I am running an old MYN Warm rom, have hboot 1.04 and would like to get to current version on the Evo 3d. I am s-off and I think i rooted on the revolutionary method.
Is there a flashable rom to get me to the last available rom on the 3D? I am putting it on ebay and need to get it on stock I think.
thanks
texasez said:
I am running an old MYN Warm rom, have hboot 1.04 and would like to get to current version on the Evo 3d. I am s-off and I think i rooted on the revolutionary method.
Is there a flashable rom to get me to the last available rom on the 3D? I am putting it on ebay and need to get it on stock I think.
thanks
Click to expand...
Click to collapse
It's up to you how you want to sell it. There is an option for saying your phone is rooted when you make the listing so you can leave it as-is, or if you'd rather sell it unrooted and locked, you can run an RUU.exe to get it to factory specs.
If you want it completely stock and on the latest OTA, go here: http://shipped-roms.com/index.php?category=android&model=Shooter
If you have sprint, download the file labeled: RUU_Shooter_ICS_35_S_Sprint_WWE_2.89.651.2_Radio_1.09.00.0706__NV_NV_SPCS_1.43_release_271101_signed.exe
If you have a GSM phone, I'm not sure what the latest release is. If you're on GSM, do NOT run that RUU on your phone or you'll be left with a brick.
w0rdOo said:
It's up to you how you want to sell it. There is an option for saying your phone is rooted when you make the listing so you can leave it as-is, or if you'd rather sell it unrooted and locked, you can run an RUU.exe to get it to factory specs.
If you want it completely stock and on the latest OTA, go here: http://shipped-roms.com/index.php?category=android&model=Shooter
If you have sprint, download the file labeled: RUU_Shooter_ICS_35_S_Sprint_WWE_2.89.651.2_Radio_1.09.00.0706__NV_NV_SPCS_1.43_release_271101_signed.exe
If you have a GSM phone, I'm not sure what the latest release is. If you're on GSM, do NOT run that RUU on your phone or you'll be left with a brick.
Click to expand...
Click to collapse
How do I install an exe file. I tried a zip file of the same rom but it would only show that it updated but nothing really happened. I am on sprint.
thanks
You can find a working link to latest sprint 2.89 Ruu in my HTC Unlock guide (see signature for links & details), Football pulled the Ruu thread apparently.
Just put the phone into "fastboot USB" mode, connect to pc and run the Ruu.exe from Windows OS. It will update firmware, radio, hboot, etc and retain s-Off.
Hopefully u never ran any of the leaked Virgin Mobile firmware. That's a whole separate problem that can't be fixed with just the Ruu.
Sent from my "Up all night, Sleep all day" EVO3D!
Related
I am currently running cleanROM 2.2 and I would like to go back to stock completely. My phone is currently S-Off. what is the simplest procedure to return to stock?
Are you on Sprint? If so, the easiest way is to flash the RUU. Football posted it here. That's the most recent once with HBOOT 1.50. You will still retain s-off after flashing the RUU, but it will say LOCKED at the top. You could probably also use the older RUU (which you can find by searching for threads created by football in cdma evo 3d dev forum). There is an adb command to turn s-on. It's in the guides about returning to stock posted in cdma evo 3d dev forum.
RUU (ROM Update Utility) is the best method to return a device completely stock. I know all three Sprint EVO 3D software versions have had a leaked RUU by Football and all three are mirrored on goo-inside.me : http://goo-inside.me/shooter/ruu/
Also, if you're on a Mac or Linux, the .exe will not be as easy to run. The .zip versions of the RUU files are also available at that same link on goo-inside.me. Simply place the .zip file onto the root of the sdcard and boot into the bootloader. It will automatically scan and verify the .zip file then prompt whether or not you want it to be loaded.
Hope that helps!
ok so I just use the 2.08.651.2 file and put it in my memory card and flash it through bootloader? so my rooted status and s-on will be removed?
wow! you are trying to go back to stock and im trying to root my phone unfortunately i have the new update 2.3.4 i cant root yet if you want we can trade lol
cal4877 said:
wow! you are trying to go back to stock and im trying to root my phone unfortunately i have the new update 2.3.4 i cant root yet if you want we can trade lol
Click to expand...
