Good day,
I have a Samsung Galaxy S3 phone, which I recently unrooted. I followed this guide to unroot:
http://forum.xda-developers.com/showthread.php?t=1710613
I used Odin3, v1.85. The file I put in the PDA section was downloaded from the site in the guide and was the following: I9300XXALF5_I9300PROALF1_I9300XXLF5_HOME.tar.md5
I did run into some problems while attempting to unroot though, a few times I started the process in Odin to find it had failed after the first quarter of the bar was filled. I think this might have had something to do with my pc ejecting my phone whenever it felt like, but I'm not completely sure (the rooting was done on a different pc by someone else). Of course, because of that I couldn't properly start my phone and it gave me an error message about the firmware not being correctly installed. I persisted and eventually I got it working, though no idea how I managed.
Now, before the root and during the root I had Android 4.1.1, but after the unrooting it went to 4.0.4. Whenever I try to search for an update, either via WiFi, 3G or even Kies on the pc, it says there aren't any new updates. Device status is normal, and custom binary download is No. Bought my phone in Belgium, if that matters any.
Screenshot of the about screens in attachment. Is there anything I can do to get it to update, preferably without the use of Odin?
Please be gentle, I'm a complete noob when it comes to this and I'm not looking to reroot.
Thank you for reading through!
just connect your phone with computer and update via samsung kies
else, download the firmware from http://sammobile.com/firmware/ for your country and flash using pc odin
XeactorZ said:
just connect your phone with computer and update via samsung kies
else, download the firmware from sammobile.com/firmware/ for your country and flash using pc odin
Click to expand...
Click to collapse
Thanks for taking the time to reply! I however already tried with Samsung Kies, and it says there isn't an update there too. I tried finding the latest firmware on the site you linked for unrooting, and it came up with the file I mentioned in the first post, which resulted in 4.0.4. I'm kinda hesitant to flash again, since I encountered problems when I unrooted.
EDIT: Just tried with Kies again, and it tells me it is the latest firmware. It says something like this:
PDA:LF5/PHONE:LF5/CSC:LF1 (PRO)
Root your phone again
And install mobile odin
Then wipe data and cache using Mobile Odin
It will factory reset
Then you will see that your device status becomes normal
Then go to super su settings and choose full unroot
Sent from my GT-I9300 using xda premium
freddy1991 said:
Root your phone again
And install mobile odin
Then wipe data and cache using Mobile Odin
It will factory reset
Then you will see that your device status becomes normal
Then go to super su settings and choose full unroot
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
Thank you! I will try that soon, when I have time. Just a question though, is there no need for Triangle Away with this method? I remember using it for the unroot before.
I think you should also use triangle away to reset the flash counters
Sent from my GT-I9300 using xda premium
Guess I'll post it here for people who happen upon the same problem.
Got it fixed, using this guide:
androidcritics.com/how-to-update-samsung-galaxy-s3-to-official-android-4-1-1-jelly-bean-xxdlib-firmware/
Basically just used Odin to flash the file downloaded there (I9300XXDLIB_I9300OXFDLI1_I9300XXDLIB_HOME.tar.md5) on the phone, worked after the second try. I think my problem is that my computer decides to eject my phone whenever it feels like.
After flashing 4.1.1, it found and installed 4.1.2 update, so I think it's fixed now.
Thanks to everyone who helped. Cheers!
Related
I dont't see odin or download in the phone at all. Just connect to Kies. Is my phone bricked? Can it be restored? If it can be restored, can someone lead into the right direction? I was trying to restore the phone and my power went out for 10 min and now it's back on
If you haven't shut off the phone you should be able to load it back up in Odin desktop and start over. Can you get into download mode?
Sent from my SGH-I777 using xda premium
thanitos said:
If you haven't shut off the phone you should be able to load it back up in Odin desktop and start over. Can you get into download mode?
Sent from my SGH-I777 using xda premium
Click to expand...
Click to collapse
when I plug in Odin, I get the yellow bar 0:[COM4] but nothing happens, i gets stuck on boot.bin. and nothing is on the display except for the firmware upgrade encountered..blah blah
BROKKANIC said:
http://forum.xda-developers.com/showthread.php?t=1286432
http://forum.xda-developers.com/showthread.php?t=1313659
Read it and follow the instructions.
