Up until tonight I have never had an issue with Odin..
But for some reason Odin will not recognize my Verizon galaxy note 2. I have tried troubleshooting and had no luck.
Then I tried to plug in my GS3 and Odin would not recognize that either..
How do I fix this?
Thanks to all in advance!
Sent from my SCH-I535 using xda premium
Plug in your phone and go into the device manager. Delete the driver and unplug your phone. Download a fresh new driver from Samsung and install it. Restart your computer and connect your phone. Should work now, don't have a note to test but that usually fixes anything driver related which is most definitely your case. That or you need a new cable.
Edit, I just re-read the post and you probably need a new cable. Sometimes cables will still charge a phone but not carry data. Make sure you get a good one and try it again.
Sent from my SPH-D710 using Tapatalk 2
Problem solved... through trial and error I found out that I have to:
1. Open Odin
2. Put my phone into Odin mode
3. Connect phone to PC.
4. The comport then populated.
Problem solved!
Sent from my SCH-I535 using xda premium
What did you do before you did that? Lmao..
Sent from my SPH-D710 using Tapatalk 2
jlear3 said:
What did you do before you did that? Lmao..
Sent from my SPH-D710 using Tapatalk 2
Click to expand...
Click to collapse
I basically was doing steps 3,2 then 1. I know I know.... what a dumb a$$!!
Sent from my SCH-I535 using xda premium
Lol as long as you're in working order that's what mattered. Plus everything's a learning experience.
Sent from my SPH-D710 using Tapatalk 2
Related
My usb port isn't working it'll charge but that is it can I unroot somehow with out it
Sent from my ADR6400L using XDA
Try a different cord.
Sent from my ADR6400L using XDA
Definitely try that. If that doesn't help, there is another way and feel free to add me on gtalk for a walkthrough - [email protected]
Sent from my ADR6400L using Tapatalk 2
It wasn't the cord it was my phone once I got the no hboot to flash it all started working but then the newly rooted phone's usb doesn't want to work now. I don't have computer I have to use someone else's for the time being
Sent from my ADR6400L using XDA
I'm trying to flash back to stock use Odin and AIO toolbox and it keep booting up on the Samsung screen and wont past from there already spend 2 hrs so now I'm so frustrated
Sent from my SGH-I997 using xda premium
Please give a little more detail what your doing? You could be flashing the wrong stuff...
Sent from my SGH-T959 using xda app-developers app
The s1_odin_20100512.pit and T959UVJFD .tar. is there anything else I need to flash
Sent from my SGH-I997 using xda premium
I've only used Odin so I have no input on the AIO tool, but how long is the Odin flash taking? Is the Re-Parition option checked (should happen by default when you select the PIT)?
It takes about 3 mnts and repartiton is check but when its Donne it just bootloops on the samsung screen
Sent from my SGH-I997 using xda premium
Odin v1.8 is included as part of the toolbox.
Go to the toolbox thread, last post and there is a download of a older version of Odin.
What ROM are/were you coming from?
O try that one 2 and still same result
Sent from my SGH-I997 using xda premium
Coming from stock gingerbread but the phone some how wont connect to the wireless and data so I decide to go back to stock but now it wont turn on :banghead:
Sent from my SGH-I997 using xda premium
Are you coming from ICS, or Gingerbread? Did you flash the Gingerbread bootloaders by chance?
You could try to find the Froyo bootloaders, use Odin to flash that, and then try to flash the .pit and JFD files to go back to stock. I don't think that should be the problem, but it couldn't hurt. I know you're trying to get back to stock, but you could try to use fishman's odin image for his rom: http://forum.xda-developers.com/showthread.php?t=1441976
I've used it before, and can verify it's good to go.
Can you get into recovery? You won't have CWR, but I'm just curious if you can even get to the stock Samsung one (like if you were going to root the phone the old fashioned way).
coming from gingerbread .... and try all that already but at the end when the phone try to reboot it saids that une of the its not recognize ... i dont know if that have any thing to do ... but odin can read my phone
I have to ask... your signature says SGH-I997 (Samsung Infuse 4G). I hope you haven't been trying to flash the Vibrant packages on that all this time, heh.
no i have a infuse and a note but these phones is my friends and im trying to fix it for him but seems like i waont be able to do it the good thing its that i stil can get in download mode
Couldn't hurt to try a different usb port on your pc, I have trouble with my faster port. Works fine when I use the standard port.
Sent from my SGH-T959 using XDA Premium App
That didnt work either
Sent from my SGH-I997 using xda premium
tupirujp said:
That didnt work either
Sent from my SGH-I997 using xda premium
Click to expand...
Click to collapse
Maybe try a different version of Odin. I have heard some people have problems with certain versions.
