`Does anyone know how to fix bricked android phone without replacing motherboard??
My mobile galaxy s2 is full off and not even switching on ,battery is good .
It happened after flashing an rom .
will using jig fix it ?or what are the ways to fix it ...?
as i searched here all the method need s download mode ..
please help ..
This is a development forum not a newbie help desk. If you want to ask questions first use search.
Plug in a USB jig and if it doesnt power on into download mode then you will need to JTAG fix or motherboard replace depending on how it was bricked. Did you wipe data in stock recovery? Which rom did you flash? Give some relevant info and somebody may help.
Thread closed on the basis that the OP has clearly not bothered to search. I searched for "hard brick" and found at least 3 topics on this.
Related
Hi , i want to ask about my phone cant turn on after using odin 1 click downloader..i try soft reset & hard reset before but still cant turn on ..need help pls
Have you tried removing the battery? If not, try it. Wait a few seconds before reinstalling the battery.
Do you get into DL-mode? Maybe try using a jig.
Arrow MY Galaxy S II I9100G cant turn on
i have removing my battery and try get into DL-mode..but it cant turn on...hmm.. hve to buy usb jigg tomorrow
...but black screen or what?
Try to check this tutorial :
http://forum.xda-developers.com/showthread.php?t=1619571
firstly, remove your battery about 5 minutes or less, then put it on and try to use 3 button again. connect your device to computer with your cable. hope can fix your problem
i m facing same problem in gt i9100G
after using odin my phone cant open donwloading mode using (volume-,home key,power key) then what to do?
i am tired of removing battery thousand time
please help frendsssssssssssss
Try a jig. For me it worked perfectly.
Try the jig
most of the time the USB jig work out just fine and should get u out this problem
Connect it to PC and try to see if ODIN find it, in case you can flash the phone with the right firmware
Are you flashing 9100 Firmware on 9100G
stealthmovic said:
Hi , i want to ask about my phone cant turn on after using odin 1 click downloader..i try soft reset & hard reset before but still cant turn on ..need help pls
Click to expand...
Click to collapse
Does this somehow look like a questions forum to you??
NO. This is a developer forum for developments , not for n00bs to basic crap.
You want to do this first search, look at sticky topics and then go to the dedicated questions forum which surprisingly is for "questions".
briccked i9100g?
stealthmovic said:
Hi , i want to ask about my phone cant turn on after using odin 1 click downloader..i try soft reset & hard reset before but still cant turn on ..need help pls
Click to expand...
Click to collapse
have you tried to flash a kernel? if you havent try it(you dont need to get to download mode) ,and if it still does not repair then usb jig would be needed.
First hello guys..its just my 2nd post here anyways . i have a huge problem that i fully bricked my galaxy s3
My problem is that am stucked at samsung logo black screen and i can't do anything more ( can't enter downlload mode ...can recognize my phone on pc so i can use odin or fully reset it or something)
My bigger problem is that i lose my warrenty because my phone is rooted and flashed
Note: this problem happens while i was trying to flash cm10 and i did something wrong on rom manager thats why that all happens
Srry for my bad english and big talk and thx in advance
donsemaryy said:
First hello guys..its just my 2nd post here anyways . i have a huge problem that i fully bricked my galaxy s3
My problem is that am stucked at samsung logo black screen and i can't do anything more ( can't enter downlload mode ...can recognize my phone on pc so i can use odin or fully reset it or something)
My bigger problem is that i lose my warrenty because my phone is rooted and flashed
Note: this problem happens while i was trying to flash cm10 and i did something wrong on rom manager thats why that all happens
Srry for my bad english and big talk and thx in advance
Click to expand...
Click to collapse
perhaps a USB Jig may be of use to you in this situation to get you to download mode (Check my sig if you need a USB jig)
once you go to download mode, you can get to flash a stock firmware from odin
cheers!
By bricked doesn't that mean it's better off at a repair shop?
Since you can flash through odin. Tried flashing stock fitmwares? there's a site where you can download them.. Google.
Bricked ??? the OP may just be saying fully bricked without knowing .
Service job is paid for no warranty .
OP does not mention recovery mode .
jje
just try to go to samsung center and they will give their warranty. because they can get into download mode too so they can check your binary count dude
after i using odin flash the rom....my galaxy s2 cant power on even download mode or recovery ....how can i do now?? pls help me:crying:
sharon0616 said:
after i using odin flash the rom....my galaxy s2 cant power on even download mode or recovery ....how can i do now?? pls help me:crying:
Click to expand...
Click to collapse
And how on earth do you expect anybody to be able to help you when you cant even be bothered to give any basic relevant information??
What SPECIFIC model do you have?
What SPECIFIC rom was you trying to flash?
What did ODIN log say, any errors etc?
If device is not powering on, booting into any modes then you may now need to get a motherboard replacement. Your only small life line is to possible try waking device up using a USB jig, however in most cases this will not work.
Have you removed battery, waited few mins and tried again?
Also, You're not the only person to ever do this, you should go read forum instead of creating new topics. Answers will be same.
Hi all.
I have already posted my problem in this thread which I have read to the end ( [GUIDE] Fix an unflashable or soft bricked I9100G )
but was not able to get any solution so I'm starting a new thread hopefully someone might be able to help me and sorry if I was not suppose to start a new thread.
My problem is as follows and hope that someone can help.
I have downloaded odin mobile and installed it on my S2 I9100 G which previously had CM 10 installed on it and I wanted to flash the official firmware using Odin mobile. I did run it and then the phone prompted me for M5 or Md5 that was detected and should click yes to verify before flashing. I clicked yes then it started verifying and when it was done it rebooted and then was stuck on the (Samsung Galaxy S2 GT-19100G black screen) and did not want to move. I waited for an hour and a half and nothing happened. When I removed the battery (I could not reset or do anything else) and put it back, the phone turned on by itself and stayed still on the starting screen (Samsung Galaxy S2 GT-19100G black screen)
Now I'm not being able to put it in recovery nor download mode.
Can any one help and anyone knows if the jtag dongle can actually force it to go to download mode even at this stage
Thanks in advance for any suggestion
Ok thank you guys. I think I was able to fix it and revive my phone.
go to service centre they solve your problem
Sent from my GT-I9100G using xda premium
Make sure you got the right M.O kernel (I9100G).
Sent from the little guy
Hello everybody
My lg g2 device can't working at all !!
No logo, no download mod, no factory rest, even charge
That's happening after i install this rom
http://forum.xda-developers.com/lg-g2/development/rom-lg-g2-pro2-v5-final-acura-d802-d805-t3095500
Is there any way to get my g2 back? :crying:
Sorry for my bad language
So also no recovery? If not then you might have to go to the unbricking guide where you need to open your phone to unbrick it. It can even recover from hard bricks like this as I also fixed something similair when I accidently flashed the wrong bootloader. I suggest to read that unbricking guide here in general and try to fix it yourself, else ask a friend who is good at this kinds of stuff