Make sure you click the Thanks button for entropy and creepyncrawly
Click to expand...
Click to collapse
Sent from my SGH-I777 using xda premium
i tried and tried and tried. i just took it to att and was able to exchange for a new one through warranty
alee821 said:
i tried and tried and tried. i just took it to att and was able to exchange for a new one through warranty
Click to expand...
Click to collapse
Please don't root or mod that new phone unless you read before you do. You don't belong Modding a phone
Sent from my SGH-I777 using xda premium
Lol. I couldn't figure out how to make my phone do what I wanted so I returned it for a new one that I still won't be able to figure out how to make do what i want because I don't wanna learn just give me cool shizz naoww!
The problem wasn't your phone. It was a kies / driver / USB port problem, lots of people are experiencing the same thing. But I agree with the above poster, please don't modify the new one. If THIS was something you're willing to return it for, imagine if u had an actual problem.
Sent from my Nexus 7 using Tapatalk 2
This guy is as bad as moneyover
Sent from my SGH-I777 using Tapatalk 2
alee821 said:
I dont't see odin or download in the phone at all. Just connect to Kies. Is my phone bricked? Can it be restored? If it can be restored, can someone lead into the right direction? I was trying to restore the phone and my power went out for 10 min and now it's back on
Click to expand...
Click to collapse
Try installing Samsung Kies http://www.google.com/url?sa=t&rct=...Hsxw4ptEdLDgjmDtA&sig2=s2Ik_zAvbYl1EZ28DFGk_A
then pop off your battery and get your Model and serial (NOT IMEI!) numbers and write them down.
in kies click on tools>emergency firmaware recovery a window should popup
boot your device into download mode
on the "emergency fw recovery window" should show your device... it will ask for your SN and model, input them as it shows on the back of your device. It will then install the latest Samsung FW (ICS).
worked for me when i got mine to the point odin wasnt working.
Stock SGH-I777 "Firmware upgrade encountered an issue"
My phone froze and when I tried to boot it back up it showed "Firmware upgrade encountered an issue". I'm running a stock jellybean rom so I tried emergency recovery with kies and it gets stuck at "Proceed to firmware emergency recovery" at 0%. I have tried using different usb cables, ports and even different pc's. I also reinstalled all the drivers properly. I tried flashing a stock rom using odin but it always fails. I can go into download mode but not recovery mode. I looked at many threads and the common course of action is to flash with odin. I have tried numerous times with different methods and it still won't get fixed. Please help. Thanks in advance and I apologise if this question is getting old but I am stumped.
note: before this happened the phone was working perfectly fine. I was running a stock rom and no root
@csgo0013,
creepyncrawly said:
Did you follow all of these steps in order? If not, go through this sequence again, from 1 through 6.
Click to expand...
Click to collapse
Flashing the kernel
Thanks @cyril279. I tried it again with no luck. Flashing the kernel failed. And now it shows that the current binary is now custom. It was official before. And also the binary counter went from 1 to 3. IDK if that helps at all
The increased binary counter is likely the result of attempts to flash the Siyah (non-stock) kernel. I was unaware that it would notch the counter if the flash was NOT successful.
Assuming that you followed the steps thoroughly, in their correct order, and using the correct firmware for the exercise, (siyah kernel and SBL.bin) then I am left to assume, as the post states, that your eMMC memory is damaged.
I have not had much experience with damaged eMMC memory, so perhaps our peers can chime in with other options that may be available to verify the condition of the device.
creepyncrawly said:
Try the following, just in case the problem is nand r/w corruption.
[...the six steps...]
If you are unable to get any of these to flash successfully, first you should assume a bad port, or bad cable, and try other ports, other cables, even another pc. If you can get no flash to succeed, then you may have damaged eMMC memory.
In case it is damaged memory, see this post from Mobile Tech Videos.
Click to expand...
Click to collapse
csgo0013 said:
Thanks @cyril279. I tried it again with no luck. Flashing the kernel failed. And now it shows that the current binary is now custom. It was official before. And also the binary counter went from 1 to 3. IDK if that helps at all
Click to expand...
Click to collapse
I've tried updating my phone via kies but nothing happens, it seems to hang once it's finished downloading the firmware update.. Has anyone experienced this? Am I doing something wrong?
