Related
hi, i am a newbie...how do we know which ROM to choose?...ROM that wont brick our phone...???
angelaq89 said:
hi, i am a newbie...how do we know which ROM to choose?...ROM that wont brick our phone...???
Click to expand...
Click to collapse
Choose a ROM that is meant for your model of phone.
First thing you should do is check your phone's model number. It will be printed on the label underneath your battery.
If it says GT-i9100, GT-i9100T, GT-i9100P, or GT-i9100M then you're in the right place. Just make sure NOT to use any ROMs from the I9100G subsection.
If it says GT-i9100G, MAKE SURE you ONLY use ROMs from the I9100G subsection, and not from any of the other subsections.
If it says anything else, you're in the wrong Galaxy SII forum (there are several).
First off, do your research. Don't rely on other people to tell you what ROMs to flash, or anything like that. Go read through a few threads on how to root the device, how to flash a custom kernel and a custom ROM. Once you think you've got that, start trying out different ROMs and kernels. Just make sure to stick away from any ROMs that have in their title "LQ5" and you'll be fine -- no brick.
A few recommendations...
ROMs:
CyanogenMod 9 (my personal favourite)
ParanoidAndroid
Resurrection Remix ICS
Kernels:
SiyahKernel
N.E.A.K. ICS
Fluxi ICS
Check the links in my signature for help.
screamworks
screamworks said:
First off, do your research. Don't rely on other people to tell you what ROMs to flash, or anything like that. Go read through a few threads on how to root the device, how to flash a custom kernel and a custom ROM. Once you think you've got that, start trying out different ROMs and kernels. Just make sure to stick away from any ROMs that have in their title "LQ5" and you'll be fine -- no brick.
A few recommendations...
ROMs:
CyanogenMod 9 (my personal favourite)
ParanoidAndroid
Resurrection Remix ICS
Kernels:
SiyahKernel
N.E.A.K. ICS
Fluxi ICS
Check the links in my signature for help.
screamworks
Click to expand...
Click to collapse
Assuming, of course, he actually has an I9100/P/M/T.
ctomgee said:
Assuming, of course, he actually has an I9100/P/M/T.
Click to expand...
Click to collapse
Great point. I had assumed if he had anything else, he would've stated it, but something tells me that's too grand an assumption... :angel:
Dearest OP, as pointed out by ctomgee, if you have anything aside from an I9100/P/M/T, ignore my post.
screamworks
thanks guys,....i have rooted my S2 though....i mean like mine is under DXLP7 kernel version....so anything for i9100 ROM can be installed ??..
angelaq89 said:
thanks guys,....i have rooted my S2 though....i mean like mine is under DXLP7 kernel version....so anything for i9100 ROM can be installed ??..
Click to expand...
Click to collapse
So long as your device is indeed an I9100, yes.
screamworks
hi...its me again....successfully flash CMD9 ROM on my phone....i do a back up in CWM ....if i want to flash back to the oroginal stock ROM...
can i just go back to CWM and do a restore or do i need to use ODIN to flash using the stock ROM...
You should be able to just go into CWM & restore your backup if the backup is of the (rooted, I presume) stock rom.
There is a thread of official stock roms that are flashable with odin so maybe you can check that place out?
Hi S2 user, :angel:
I will buy a new S2 phone soon. I need a little help from you guys. I need to know something about S2 :laugh:
My old phone is Xperia Arc S. This phone need following step to flash kernel and rom.
Kernel:
For flash a new kernel, I need to unlocked the bootloader first. Then this phone can flash any kernel anytime. But unlocking the bootloader will void the warranty.
Rom:
For flash a new rom, as long as the rom does not need to have specific kernel, in other word, stock based rom, no unlocked bootloader required. Just install the CWM and flash the rom.
How about S2 guys? Do I need to unlock something before flash kernel and rom? Can someone explain clearly or likes how I explain my old phone.
p/s- i read in some thread, doing a factory reset in cwm will make S2 brick? hard brick? can't even power on the phone. OMG is it true?
its very scary because in Xperia Arc S, i always flash a new rom. flasholic
I don't want my new S2 brick
I hope you guys can help me. Thanks
faiz5200 said:
Hi S2 user, :angel:
I will buy a new S2 phone soon. I need a little help from you guys. I need to know something about S2 :laugh:
My old phone is Xperia Arc S. This phone need following step to flash kernel and rom.
