Hello guys, many of my friends from FB use CM10 and I want to install it, but I see that is completely different. as in this thread doesnt explain clearly how to install.. should i first flast to stock kernel and stock rom with flashtool?
It's not required!
You just need unlocked bl
Flash kernel inside the zip
Boot into cwm
Do the wipes (all of them including formats)
Install the Rom!
Done! You have cm10 running!
Sent from my MT11i using xda premium
Ghostfreak NB said:
It's not required!
You just need unlocked bl
Flash kernel inside the zip
Boot into cwm
Do the wipes (all of them including formats)
Install the Rom!
Done! You have cm10 running!
Sent from my MT11i using xda premium
Click to expand...
Click to collapse
Is required to install the kernel inside the zip? or I can install Lupus? so basically
If lupus is there,you can go for it!
Provided its Jb based
Sent from my MT11i using xda premium
In this thread, it said that I need to flash the kernel at final..
Kernels can be flashed before or later.... It should be flashed!
That's the point!
Sent from my MT11i using xda premium
Ok bro thanks for ur patience
Related
I have just made a zip of the ICS FTF for a friend.
My questions are: is there one already and I just wasted my time?
If not, does anybody want to test it as I won't be able to check on my friend's phone for another two days.
I've removed some apps and rooted it.
Sent from my Xperia Play using xda app-developers app
There is none,as far as i know,n is it for st25i or st25a..please gimme the link,i'll test it n report back..also.does the recovery works even after the update..??
I haven't added the kernel, so I think the ROM would have to be flashed in recovery first, then flash the stock kernel in Flashtool. I could upload that as well if needed.
I could look into adding the kernel, I think it's just a few lines in the update script. It's unlikely to have recovery though. Don't know how to do that yet.
I'm not familiar with adding kernels because I've only tried with a phone that can't flash kernels in recovery.
Sent from my Xperia Play using xda app-developers app
As far as I know it is a, but I've changed the build.prop to i. I read as long as you don't flash the baseband it should be OK.
Sent from my Xperia Play using xda app-developers app
So,that means i just have to boot into recovery and flash the zip,and then flash the stock kernel again..right,,k gimme all the lins,m keen to try it..
xperiavish said:
So,that means i just have to boot into recovery and flash the zip,and then flash the stock kernel again..right,,k gimme all the lins,m keen to try it..
Click to expand...
Click to collapse
Correct.
I'll look into a way to upload it.
Sent from my Xperia Play using xda app-developers app
I hope Dropbox is OK.
http://db.tt/jaHO2eJU
Sent from my Xperia Play using xda app-developers app
Thank you so much for the zip!
It actually worked?
Sent from my Xperia Play using xda app-developers app
Not working for me..stuck in bootloop..
Did you wipe caches and data before and after, and use the correct (stock ICS) kernel?
Sent from my Xperia Play using xda app-developers app
I've downloaded FXP 150 CM 7.2 rom zip file
It contains the following folders & a sin file :
1. META-INF
2. system
3. kernel.sin
Now what do I do??
How do I install the Rom on my x10
My bootloaders unlocked
& I've even tried ALL roms out there including jelly bean roms
.
Problem is I never tried any of fxp's roms due to their complicated procedure of bundling & installing
But want to try them now
.
Please can anyone show me a step by step procedure for installing the above mentioned Rom
Thanks in advance
Sent from my X10i using xda premium
Anyone?
Sent from my X10i using xda premium
Zip it with 7zip or winrar and flash ,,, if it doesnt work restore your backup
Sent from my Xperia MT15i Neo using XDA Premium
dontbelive said:
Zip it with 7zip or winrar and flash ,,, if it doesnt work restore your backup
Sent from my Xperia MT15i Neo using XDA Premium
Click to expand...
Click to collapse
They are already in a zip file
Sent from my X10i using xda premium
kirti_grewal said:
They are already in a zip file
Sent from my X10i using xda premium
Click to expand...
Click to collapse
Put the FXP CM7 150 zip you download on your SDcard take you phone off and flash this:http://ul.to/n9bjkpvv using flashtools and then go to recovery and flash the FXP CM7 150. I am assuming that your bootloader is unlocked right? since you have flashed jellybean before.
brenty108 said:
Put the FXP CM7 150 zip you download on your SDcard take you phone off and flash this:http://ul.to/n9bjkpvv using flashtools and then go to recovery and flash the FXP CM7 150. I am assuming that your bootloader is unlocked right? since you have flashed jellybean before.
Click to expand...
Click to collapse
Done
Thank you so much
Sent from my X10i using xda premium
kirti_grewal said:
Done
Thank you so much
Sent from my X10i using xda premium
Click to expand...
Click to collapse
What's the report? Could you elaborate?
pathaniya said:
What's the report? Could you elaborate?
Click to expand...
Click to collapse
Installed it used it for 20mins -
Smooth, jittery camcorder, foto camera works usable. How long that i don't know. Still the most stable is ZMOD with ZMOD kernel.