Click to collapse
O wow I didn't know that I won't be able to root again. I am just gonna update using the older PG file then to get 2.3.3 I guess.
This thread is regarding RUU for HTC devices.
I've seen some similar threads but could not fully get the answer I was looking for.
From what I already understand, a RUU updates the ROM, the H-BOOT possibly and updates the recovery with a stock recovery. It cannot do anything that a BL-Unlocked user cannot do through adb or fastboot because the RUU uses only adb and fastboot. This means that the RUU does not (And cannot) update the radio. Am I correct in this?
And if so, what is the point of updating the RUU once you start flashing custom ROMs because they also flash the /system and /boot partitions and the only thing a custom ROM doesn't do is reflash the H-BOOT and the recovery.
And even if you update using a RUU for some reason (Whether it updates or if you just want to return to stock), do you have to choose the RUU that exactly matches your current radio version?
Assume for all the questions that the device is either BL-Unlocked or Stock (But S-ON either way).
Thanks in advance.
AceRoom said:
This thread is regarding RUU for HTC devices.
I've seen some similar threads but could not fully get the answer I was looking for.
From what I already understand, a RUU updates the ROM, the H-BOOT possibly and updates the recovery with a stock recovery. It cannot do anything that a BL-Unlocked user cannot do through adb or fastboot because the RUU uses only adb and fastboot. This means that the RUU does not (And cannot) update the radio. Am I correct in this?
And if so, what is the point of updating the RUU once you start flashing custom ROMs because they also flash the /system and /boot partitions and the only thing a custom ROM doesn't do is reflash the H-BOOT and the recovery.
And even if you update using a RUU for some reason (Whether it updates or if you just want to return to stock), do you have to choose the RUU that exactly matches your current radio version?
Assume for all the questions that the device is either BL-Unlocked or Stock (But S-ON either way).
Thanks in advance.
Click to expand...
Click to collapse
Hi, an ruu updates what you mentioned and a lot more. It will do things like change the splash screen, update the radio. and change the hboot which you cannot do with only an unlocked bootloader. It can do those things because its signed.
I had to use ruu's a few times, recently for an hboot downgrade to achieve s-off. Now that I have s-off I can flash any file I want in hboot asblong as its named correctly. Like a splash screen, or a lower hboot version.
Since an ruu updates the radio, it doesn't matter which version you choose, as long as its the same version you have or higher, but it won't let you flash a lower versionWith s-off I can flash any ruu version I want.
ok, so if I am currently running 2.3.4 and htc sense 3.0, does that mean that I can flash my phone with ics (4.0) as long as it is for the right phone and carrier???
HTC evo 3D with Rogers
icecursor said:
ok, so if I am currently running 2.3.4 and htc sense 3.0, does that mean that I can flash my phone with ics (4.0) as long as it is for the right phone and carrier???
HTC evo 3D with Rogers
Click to expand...
Click to collapse
Yes.
Theonew said:
Yes.
Click to expand...
Click to collapse
now, if I upgrade it through the ruu, is that the exact same upgrade that comes from the carrier? As in, even the HTC update too?
And if it is, is the ruu just the rooted phones way of updating?
Thanks
icecursor said:
now, if I upgrade it through the ruu, is that the exact same upgrade that comes from the carrier? As in, even the HTC update too?
And if it is, is the ruu just the rooted phones way of updating?
Thanks
Click to expand...
Click to collapse
Yes it is the same update. Updating with the RUU can be used either way (rooted or non-rooted). Just keep in mind that you'll lose root access after updating.
Theonew said:
Yes.
Click to expand...
Click to collapse
Theonew said:
Yes it is the same update. Updating with the RUU can be used either way (rooted or non-rooted). Just keep in mind that you'll lose root access after updating.
Click to expand...
Click to collapse
ok, so last question,
do I need hboot 1.5? I am currently running revolutionary s-off, HBOOT 1.49.1107.
Originally Posted by Theonew
Yes.
Click to expand...
Click to collapse
Originally Posted by Theonew
Yes it is the same update. Updating with the RUU can be used either way (rooted or non-rooted). Just keep in mind that you'll lose root access after updating.
