Hi guys,
After having resurrected from brick 2 OnePlus One and an LG G2 i'm struggling for the first time with a MTK of a friend, it is a 1:1 clone of Galaxy Note 3 MT6589, the producer would seem to be HDC and rom correct JSS15J.N900UBUBMJ2.
After flashing a rom if we turn on the device the screen lights up but remains black and a blue LED flashes for a few minutes, if the connect to the charger appears the battery image that slowly recharges as if I connect it to the PC after installing MTK VCOM drivers is seen as "Storage Device mass " on Windows XP and Windows 10
It's bricked? what can I do? any suggestions?
These should be the characteristics of the device
MTK6589 Quad Core 1.5GHz Cortex A9 + SGX544 GPU
1G Ram + 8G ROM
5.7 inch Touch Screen Resolution 1280 * 720
Single SIM Cards
Related
Hi
I am new to this thread and am having problem with my android tablet...
I have Nextab pro 2 android tablet with following specifications:
Processor: Allwinner 1.5 GHZ
ram: 512mb
storage: 4gb flash built in micro sdhc card slot
display:7.0'' TFT LCD (800 x 400),capacitive touchscreen
networking: Wi-Fi IEEE 802.11 b/g/m
mini HDMI, type C
audio output:3.5mm headphone
PC interface: usb 2.0 Hi-speed
android version:4.0.3
power: rechargeable li-poly battery power adapter (DC 5V)
model no:t01a
it was working fine a few days aga but one day it turned off own its own and now when i tried to start it it got stucked at the android logo screen..
i even tried to get into the recovery mode but it also got stuck at the android logo with a red hazardous symbol on it...
plz help..
thanks in advance....
my phone namely take km s200 fell on ground by wife, then it was powered-on but later it got off,
now i think its bricked not powering on. when i try to attach it by date cable to my win7 it installs drivers showing error 'qhsusb_dload no driver found' error.
(the phone specs are: Processor- 1.5 GHz Qualcomm MSM8260 processor, Adreno 220 Graphics.)
any guide? suggestion? method? way? best regards.
Greetings,
Is anyone familiar with new brand tablet Tesla H7
OS: Android 4.2
Processor: Intel Atom Z2580 (2.0 GHz)
I have one such device, and after seven days of use is stuck on Intel logo when i Power On device
I contacted the manufacturer about some info but he refuses to direct me to a solution.
From my research I found another almost similar devices by shape and hardware spec.
Banghó Aero
TECLAST P79HD
I found and upgrade Telcast firmware pass without problem (using Phone Flash Tool).
After Android successfully boot i see in MyComputer mounted storage while device connected over USB so i concluded upgrade proccess is OK BUT screen on device is black and do not hear a sound when i turn up sound on max with hardware button
ADB shell from console is available.
any proposal?
Thanx
I have a old computer with this specs:
Processor: Intel core 2 duo E4500
Ram: 6GB DDR2 800
Gpu: GTS 8800
Mobo: Asus P5N-E SLI
Error message:
intel_powerclamp: Intel powerclamp does not run on family 6 model 15
intel_rapl: driver does not support CPU family 6 model 15
:/
I have the same CPU and installed Remix OS on a old Acer Extensa Notebook. Even if i get that error message at boot it's working fine. Only issue is since Android 6.0 came it will freeze and force me to reboot if i suspend\sleep the Notebook, it's annoying but it's still functional.
Sent from my Extensa 5635ZG using Tapatalk
Thanks for the answer. What should I do then? I need to wait and someday this message will disappear?
I think we all are gettings this message, when booting , i am not paying attention to it any more. Maybe in some future update it wiil go away by its own
logosA using K012 with tapatalk
I tried several Laptops, getting this message about powerclamp and stepping, and rebooting afterwards. Should an installation otherwise run fine on Core2Duo laptops? What about Centrino (Pentium M) ? too old, aren't those? Same Harddisk put into an IntelCore boots fine. Thanks
I am getting the same (or similar, I don't really remember) message on an i3 540, so this is not limited to your processor.
Hey guys, newbie here. I have this phone that i flashed a MiUi 8 custom rom. Then after the flashing the touch got really messed up.
I searched for possible fix but nothing works. I tried flashing the zip using pc but it requires USB debugging. Since i cant use my touch i cant open dev options and check USB debugging. Thaaanks. A reply is highly appreciated!
SPECS OF MY PHONE:
5.5" HD IPS Display
Android 6.0 Marshmallow
1.3GHz Quad Core Spreadtrum SC7731
Mali-400MP GPU
16GB ROM
2GB RAM
13MP Rear + 8MP Front Camera (LP)
8MP Rear + 2MP Front Camera (MM)
Wifi, BT 2.1, 3G HSPA+
5,000mAh Removable Battery
You can try with USB OTG adapter in order to try to control your device with mouse .
I'm not sure if your device support otg but you can try : ) ...
For Example:
https://www.youtube.com/watch?v=fSINaxC5ZQo