My samsung galaxy player 5.0 running Remics Ran out of battery and wouldnt turn on so i connected to my computer and it just looped the battery indicator so i tried to boot into cwm but it gon into download mode so i tried to turn it off and now its has a phone with a ! in the middle to a pc What do i need to do to fix this?!
EDIT!!: I just fixed the galaxy player 5.0 by flashing the orginal tar then charged then installed entropeys kernel
you need to reflash a ROM via Odin or Heimdall, you are in a FORCED download mode.
Flash kernel with odin..but watch what you doing..dont flash in wrong section.
Sent from my Nexus 7 using xda app-developers app
daniel644 said:
you need to reflash a ROM via Odin or Heimdall, you are in a FORCED download mode.
Click to expand...
Click to collapse
Can you tell me the instructions on how to get my player out of force download mode and work? :crying:
Also when i try to use odin i try to flash entropys kernel again but it fails
nhara421 said:
Can you tell me the instructions on how to get my player out of force download mode and work? :crying:
Also when i try to use odin i try to flash entropys kernel again but it fails
Click to expand...
Click to collapse
force download mode is just that, it's forced, the only way out is to flash a ROM using your computer, i'm not familiar enough with the 5.0 to know your ROM choices or if RemICS does any partition conversions (like the CM9's for the 4.0) that would leave needing more advance help.
daniel644 said:
force download mode is just that, it's forced, the only way out is to flash a ROM using your computer, i'm not familiar enough with the 5.0 to know your ROM choices or if RemICS does any partition conversions (like the CM9's for the 4.0) that would leave needing more advance help.
Click to expand...
Click to collapse
Thank you for telling me how to get it out of forced download mode and RemICS dosen't re-partition
_________________________________________________________________________________________________________________________
ಠ_ಠ
Related
http://www.flickr.com/photos/[email protected]/6322322723/sizes/l/in/photostream/
http://www.flickr.com/photos/[email protected]/6322322905/in/photostream/lightbox/
I did a wrong step to flash the kernel!!!After that,when I turn on the GS2,It would show these images.Help!!!!!!!!
Cant see ****. More details are required, else you wont get help anywhere. What steps did you follow?
I was using Cm7.1 before.But many problems in that.Therefore,I wanted to flash official ROM again.But I first flash the ZSKG2 Kernel in My GS2!!!!!I should flash the ROM first!!!!!I click a wrong .tar and now I can't turn on it.
Can I use USB JIG to fix it?Or I need to take it to Samsung to fix it?
Tried doing what it says?
Get a usbjig @ usbjig.com
Can you enter download mode? If so enter download mode and flash a fresh firmware..
Sent from my GT-I9100 using xda premium
I can enter download mode now!!!!!!!!!!!How can I do?
I can't enter recovery mode.Is my recovery broken?
alanngai1997 said:
I can enter download mode now!!!!!!!!!!!How can I do?
Click to expand...
Click to collapse
When you're in download mode you can simply use ODIN to flash a new firmware.
Flash the ZSKG2 ROM in it.After that flash the ZSKS2 Kernel in it?
Basically you can flash any ROM now, just make sure that it's for the SGS II and you're good to go.
Use Odin 1.85 to flash it?
alanngai1997 said:
Use Odin 1.85 to flash it?
Click to expand...
Click to collapse
That's right.
Sent from my GT-I9100 using Tapatalk
First,flash the CMW Kernel?Or direct flash the ZSKG2?
alanngai1997 said:
I can enter download mode now!!!!!!!!!!!How can I do?
Click to expand...
Click to collapse
If you can go to Download mode then search for your official firmware (see here: http://forum.xda-developers.com/showthread.php?t=1075278)
And flash as usual using Odin.
It will bring back your phone to the usual one (without root etc.)
You can flash other official firmwares as well.
Mine was 2.3.3 DXKI2 previously, my country have not released the 2.3.5 officially, so I just took the latest XWKI8 and flashed it.
alanngai1997 said:
First,flash the CMW Kernel?Or direct flash the ZSKG2?
Click to expand...
Click to collapse
Directly flash the firmware will do
After that follow the CF-Root if you want to get your root and CWM back.
The Odin v1.85 is no command when I Click the 'Start' button. What's wrong?
http://www.flickr.com/photos/[email protected]/6325674372/lightbox/
Can I flash the CMW Kernel first?
1)What make is you SGS2, is it korean, european or anything else?
2)Can you or can you not get into download mode using the 3 button combo.
3)You need kies on the PC for the phone to communicate with the PC in download mode. But while running odin, all kies processes have to be stopped via windows taskmanager.
4)Pull out your battery for like 15 to 30 mins and then try again.
I got into download mode with ressurector and flashed froyo with odin it passed but now it does'ent work and then i tried ressurector again but now it's not detecting my device :crying: is there any way to fix it?
