Hi
I am new to this thread and am having problem with my android tablet...
I have Nextab pro 2 android tablet with following specifications:
Processor: Allwinner 1.5 GHZ
ram: 512mb
storage: 4gb flash built in micro sdhc card slot
display:7.0'' TFT LCD (800 x 400),capacitive touchscreen
networking: Wi-Fi IEEE 802.11 b/g/m
mini HDMI, type C
audio output:3.5mm headphone
PC interface: usb 2.0 Hi-speed
android version:4.0.3
power: rechargeable li-poly battery power adapter (DC 5V)
model no:t01a
it was working fine a few days aga but one day it turned off own its own and now when i tried to start it it got stucked at the android logo screen..
i even tried to get into the recovery mode but it also got stuck at the android logo with a red hazardous symbol on it...
plz help..
thanks in advance....
Related
Hello.
Recently is given to me a Bitmore tab745 7" tablet. Bitmore is a greek company which provide chinese tablets. I cannot find any information for this tablet except some specs I've found on some shops which sell it. Is there any way to find which chinese brand and model is?
This tablet has a 800x480 capacitive screen,
512ram,
4GB storage,
0.3 megapixels front camera,
no bluetooth,
no GPS, no 3g,
has wifi,
CPU BOXCHIPA13 1.2GHz,
Android 4.0
no HDMI,
Micro USB, host/slave USB.
I can also provide some inside case info for included parts if needed.
Also it doesn't seem to have a recovery mode, and by pressing vol- when is off and pluged to usb seems that goes to update/bootloader mode. The screen stays off, but pc recognize it as an unknown device.
Device is already rooted.
Thanks in advanced
Same problem here... Did you manage to find a solution?
For anyone need official rom which works on this device, search for A13-MID704-B-MAIN-VER1.6.
This rom working fine on tab745. Need the livesuit to flash it.
Greetings,
Is anyone familiar with new brand tablet Tesla H7
OS: Android 4.2
Processor: Intel Atom Z2580 (2.0 GHz)
I have one such device, and after seven days of use is stuck on Intel logo when i Power On device
I contacted the manufacturer about some info but he refuses to direct me to a solution.
From my research I found another almost similar devices by shape and hardware spec.
Banghó Aero
TECLAST P79HD
I found and upgrade Telcast firmware pass without problem (using Phone Flash Tool).
After Android successfully boot i see in MyComputer mounted storage while device connected over USB so i concluded upgrade proccess is OK BUT screen on device is black and do not hear a sound when i turn up sound on max with hardware button
ADB shell from console is available.
any proposal?
Thanx
Hi guys,
After having resurrected from brick 2 OnePlus One and an LG G2 i'm struggling for the first time with a MTK of a friend, it is a 1:1 clone of Galaxy Note 3 MT6589, the producer would seem to be HDC and rom correct JSS15J.N900UBUBMJ2.
After flashing a rom if we turn on the device the screen lights up but remains black and a blue LED flashes for a few minutes, if the connect to the charger appears the battery image that slowly recharges as if I connect it to the PC after installing MTK VCOM drivers is seen as "Storage Device mass " on Windows XP and Windows 10
It's bricked? what can I do? any suggestions?
These should be the characteristics of the device
MTK6589 Quad Core 1.5GHz Cortex A9 + SGX544 GPU
1G Ram + 8G ROM
5.7 inch Touch Screen Resolution 1280 * 720
Single SIM Cards
Hey guys, newbie here. I have this phone that i flashed a MiUi 8 custom rom. Then after the flashing the touch got really messed up.
I searched for possible fix but nothing works. I tried flashing the zip using pc but it requires USB debugging. Since i cant use my touch i cant open dev options and check USB debugging. Thaaanks. A reply is highly appreciated!
SPECS OF MY PHONE:
5.5" HD IPS Display
Android 6.0 Marshmallow
1.3GHz Quad Core Spreadtrum SC7731
Mali-400MP GPU
16GB ROM
2GB RAM
13MP Rear + 8MP Front Camera (LP)
8MP Rear + 2MP Front Camera (MM)
Wifi, BT 2.1, 3G HSPA+
5,000mAh Removable Battery
You can try with USB OTG adapter in order to try to control your device with mouse .
I'm not sure if your device support otg but you can try : ) ...
For Example:
https://www.youtube.com/watch?v=fSINaxC5ZQo
Hello everybody, i have reset factory my DVD Car (android) . it run Ok but not connect USB.
guide me how to do it, thanks
Made in china:
Android OS: 9.1
DDR2, Flash 32Gb, CPU: A53 1.5Ghz x4,
Radio: NXP6851,
Amplifier:ST7850MOS,
Display 1024*768 (6bit),
MCU1: 1.5 (3561)
namduong81 said:
Hello everybody, i have reset factory my DVD Car (android) . it run Ok but not connect USB.
guide me how to do it, thanks
Made in china:
Android OS: 9.1
DDR2, Flash 32Gb, CPU: A53 1.5Ghz x4,
Radio: NXP6851,
Amplifier:ST7850MOS,
Display 1024*768 (6bit),
MCU1: 1.5 (3561)
Click to expand...
Click to collapse
I have changed cable, USB 2Gb format FAT32
Note: before reset factory my DVD car still read USB
Thanks
namduong81 said:
I have changed cable, USB 2Gb format FAT32
Note: before reset factory my DVD car still read USB
Thanks
Click to expand...
Click to collapse
..............
namduong81 said:
..............
Click to expand...
Click to collapse
no body help me......