Click to expand...
Click to collapse
ok, so last question,
do I need hboot 1.5? I am currently running revolutionary s-off, HBOOT 1.49.1107.
Click to expand...
Click to collapse
I'm not sure for your device, but as long as the RUU is for it, it should work (boot loader version doesn't usually affect it).
hello, i wanted to know if RUU also achieves S-ON. I need to return my droid incredible to verizon for replacement due to screen malfunction. I cannot see anything on the display, but everything inside works fine.
I had unlocked bootloader using htcdev and rooted with S-OFF running 4.1.1. I am now on stock Froyo thanks to RUU, but I still need to get S-ON and bootloader locked.
So does the RUU achieve S-ON? I have downloaded the forever SON zip file. But I dont know how to flash it using ADB. Can someone guide me.
haunteddevil619 said:
hello, i wanted to know if RUU also achieves S-ON. I need to return my droid incredible to verizon for replacement due to screen malfunction. I cannot see anything on the display, but everything inside works fine.
I had unlocked bootloader using htcdev and rooted with S-OFF running 4.1.1. I am now on stock Froyo thanks to RUU, but I still need to get S-ON and bootloader locked.
So does the RUU achieve S-ON? I have downloaded the forever SON zip file. But I dont know how to flash it using ADB. Can someone guide me.
Click to expand...
Click to collapse
The RUU does not return S-ON. What is in the zip file?
achieve S-ON on htc...
haunteddevil619 said:
hello, i wanted to know if RUU also achieves S-ON. I need to return my droid incredible to verizon for replacement due to screen malfunction. I cannot see anything on the display, but everything inside works fine.
I had unlocked bootloader using htcdev and rooted with S-OFF running 4.1.1. I am now on stock Froyo thanks to RUU, but I still need to get S-ON and bootloader locked.
So does the RUU achieve S-ON? I have downloaded the forever SON zip file. But I dont know how to flash it using ADB. Can someone guide me.
Click to expand...
Click to collapse
for S-ON try this Post ...
hey forum
i really need some help now. i have a gsm evo 3d unlocked up and running a custom rom (nonsense). now i want to return to stock, ive tried flashing the ruu for several times, but each time it says bootloader version error. so i guessed that i have to downgrade my hboot version from 1.53.0007 to something 1.49.007 or similiar. i just cant get it to work, neither with flashmaniacs way, or the manual way. in bootloader when loading the PG86IMG ist says version older update fail.each time i fail i reunlock the bootloader, so atleast i can use my phone. the worst and most foolish part of me: no nandroid backup. so i recognize my fault.
Do you have the newest ruu.exe for your region/carrier? Once you get it, boot into bootloader, connect to computer (should say fastboot usb), lock bootloader, then run ruu. That should put you at stock.
Test shooter u ruu for ics?
coal686 said:
Do you have the newest ruu.exe for your region/carrier? Once you get it, boot into bootloader, connect to computer (should say fastboot usb), lock bootloader, then run ruu. That should put you at stock.
Click to expand...
Click to collapse
i dont know wether its the newest or not, ive tried the one i got from file factory its called
RUU_Shooter_U_HTC_Europe_1.20.401.8_Radio_10.59.9020.00_10.15.9020.06_M_release_219793_signed.exe
im not sure, but i think its gingerbread. ive been searching for an ics ruu fpr europe, but havent found one yet, only one "test ruu" which is official, should i give it a go? it seems to have some minor bugs.
heres the thread
http://forum.xda-developers.com/showthread.php?t=1669104
do you know where to get a stock ics ruu for sure?
I'm in the US, so I don't know exactly. Did you look here: http://forum.xda-developers.com/showthread.php?t=1208485
Have you relocked your bootloader before flashing ruu? Bootloader must locked or relocked if you want to flash stock soft. I've flashed RUU named:
RUU_SHOOTER_U_ICS_35_S_HTC_Europe_3.28.401.1_Radio_11.77.3504.00U_11.25.3504.06_M_release_262714_signed
It's stock ics rom. Here is direct link:
http://www.filefactory.com/file/2hw...00U_11.25.3504.06_M_release_262714_signed.exe
c000ler said:
Have you relocked your bootloader before flashing ruu? Bootloader must locked or relocked if you want to flash stock soft. I've flashed RUU named:
RUU_SHOOTER_U_ICS_35_S_HTC_Europe_3.28.401.1_Radio_11.77.3504.00U_11.25.3504.06_M_release_262714_signed
It's stock ics rom. Here is direct link:
http://www.filefactory.com/file/2hw...00U_11.25.3504.06_M_release_262714_signed.exe
Click to expand...