You need to install a kernal
Sent from my GenericGinger ROM + Entropy512 Kernal Samsung Galaxy Player 5 U.S. using xda app-developers app
how do i do that
nightfire37 said:
You need to install a kernal
Sent from my GenericGinger ROM + Entropy512 Kernal Samsung Galaxy Player 5 U.S. using xda app-developers app
Click to expand...
Click to collapse
how
You install a kernel the same way you installed the rom. You'll want to download rumirand's kernel here: http://forum.xda-developers.com/showthread.php?t=1414565
Detailed installation instructions are included in that thread.
Oh, and if Odin's not detecting your device, try rebooting your computer. Sometimes odin doesn't end the session properly; and, when that happens, your PC can't talk to the player at all.
cant get on download mode
dstarfire said:
You install a kernel the same way you installed the rom. You'll want to download rumirand's kernel here: http://forum.xda-developers.com/showthread.php?t=1414565
Detailed installation instructions are included in that thread.
Oh, and if Odin's not detecting your device, try rebooting your computer. Sometimes odin doesn't end the session properly; and, when that happens, your PC can't talk to the player at all.
Click to expand...
Click to collapse
cant get on download mode thanks anyway
problem solved
I needed to get an unbrick service from someone on ebay.:victory:
i have galaxy s2 working fine with android 4.0.4 am trying to update to 4.1.2 using stock rom
but when i try to enter download mode this screen come up>> PLEASE HELP
Which key combination you are using?
Sent from my GT-I9100 using XDA Premium 4 mobile app
There's information missing here. If you want help, you need to tell us exactly what you've done to the phone & when.
amincom1 said:
i have galaxy s2 working fine with android 4.0.4 am trying to update to 4.1.2 using stock rom
but when i try to enter download mode this screen come up>> PLEASE HELP
Click to expand...
Click to collapse
So you do not have Download Mode. Thats very confusing. So far as i know Download Mode is embed in Secondary Bootloader and it lookss like SBL has a problem with starting Download Mode. So maybe you need to replace SBL? Its very risky but when you flash stock rom it will happend anyway. Maybe you can try that manually. As long as you dont have access to Download Mode you cant flash rooted kernel but maybe you can flash it from Recovery Mode as update.zip
Hi
I have a Samsung Galaxy Pocket Neo GT-S5310...
The sad thing is that, a while ago it stopped working and now it's stuck on the boot screen (Samsung GALAXY POCKET Neo GT-S5310)
I have tried to perform a factory reset through the built-in recovery mode (volume up + home + power), but unfortunately, I couldn't access the recovery mode and the phone goes directly to the boot screen.
And since the only thing I could do was accessing the Download Mode, so I tried to recover it by installing an official firmware with Odin3_v3.07... but it didn't solve the problem...
So what would you guys suggest?
can't delete this reply... could an admin please do it?
Installing cwn recovery and flash rom
D-Moon said:
Hi
I have a Samsung Galaxy Pocket Neo GT-S5310...
The sad thing is that, a while ago it stopped working and now it's stuck on the boot screen (Samsung GALAXY POCKET Neo GT-S5310)
I have tried to perform a factory reset through the built-in recovery mode (volume up + home + power), but unfortunately, I couldn't access the recovery mode and the phone goes directly to the boot screen.
And since the only thing I could do was accessing the Download Mode, so I tried to recover it by installing an official firmware with Odin3_v3.07... but it didn't solve the problem...
So what would you guys suggest?
Click to expand...
Click to collapse
The only way to :cyclops: the problem is to install cwn recovery and flash another rom .
see this thread to install cwn http://forum.xda-developers.com/showthread.php?t=2728655 ::silly:
and try this rom http://forum.xda-developers.com/poc...om-cm-11-0-galaxy-pocket-neo-duos-gt-t2833952
see this thread to find other rom http://forum.xda-developers.com/showthread.php?t=2731774:p
wipe data then flash the original FIRMWARE
Ashish1998 said:
wipe data then flash the original FIRMWARE
Click to expand...
Click to collapse
How can I wipe data if I can't access the recovery mode... :/
D-Moon said:
How can I wipe data if I can't access the recovery mode... :/
Click to expand...
Click to collapse
hey bro..
:silly: installing cwn recovery via download mode is the only way to bring back ur device
sksenthil said:
hey bro..
:silly: installing cwn recovery via download mode is the only way to bring back ur device
Click to expand...
Click to collapse
actually the only way would be flashing the bootloader, unfortunately I couldn't find it anywhere... the official firmware (from sammobile or samsung-updates) does not contain the bootloader flash...
Download stock from sammobile.com and flash it via Odin
Hackerpunk1 said:
Download stock from sammobile.com and flash it via Odin
Click to expand...
Click to collapse
read my previous reply... :/
D-Moon said:
read my previous reply... :/
Click to expand...