Kernel:
For flash a new kernel, I need to unlocked the bootloader first. Then this phone can flash any kernel anytime. But unlocking the bootloader will void the warranty.
Rom:
For flash a new rom, as long as the rom does not need to have specific kernel, in other word, stock based rom, no unlocked bootloader required. Just install the CWM and flash the rom.
How about S2 guys? Do I need to unlock something before flash kernel and rom? Can someone explain clearly or likes how I explain my old phone.
p/s- i read in some thread, doing a factory reset in cwm will make S2 brick? hard brick? can't even power on the phone. OMG is it true?
its very scary because in Xperia Arc S, i always flash a new rom. flasholic
I don't want my new S2 brick
I hope you guys can help me. Thanks
Click to expand...
Click to collapse
You don't have to unlock. Just download Odin and flash all the ROMs/kernels you want. As for the cwm brick bug, your phone will only brick if you factory reset through CWM in 4.0.4. In other versions you should be fine.
Sent from my GT-I9100 using xda app-developers app
S2 is the best phone to flash No problem with bootloader lock, you download Odin und happy flashing
Gesendet von meinem GT-I9100 mit Tapatalk 2
preseodymium said:
You don't have to unlock. Just download Odin and flash all the ROMs/kernels you want. As for the cwm brick bug, your phone will only brick if you factory reset through CWM in 4.0.4. In other versions you should be fine.
Sent from my GT-I9100 using xda app-developers app
Click to expand...
Click to collapse
Thanks for your reply. For the brick bug, how come I want to factory reset when flashing new rom? And I think latest firmware for S2 is 4.0.4. Correct me if im wrong.
faiz5200 said:
Thanks for your reply. For the brick bug, how come I want to factory reset when flashing new rom? And I think latest firmware for S2 is 4.0.4. Correct me if im wrong.
Click to expand...
Click to collapse
I am currently installing 4.1.2, unofficial of course
The brick Bug problem by 4.0.4 only with Stock Kernel ! when you have 4.0.4 on your phone you flash a save Kernel (Siyah, Dorimanax .....) with Odin (only Odin not Cwm )
and it was save .After you can flash wath you want
smooth 123 said:
The brick Bug problem by 4.0.4 only with Stock Kernel ! when you have 4.0.4 on your phone you flash a save Kernel (Siyah, Dorimanax .....) with Odin (only Odin not Cwm )
and it was save .After you can flash wath you want
Click to expand...
Click to collapse
I see. So the brick bug actually come from the kernel inside firmware 4.0.4. Not the entire 4.0.4 firmware. Is other custom kernel likes you mention (Siyah, ..) is 100% safe?
faiz5200 said:
I see. So the brick bug actually come from the kernel inside firmware 4.0.4. Not the entire 4.0.4 firmware. Is other custom kernel likes you mention (Siyah, ..) is 100% safe?
Click to expand...
Click to collapse
enjoy ur s2, i just got the s2 and flash over 20 roms like crazy!! jajaja is very good phone
faiz5200 said:
I see. So the brick bug actually come from the kernel inside firmware 4.0.4. Not the entire 4.0.4 firmware. Is other custom kernel likes you mention (Siyah, ..) is 100% safe?
Click to expand...
Click to collapse
100% safe! Her is ohter 100% safe Kernel http://forum.xda-developers.com/showthread.php?t=1877270
for 4.0.4 Stock In this thread you found more to the theme brick bug.
I flash my S2 i don t know:victory: 100× no Problem S2 likes flashing
faiz5200 said:
Thanks for your reply. For the brick bug, how come I want to factory reset when flashing new rom? And I think latest firmware for S2 is 4.0.4. Correct me if im wrong.
Click to expand...
Click to collapse
You factory reset when installing ROMs to make sure there are no errors. Plus with siyah kernels, you can't be 100% sure your phone won't brick when factory reset in CWM. Best is to flash 4.0.3 before doing anything else.