Click to collapse
yes i relocked my bootloader each time i tried to flash. thanks alot! ive been looking for a ICS ruu for quite some while, gonna download it and try it out. hope itll work out fine.
the ones i downloaded from the filefactory link somehow didnt work, dont know why.
i really appreciate your help, thanks guys
it worked, im back to stock, so it was the old ruu which created problems. thanks
This is going to be a short and simple guide for S-OFF users that want to update to the current RUU level or refresh their phone because they are having issues like being unable to boot certain ROM's. You will not lose S-OFF by flashing the RUU.
1. Do a nandroid backup of your current ROM if you want to restore it later.
2. Download the current version of the RUU for your phone in exe or zip format from this page.
3. Run the exe version of the RUU in Windows or the zip version as a PG86IMG.zip file through the bootloader. If using the bootloader method make sure the file is named exactly "PG86IMG.zip" and placed in the root of your SD card before starting the bootloader.
There is no need to unlock the bootloader before running it if you are S-OFF and there is troubleshooting information in this post if you have problems. It may be necessary to run the RUU twice if you have a custom bootloader installed when it is run the first time. If the utility hangs after flashing the bootloader from Windows just cancel it and restart.
I recommend downloading and installing the OTA(s) immediately after flashing the RUU to get the most current firmware while still 100% stock, but the OTA firmware update(s) can be downloaded as a separate PG86IMG.zip file if you forget or can't do that for some reason.
4. Flash a custom hboot using the instructions in this post. My recommendation for a good general purpose hboot is the JBear GB 1.50.5050 version unless you are running an ICS Sense ROM like stock or Cool ICS that requires an ICS bootloader (1.57.xxxx or 1.58.xxxx).
5. Connect your phone to a PC and start the bootloader in "fastboot USB " mode, then issue the following command to flash your favorite recovery:
fastboot flash recovery recovery.img (where "recovery.img" is the name of the recovery file in your ADB/fastboot directory)
6. Boot into recovery and restore a nandroid or flash another custom ROM. You may have to wipe cache+dalvik and restart recovery if you get any error messages from the recovery program.
That's it. You're now updated or re-synced with the current firmware, the hboot that meets your requirements and your favorite recovery.
Here are some additional links that might be helpful:
4EXT Recovery OP for the Evo 3D CDMA thread with a direct link to recovery.img in the download section (not the most current version)
Current TeamWin (TWRP2) touch recovery for the CDMA Evo 3d.
Virgin Mobile OTA firmware only in PG86IMG.zip format.
Sprint OTA firmware only in PG86IMG.zip format.
ramjet73
Thanks for this.
Question,the RUU links...
Am I looking for the link with the radio he has currently on his phone?
0.97.10.0530?
3volution said:
Thanks for this.
Question,the RUU links...
Am I looking for the link with the radio he has currently on his phone?
0.97.10.0530?
Click to expand...
Click to collapse
No. That's an older GB level and the most current RUU for the Evo 3D is the 2.89.651.2 ICS version. That's the one I recommend.
Since he is S-OFF already it's easy to revert to a GB RUU if neccessary.
ramjet73
I better not mess with it,lol
This isn't anything like flashing new ROM's on my phone.
Thanks though.
3volution said:
I better not mess with it,lol
This isn't anything like flashing new ROM's on my phone.
Thanks though.
Click to expand...
Click to collapse
You're welcome.
It's not really that difficult if you are familiar with rooting and flashing HTC devices but I can understand how it might be for users coming from other brands. Samsung in particular is definitely less complicated.
ramjet73
Thanks!
Thanks for this great post ramjet. Really a great concise How-to.