Click to collapse
What are the files in the firmware you downloaded?
Hackerpunk1 said:
What are the files in the firmware you downloaded?
Click to expand...
Click to collapse
S5310XXAMK1_S5310OJVAMK3_S5310XXAME1_HOME.tar.md5
and
SS_DL.dll
Which version of Odin are you using?
Hackerpunk1 said:
Which version of Odin are you using?
Click to expand...
Click to collapse
3.09
Sent from my GT-I9300 using XDA Free mobile app
Just load the file "S5310XXAMK1_S5310OJVAMK3_S5310XXAME1_HOME.tar.md5" ONLY in the PDA section. Please make sure you have the right drivers installed.
stuck in bootloop ...
Hi all, i can't find topic for Samsung s5303, and i have a problem with this device.
someone can help me ?
→ the phone stuck in bootloop ←
- i can start in download mode and get connected in odin.
i had flash all the 12 roms that i have found, (including custom roms and stock roms, only one package/ full package using re-partition with .PIT files. and various kernel models)
i made all wipes, (after and before flash a rom)
when the phone try to boot up, don't appear nothing about
errors (like can't mount data reboot or others...)
the phone try to boot up and keep in samsung logo, after 30 seconds i have a full shutdown, are not possible to turn on using power button..
if i take off the battery and reinsert after 1 minute, phone try to turn on and repeat the same thing
(have happened in all firmwares found)
are a hardware problem ?
may be someone have an idea to fix this issue?
since now, thanks.
Cant boot to recovery
Hi sorry for the thread revival but I have run out of ideas. Same problem as OP. Odin flash is successful but stuck on samsung logo when trying to boot to recovery.
S5310i 4.4.2
Any suggestions would be much appreciated. Anyone found a solution to this?
When you use Odin to flash, when it has finished, it always boot to recovery, there you have to wipe data and cache, then it works properly!
Hackerpunk1 said:
When you use Odin to flash, when it has finished, it always boot to recovery, there you have to wipe data and cache, then it works properly!
Click to expand...
Click to collapse
After flashing recovery with odin I am still stuck at the S5310 Neo splash screen unable to boot into recovery. Has this maybe got something to do with a conflict between android versions? As the S3510i comes with 4.4.2 stock, not 4.1.2.
Did you tried using the pit file for re-partitioning?
Hackerpunk1 said:
Did you tried using the pit file for re-partitioning?
Click to expand...
Click to collapse
Thanks for your help. Could you please explain more about this? Where would I find the pit file to flash? Do I tick re-partition in odin? Never flashed pit before. worried about bricking the device.
I am struggling to find the PIT file for my specific device (S5310i). its only on a handful of websites asking for paid subscriptions. Could anybody possible direct me to where I can find:
CORSICAVE3G_EUR_OPEN. Pit
I have downloaded the corsicass.pit and S5310_corsicass.pit but am not sure if this will work on any S5310 variant?
Hi guys,
my friend accidentally bricked his phone while he was trying to install a new ROM.
It is a Galaxy S4 and he accidentally deleted everything, whice means there is no system and no recovery.
What can I do?
Appreciate any help.
Thanks in advance!
Go Into Download Mode (vol+ and power button i think) and Flash new Rom with Odin
Sent Form A1001 One Plus One Using Tapatalk on CM14 <3
KrYptoNxXx said:
Go Into Download Mode (vol+ and power button i think) and Flash new Rom with Odin
Sent Form A1001 One Plus One Using Tapatalk on CM14 <3
Click to expand...
Click to collapse
I tried it but i am getting an error in Odin.. doesn't Odin need a recovery like TWRP or something to install a ROM?
Adi_vizgan said:
I tried it but i am getting an error in Odin.. doesn't Odin need a recovery like TWRP or something to install a ROM?
Click to expand...
Click to collapse
Odin can work independently in download mode
were you able to go into download mode?
rajat224 said:
Odin can work independently in download mode
were you able to go into download mode?
Click to expand...
Click to collapse
How can I install a ROM from Odin? the ROM is a zip file and Odin doesn't let me choose zip files.
Adi_vizgan said:
How can I install a ROM from Odin? the ROM is a zip file and Odin doesn't let me choose zip files.
Click to expand...
Click to collapse
Odin is for flashing the original firmware from Samsung. You should be able to find it here in the forum for your phone. They usually will post it either in the General or Development sub-forums. If you can't find the exact one you need, then you can check out sammobile.com, though it is usually a pretty slow download. You must use the one for your variant of S4 and can be specific to your carrier or region, depending on which S4 you have. You should only use the same firmware or newer.
odin for samsung
i will recommend try flashing a custom recovery like twrp or philz for flashing a custom rom
flash recovery image using odin or any adb boot type commands
also be device specific when u search for rooting or flashing roms to avoid bricking of the device