Sent from my SGH-T959 using XDA Premium App
I try 3.1 , 3.7 , 3.1.8 and still :banghead:
Sent from my SGH-I997 using xda premium
tupirujp said:
I try 3.1 , 3.7 , 3.1.8 and still :banghead:
Sent from my SGH-I997 using xda premium
Click to expand...
Click to collapse
This is the Odin I never have trouble with, it's actually Odin3 v1.3. Like I said it never fails me, knock on wood. Download link is below \/
http://forum.xda-developers.com/attachment.php?attachmentid=534656&d=1299385957
Sent from my SGH-T959 using XDA Premium App
Have you tried Heimdall by any chance? It has worked for me before.
http://forum.xda-developers.com/showthread.php?t=1278683
Although it shouldn't matter since the flash doesn't touch either of them, maybe try removing the SIM and the external SD temporarily.
I also second ZeroG1's suggestion for Heimdall.
Is it the vibrant 3g (t959) or the 4g (t959v)? They are very different.
Sent from a galaxy far far away......
So, I rooted my GS3 with this method http://www.youtube.com/watch?v=XoEVDgjTTdg&list=PL7011CD883D5201B8&index=12&feature=plpp_video
Everything went perfectly and was successfully rooted.
I then made a backup of my phone.
I tried installing a rom and it had errors, so I restored my phone and it was successfully stored and hit restart phone.
Thats where I am at now. The phone shut off, and wont turn back on. I have it on the charger and there is no charging light, nothing. tried pulling the battery, entering recovery. Nothing works.
I have no idea what happened or how to get my phone back on.
Please help.
Thank you.
How about download mode and install the stock ROM?
I cant get into downloads mode either.
Nothing works.
I plug in the phone to my pc and it recognizes it.......sort of.
Doesnt show as a device to transfer files, etc.
Any other suggestions?
This is so frustrating.
Try dawnload mod 3 combo batons volume dawn power and home and flash stock rom whit odin
Sent from my GT-I9300 using xda premium
muhamet said:
Try dawnload mod 3 combo batons volume dawn power and home and flash stock rom whit odin
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
You mean hit the volume down home and power button?
Nothing happens when I do that.
My screen never turns on.
Pull aut batthery and wait 10sec and try again
Sent from my GT-I9300 using xda premium
muhamet said:
Pull aut batthery and wait 10sec and try again
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
Tried that.
Even waited 10 minutes
Was your phone charged enough or did the battery run out while u were flashing?
Try putting just the battery in the freezer for a few minutes in a plastic bag.10 min perhaps. And then try to charge it. If charging light comes on, let it charge well before turning on phone. Make sure its not wet when u put it back in phone.
Sent from my EVO using xda premium
You haw international version of Sgs3 ???
Sent from my GT-I9300 using xda premium
The battery was around 40 %
I even tried putting the phone on the charger for 10 minutes and still nothing.
Phone wont boot at all.
What rom you whant t flash???
Sent from my GT-I9300 using xda premium
I was trying this one, http://forum.xda-developers.com/showthread.php?t=1738527 but it failed.
So I restored my phone from a backup.
The charge light not comming on, phone not turning on is independent of the phone os. Try putting battery in freezer for a few minutes and then try to charge.
Sent from my EVO using xda premium
This rom is for international version of Sgs3.you haw other saction in Xda for att,t mobile sgs3.
Sent from my GT-I9300 using xda premium
Do you have the international version?
Sent from my GT-I9300 using xda premium
Look video dhont hawe international
Sent from my GT-I9300 using xda premium
nodstuff said:
Do you have the international version?
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
No I dont.
I just realized that there were 2 different forums.
1 for sprint at&t, etc, then the GSM ones.
Probably why the rom didnt flash and then aborted.
Either, way, I then wiped everything and then restored from my factory rom.
It said it was successfull, and I hit restart.
Now my phone does nothing.
muhamet said:
Look video dhont hawe international
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
OK I see the problem, he flashed an international version rom on a us version.
Well best of luck with that one OP, in future make sure you are flashing the correct version.
Sent from my GT-I9300 using xda premium
I think ther you wil find somthing for unbricking.
Sent from my GT-I9300 using xda premium
I was using Odin to root my i777 on my laptop and about half way through the flash process my laptop died on me I had forgot to plug it in. I know stupid move but know I can't even turn my phone on it won't even go into download mode. Please I need help if possible I have read some about using a jig but not for sure it would work on my phone at this point.
Sent from my SAMSUNG-SGH-I727 using xda premium
I'm pretty sure that thing is HARD BRICKED, mainly cause it powered off during Odin (big no-no). Hopefully I'm wrong and someone else can chime in.
You can always try a jig before giving up
Bobbyc75 said:
I was using Odin to root my i777 on my laptop and about half way through the flash process my laptop died on me I had forgot to plug it in. I know stupid move but know I can't even turn my phone on it won't even go into download mode. Please I need help if possible I have read some about using a jig but not for sure it would work on my phone at this point.