Nevermind, fixed.
ramjet73 said:
No. That's an older GB level and the most current RUU for the Evo 3D is the 2.89.651.2 ICS version. That's the one I recommend.
Since he is S-OFF already it's easy to revert to a GB RUU if neccessary.
ramjet73
Click to expand...
Click to collapse
I flashed the above RUU .exe and I'll get to 10%, then my phone reboots (RUU program says "attaining bootloader" or something) and go into a bootloop. Is there a specific hboot necessary to run this. I am on 1.04.200 and s-off, 1.09.00.706
I also tried updating via the bootloader method as well..... runs well....updates like four of the ten check offs and then bootloops as well.
Edit: turns out I was flashing the wrong version, oops
Hedied4me said:
I flashed the above RUU .exe and I'll get to 10%, then my phone reboots (RUU program says "attaining bootloader" or something) and go into a bootloop. Is there a specific hboot necessary to run this. I am on 1.04.200 and s-off, 1.09.00.706
Click to expand...
Click to collapse
From experience I've discovered that the RUU.exe utility will sometimes stop after flashing the stock bootloader if it is run with a custom hboot installed, which is why I put this comment in the OP:
If the utility hangs after flashing the bootloader from Windows just cancel it and restart.
Click to expand...
Click to collapse
I've had no problem completing the RUU.exe flash if I just cancel the utility in the Windows task manager and restart it.
Others have reported that re-flashing the RUU.zip file through the bootloader also works if the original flash is incomplete.
Also, make sure that you downgrade your hboot after flashing the RUU since the stock hboot won't boot GB or AOSP based ROM's.
ramjet73
Ok one more stupid question, after successfully flashing the correct RUU my phone boots into the stock virgin mobile. How do I get into bootloader (to flash OTA update and hboot) from here since holding power and volume down button from off no longer work.
Sent from my HTCEVOV4G using Tapatalk 2
Hedied4me said:
Ok one more stupid question, after successfully flashing the correct RUU my phone boots into the stock virgin mobile. How do I get into bootloader (to flash OTA update and hboot) from here since holding power and volume down button from off no longer work.
Click to expand...
Click to collapse
Try removing/replacing the battery and then use the Power+VolumeDown buttons together to enter the bootloader.
The stock ROM has the "fast boot" option turned on in the power settings by default and that will interfere if you try to enter the bootloader after powering down from the stock ROM.
ramjet73
Thank you very much for your patience and help Ramjet. Everything went well.
Sent from my Evo V 4G using Tapatalk 2
Please excuse me this might have been asked before.
I'm currently S-Off H-boot 1.40 but still on gingerbread firmware(2.17 radio 0.97.10.0530). also flashed to Boost Mobile. My question is if I run RUU to newest build will I lose boost mobile flash?
El Queson said:
Please excuse me this might have been asked before.
I'm currently S-Off H-boot 1.40 but still on gingerbread firmware(2.17 radio 0.97.10.0530). also flashed to Boost Mobile. My question is if I run RUU to newest build will I lose boost mobile flash?
Click to expand...
Click to collapse
I honestly don't know.
There is a post by a cricket user in my rooting and S-OFF guide that says the customization is not lost for that carrier but I've never used Boost and can't speak to that.
Perhaps another Boost user on these forums has experience with flashing the RUU.
ramjet73
++sorry++
Using the bootloader procedure is, by far, the easiest way of doing the RUU process that I've encountered. From custom ROM, to stock, back to a custom ROM in less than 45 minutes.
ramjet, thank you for your contributions to our platform.
so my wife is hboot 1.40, radio version 0.97.... running a GB ROM. I need to update her EVERYTHING(you pointed me here) and get her on NegaLite BluROM. I believe I will need to update her hboot as well. At what point in this process should that be done? Do I need to be worried that her current ROM is incompatible with either the new RUU or the new bootloader? And if it is, then I just work through it all in recovery?
Very useful thread, and thank you very much, by the way.
GAPO said:
so my wife is hboot 1.40, radio version 0.97.... running a GB ROM. I need to update her EVERYTHING(you pointed me here) and get her on NegaLite BluROM. I believe I will need to update her hboot as well. At what point in this process should that be done? Do I need to be worried that her current ROM is incompatible with either the new RUU or the new bootloader? And if it is, then I just work through it all in recovery?
