Recovery installed on cyanogen mod 7 and the phone will not boot on the Motorola logo should help restore...
How safe? by ezSBF or RSD lite and in both cases I lose operator number and I need to re-connect?
try wiping cache and or data in android recovery
or flash sbf with ezSBF for dx2
link in my list
sd_shadow's list of links for Droid FAQs, SBF, Rooting, ROMs.... https://docs.google.com/document/d/1Goawxdx_UBF4Y8lqzHYWf8Ha3yUcRK4faq0UWIlXLWA/edit
Sent from my XT862 using xda premium
miui
Install miui forget install gapps and dontknow how install in bsr not inter.
sd_shadow said:
apshel said:
How to install gapps miui bsr not enter (
Click to expand...
Click to collapse
I haven't use miui, but would think you need 'cm7 bsr'
look for it in cm7 thread, not sure which gaaps should be used
Click to expand...
Click to collapse
use cm7 bsr
miui
im use dragonzkiller cm7 bsr make reboot in recovery phine reboot and shutdown
connect to charger
miui
everything as the instructions flash the phone but forgot to set the market and slashing when I go to the phone reboots almost BSR launches its screen distortion and light off and all
I would sbf, verify rom's md5 checksum, and reflash rom
Related
I was on eclipse 5. I wanted to update to v6 so I got an gingerbread SBF file and used rsd lite to flash it. Now I get bootloop. :/
TransX2 said:
I was on eclipse 5. I wanted to update to v6 so I got an gingerbread SBF file and used rsd lite to flash it. Now I get bootloop. :/
Click to expand...
Click to collapse
Boot into stock recovery and do a factory reset.
Sent from my DROID X2 using Tapatalk
post above, he is correct just boot into the android recovery and factory reset it should boot up after that
TransX2 said:
I was on eclipse 5. I wanted to update to v6 so I got an gingerbread SBF file and used rsd lite to flash it. Now I get bootloop. :/
Click to expand...
Click to collapse
For future reference, you didn't need to SBF between - totally unnecessary. Wipe data/cache and install.
Sent from my DROID X2 using xda premium
When one hold the power and both volumes down, before reboot, the motorola symbol comes up with "starting RSD protocol support" above it. what is that? I have bricked my phone while attempting flash a theme. I went into bootstrap recovery and was able to do a factory reset, but unfortunately it didn't work and the phone wull not reboot, nor will it connect through usb to the pc. HELP
I may be wrong but you might have to SBF back to stock. There is a how to in the development thread I believe.. but be calm, it is fixable.
I'm having trouble flashing Joker's CM9 to my Photon. I followed the instructions here to root, unlock, and install clockworkmod to the phone. Then I followed Joker's instructions to install the ROM, as well as referencing this video.
After flashing the ROM, the phone sits on the red Motorola logo and doesn't go any further... I've waited about 10 minutes.
To review the steps I took to install the ROM:
1. Boot into recovery
2. Format /system
3. Factory reset
4. Reboot recovery
5. Flash joker's zip
6. Flash gapps
7. Reboot
8. Sits on Motorola logo
9. Repeat steps 1-7
10. Still sits on Motorola Logo
Any ideas? I'm sure there's something obvious here, but I'm not seeing it.
Thanks in advance!
Justin
Which rom were you coming from and which version of cwm were u using?
Sent from my MB855 using xda premium
Good questions. I came from the stock ROM. And I had used Rom Manager to update to the latest version of clockworkmod (5.0.2.8).
JustinHoMi said:
Good questions. I came from the stock ROM. And I had used Rom Manager to update to the latest version of clockworkmod (5.0.2.8).
Click to expand...
Click to collapse
The version is CWM that ROM Manager flashes isn't yet comparable with CM7, gonna have to go back to 5.0.2.7.
Sent from my 1.3 OC'd CM7.2 Electrify.
When you say it's not compatible with CM7, I assume that applies to CM9 also?
JustinHoMi said:
When you say it's not compatible with CM7, I assume that applies to CM9 also?
Click to expand...
Click to collapse
My bad, I meant CM9, not CM7. afaik CM7 flashes fine with it, I haven't heard/read any different.
Sent from my 1.3 OC'd CM7.2 Electrify.
Koush missed a few things in his cwm. For now use romracers cwm
Sent from my MB860 using XDA App
That was it. I flashed 5.0.2.7 and all is well. Thanks!
Hi everyone!
I am trying to flash cm9 with CWM v5.0.2.8, but the phone gets stuck while booting. Before flashing I wipe everything (dalvik cache, cache, data, battery stats), and format the system, and still I am getting stuck while booting again and again. I see a screen with a red circle with M inside it, the text under it is "dual core technology", and the text in the top - "unlocked". I can wait and wait but nothing happens. the only choice is to restore to the stock rom. My device is rooted and unlocked.
I Tried to use the previous version of CWM, but after I flash it with rom manager the recovery gets unreadable. I go into the recovery mode and see unreadable lines of text.
Please help me! I'm tired of unplugging and plugging the battery again and again..
Thank you!
Forgot to say:
I tried to flash the file "beta-0.2.0-cm-9.0.0-RC0-Sunfire-KANG-signed.zip".
Should I have flashed any special kernel?
yairku said:
Hi everyone!
I am trying to flash cm9 with CWM v5.0.2.8,!
Click to expand...
Click to collapse
Bold part is the problem. For some reason the newest version of CWM results in a stuck boot with CM9 for the photon. You need 5.0.2.7 (or below I'd assume).
Go here and grab the CWM that is posted and flash that.
Thanks. How do I flash a recovery? RSD lite is good?
Edit: I tried to use bootstrap, but it doesn't boot into recovery but into android. So how do I flash the "old" version of CWM?
yairku said:
Thanks. How do I flash a recovery? RSD lite is good?
