I've got this device from a friend, he asked me to help him to fix it.He bought new device and started to mess around with it. Rooting, installing CM7 and, maybe, smthng else. Thant the device started to miss some touches. So he did unregistered the device. From what i've seen on this forum, it can be caused by 5\10 multitouch driver. So i tried to use 8 fail boots method to reset the device, it didn't helped me. Than i tried this http://forum.xda-developers.com/show....php?t=1402190 method - it didn't helped me either. Does this two solutions guarantee to restore original 2 touches driver? Do i need to do something else? Or he have to purchase new touch screen panel?
P.S. I have a 16 Gb version
Have you read the already existing discussion about this?
asawi said:
Have you read the already existing discussion about this?
Click to expand...
Click to collapse
Yeah. I read all i could find. Some of them say, that i popped out my microSD card and touch screen started to work. The other ones talk about 10 points touch screen driver issue. That was my question - will device factory reset reflash the old, 2 point touch screen driver. If it wouldn't - i'll have to do this by myself - i haven't yet figured out all the details - to much new and unknown staff. But if it would - probably, this tabled need new touch frame. The problem is - i don't really know, what exactly had been done to the tablet.
Read it again! Restoring to original will not reset the touch firmware. The discussion a couple of posts below this at this moment tells you waht you need to do, or at least what you can try.
Edit:
Better post link to topic even though it's just few lines down right now
http://forum.xda-developers.com/showthread.php?t=2049326
asawi said:
Read it again! Restoring to original will not reset the touch firmware. The discussion a couple of posts below this at this moment tells you waht you need to do, or at least what you can try.
Edit:
Better post link to topic even though it's just few lines down right now
http://forum.xda-developers.com/showthread.php?t=2049326
Click to expand...
Click to collapse
Thanks! That solved the problem
Related
Good
Searching the internet I came here to change the rom of my phone, use the hard reset and did not have any problem in the process, then asks me to restart the phone, restarted, and when a screen turns white and does not come out of it, no more than anything.
I'm a little desperate now, I know there is a high-value mobile but it cost me to raise the money to buy it, I hope you have a solution and can help me.
From already thank you very much
PS: sorry for my bad English, I am South American
Sounds like you flashed and incompatable ROM or didn't use hard_spl either way go over to the htc official website - click support find your device and it will list some stock ROMs download an official ROM using the S/N from underneath the battery - Make sure the battery has plenty of charge - plug into your PC and load the stock htc ROM file this should take you through all the standard ROM flash info and will then flash the stock ROM onto your device. Hopefully this will flash back to stock for you and no more white screen.
Good luck and let us know how it went
warlordxxx said:
Sounds like you flashed and incompatable ROM or didn't use hard_spl either way go over to the htc official website - click support find your device and it will list some stock ROMs download an official ROM using the S/N from underneath the battery - Make sure the battery has plenty of charge - plug into your PC and load the stock htc ROM file this should take you through all the standard ROM flash info and will then flash the stock ROM onto your device. Hopefully this will flash back to stock for you and no more white screen.
Good luck and let us know how it went
Click to expand...
Click to collapse
good
I think that what you say is only for original phone htc diamond 2, since according to official rom I read are for the real htc diamond 2.
The mine is not original, as it says is a Chinese clone t5388i, please follow the screen in white, would greatly appreciate if someone helps me out of this problem is quite afflicted.
Again sorry for my bad English
sorry missed the clone bit on your topic . I don't have a clone myself so no ideas if the hard reset works. Might be a good idea to post which ROM you flashed to it
good day
the mobile screen just stayed white and does not know how I can flash now, there will be someone who has been the same and have a solution? I appreciate it, I would be very helpful.
Greetings
HTC_NEW, please check this topic. It's dedicated to the clone phones (except the T5388++ who has it's own topic)
There is a tool called k3AID available who could help you. It's posted in that topic about 50 posts ago. I have a copy if you need it.
There is also another possibility to do a blind flash. This means the screen is not working but the phone can still be flashed. First thing is get the correct firmware for your phone because each time you flash the phone can get bricked / defect.
If my feedback helps you to solve your problem, please give me a thanks on the post.
Eer said:
HTC_NEW, please check this topic. It's dedicated to the clone phones (except the T5388++ who has it's own topic)
There is a tool called k3AID available who could help you. It's posted in that topic about 50 posts ago. I have a copy if you need it.
There is also another possibility to do a blind flash. This means the screen is not working but the phone can still be flashed. First thing is get the correct firmware for your phone because each time you flash the phone can get bricked / defect.
If my feedback helps you to solve your problem, please give me a thanks on the post.
Click to expand...
Click to collapse
hello friend
Reading that topic and searching for the tool by
internet gave me great hope, many users
have managed to solve the same problem, as no
I have a good English I can not understand how it's done
the process, did you guys could help me with a small
tutorial on how to fix my phone with that program?