Very useful thread, and thank you very much, by the way.
Click to expand...
Click to collapse
Is her phone S-OFF? If so, there is a link in the OP to a post that covers updating the hboot. If not, the only way to update the hboot is to flash a more current RUU.
ramjet73
ramjet73 said:
Is her phone S-OFF? If so, there is a link in the OP to a post that covers updating the hboot. If not, the only way to update the hboot is to flash a more current RUU.
ramjet73
Click to expand...
Click to collapse
Yes she is S-off. She also already has 4ext recovery installed.
Does this negate my need to flash recovery in the downloader?
Since she is S-off, this should be pretty easy.
I will still need to access the bootloader via Windows cmd, yes? Or can I accomplish all of this using only the handset?
Sent from my PG86100 using xda premium
---------- Post added at 07:07 PM ---------- Previous post was at 06:52 PM ----------
Her hboot is:
SHOOTER XC SHIP S-OFF RL
HBOOT-1.40.0000
RADIO-0.97.10.0530
eMMC-boot
Jun 8 2011, 17:20:22
Is this a custom hboot, or stock? I ask because of the caution on the OP regarding custom bootloaders. And I am not sure because I changed her bootloader a week or so ago and had to change it back.
Sent from my PG86100 using xda premium
GAPO said:
Is this a custom hboot, or stock? I ask because of the caution on the OP regarding custom bootloaders. And I am not sure because I changed her bootloader a week or so ago and had to change it back.
Click to expand...
Click to collapse
That's a stock hboot so you should be fine. You can still update using the RUU if a custom hboot is installed, but it might take a restart to complete after the stock hboot is installed.
ramjet73
Hi I just updated my htc evo 4g 3d from Sprint to 2.95 via ota and after that i cannot use wifi at all it just says error. please Help!!!!
b0235g10d said:
Hi I just updated my htc evo 4g 3d from Sprint to 2.95 via ota and after that i cannot use wifi at all it just says error. please Help!!!!
Click to expand...
Click to collapse
You probably took the update and tried to install it with a custom recovery installed. If so, it appears that will result in a partially installed update with the ROM updated and the kernel not being flashed, which causes WiFi errors.
If that's your situation the best thing to do is flash a stock rooted ROM if that is what you were using prior to taking the OTA.
ramjet73
ramjet73 said:
You probably took the update and tried to install it with a custom recovery installed. If so, it appears that will result in a partially installed update with the ROM updated and the kernel not being flashed, which causes WiFi errors.
If that's your situation the best thing to do is flash a stock rooted ROM if that is what you were using prior to taking the OTA.
ramjet73
Click to expand...
Click to collapse
Can you please give me the official ics 2.89 rom or find it please?
b0235g10d said:
Can you please give me the official ics 2.89 rom or find it please?
Click to expand...
Click to collapse
You can find a rooted version in this post.
ramjet73
ramjet73 said:
You can find a rooted version in this post.
ramjet73
Click to expand...
Click to collapse
I found this thread because I'm in a similar situation. I tried downloading from the quoted link and using 4eXT recovery to load the zip file from sd card and it says "installation aborted".
Any ideas on what to try next? My eventual goal is to get back to 100% showroom stock non-rooted, locked booloader, so that the phone will accept OTA updates fully. Modding/ROMing is a drug I experimented with, and am now ready to go back to the straight and narrow. I'd prefer the phone not have any scars whatsoever from my old habits.
Additional background:
Started with ICS OTA. Used HTC unlock to unlock bootloader. Coworker installed rom toolbox, superSU and 4eXT recovery (not sure what order) to get SOS rom up and running. Never did go for S-OFF.
Decided I wanted to return to 100% Sprint factory stock. Coworker promptly moved across country, leaving me to figure this out. Tried using several ROMs from XDA and elsewhere, and eventually ended up with a rooted almost stock ROM, but had to flash my own radios via 4eXT, as wifi and 4G weren't working from the rom. Flashing my own radios via 4eXT, got to 2.89 with then current radios.
