flash tool from spflashtool.com on my PC
- Installed Mi PC Suite for drivers and such
- To help debug, I had a freeware called "Free Device Monitoring Studio", to better understand what's going on on my USB ports
- I was playing a little with the connection/desconnection of the device on my computer, trying to understand how it was. I saw that Kali Linux running under Oracle VM kinda recognized it as a Mediatek device, but couldn't do anything else than that. With that info, my hopes went a little higher, because it wasn't completely dead after all.
- I opened Flash tool, configured it to used the same ROM and files I was using when I bricked it, because I'm pretty sure they weren't the cause of the brick and clicked "Download"
- Then I began messing with the tablet trying to make it be recognized by SP Flash Tool, upon turning it on and off and switching USB ports and connecting them directly to the motherboard USB ports instead of the frontal USB ports
- Then at one point it suddenly recognized and started downloading and flashing the new ROM. I faced some errors but with Format all + Download and having to disconnect/reconnect the batery to make it recognizable again and some little tweaks here and there, it ended up working.
My tablet is working fine now

S905XQ Tomate - *HELP* How to put this *thing* into bootloader mode so I can flash it using USB Burnning Tool? [Pics included]

Hello XDA community! I need help putting this Tomate S905XQ box in bootloader mode so I can flash it using USB Burning tool.
I tried everything without luck.
What I have done so far:
Plugged the USB cable in the PC, hold the visible RESET then UPDATE buttons but unfortunelly, no dice. (Do I have to plug the ac adapter)
Also tried holding the "hidden inside" UPDATE button but also without any luck.
I want to flash Aidan's Custom ROM v9 on this box (1GB/8GB).
Any help is really appreciated, including how to backup this firmware because I haven't found any version on internet.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Try shorting it , the pins are on the chip just above where it says 905x , have the box attached via usb and have the usb burn tool open , get somehing like sim tray tool and one by one place it in between the pins untill it shorts it will connect ...you may or may not need power plugged in and make sure you use the otg usb slot..
Good luck
Thank you very much for your reply! I'll try that on the weekend.
as mentioned above shorting the pins AKA Mask ROM Mode will be your awnser, look at this thread, look for same type of chip as you have (M logo) even if chip aint the same number mask rom mode will probobly (but not always) be the same, there are 2 chips similar to yours in the thread, so try with those 2 first
NAND Chip Mask ROM Mode Short Location - FreakTab
Hi Everyone We have created this thread to collect all the NAND pin Short to Mask ROM Mode locations for all our members. Because firmware comes on android
forum.freaktab.com

Categories

Resources