Sent from my GT-I9100 using xda app-developers app
Rooting
Guys.. 1 more question.
When I get my S2, I plan to flash custom rom like aosp or aokp but not stock rom.
Do I need to root my S2 first before flash any rom? Because my Xperia Arc S, I do not need to root because root come inside with the custom rom zip. So when I flash a new rom, my Xperia automatically root. No need to do other step.
I'm curious about this because I see in some thread, talking about cf root or something like that. The thread is very updated. Looks like it very necessary to do it at least once to have root before flash any custom rom.
Please explain for me about this root. Thanks guys.
faiz5200 said:
Guys.. 1 more question.
When I get my S2, I plan to flash custom rom like aosp or aokp but not stock rom.
Do I need to root my S2 first before flash any rom? Because my Xperia Arc S, I do not need to root because root come inside with the custom rom zip. So when I flash a new rom, my Xperia automatically root. No need to do other step.
I'm curious about this because I see in some thread, talking about cf root or something like that. The thread is very updated. Looks like it very necessary to do it at least once to have root before flash any custom rom.
Please explain for me about this root. Thanks guys.
Click to expand...
Click to collapse
I'm not sure about CF root though. Although the ROM I am in now has built in kernels, I still think its best to root first as some ROMs may not have the built in kernel (never searched other ROMs not entirely sure). I might recomment siyah kernel though
Sent from my GT-I9100 using xda app-developers app
preseodymium said:
I'm not sure about CF root though. Although the ROM I am in now has built in kernels, I still think its best to root first as some ROMs may not have the built in kernel (never searched other ROMs not entirely sure). I might recomment siyah kernel though
Sent from my GT-I9100 using xda app-developers app
Click to expand...
Click to collapse
uhh.. So root is come from kernel? Ermm.. so it different than xperia. So if I flash siyah kernel, I do not need to root?
faiz5200 said:
Guys.. 1 more question.
When I get my S2, I plan to flash custom rom like aosp or aokp but not stock rom.
Do I need to root my S2 first before flash any rom? Because my Xperia Arc S, I do not need to root because root come inside with the custom rom zip. So when I flash a new rom, my Xperia automatically root. No need to do other step.
I'm curious about this because I see in some thread, talking about cf root or something like that. The thread is very updated. Looks like it very necessary to do it at least once to have root before flash any custom rom.
Please explain for me about this root. Thanks guys.
Click to expand...
Click to collapse
Some people want to simple root their phone and don't care too much for custom roms and stuff. So for such people, they can simply root their phone using one of the many rooting methods mentioned.
However, if your primary aim is to install a custom rom/ kernel, you can use Odin to flash a custom kernel on your phone. (like siyah, dorimanx, Philz, the list goes on..) and you'll have root. Thereafter you can install a custom rom compatible with the kernel. Earlier on it was simple. Flash siyah or dorimanx and any custom rom will work on it. Kinda like a 'one size fits all' deal. However, right now with new mali drivers etc, some versions of a kernel are reqd based on which rom you plan to install. (JB with new mali drivers or JB without those new mali drivers/ICS)
CF-Root is the method I'd used..but right now it's not recommended, since if you're on certain 4.0.4 firmware, that is susceptible to the emmc brickbug I'm sure you've read about. Siyah, dori, etc kernels are safe.
HAXTREME said:
Some people want to simple root their phone and don't care too much for custom roms and stuff. So for such people, they can simply root their phone using one of the many rooting methods mentioned.
However, if your primary aim is to install a custom rom/ kernel, you can use Odin to flash a custom kernel on your phone. (like siyah, dorimanx, Philz, the list goes on..) and you'll have root. Thereafter you can install a custom rom compatible with the kernel. Earlier on it was simple. Flash siyah or dorimanx and any custom rom will work on it. Kinda like a 'one size fits all' deal. However, right now with new mali drivers etc, some versions of a kernel are reqd based on which rom you plan to install. (JB with new mali drivers or JB without those new mali drivers/ICS)
CF-Root is the method I'd used..but right now it's not recommended, since if you're on certain 4.0.4 firmware, that is susceptible to the emmc brickbug I'm sure you've read about. Siyah, dori, etc kernels are safe.