Edit: I tried to use bootstrap, but it doesn't boot into recovery but into android. So how do I flash the "old" version of CWM?
Click to expand...
Click to collapse
Flash it through the version you have 5.0.2.8
Sent from my MB855 using Tapatalk
bricky23 said:
Flash it through the version you have 5.0.2.8
Sent from my MB855 using Tapatalk
Click to expand...
Click to collapse
OR use the moto-fastboot method which is simple too.
Thanks for the help! I managed to flash the recovery, and then I successfully flashed the cm9! Thank you!
yairku said:
Thanks. How do I flash a recovery? RSD lite is good?
Edit: I tried to use bootstrap, but it doesn't boot into recovery but into android. So how do I flash the "old" version of CWM?
Click to expand...
Click to collapse
I'll be honest this is why I don't like rom manager
Good practice should be to do everything as "manually" as possible first, then consider using apps like rom manager to speed up these tasks.
Hi all.
I bricked my gsm (italian) razr.
I would like to install last miui, so I installed cwm recovery.
Everything ok, i choose zip from sdcard and then bootloop with miui logo.
So I have to ask: how can i choose recovery mode (to select the restore mode)?
Of course i had a backup first, but how can now restore it?
Now razr is a brick.
Please help me.
Tx in advance.
A razr-noob, ex hd2-expert.
are you using safestrap or bootstrap recovery? a bootloop is not bricked. restart your phone and see if recovery pulls up. if not you will have to enter fastboot mode and flash back to stock, re-root and start over.
iperv said:
Hi all.
I bricked my gsm (italian) razr.
I would like to install last miui, so I installed cwm recovery.
Everything ok, i choose zip from sdcard and then bootloop with miui logo.
So I have to ask: how can i choose recovery mode (to select the restore mode)?
Of course i had a backup first, but how can now restore it?
Now razr is a brick.
Please help me.
Tx in advance.
A razr-noob, ex hd2-expert.
Click to expand...
Click to collapse
Ciao!
Flash a stock rom and don't use CWM which is not working.
1. First, flash a stock system with RSD lite (this one)
2. Then you'll be able to charge your razr and update your system to something newer.
Cheers
Tank's a lot, guys.
I'm offline all day long 'cause my internet went from razr...
Thanks for your replies, i'll now study what i have to do.
pedrotorresfilho said:
Ciao!
Flash a stock rom and don't use CWM which is not working.
1. First, flash a stock system with RSD lite (this one)
2. Then you'll be able to charge your razr and update your system to something newer.
Cheers
Click to expand...
Click to collapse
Ok.
Tx to your link, i learn some tips for motorola, expecially the one that i can to wipe data and cache by stock recovery.
so, i wiped data and cache and reboot and magically miui started in a few seconds!
So:
1) Thank you so much for your links;
2) CWM it's ok now, ihave it on my phone.
I also downloaded rsdlite...
Hi all.
Just a bit not so much noob of razr.
iperv said:
Ok.
Tx to your link, i learn some tips for motorola, expecially the one that i can to wipe data and cache by stock recovery.
so, i wiped data and cache and reboot and magically miui started in a few seconds!
So:
1) Thank you so much for your links;
2) CWM it's ok now, ihave it on my phone.
I also downloaded rsdlite...
Hi all.
Just a bit not so much noob of razr.
Click to expand...
Click to collapse
Bravissimo. You just graduaded ex noob
Cheers
Sent from my XT910 using xda premium
U Hello xda,
I've decided to root my xt910 and install cm rom. Root went smoothly however i had problems with the custom recovery. At first i tried safestarps but i couldn't flash the zip it keep aborting the installation :
Set_perm some changes failed. I've tried to install cwm 5.0.8.0 from here http://forum.xda-developers.com/showthread.php?t=1751826 but i got status 7 trying to flash the rom after factory reset and wiping cache. Couldn't find in updater scripts the assert part that i need to delete to make status 7 disappear because of compatibility. I tried to wipe dalvik cache and formatting system which afterwards i manage to flash the rom. At the end i received message "if rom wasnt flashed on rom slot - 1 phone will not boot!!! This will be fixed soon. "
When i tried reboot system nothing boots. And when i try to boot to recovery i get to stock recovery although i had installed cwm.
Now i end of with a bricked phone. My questions are:
1. How can i unbrick?
2. I backed up nandroid with cwm but i cant acces cwm only stock recovery? Why is that and how can i get to cwm?
3. Why my phone is not booting? I did not flash with safestarps so it wasn't flashed on rom slot-1
4. I only have acces to stock rom, ive download a firmware update Jb 4.1.2 can i flash it with stock recovery to solved my brick?
Am i still rooted? Because i read i need to unroot before updating. How can i unroot if i only have stock recovery?
Please help!!! I can't afford lossing this phone!
Anyone have an idea what can i do? Not sure if i should use rsd to flash fastboot files, im not 100% sure what my firmware version is
torecdude said:
Anyone have an idea what can i do? Not sure if i should use rsd to flash fastboot files, im not 100% sure what my firmware version is
Click to expand...
Click to collapse
Yes,you should use Rsd.
Where you from?
Here http://forum.xda-developers.com/showthread.php?t=2231289 are all JB fastboot files,pick one for your country.
Sent from my Razr XT910
welder73 said:
Yes,you should use Rsd.
Where you from?
Here http://forum.xda-developers.com/showthread.php?t=2231289 are all JB fastboot files,pick one for your country.
Sent from my Razr XT910
Click to expand...
Click to collapse
thanks, rsd solved my problem.
torecdude said:
thanks, rsd solved my problem.
Click to expand...
Click to collapse
I'm glad that to hear that.
Sent from my Razr XT910