when i tried to use odin and put the froyo not brick file
i get this error
<ID:0/007> Added!!
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> cache.rfs
<ID:0/007> modem.bin
<ID:0/007> factoryfs.rfs
<ID:0/007> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/007> Removed!!
need help
nvm just tried different usb and got it working
Ok, so i flashed the zimage eugene suggested and the whole sha-bang before flashing the update 6 rom. Tonight i wanted to flash something new so i thought...why not odin? ok so i try to odin and it buggs out on me. so i try again and it fails...this is what i get:
<ID:0/007> Added!!
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> cache.rfs
<ID:0/007> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
any suggestions on how to get my phone up and running again?
Did you try again?
Sent from my Winning Vibrant
many times...with re-partition and without it. when i do choose it re-partition it just stops at DONT TURN OFF TARGET and thats it.
Just keep trying. Try a few different versions of odin. Search around here for them. Odin went nifty on me a few weeks ago. I spent 3+ hours trying before it finally took.
Trigger 2.9.2
as the title say i was rooting my SM-G925i by a rom that i got from here XDA and after it says pass phone stuck and give me that error i googled it and found many solutions and I've tried it all and same thing i downloaded many firmwere and the official one tried to re-root or install another custom room and the same everytime i use odin to flash anyone of it i get the same error fail with this status
<ID:0/007> Added!!
<ID:0/007> Odin engine v(ID:3.1005)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Set PIT file..
<ID:0/007> DO NOT TURN OFF TARGET!!
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> SingleDownload.
<ID:0/007> sboot.bin
<ID:0/007> NAND Write Start!!
<ID:0/007> FAIL!
<ID:0/007>
<ID:0/007> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I can't find i solution for that and i used twrp and it worked and i got pass so normally i got into the recovery mode of twrp but i don't even have the ROM on my mobile to install it so it wont work can any one please tell me how to fix this ?!
Guys, im stuck in "secure check fail: modem" about a day.
Odin is like:
<ID:0/007> Added!!
<ID:0/007> Odin engine v(ID:3.1005)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> SingleDownload.
<ID:0/007> boot.img
<ID:0/007> NAND Write Start!!
<ID:0/007> recovery.img
<ID:0/007> system.img.ext4
<ID:0/007> cache.img.ext4
<ID:0/007> hidden.img.ext4
<ID:0/007> NON-HLOS.bin
<ID:0/007> FAIL! (Auth)
<ID:0/007>
<ID:0/007> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I'm using a more update firmware and I have tried a lot of modems (CP). I dont know what do do and im desperate because dont have money to pay technical assistance right now.
I'm trying to fix my phone about 3 days now.
He suddenly stopped work and after some hard trys it starts to charge again. But unfortunately got stuck on start up. He's boot looping and then Odin is showing this error(while in download mode, of course).
Also when I try to hard reset, show a 'Manual mode' but dont show the options to click and then back to the looping.
HELP????????? (Galaxy s4 GT-i9192 mini Brazil)
Selling my G925F (Galaxy S6 Edge) and it was rooted with CarHD Rom that I used, I wanted to remove this and return it back to stock so I tried doing a few ways to unroot it with much fail, I ended up using the TWRP recovery and wiping absolutely everything...
Now I am in ODIN trying to flash a ROM I found for my phone, its not working. Its either sticking on ConnectionSetup and then telling me WriteError or something..
I am 100% in download mode, I have downloaded the latest SAmsung mobile drivers. Just cant get it to work, whether or not the ROM I am trying to flash is bad I dont know, so I am back on this forum trying other ROMS, even trying other custom ROMS just to get the phone up and running again but it seems the way you flash these ROMS is not via ODIN and that you actually need the phone to be working to do so?
Can anyone help me sort this out please, if this is what classing "bricked" as, please help me unbrick
Dstruct88 said:
Selling my G925F (Galaxy S6 Edge) and it was rooted with CarHD Rom that I used, I wanted to remove this and return it back to stock so I tried doing a few ways to unroot it with much fail, I ended up using the TWRP recovery and wiping absolutely everything...
Now I am in ODIN trying to flash a ROM I found for my phone, its not working. Its either sticking on ConnectionSetup and then telling me WriteError or something..
I am 100% in download mode, I have downloaded the latest SAmsung mobile drivers. Just cant get it to work, whether or not the ROM I am trying to flash is bad I dont know, so I am back on this forum trying other ROMS, even trying other custom ROMS just to get the phone up and running again but it seems the way you flash these ROMS is not via ODIN and that you actually need the phone to be working to do so?
Can anyone help me sort this out please, if this is what classing "bricked" as, please help me unbrick
Click to expand...
Click to collapse
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G925FXXU1AOCY_G925FEVR1AOC1_G925FXXU1AOCW_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1005)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Got a little further, at least it tries to start but now its just constantly failing
<ID:0/003> Added!!
<ID:0/003> Odin engine v(ID:3.1301)..
<ID:0/003> File analysis..
<ID:0/003> Total Binary size: 3564 M
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> NAND Write Start!!
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> cm.bin
<ID:0/003> boot.img
<ID:0/003> recovery.img
<ID:0/003> system.img
<ID:0/003> __XmitData_Write
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Dstruct88 said:
Got a little further, at least it tries to start but now its just constantly failing
<ID:0/003> Added!!
<ID:0/003> Odin engine v(ID:3.1301)..
<ID:0/003> File analysis..
<ID:0/003> Total Binary size: 3564 M
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> NAND Write Start!!
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> cm.bin
<ID:0/003> boot.img
<ID:0/003> recovery.img
<ID:0/003> system.img
<ID:0/003> __XmitData_Write
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
1. Try older / newer version of odin.
1.5 Try to start odin with administrator rights
2. Try different usb cable
3. Try different pc / os
4. Try different rom