I was rooted, but I used Odin via PC to get back to stock.
xamadeix said:
I've tried updating my phone via kies but nothing happens, it seems to hang once it's finished downloading the firmware update.. Has anyone experienced this? Am I doing something wrong?
I was rooted, but I used Odin via PC to get back to stock.
Click to expand...
Click to collapse
If you're on 2.3.4 update OTA to 2.3.6 then update via kies
j510 said:
If you're on 2.3.4 update OTA to 2.3.6 then update via kies
Click to expand...
Click to collapse
Yeah I tried updating to 2.3.6 OTA on and wifi through software update.. it just froze on me after it rebooted when going into the update process. It as stuck at loading screen.. Any way I can just flash to 4.0.3 stock?
Do you have a stock kernel?
Anyways open kies on pc, click tools, upgrade and initialize with no phone connected to pc, input phone model, input s\n can be found behind battery of phone. if anything It might be possible itwill prompt to flash the firmware you are already currently on (happened to me). Update. Once it is complete do the steps over and you should be presented with ics on the next upgrade and initialize attempt. Good luck
j510 said:
Do you have a stock kernel?
Anyways open kies on pc, click tools, upgrade and initialize with no phone connected to pc, input phone model, input s\n can be found behind battery of phone. if anything It might be possible itwill prompt to flash the firmware you are already currently on (happened to me). Update. Once it is complete do the steps over and you should be presented with ics on the next upgrade and initialize attempt. Good luck
Click to expand...
Click to collapse
I flashed the back to stock with no root, I dont know what kernel i have i just know I do not have clockwork mod just the stock recovery.. I tried updating the way you told me and it downloads the firmware and kies just freezes.
Just flash the stock package from the stickies. I have never used kies across 3 different Samsung devices.
Sent from my SGH-I777 using xda premium
Hi,
Me and my partner both got s3's recently his on contract mine on like buy as you view. Mine received the 4.1.1 update through the phone and after waiting a few weeks and still nothing on his we decided to update it via computer. I used odin because i saw on a post that thats what you were supposed to use and flashed it to 4.1.1. I then realised i had put the wrong version on (German one i think) and it was causing errors so we flashed again to 4.1.1 the UK version.
He is now on:
Android version 4.1.1
Baseband version I9300XXDLID
I do not know if that's correct but everything seems a ok.
However since then my phone received the 4.1.2 update and we want the same update on his phone. It does not find it on the phone. Since then i learned KIES is the samsung software not odin. No updates can be found via KIES cos the software isn't supported. I want to be able to use KIES with his phone again, can i reverse the odin update anyway?? I rang samsung and he told me it will be like that forever now and i will never be able to use KIES?
Can anyone assist me. I really want ot be able to update from KIES again instead of using odin.
Sorry if i sound like a noob im only good with apple technology haha!! :laugh:
(edit)
P.S. My software is
Android version 4.1.2
Baseband version I9300XXELLA
we are both on Orange if thats any help? His came on Ice Cream Sandwich though and mine came on 4.1.1
If the phone isnt locked on orange just download 4.1.2 from sammobile and instal via odin as u did beffore.
Sent from my GT-I9300
Odin is official samsung. You can use Kies if you use OFW. If your current OFW doesn't support Kies, just download other from samfirmware.com.
Sent from my GT-I9300 using xda premium
i have no idea what OFW stands for lol. Samsung told me on the phone i should not have used odin as it will void warranty. Im trying to revert the update so that i can use kies again cos it will not work at all now, and get the updates directly on the phone. Is this even possible?
Fygaroo said:
If the phone isnt locked on orange just download 4.1.2 from sammobile and instal via odin as u did beffore.
Sent from my GT-I9300
Click to expand...
Click to collapse
If i do that will i still have to always use odin?
roxii said:
If i do that will i still have to always use odin?
Click to expand...
Click to collapse
Before flashing with odin try doing a factory reset on your device and then check if your device status is NORMAL to do that go to settings>about devoce>status>device status if it says normal then u are ok if it says modified try flashing the stock room with Odin and doing factory reset after the flash and if that dosnt work your device is maybe rooted and u need to unroot and do a triangle away here is the guide how to do that http://forum.xda-developers.com/showthread.php?t=1710613
roxii said:
i have no idea what OFW stands for lol. Samsung told me on the phone i should not have used odin as it will void warranty. Im trying to revert the update so that i can use kies again cos it will not work at all now, and get the updates directly on the phone. Is this even possible?