Click to expand...
Click to collapse
I see. Thanks. Flash kernel using odin. I see in this thread http://forum.xda-developers.com/showthread.php?t=1125282 , he said flashing a kernel is same like flashing a custom rom which is in CWM. Flash kernel in CWM? I thought the only way is using odin.
faiz5200 said:
I see. Thanks. Flash kernel using odin. I see in this thread http://forum.xda-developers.com/showthread.php?t=1125282 , he said flashing a kernel is same like flashing a custom rom which is in CWM. Flash kernel in CWM? I thought the only way is using odin.
Click to expand...
Click to collapse
For S2 we can. Because it won't increase your flash counter. But I never tried flashing through CWM.
Sent from my GT-I9100 using xda app-developers app
faiz5200 said:
I see. Thanks. Flash kernel using odin. I see in this thread http://forum.xda-developers.com/showthread.php?t=1125282 , he said flashing a kernel is same like flashing a custom rom which is in CWM. Flash kernel in CWM? I thought the only way is using odin.
Click to expand...
Click to collapse
There are two ways of flashing a kernel.
1. Use the .tar version of the kernel and flash via Odin
(the same way you'd flash the cf-root kernel you'd mentioned in a post above. I'll assume you know the steps as they're mentioned in chainfire's post. Or there are many posts on that topic)
Advantages: tried and tested route, simple one step method. You're rooted and have a custom kernel in about 30 secs.
Disadvantage: You rely on Odin and the connection to your computer which some don't trust. Increases flash counter.
2. Use the .zip version of the kernel and flash via CWM.
Since in this case you need CWM to start off with, you can use Rachmat3's method described HERE to get temporary CWM first.
Advantages: No computer needed. Everything happens through your phone. Flash counter isnt increased.
Disadvantages: Can be a little finicky at times..but you'll get there eventually. Involves 2 steps. First get temporary CWM, then install custom kernel via cwm.
You can start off with a very popular kernel. Gokhanmoral's siyah kernel.Both the zip and tar versions are available downloadable from HERE
HAXTREME said:
There are two ways of flashing a kernel.
1. Use the .tar version of the kernel and flash via Odin
(the same way you'd flash the cf-root kernel you'd mentioned in a post above. I'll assume you know the steps as they're mentioned in chainfire's post. Or there are many posts on that topic)
Advantages: tried and tested route, simple one step method. You're rooted and have a custom kernel in about 30 secs.
Disadvantage: You rely on Odin and the connection to your computer which some don't trust. Increases flash counter.
2. Use the .zip version of the kernel and flash via CWM.
Since in this case you need CWM to start off with, you can use Rachmat3's method described HERE to get temporary CWM first.
Advantages: No computer needed. Everything happens through your phone. Flash counter isnt increased.
Disadvantages: Can be a little finicky at times..but you'll get there eventually. Involves 2 steps. First get temporary CWM, then install custom kernel via cwm.
You can start off with a very popular kernel. Gokhanmoral's siyah kernel.Both the zip and tar versions are available downloadable from HERE
Click to expand...
Click to collapse
Another disadvantage of "not using" odin is when you cant enter cwm.
I use cwm and mobile odin.I flashed a kernel and couldnt access cwm nor phone would boot.
So I had to fix it using my pc via odin.
I just successfully rooted my phone using the DooMLoRD method. I wan't to use a Jellybean custom rom(probably aokp). What kernel do I need? I have a Galaxy S2 with version 2.3.4 and gingerbread.uckh7.
You need one with cwm baked in. It's that simple. The rom you select will flash the recommended kernel
Sent from my Galaxy Nexus
aknbad23 said:
I just successfully rooted my phone using the DooMLoRD method. I wan't to use a Jellybean custom rom(probably aokp). What kernel do I need? I have a Galaxy S2 with version 2.3.4 and gingerbread.uckh7.
Click to expand...