What do I have to do first? Install CWM and flash the kernel, or just flash the kernel without installing CWM, I'm asking because I was having problems with flashing it. Please help
Sent from my E10i using xda app-developers app
the nAa kernel include the cwm
Sent from my LT18i using xda app-developers app
munlicar97 said:
What do I have to do first? Install CWM and flash the kernel, or just flash the kernel without installing CWM, I'm asking because I was having problems with flashing it. Please help
Sent from my E10i using xda app-developers app
Click to expand...
Click to collapse
-First update your original firmware to the latest one
-root your phone with superoneclick or flashtool (program for computer)
-unlock bootloader with flashtool
-use flashtool to flash the kernel you want
-then finally you can enter on cmw and flash your rom
Is it a good idea to install CWM before flashing the kernel, is it safe?
Sent from my E10i using xda app-developers app
munlicar97 said:
Is it a good idea to install CWM before flashing the kernel, is it safe?
Sent from my E10i using xda app-developers app
Click to expand...
Click to collapse
Yes.
And it will make the next process of installing the ROM much more easy.
The nAa kernel include the cwm, so no need to install CWM first.
But i had problems with flasging the kernel, I have a rooted phone, with unlocked bootloader, and it always says error. So I'll try again to flash it and can it brick my phone?
Sent from my E10i using xda app-developers app
If you're talking about a kernel like naa-14, i think that when you flash a kernel that it comes with cwm with it, so there's no need to instal cwm before flashing kernel. If you're getting errors then just try flashing kernels without installing cwm separately.
Is that necessary to rename any custom kernel to "boot.img" before flashing it (via FLAHTOOL.exe) ?
I want know this bcoz I flashed a kernel(not renamed to 'boot.img') and after that installed a ROM(for unlocked BL only) via CWM and got black screen or bootloop... Please help meh..
Sent from my MT11i using xda app-developers app
You can change kernel name,but make sure you type in command prompt with the same name with kernel.
Flash kernel must from a PC ,cant flash through CWM.Before flash kernel make sure you have unlock your bootloader.
My BL is unlocked!!
What do you mean by "command prompt with the same name of kernel ?“
Please say in details...
Sent from my MT11i using xda app-developers app
When you renamed the boot image i.e (PACMAN.IMG)...you must type in DOS command prompt like this fastboot flash boot PACMAN.IMG .
Sorry man... Im using flahtool.exe for flashing
Sent from my MT11i using xda app-developers app
Essaker said:
Sorry man... Im using flahtool.exe for flashing
Sent from my MT11i using xda app-developers app
Click to expand...
Click to collapse
Since you are using flashtool it is not necessary to rename the kernel to boot.img
Sent from my MT11i using xda premium
Essaker said:
Is that necessary to rename any custom kernel to "boot.img" before flashing it (via FLAHTOOL.exe) ?
I want know this bcoz I flashed a kernel(not renamed to 'boot.img') and after that installed a ROM(for unlocked BL only) via CWM and got black screen or bootloop... Please help meh..
Sent from my MT11i using xda app-developers app
Click to expand...
Click to collapse
No need at all if u r usng flashtool
Sent from my Xperia Neo V using xda app-developers app
Essaker said:
Is that necessary to rename any custom kernel to "boot.img" before flashing it (via FLAHTOOL.exe) ?
I want know this bcoz I flashed a kernel(not renamed to 'boot.img') and after that installed a ROM(for unlocked BL only) via CWM and got black screen or bootloop... Please help meh..
Sent from my MT11i using xda app-developers app
Click to expand...
Click to collapse
No need to rename the kernel as boot.img.. But make sure the kernel u r flashing is compatible with the rom... Otherwise ur phone will not boot & u will face bootloop... Like GB ROM = GB Kernel, ICS ROM = ICS Kernel & JB ROM = JB Kernel
Sent from my MT11i using Tapatalk 2
But I have installed haida fusion kernel and then installed super JellyBean 6 via CWM.... Then I get black screen or bootloop
Sent from my MT11i using xda premium
Essaker said:
But I have installed haida fusion kernel and then installed super JellyBean 6 via CWM.... Then I get black screen or bootloop
Sent from my MT11i using xda premium
Click to expand...
Click to collapse
Have u done a full wipe before flashing the rom?
Sent from my MT11i using Tapatalk 2
Essaker said:
But I have installed haida fusion kernel and then installed super JellyBean 6 via CWM.... Then I get black screen or bootloop
Sent from my MT11i using xda premium
Click to expand...
Click to collapse
Dude just go to respective ROM threads and take the pains of reading:banghead: or else you will be reported very soon for creating unnecessary threads.. People are helping you that doesn't mean you will keep behaving like a noob
Sent from my MT11i using xda premium
I did everything... For query I unzipped the SJB 6 ROM... But, in unzipped folder I unable to find boot.img
Sent from my MT11i using xda premium
Essaker said:
I did everything... For query I unzipped the SJB 6 ROM... But, in unzipped folder I unable to find boot.img
Sent from my MT11i using xda premium
Click to expand...
Click to collapse
If you would read the rom thread properly no one has told that the kernel is inside the zip. It is is written that you have to flash fusion 5.4.
XDA MODERATOR IN ACTION.
Thread closed