Click to expand...
Click to collapse
Yes you want 100\% the exact firmware that came with the phone including CSC .
A stock Samsung firmware can be flashed via Odin without any problems .
jje
Fygaroo said:
Before flashing with odin try doing a factory reset on your device and then check if your device status is NORMAL to do that go to settings>about devoce>status>device status if it says normal then u are ok if it says modified try flashing the stock room with Odin and doing factory reset after the flash and if that dosnt work your device is maybe rooted and u need to unroot and do a triangle away here is the guide how to do that http://forum.xda-developers.com/showthread.php?t=1710613
Click to expand...
Click to collapse
Heres whats confusing then.. it says device status normal without me doing anything to it. So shouldbt I be able to use kies and do updates from the phone?
Fygaroo said:
Before flashing with odin try doing a factory reset on your device and then check if your device status is NORMAL to do that go to settings>about devoce>status>device status if it says normal then u are ok if it says modified try flashing the stock room with Odin and doing factory reset after the flash and if that dosnt work your device is maybe rooted and u need to unroot and do a triangle away here is the guide how to do that http://forum.xda-developers.com/showthread.php?t=1710613
Click to expand...
Click to collapse
And when I check for updates on the phone it says latest update already installed but its definately still on 4.1.1. Ill update via odin to the orange 4.1.2 and see what happens
OFW is "official firmware"
JJEgan said:
Yes you want 100\% the exact firmware that came with the phone including CSC .
A stock Samsung firmware can be flashed via Odin without any problems .
jje
Click to expand...
Click to collapse
Ypu can achieve this by using KIES.
Open kies
Start recovering and make sure you can put your cells serial number somewhere
Connect phone only when kies asks to
Voila, stock as used to.
Kind regards,
Thomas
Sent from my GT-I9300 using Premium XDA-developers app
roxii said:
And when I check for updates on the phone it says latest update already installed but its definately still on 4.1.1. Ill update via odin to the orange 4.1.2 and see what happens
Click to expand...
Click to collapse
Thats probably because 4.1.2 is not out yet for that region carrier .
Fygaroo said:
Thats probably because 4.1.2 is not out yet for that region carrier .
Click to expand...
Click to collapse
Will that be because i accidentally put a different region on before i went back to uk? As i know its definately out as i have it on my phone and they are available on sammobile. I will try and restore through kies. Will i loose my data?
htcsnap93 said:
Ypu can achieve this by using KIES.
Open kies
Start recovering and make sure you can put your cells serial number somewhere
Connect phone only when kies asks to
Voila, stock as used to.
Kind regards,
Thomas
Sent from my GT-I9300 using Premium XDA-developers app
Click to expand...
Click to collapse
Hi just wondering im trying to do what you said, but my phone isnt showing up in a list to do it? Thanks
roxii said:
Hi just wondering im trying to do what you said, but my phone isnt showing up in a list to do it? Thanks
Click to expand...
Click to collapse
Search sammobile.com or use Google search .
jje
htcsnap93 said:
Ypu can achieve this by using KIES.
Open kies
Start recovering and make sure you can put your cells serial number somewhere
Connect phone only when kies asks to
Voila, stock as used to.
Kind regards,
Thomas
Sent from my GT-I9300 using Premium XDA-developers app
Click to expand...
Click to collapse
I've been wondering, does this method wipe user data or not?
Just curious.
esist said:
I've been wondering, does this method wipe user data or not?
Just curious.
Click to expand...
Click to collapse
im not bothered about loosing my user data but the option isnt there for me, it says phones that need this are listed below and the phone does not show. Not even if i put it in recovery mode. Any assistance would be great i am however just going to download some 4.1.2's today to try and fix it. I did notice however that when in download mode at the bottom it said something about multi CSC should it say this? LOL i wish i was more technologically savvy but i am literally only good at apple software. Wish id just waited Someone said to do one with BTU on the end and it should correct the CSC code? any idea if this is right?