Click to collapse
All roms will automatically flash an appropriate kernel.
dsmboost said:
All roms will automatically flash an appropriate kernel.
Click to expand...
Click to collapse
Ok, but don't I need to backup my phone(contacts,apps,etc) with CWM recovery before I put a ROM on it? That would mean I need a CWM kernel right?
aknbad23 said:
Ok, but don't I need to backup my phone(contacts,apps,etc) with CWM recovery before I put a ROM on it?
Click to expand...
Click to collapse
These are really basic and common questions that you are asking and can be easily found by searching. I'm just giving you a fair warning, because you will be flamed by others for not searching.
Creating backups via CWM is not a requirement to flash anything. It is highly recommended that you do create backups though (especially if you're new to this), in case something goes wrong while flashing stuff.
dsmboost said:
These are really basic and common questions that you are asking and can be easily found by searching. I'm just giving you a fair warning, because you will be flamed by others for not searching.
Creating backups via CWM is not a requirement to flash anything. It is highly recommended that you do create backups though (especially if you're new to this), in case something goes wrong while flashing stuff.
Click to expand...
Click to collapse
Thanks.
And with that, i will close this here, and advise further searching in the future (if you are willing to do something that can hose your phone, please take 10 minutes, and read the basic guides on what to do... it will be a life saver..)
Hey XDA !
I've just installed the 4.0.4 ROM from Free (French operator), and I'd like to root it. I tried to with the non-PC solution, but it failed (no service). I learned that I had luck that my phone didn't brick. So, I'd like to know how to root it, and install CM10 on it (I tried to install CM10 too, but I had a keyboard issue on every ROM, and I don't think it came from the ROM itself).
So, how do I do it ?
Thanks
iSteelZ
flash siyah 4.1.5 kernal to give you dual boot cqapability then follow instructions in the cm 10.
there are numerious threads on dual booting in this forum.
Do I have to keep dual boot ? Can't I just have CM10 ?
iSteelZ said:
Do I have to keep dual boot ? Can't I just have CM10 ?
Click to expand...
Click to collapse
Yes.
Just flash the kernel then factory wipe and install your rom via recovery.
This is same process as any other flash, these "how do I flash" threads are silly and have no purpose as they already exist in abundance if you would look and read stickies/guides etc.
I know it must be very boring to always see posts like mine, but I already bricked my phone, I don't know how, and I don't find any topic on how to install it, only on Galaxy Note.
And my version is the LQ2, not the LQ6 (this is my modem).
iSteelZ said:
I know it must be very boring to always see posts like mine, but I already bricked my phone, I don't know how, and I don't find any topic on how to install it, only on Galaxy Note.
And my version is the LQ2, not the LQ6 (this is my modem).
Click to expand...
Click to collapse
Not only boring, but it's against the rules, because if you search a bit better there actually are guides for rooting, also via google if you can't find them on xda.
Sent from the Matrix
You are right, I looked on google for Siyah Kernel and I found the right one.
Sorry
Wish i posted the thread in the right place.
I have gt-i9300 and want to root it.
Here are some questions=
Q1. In which process of flashing i am modifying my bootloader? (while flashing cwm, kernal etc..)
Q2. When i flash stock ROM through Odin, do i restore the kernal, recovery and the flash counter?
Q.3 Is flashing a ROM after root is a risky thing?
Q.4 Can I flash a rom directly after rooting and flashing CWM? (without changing kernal?)
Q5. What is kernal compatibility? like some kernals are JB only. And does every ROM contains it's own kernal?
Q6. Is there a way to root and get cwm without getting the stupid yellow triangle?
:angel:
start by reading rootSU's guide - http://forum.xda-developers.com/showthread.php?t=2362743
root
eatsleep said:
Wish i posted the thread in the right place.
I have gt-i9300 and want to root it.
Here are some questions=
Q1. In which process of flashing i am modifying my bootloader? (while flashing cwm, kernal etc..)
Q2. When i flash stock ROM through Odin, do i restore the kernal, recovery and the flash counter?
Q.3 Is flashing a ROM after root is a risky thing?
