Ok, so i flashed the zimage eugene suggested and the whole sha-bang before flashing the update 6 rom. Tonight i wanted to flash something new so i thought...why not odin? ok so i try to odin and it buggs out on me. so i try again and it fails...this is what i get:
<ID:0/007> Added!!
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> cache.rfs
<ID:0/007> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
any suggestions on how to get my phone up and running again?
Did you try again?
Sent from my Winning Vibrant
many times...with re-partition and without it. when i do choose it re-partition it just stops at DONT TURN OFF TARGET and thats it.
Just keep trying. Try a few different versions of odin. Search around here for them. Odin went nifty on me a few weeks ago. I spent 3+ hours trying before it finally took.
Trigger 2.9.2
Related
Hello all sorry if this is in the wrong spot but I can not seem to restore my device.
Was trying to update to the ji5 and was hanging for quite a while at about 13 mins in on cache pc power was lost
phone would then only come up to phone and pc screen
was able to get back into download mode but about 30% into the factoryfs.rfs it fails.
here is the log from odin:
<ID:0/007> Added!!
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/007> Removed!!
<ID:0/007> Added!!
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> cache.rfs
<ID:0/007> modem.bin
<ID:0/007> factoryfs.rfs
<ID:0/007> dbdata.rfs
<ID:0/007> param.lfs
<ID:0/007> zImage
<ID:0/007> cache.rfs
<ID:0/007> modem.bin
<ID:0/007> factoryfs.rfs
<ID:0/007>
<ID:0/007> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
what am I doing wrong?
THis really should be in Q&A ...
Should find help there ....
Just kept tinkering around and fixed it. Was following a bum guide. Only needed in pda section and was putting in all 3
the fact you cant follow instructions like posting in the correct forum leads me to believe it wasn't the "bum" guide that is at fault
**** off people make mistakes queer
stefan.buddle said:
the fact you cant follow instructions like posting in the correct forum leads me to believe it wasn't the "bum" guide that is at fault
Click to expand...
Click to collapse
Sent from my SGH-T959 using XDA App
Cranky cranky on simple mistake of where to post and suddenly I am an idiot huh?
Tone it down.
Does this not say to put in each one.
http://forum.xda-developers.com/showthread.php?t=728698
Thread moved to Q&A.
That guide is fine, though it expects the user to extract the tar into individual parts.
The OP would have been better off following this guide in in the stickied bible thread:
http://forum.xda-developers.com/showthread.php?t=773387
hi I've been trying to fix my tablet for the past week and ive been using odin3 1.85 and i have downloaded the stock firmware for samfirmware or sammobile. finally yesterday i got the firmware to work but on to about 80% it would stop when it gets to Hidden.img and i have been searching for a fix or something that i can do to fix it nonstop already and i have not found anything that can fix this problem and im desperate right because i just want to get my tablet up and running perfectly with the stock rom. please help me ill try anythiing that you would think would for my tablet i do have Teamviewer if you are interested in helping me through there and i do have windows 8 and also tried it on windows 7 but its the same error. please and thank you.
the odin message:
<ID:0/007> Added!!
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> Enter CS for MD5..
<ID:0/007> Leave CS..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> boot.img
<ID:0/007> recovery.img
<ID:0/007> system.img
<ID:0/007> cache.img
<ID:0/007> hidden.img
<ID:0/007>
<ID:0/007> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Hey everyone
Having read many threads on this issue I would appreciate help for my specific case. I got a defective device from a friend that wouldn't start anymore (introductory Samsung animation was playing repeatedly). I then tried to flash "GT-I9100_JB_ClockworkMod-Recovery_6.0.2.9" to eventually install CM 10.1.3 and then factory reset to make sure the brick bug is not an issue. However, I was not able to flash CWM, because it gets stuck at "NAND Write Start" and eventually fails (see below). Interestingly, I flashed another i9100 flawlessly only a few days ago with the exact same setting. Nonetheless I tried different Odin versions as well as different usb ports and cables.
I have no idea what kind of kernel or android version was running on the device and I can now only get into download mode.
When reading this guide I came across two problems. First, flashing a kernel - some other thread recommended "Siyah-s2-v5.0.1" - was unsuccessful. Second, I wasn't sure if I should try to flash the ICS version mentioned in this thread.
Some mentioned falling back to flashing PIT-files, but because recovery mode is not available, I cannot use the "emmc partition scanner" to identify the correct PIT-file to flash.
I would really like to save this device, so someone else may enjoy using it again in the future. Thanks in advance for any help!
Cheers
sNiXx
ODIN 3.09
Code:
<ID:0/005> Added!!
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> zImage
<ID:0/005> NAND Write Start!!
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
ODIN 1.3
Code:
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> zImage
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Removed!!
Could anyone please help me out with this issue? I would appreciate it, if I could get the device running again.
Thanks in advance for help or tips!
as the title say i was rooting my SM-G925i by a rom that i got from here XDA and after it says pass phone stuck and give me that error i googled it and found many solutions and I've tried it all and same thing i downloaded many firmwere and the official one tried to re-root or install another custom room and the same everytime i use odin to flash anyone of it i get the same error fail with this status
<ID:0/007> Added!!
<ID:0/007> Odin engine v(ID:3.1005)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Set PIT file..
<ID:0/007> DO NOT TURN OFF TARGET!!
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> SingleDownload.
<ID:0/007> sboot.bin
<ID:0/007> NAND Write Start!!
<ID:0/007> FAIL!
<ID:0/007>
<ID:0/007> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I can't find i solution for that and i used twrp and it worked and i got pass so normally i got into the recovery mode of twrp but i don't even have the ROM on my mobile to install it so it wont work can any one please tell me how to fix this ?!
Guys, im stuck in "secure check fail: modem" about a day.
Odin is like:
<ID:0/007> Added!!
<ID:0/007> Odin engine v(ID:3.1005)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> SingleDownload.
<ID:0/007> boot.img
<ID:0/007> NAND Write Start!!
<ID:0/007> recovery.img
<ID:0/007> system.img.ext4
<ID:0/007> cache.img.ext4
<ID:0/007> hidden.img.ext4
<ID:0/007> NON-HLOS.bin
<ID:0/007> FAIL! (Auth)
<ID:0/007>
<ID:0/007> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I'm using a more update firmware and I have tried a lot of modems (CP). I dont know what do do and im desperate because dont have money to pay technical assistance right now.
I'm trying to fix my phone about 3 days now.
He suddenly stopped work and after some hard trys it starts to charge again. But unfortunately got stuck on start up. He's boot looping and then Odin is showing this error(while in download mode, of course).
Also when I try to hard reset, show a 'Manual mode' but dont show the options to click and then back to the looping.
HELP????????? (Galaxy s4 GT-i9192 mini Brazil)