I enter the program is that you give to download mode and
then I get 'EU entry Not calibration mode! (Mode =
0x00) 'and then does nothing else, I hope I can
help, thanks from now!
hello
I finally entered the discharge mode and while carrying on the idt went for something to eat when I returned I showed up he was 100% complete, the phone went off and did not catch more! Does anyone know it could happen? Is there any way to restart?
please help
K3 AID program
reeprich said:
OK - I can summarize my experiencies:
IDT flash... I think everybody who is doing this experiments have this software...
K3AID... h++p://www.ulozto.cz/6556122/k3firstaid-exe
can switch phone to "download" state even if the HW keys are not working
it suppose working ActiveSync connection (downloaded from mobileuncle com) not my own sw...
Sometimes may be a bit dificult to get K3AID working.. it can show some error message like "RTM state Error" - You need to install h++p://www.ulozto.cz/6556123/cabviaactivesync-1-5-setup-exe
and h++p://www.ulozto.cz/6556124/gb-ppc-2-1-3-20090929-cab
it is only summarize of my experiences - none of this utility is mine, so use it on your own risk
Click to expand...
Click to collapse
@HTC_NEW: Did you do the following steps according to reeprich instructions? What was the end result?
I did read that you used the calibration menu but I expect that you should use the download firmware menu. Is that available? ( I had the software installed but my virus scanner complained that there is a virus in the tmp file...) What's more important if your phone does not work anymore... Please be aware that this is a possible virus.
Removing the battery for a couple of minutes can help for restarting the phone.
htc new
I have done the same thing with my t5388i clone from china.
I tryed to flah the ROM and now I have the white screen.
I used the SOLONOMI t5388i rom, and now it is BRICK - white screen.
Did you get your phone working back ?
Now i´m trying to use other ROM´s , but until now no success.
I used the SOLONOMI t5388i rom, and now it is BRICK - white screen.
Hi,
I had the same problem.
I used the rom postet from parabellum20000 (post # 1354) in this thread:
http://forum.xda-developers.com/showthread.php?p=8573304&highlight=Electronic+star#post8573304
parabellum20000 said:
Electronic star finally sent me (what they claim to be) SD ROM for t5388i. (99.3MB) I personally do not want to verify if it is truth, I am the one fortunate owner of perfectly (in some degree) working phone. Please feel free to use it on your own risk and share results if possible.
http://www.mediafire.com/?ymgvo8bf2t3v4c5
P.S.Please remember, flashing your phone with a wrong ROM is the safest way to brick (damage) it. So do not do it if it isn’t really necessary!
Click to expand...
Click to collapse
I hope this rom helps you to alive your phones again.
Cheers
5290
Hey guys,
Long time reader, first time poster. I managed to brick my SGSII, so the little phone/computer icon came up. I put the phone into download mode but Odin doesn't recognise it is there, and that super one click unbrick programme didnt work either. Any ideas?
Much appreciated.
edit: fixed it myself. please delte
How did you solve it?
petter11 said:
How did you solve it?
Click to expand...
Click to collapse
Probably used the forum Stickies, "Search" function, or "Google".
Should have used it first before panicking and posting another "help. I'm bricked!!" thread.
At least he's sorted, but these type of posts where Users have asked for help, eventually found the answer somewhere else, but not bothered to post their actual fix
I have a problem and hope somebody have a solution.
My S3 was updated to JB. Then i uses CF Auto Root to root it. After Odin, the phone rebooted and the Samsung S3 wording started to flicker and get disorientated from the screen. Then it went blank. I tot it freezes and removed the batt. Then i redo again. The same thing happen and i leave it there then after about 8-10s, the phone reboot and started off from the languge selection. But touchscreen died.
So i install the stock rom again thinking is FW corrupted, Problem still there. I try root with CF Root 6.4, Problem still there. I install stock ROM again. Problem still there. Now my FW is official but counter is 11. I see a problem with bring back to Samsung.
I also removed batt, remove sim and all sorts of stuff but problem still exist. Bascially stuck at the start up languge selection screen and touchscreen dead
So hopefully somebody got a solution before i take the last action of bring back to samsung. Thks
Mine too!!!
Did you use the correct version of CF root??? I accidentally flashed the wrong one because it was right next to the correct one. The exact same thing happened to me!!!!!!!!!!!! I think the touch screen controller is dead. I am going to look at the Log to see what's happening. Does yours also take a while to boot or to load recovery?!!
CryptXus said:
I have a problem and hope somebody have a solution.
My S3 was updated to JB. Then i uses CF Auto Root to root it. After Odin, the phone rebooted and the Samsung S3 wording started to flicker and get disorientated from the screen. Then it went blank. I tot it freezes and removed the batt. Then i redo again. The same thing happen and i leave it there then after about 8-10s, the phone reboot and started off from the languge selection. But touchscreen died.
So i install the stock rom again thinking is FW corrupted, Problem still there. I try root with CF Root 6.4, Problem still there. I install stock ROM again. Problem still there. Now my FW is official but counter is 11. I see a problem with bring back to Samsung.
I also removed batt, remove sim and all sorts of stuff but problem still exist. Bascially stuck at the start up languge selection screen and touchscreen dead
So hopefully somebody got a solution before i take the last action of bring back to samsung. Thks
Click to expand...