Q.4 Can I flash a rom directly after rooting and flashing CWM? (without changing kernal?)
Q5. What is kernal compatibility? like some kernals are JB only. And does every ROM contains it's own kernal?
Q6. Is there a way to root and get cwm without getting the stupid yellow triangle?
:angel:
Click to expand...
Click to collapse
hallo im also new to rooting but flashed cm10.1 yesterday with root and can share what i did.
i also got i9300 nordic version of the s3. and downloaded some files
odin 3.07
cfroot 3.64
cm10.1
gapps from 03-2013
i resettet my phone and enabled USB debugging and put the phone in download mode and startet up odin and made sure its connected and loaded cfroot.tar and flashed and the phone rebootet itself and installed the ness. apps for rooting. then i bootet up in recovery manager and went to install from sdcard and installed cm10.1 and then gapps and then did factory reset and dalvik wipe and rebootet and it bootet up CM10.1 and deleted /0 folder on the phone which was empty folder from previous touchwiz samsung rom
and yes there are risks but i did this 2 times. tw to cm10 and then back again but everything went problem free. so the risk ppl are talking about is mostly likely cuz some broke and if u mess up it breaks. so it can happen.
q1; when u flash cfroot the bootloader changed and it changes counter from 0 to 1.
q2: when u flash stock back with odin it flashes rom and bootloader/recovery but counter is the same but can be fixed easily. ( did it myself between my 2 flashes so when i flashed back to CM10 it still was on 1
q3: i think its everything thats risky. dont think root and rom flashing are more risky than others
q4: dont know what u mean exactly. i didnt mess with kernals. CM10.1 has a good one i think.
q5: dont either
q6: i dont have any yelly triagle on my cfroot+cm10.1. theres a lille read thing in the left corner like 2mm long that shows u got flashed.
hope it helps.
q6 = Triangle Away https://play.google.com/store/apps/details?id=eu.chainfire.triangleaway
TimGrundy2012 said:
q6 = Triangle Away https://play.google.com/store/apps/details?id=eu.chainfire.triangleaway
Click to expand...
Click to collapse
Unless you have 4.1.1 + bootloader.
mikep99 said:
start by reading rootSU's guide - http://forum.xda-developers.com/showthread.php?t=2362743
Click to expand...
Click to collapse
Useful info, read it all but still answers are not obtained
and also i need a kernal for both AOSP and Samsung roms which i can't find
eatsleep said:
Useful info, read it all but still answers are not obtained
and also i need a kernal for both AOSP and Samsung roms which i can't find
Click to expand...
Click to collapse
For kernels that support both go here or here. At the moment Siyah or Goggy Max are the people's choices I assume.
Q.3 Is flashing a ROM after root is a risky thing?
Any flashing involves risk from almost no risk to a much bigger risk for those that dont read the basics and follow instructions .
Root voids warranty .
Q5. What is kernal compatibility? like some kernals are JB only. And does every ROM contains it's own kernal?
yes and yes .
Q2. When i flash stock ROM through Odin, do i restore the kernal, recovery and the flash counter?
NO read the basic faqs and guides all stickied .
Q.4 Can I flash a rom directly after rooting and flashing CWM? (without changing kernal?)
YES
and also i need a kernal for both AOSP and Samsung roms which i can't find
IT is inside the rom .
I suggest you bother to read the faqs and guides or join the help i bricked my phone club .
jje
eatsleep said:
Wish i posted the thread in the right place.
I have gt-i9300 and want to root it.
Here are some questions=
Q1. In which process of flashing i am modifying my bootloader? (while flashing cwm, kernal etc..)
Q2. When i flash stock ROM through Odin, do i restore the kernal, recovery and the flash counter?
Q.3 Is flashing a ROM after root is a risky thing?
Q.4 Can I flash a rom directly after rooting and flashing CWM? (without changing kernal?)
Q5. What is kernal compatibility? like some kernals are JB only. And does every ROM contains it's own kernal?
Q6. Is there a way to root and get cwm without getting the stupid yellow triangle?
:angel:
Click to expand...