I should however imagine it would delete all user data, people on other posts have said it was lost
Please read forum rules before posting
Questions and help issues go in Q&A
Thread moved
Thank you for your cooperation
Friendly Neighborhood Moderator
roxii said:
im not bothered about loosing my user data but the option isnt there for me, it says phones that need this are listed below and the phone does not show. Not even if i put it in recovery mode. Any assistance would be great i am however just going to download some 4.1.2's today to try and fix it. I did notice however that when in download mode at the bottom it said something about multi CSC should it say this? LOL i wish i was more technologically savvy but i am literally only good at apple software. Wish id just waited Someone said to do one with BTU on the end and it should correct the CSC code? any idea if this is right?
I should however imagine it would delete all user data, people on other posts have said it was lost
Click to expand...
Click to collapse
Ok if u want the 4.1.2 update and u want to be able to use OTA i advise u to do flash the latest 4.1.2 room from this post http://forum.xda-developers.com/showthread.php?t=1646610 there is even a guide there how to flash it , if your device shows modified status after the flash just reboot into Android Recovery by holding Vol UP + Home + Power till you see Samsung Galaxy S3 displayed on screen , then u will see the recovery options, do a factory wipe and wipe cache then reboot and u should now be able to receive OTA updates .
I am also using the same room and all is working ok OTA shows no new updates but i think when the updates hits i will be able to get it via OTA , kies is not working but i think u dont need to worry about it because u can always flash via Odin .
Here is a guide how to flash a room with working Kies and OTA
First u need to root your device u can do this by following this guide http://forum.xda-developers.com/showthread.php?t=1957273
Edit: When u finish rooting u should use this app its called triangle away http://forum.xda-developers.com/showthread.php?t=1494114 and use it to reset the counter .
When u are done with triangle away then download this on your phone it available on play store https://play.google.com/store/apps/details?id=com.manniakk.cscselector&hl=en
Run it and change your CSC to BTU this will factory reset your phone after u done that u should flash the UK room from here http://forum.xda-developers.com/showthread.php?t=1646610
When u finish that u should boot into recovery and wipe data/factory reset , you should now be able to use Kies .
I am not sure this will work 100% but it should , if u could remember what was the CSC and room before you flashed the devices with odin you could flash that firmware.
Tell me if it worked.
I'm trying to return to stock on my Verizon Note 2. I'm currently on AOKP 4.2.2 and have TWRP. I tried to use the Odin method shown by Adam but my phone is not being seen via USB. I've tried to uninstall all drivers and reinstall. Tried again by using Kies as suggested by many.
Can I return to stock just by using TWRP? Are there steps or a walk through on how to do this? Links? I'm thinking I could go into TWRP, wipe the cache, delvik cache, and then factory reset. Then install, "flash" a update.zip and return to stock. Would this work or get stuck?
Also, not sure where to get the update.zip I'd need. I have the OTA stock downloaded from Adam tutorial...not the "alternate" but it's only one file. Would I just zip that, rename to update.zip and try to flash?
Please help!! Again I'm unable to do this through usb plug in so I really need another route.
Thank you in advance for any help!
Do not try renaming the file and flashing. Nothing good will come of that.
Not sure if you looked through this thread, but this might have different info for you.
http://forum.xda-developers.com/showthread.php?p=35265728
BoostedB18C said:
Do not try renaming the file and flashing. Nothing good will come of that.
Not sure if you looked through this thread, but this might have different info for you.
http://forum.xda-developers.com/showthread.php?p=35265728
Click to expand...
Click to collapse
I read through that one too. Tried all of that. ODIN will not work. My phone is not being detected through USB. Again i've tried all the reinstalls of the drivers etc.... Tried different original cords. nothing.
I need a way to return to stock through my device. Maybe load to the external sd and flash. Can this be done?
Not sure what file to flash though.
If odin isn't seeing your phone then something isnt installed properly. Probably drivers. Im not too sure about it because the only time I used odin was when I first rooted and I haven't touched it since.
The only option I have heard of for doing it from the phone is mobile odin. I dont know much about it, never tried it. Here's the link for it
This is the free lite version that requires more work on your part
http://forum.xda-developers.com/showthread.php?p=19375402
This is the paid version from the play store and is supposed to be much simpler
https://play.google.com/store/apps/details?id=eu.chainfire.mobileodin.pro
hidden-one said:
I'm trying to return to stock on my Verizon Note 2. I'm currently on AOKP 4.2.2 and have TWRP. I tried to use the Odin method shown by Adam but my phone is not being seen via USB. I've tried to uninstall all drivers and reinstall. Tried again by using Kies as suggested by many.