Click to collapse
Hi
I am also in the same boat, any solution for this problem ?
Best regards
Sounds like u fried ur LCD touch. Hope u have insurance.
Sent from my SCH-I535 using xda app-developers app
Odp: Touchscreen not Working after rooting
I suppose wrong version used.
Sent from my washing machine...straight from the tumbler...
Please read forum rules before posting
Questions and help issues go in Q&A
Thread moved
Thank you for your cooperation
Friendly Neighborhood Moderator
My working solution
Hi, I had the same problem and the only one solution I've tested is changing the touch driver on the touch module. All you need is a broken touch (the donor) and a lot of patience.
Step1. Disassemble the working phone.
Step2. Carefully take out the touch module (here you need a lot of patience and time). DON'T TRY to change the driver on the assembled phone because the display will be destroyed. I speak from experience.
Step3. After the module is out unplug the touch panel from the display and blend out the driver.
Step4. Now you can change the driver. NEVER try to change the driver when it is on the display.
Step5. After finished changing the driver repeat all the steps in the reverse order.
It is working 100%.
Sup
lores79 said:
Hi, I had the same problem and the only one solution I've tested is changing the touch driver on the touch module. All you need is a broken touch (the donor) and a lot of patience.
Step1. Disassemble the working phone.
Step2. Carefully take out the touch module (here you need a lot of patience and time). DON'T TRY to change the driver on the assembled phone because the display will be destroyed. I speak from experience.
Step3. After the module is out unplug the touch panel from the display and blend out the driver.
Step4. Now you can change the driver. NEVER try to change the driver when it is on the display.
Step5. After finished changing the driver repeat all the steps in the reverse order.
It is working 100%.
Click to expand...
Click to collapse
So u must pay to buy a new touch module?
Dewasatya said:
So u must pay to buy a new touch module?
Click to expand...
Click to collapse
Pay yes unless its under warranty and root voids warranty .
OP self inflicted damage nothing to do but pay and learn .
jje
Root your Device
To Reset binary counter when touch is Dead Click here
Now Flash with a Stock Rom
And CLAIM Your Warranty
HI,
I apologise if this is the wrong forum, but I cannot find anything specific to my device, and all threads I found so far that deal with flashing might as well be in Greek. Please move it to wherever is appropriate if this is the wrong place.
The problem;
My Onda v140 (I think it's an Elite but I got it second hand and I don't know for certain) bricked over night. I turned it on and it is stuck on the android animation. Tried a couple of times, no joy.
Its OS is (or WAS) Android 4.01.
I found firmware for the v140 elite and would like to try flashing the thing to fix it, but I have absolutely no idea where to start. I don't know any of the jargon beyond the word flashing, and have had little luck on the internet except for a video which might have been helpful except that it is in German and I don't speak German.
Can anyone point me to some sort of beginners guide to this please?
Hope this helps : -
http://colonelzap.blogspot.de/2012/01/onda-vi40-firmware-flashing-guide-by.html
McNexus said:
Hope this helps : -
Click to expand...
Click to collapse
link removed from your quote as the forum wouldn't let me post with it there
Thanks, but that guide doesn't work. I spent half an hour holding the middle button and pushing the power button without it doing a dicky bird. I also tried running livesuite as administrator in case that would help.
Nothing.
Hey guys,
I see that there are a few incidents of this occurring having read the forum and Google. Some advise the device needs 'j-tagged' others seem to have been able to eventually gain access to the Recovery mode.
Here's the low down; S3 was flashed with Cyanogenmod 10.1 and was working fine for months. Last night, as normal, I switched over batteries to a fully charged one. On restarting the phone I was presented with warning about a firmware upgrade that went wrong (can't remember the exact wording as it was late and I was in bed at this stage).
On seeing the warning I tried restarting the phone but same again and then I set it down to deal with it today. Woke up to a white screen and grey lines. I can't get into Recovery mode.
Now I didn't try to upgrade the firmware or anything else, this message just appeared upon changing the batteries and therefore a power cycle.
Odin seems to see the device on Com 5 but after that I am not sure what else to do.
How can I flash a new ROM without Recovery access? Any ideas?
Thanks in advance guys,
Reply to identical question .
Read the stickied basic faqs and guides .
Flash a stock rom via Odin .
JJEgan said:
Reply to identical question .
Read the stickied basic faqs and guides .
Flash a stock rom via Odin .
Click to expand...
Click to collapse
Cheers mate.
OP, there was no reason to post this thread twice. Please in the future 1. search before posting. 2. Post only once, not multiple times
Please take a moment to review the forums Rules
Problem sorted. Thanks
Al Bino said:
Problem sorted. Thanks
Click to expand...
Click to collapse
Just an update for those that may have the same issue.
Sent the phone back to Samsung and they replaced the motherboard ("PBA MAIN") and LCD ("OCTA LCD SVC/RW").
Not sure why they replaced the LCD unless they damaged it replacing the motherboard? Either way phone was returned in new condition as I had originally had a few marks on the chrome strip around the phone, now gone. So well pleased.