While sitting in my hotel travelling abroad with no international data plan and super slow hotel wifi, I foolishly downloaded OTA this morning, promptly killing my phone's wifi. Phone is still rooted with 4eXT, superSU, installed on it if that helps.
ramjet73 said:
You can find a rooted version in this post.
ramjet73
Click to expand...
Click to collapse
I just did this yesterday (Thanks to ramjet for pointing it out). Backup first. It dose a factory reset. You also need to install the blue tooth fix from this post after flashing the ROM http://forum.xda-developers.com/showpost.php?p=29707708&postcount=303
fixed thanks
Hi to all
I just fixed my phone thanks to Mr ramjet and I used the last one because I completely formatted my phone and only had 4ext it takes while to load the first time but be patient and it will work
How about S-Off phones?
Hello... so my fiance' has a Virgin Mobile Evo 3D. I downloaded the update from them and tried to install it through the custom recovery. It did what Ramjet said by updating the ROM and not the Kernel. I now have no wifi,it says wifi error when trying to turn it on. Since then, I have made sure the stock ROM was rooted, and have also HTCDev unlocked the device as well as S-Off with the Junobear wire trick and Linux. Now that I'm S-Off, is it ok to use an RUU to downgrade everything? Just wondering before I go any further and brick the device or screw up something I shouldn't. I figure it's better to ask questions first before doing it lol! Any help is greatly appreciated from anybody! I have my specs listed here for you all:
HTC Evo 3D 4G Virgin Mobile
Mods: Rooted,HTCDev Unlocked, S-Off
JuopunutBear
Shooter XC SHIP S-OFF RL
HBOOT: 1.57.5757
Radio: 1.09.00.0706
Android Version 4.0.3
Sense Version 3.6
Software number 2.95.652.5 710RD
Kernel Version: 3.0.16-g4211684
[email protected] #1
SMP PREEMPT
Baseband Version:1.09.00.0706
Build Number: 2.95.652.5 CL560640 release-keys
EDIT: Problem has been fixed and I will post a new thread on how to fix the problem soon.
PS4AndroidHacker said:
EDIT: Problem has been fixed and I will post a new thread on how to fix the problem soon.
Click to expand...
Click to collapse
Was this new thread ever made because I am a Virgin Mobile user too just like the above user and ever since last update my wireless has stated error.
If ur phone's bootloader is unlocked, relock your phone by using the fastboot command "fastboot oem lock". Then just download the 2.89 RUU.exe. (i know ur on 2.95 but i have not seen the 2.95 ruu floating around hgere yet) Run it on a windows PC and follow the prompts and it should flash correctly on your phone (caution, it will erase everything on your phone). Once its flashed, the phone will reboot (sometimes more than once) just let it do its thing
Once the phone has flashed correctly, do a software update and it will update to 2.95
Worked for me when i had to go back to stock in order to return it for warranty when the digitizer went out
EDIT:
Here is the link to the 2.95 OTA http://d-h.st/vUe
Download to your PC, then unzip it, and run it after you have relocked your phone
Should you need them, here is the list of HBOOTS (thanks to ramjet73) http://forum.xda-developers.com/showthread.php?p=29844945#post29844945
sixty9fordkiller said:
If ur phone's bootloader is unlocked, relock your phone by using the fastboot command "fastboot oem lock". Then just download the 2.89 RUU.exe. (i know ur on 2.95 but i have not seen the 2.95 ruu floating around hgere yet) Run it on a windows PC and follow the prompts and it should flash correctly on your phone (caution, it will erase everything on your phone). Once its flashed, the phone will reboot (sometimes more than once) just let it do its thing
Once the phone has flashed correctly, do a software update and it will update to 2.95
Worked for me when i had to go back to stock in order to return it for warranty when the digitizer went out
EDIT:
Here is the link to the 2.95 OTA http://d-h.st/vUe
Download to your PC, then unzip it, and run it after you have relocked your phone
Should you need them, here is the list of HBOOTS (thanks to ramjet73) http://forum.xda-developers.com/showthread.php?p=29844945#post29844945
Click to expand...
Click to collapse
This sounds hopeful, I did try to install this before with no luck, it gave me a 131 custom id error. I did it relocked and I am currently 2.95.652.5, and S-ON.
any suggestions?
Thanks