Can I return to stock just by using TWRP? Are there steps or a walk through on how to do this? Links? I'm thinking I could go into TWRP, wipe the cache, delvik cache, and then factory reset. Then install, "flash" a update.zip and return to stock. Would this work or get stuck?
Also, not sure where to get the update.zip I'd need. I have the OTA stock downloaded from Adam tutorial...not the "alternate" but it's only one file. Would I just zip that, rename to update.zip and try to flash?
Please help!! Again I'm unable to do this through usb plug in so I really need another route.
Thank you in advance for any help!
Click to expand...
Click to collapse
Are u sure usb debugging is on?, or try going back to a tw rom before using odin, i also read that kies has to be removed from comuter, and phone before trying this, i had problem originally, manually installed drivers, and went to device manager and checked operation, you also have to be in odin mode on phone( power,home,down at same time, as that way it is in download mode.
Sent from my SCH-I605 using XDA Premium HD app
Chance77 said:
Are u sure usb debugging is on?, or try going back to a tw rom before using odin, i also read that kies has to be removed from comuter, and phone before trying this, i had problem originally, manually installed drivers, and went to device manager and checked operation, you also have to be in odin mode on phone( power,home,down at same time, as that way it is in download mode.
Sent from my SCH-I605 using XDA Premium HD app
Click to expand...
Click to collapse
Tried all of this as well. I installed kies and tried that route as some were saying the drivers may work through that method. They didn't so I tried uninstalling. I was in DL "odin" mode when trying to run odin also.
Just curious, why are you trying to go back to stock?
BoostedB18C said:
Just curious, why are you trying to go back to stock?
Click to expand...
Click to collapse
My phone was a trade off for a iPhone 5.. Best move ever but the last owner had somewhat messed up the phone modding it. I did a full wipe and the previous owner had never done any backups. I wanted to start fresh. All that being said I wanted to start back fresh at stock and then do any modding that I preferred from a new state.
I just flashed MeanBean after reading back through the posts to my question. I realized I had not tried using odin while on a TW based ROM.
I'll see if this helps.
BoostedB18C said:
If odin isn't seeing your phone then something isnt installed properly. Probably drivers. Im not too sure about it because the only time I used odin was when I first rooted and I haven't touched it since.
Click to expand...
Click to collapse
I too am having issues with my Note II not being recognized by Odin on my PC. I know my drivers are installed and I have a good connection with my USB cable/port since when I plug in my phone when powered on, I can see the phone and card just fine. However, when going into Download mode and running Odin 3.07, Odin isn't seeing my phone.
I discovered this while looking into another situation from another thread. While I'm not currently attempting to return to stock and aren't overly concerned about returning to stock since I could probably do it with Mobile Odin if push comes to shove. I am concerned, however, that if I'm unable to use MO and my phone isn't being recognized by Odin from my PC then I might be up the proverbial creek with a paddle.
BoostedB18C said:
If odin isn't seeing your phone then something isnt installed properly. Probably drivers. Im not too sure about it because the only time I used odin was when I first rooted and I haven't touched it since.
The only option I have heard of for doing it from the phone is mobile odin. I dont know much about it, never tried it. Here's the link for it
This is the free lite version that requires more work on your part
http://forum.xda-developers.com/showthread.php?p=19375402
This is the paid version from the play store and is supposed to be much simpler
https://play.google.com/store/apps/details?id=eu.chainfire.mobileodin.pro
Click to expand...
Click to collapse
Mobile Odin Pro did the trick. It incorporated root saver so I didn't loose root when I returned to stock. Great advice!! Now I can start fresh and not have to worry about the mess I had from the trade.
Thanks again!
hidden-one said:
Mobile Odin Pro did the trick. It incorporated root saver so I didn't loose root when I returned to stock. Great advice!! Now I can start fresh and not have to worry about the mess I had from the trade.
Thanks again!
Click to expand...
Click to collapse
Glad it worked. And as an added bonus now I know if I do ever have problems and dont feel like spending the time to figure it out, I can just use mobile odin.