Click to collapse
1. You can flash boooader separately or when you flash stock roms. (I can be wrong but this is what I know)
2. I never done that but yes for first two, not sure about flash counter, you may still have to clear them with TA first.
3. As above answer, it's always risky to do stuff without proper knowledge and no guarantees even after proper knowledge but mostly no.
4. Yes.
5. Kernels are essential part of your phone and they are compatible with your os version only and also ur phone model. So if a kernel is for s3 4.2.2, you can't flash it over to amy other model or os version. Yes for second part.
6. No. Triangle away may remove your flashing counter but as long as you have custom anything and your rom status is modified that triangle will be there.
Sent from my GT-I9300 using Tapatalk 2
chrismast said:
For kernels that support both go here or here. At the moment Siyah or Goggy Max are the people's choices I assume.
Click to expand...
Click to collapse
look, the question i am trying to ask is that can i flash aokp Rom over Siyah's kernal ( siyah's kernal is samsung kernal) what will happen?
Will i Brick my phone?
And if every ROM has it's own kernal so every new rom will replace my old kernal??
How to keep my prev kernal?
Thanks in advance :highfive:
eatsleep said:
look, the question i am trying to ask is that can i flash aokp Rom over Siyah's kernal ( siyah's kernal is samsung kernal) what will happen?
Will i Brick my phone?
And if every ROM has it's own kernal so every new rom will replace my old kernal??
How to keep my prev kernal?
Thanks in advance :highfive:
Click to expand...
Click to collapse
Siyah supports both cm and stock. Yes, you cam flash cm over stock or siyah kernel.
You have to flash your kernel again after every rom flash.
Sent from my GT-I9300 using Tapatalk 2
eatsleep said:
look, the question i am trying to ask is that can i flash aokp Rom over Siyah's kernal ( siyah's kernal is samsung kernal) what will happen?
Will i Brick my phone?
And if every ROM has it's own kernal so every new rom will replace my old kernal??
How to keep my prev kernal?
Thanks in advance :highfive:
Click to expand...
Click to collapse
As long as the rom comes with a kernel, which is the normal base, you have to flash the kernel again. Usually you can do this direct from recovery before the full reboot.
As long as the kernel supports your rom type (see each kernel's thread for it), you should be fine as long as you follow the instructions.
chrismast said:
As long as the rom comes with a kernel, which is the normal base, you have to flash the kernel again. Usually you can do this direct from recovery before the full reboot.
As long as the kernel supports your rom type (see each kernel's thread for it), you should be fine as long as you follow the instructions.
Click to expand...
Click to collapse
Okay, probably the last post.
How to flash googy max kernal on galaxy s3 i9300?
Can i flash any 4.1.2 rom (aosp like miui or aokp etc) on googy max,
and in which process is the bootloader modified?
eatsleep said:
Okay, probably the last post.
How to flash googy max kernal on galaxy s3 i9300?
Can i flash any 4.1.2 rom (aosp like miui or aokp etc) on googy max,
Click to expand...
Click to collapse
bootloader no clue, I never touched it, too dangerous to mess up stuff.
for flashing googy, usually you do it in CWM or via Odin. Check out the thread and read the instructions. Syiah's thread also got a huge amount of guides in the first couple of posts and they should be valid somehow for Googy as well as it is based on Siyah.
eatsleep said:
Okay, probably the last post.
How to flash googy max kernal on galaxy s3 i9300?
Can i flash any 4.1.2 rom (aosp like miui or aokp etc) on googy max,
and in which process is the bootloader modified?
Click to expand...
Click to collapse
Please do not start messing with bootloaders .
Logic says read the instructions for the kernel you want to flash .
Its a CWM file and flashed via recovery .
You really should bother yourself to read the basic faqs and guide .
jje
eatsleep said:
Okay, probably the last post.
How to flash googy max kernal on galaxy s3 i9300?
Can i flash any 4.1.2 rom (aosp like miui or aokp etc) on googy max,
and in which process is the bootloader modified?
Click to expand...
Click to collapse
The bootloader isn't modified. The bootloader *shows* modified by reading other data.
Sent from my GT-I9300 using Tapatalk 4 Beta