Sent from my SAMSUNG-SGH-I727 using xda premium
Click to expand...
Click to collapse
Sure u have an i777? Your signature says otherwise...
Yes I have an i-777 I am using my other phone to post with
Sent from my SAMSUNG-SGH-I727 using xda premium
Send it to mobile tech videos.
Phalanx7621 said:
Send it to mobile tech videos.
Click to expand...
Click to collapse
Yeah I'm thinking that's going to be the best just don't know if $50 is to much to be spending on that phone it was just a backup anyway.
Sent from my SAMSUNG-SGH-I727 using xda premium
Bobbyc75 said:
Yeah I'm thinking that's going to be the best just don't know if $50 is to much to be spending on that phone it was just a backup anyway.
Sent from my SAMSUNG-SGH-I727 using xda premium
Click to expand...
Click to collapse
Well the rest is all on u. Good luck
Im sure you can repair it... Try jtag service... Search ebay.. Sure it helps..
Sent from my SAMSUNG-SGH-I777 using xda premium
I get this error while trying to root after starting run.bat in motochopper. What can I do??
Sent from my SCH-I545 using Tapatalk 4 Beta
I have also unchecked all "verify apps" in security and dwv. Options.
Sent from my SCH-I545 using Tapatalk 4 Beta
It happened to me too the first time. But I forgot why...I know I had to run motochopper twice though
Sent from my SCH-I545 using xda app-developers app
I've closed and restarted motochopper mult. Times. Re started phone and computer as well.
Sent from my SCH-I545 using Tapatalk 4 Beta
Did you accept connecting to your pc and tgen put the check mark in "always allow this connection" or whatever it says?
Sent from my SCH-I545 using xda app-developers app
How do accept connecting? It doesn't give me a pop up on my phone to accept it
Sent from my SCH-I545 using Tapatalk 4 Beta
ben1284 said:
How do accept connecting? It doesn't give me a pop up on my phone to accept it
Sent from my SCH-I545 using Tapatalk 4 Beta
Click to expand...
Click to collapse
Ah I had that issue as well, id toggle usb debugging while connected to the pc. If that doesn't work try usb debugging first with usb storage set to mtp then try ptp then tge message should show up
Awesome! Hope this will help me out. Ill tey when I get back home. Thanks for the info.
Sent from my SCH-I545 using Tapatalk 4 Beta
Surge1223 said:
Ah I had that issue as well, id toggle usb debugging while connected to the pc. If that doesn't work try usb debugging first with usb storage set to mtp then try ptp then tge message should show up
Click to expand...
Click to collapse
ok, this didn't work for me..i even tried reinstalling my usb drivers and still no luck. Also, how do you go about changing the usb storage from MTP to PTP? I cant find this option anywhere unless i'm just overlooking it somehow.
Click the usb icon in the notification bar to change it. I believe thats where its at
SCH-I545 using Tapatalk 2
hexitnow said:
Click the usb icon in the notification bar to change it. I believe thats where its at
SCH-I545 using Tapatalk 2
Click to expand...
Click to collapse
ben1284 said:
ok, this didn't work for me..i even tried reinstalling my usb drivers and still no luck. Also, how do you go about changing the usb storage from MTP to PTP? I cant find this option anywhere unless i'm just overlooking it somehow.
Click to expand...
Click to collapse
Another way is going to settings>storage when you're connected by usb then hitting the menu button I believe that brings up a usb option.
Sent from my SCH-I545 using xda app-developers app
ben1284 said:
I get this error while trying to root after starting run.bat in motochopper. What can I do??
Sent from my SCH-I545 using Tapatalk 4 Beta
Click to expand...
Click to collapse
Did you accept and install a recent ota 'cuz if you did, you can't install motochopper.
Sent from my SCH-I545 using xda app-developers app
ciniob said:
Did you accept and install a recent ota 'cuz if you did, you can't install motochopper.
Sent from my SCH-I545 using xda app-developers app
Click to expand...
Click to collapse
No, I didnt take the me7 update..im still on mdk.
Sent from my SCH-I545 using Tapatalk 4 Beta
Have you tried a different usb port? If I remember right some people had to use one of the usb ports in the back.
SCH-I545 using Tapatalk 2
hexitnow said:
Have you tried a different usb port? If I remember right some people had to use one of the usb ports in the back.
SCH-I545 using Tapatalk 2
Click to expand...
Click to collapse
This and are you using the USB cable that came with the phone? If not, try that. I've seen that be the issue in the past.
Yes, tried all ports in my comp. I am using a nexus 7 usb cable, ut that one worked to flash the prerelease kernal to get the thiscpoint. Would it work for that, but not for motochopper?? Ill try the stock cable judt to be sure though
Sent from my SCH-I545 using Tapatalk 4 Beta