I had my samsung galaxy sch i545 rooted! But verizon kept pushing for the new update i unrooted and flashed back to the original stock firmware, and stored my original recovery! And then i factory reset! So everything was back to normal. I even ran the triangle away to set my flash counter to 0? I try to update, it boots into recovery and then when its updating it says error and restarts my phone. And it says update unsuccessful! Please help! What should I do next? I heard this was a good place to ask questions and the administrators and the moderators were really helpful! Please help guys!
goldenabhisek said:
I had my samsung galaxy sch i545 rooted! But verizon kept pushing for the new update i unrooted and flashed back to the original stock firmware, and stored my original recovery! And then i factory reset! So everything was back to normal. I even ran the triangle away to set my flash counter to 0? I try to update, it boots into recovery and then when its updating it says error and restarts my phone. And it says update unsuccessful! Please help! What should I do next? I heard this was a good place to ask questions and the administrators and the moderators were really helpful! Please help guys!
Click to expand...
Click to collapse
Make sure you using stock cable that come with phone. ..try different usb port re download again kies power down and up computer. ....make sure there is no antivirus and firewalls running in background. ...make sure you don't have ticked nothing in developer menu. ......
And try again. .....
Verizon also pulled new update that was making problems with receptions bug...so call first and confirm that you getting one without reception bug that was pulled by Verizon not long ago
Sent from my SGH-M919 using xda premium
okay i tried that and i have powered down kies and did everything! i just cant get it to work? I changed the port, i have to antivirus and i closed kies using task manager? Is there any reason this should be happening?
goldenabhisek said:
okay i tried that and i have powered down kies and did everything! i just cant get it to work? I changed the port, i have to antivirus and i closed kies using task manager? Is there any reason this should be happening?
Click to expand...
Click to collapse
What do you using to update. ...
Sent from my SGH-M919 using xda premium
samprocat said:
What do you using to update. ...
Sent from my SGH-M919 using xda premium
Click to expand...
Click to collapse
I am using my phone?? Downloading the updating and ins taking from my Galaxy s4...
goldenabhisek said:
I am using my phone?? Downloading the updating and ins taking from my Galaxy s4...
Click to expand...
Click to collapse
Try using kies. ...Over the air ...don't
Open kies conect phone to computer let kies find your phone. ..then from there use kies to find update for you
Last thing is to use stock 3c recovery and do hard reset there then boot let it go for 10 minutes pass all settings don't setup Google play store.....connect to pc to be recognized by kies and try again
Sent from my SGH-M919 using xda premium
samprocat said:
Try using kies. ...Over the air ...don't
Open kies conect phone to computer let kies find your phone. ..then from there use kies to find update for you
Sent from my SGH-M919 using xda premium
Click to expand...
Click to collapse
Okay I will try that when I get home and will post of our worked or not and thank you very much for the help and it out doesn't work I'll post again
goldenabhisek said:
Okay I will try that when I get home and will post of our worked or not and thank you very much for the help and it out doesn't work I'll post again
Click to expand...
Click to collapse
How did you make out? I have the same problem and have spent all day searching for a solution. I am close to just buying a new phone out of contract because I can't spend anymore time on it. At this point I am assuming that as a result of rooting, even though I have removed it the OTA update continues to see something and so it won't complete it's update. I even installed the "full wipe" original stock ROM via Odin but no such luck.
dougbma50 said:
How did you make out? I have the same problem and have spent all day searching for a solution. I am close to just buying a new phone out of contract because I can't spend anymore time on it. At this point I am assuming that as a result of rooting, even though I have removed it the OTA update continues to see something and so it won't complete it's update. I even installed the "full wipe" original stock ROM via Odin but no such luck.
Click to expand...
Click to collapse
I'd also like to know.
Not sure what you guys are doing but if you installed the MK2 no wipe image and did not try to root, the update should go fine.
Hey guys, i had this exact same issue with a stock s4, never been rooted. called verizon and they told me to go to a samsung kiosk inside a best buy store. i had done all the usual stuff, including hard resets. The guy at the samsung store decided it would be best to do a Binary Wipe which wipes every little thing on the phone (take out your sd card beforehand). It worked, i had the update on the sd card and it took after the binary wipe. it is the lowest level wipe you can do. as far as i know only the samsung people can do it... they wipe it and restore stock 4.3 verizon to your phone, then the update will take.