Related
THIS METHOD IS NOW OUTDATED.
For everyone that is starting from scratch with a wiped NookColor, I have made a linux script available that will do everything for you. This includes enabling apk installs on the device, live wallpapers, multitouch, etc. It will also download and install YouTube, Gmail, and the Market. It also changes the Market fingerprint to that of a Droid Eris on Verizon so you can see protected apps. It does not require use of the Android Emulator to generate an AndroidId as this is done automatically thanks to clockworx. All it does require is that you be nootered and have working Superuser.
Thread here:
http://forum.xda-developers.com/showthread.php?t=871210
DISCLAIMER:
These steps are what worked for me and some may not even be required. If this guide needs any clarification, post a reply and I will do my best to update it. I'm 99% certain all the steps are here.
If you have already tried to get the Market or other Gapps working, etc then it is very likely you will have to do a full factory reset before this will work for you. I have no idea why, but if these steps don't work I would try that first.
In my experience the factory reset is two steps:
8 failed boots restores the /system partition. You can easily trigger this reset without 8 failed boots by running this command from a Linux or Mac OSX command line:
echo -n -e "\008\000\000\000" > /tmp/foo; adb push /tmp/foo /rom/devconf/BootCnt; adb reboot
Click to expand...
Click to collapse
Afterwards:
Booting while holding power+volumeup+nook button restores /data
I had to do both of these steps in this order to get a full reset on the device.
Required:
nc_gapps.zip
system.img for AVD
Youtube for Eclaire
Optional:
Root Explorer really speeds this up. If you have it, I recommend using it as this tutorial is written with it in mind.
* Copy nc_gapps.zip onto the 4gb internal partition of the NC, /media/
* Unmount both the internal partition and the SD card (if applicable) from within your OS but leave the USB cable connected.
* Using a command prompt on your OS, navigate to android-sdk/tools (or platform-tools in newer SDK) and type the following:
adb shell
mount -o rw,remount -t ext2 /dev/block/mmcblk0p5 /system <-----This can be also done by going to /system/ in Root Explorer and clicking "Mount R/W" at the top
cd /media
miniunz -x nc_gapps.zip -d /system/ <-----Overwrite [A]ll if prompted!
echo "ro.config.nocheckin=no" >> /system/build.prop
exit
Click to expand...
Click to collapse
* Leave this command prompt open, we will need it in a minute!
* Install Youtube App. If you have a previous version installed it's best to use Titanium Backup to wipe it's data then uninstall.
* Run Youtube. Press Menu->My Channel. Log in with Gmail account. If you get the authentication error here you can try rebooting and wiping Youtube data again with Titanium Backup.
* Reboot NC
After reboot:
* Using the command prompt on your OS from before, type:
adb pull /data/system/packages.xml
Click to expand...
Click to collapse
*In this file find the string "uid.system". You should find a line that looks like:
<shared-user name="android.uid.system" userId="1000">
Remove the 3 lines beneath this one. They should look similar to:
<sigs count="n">
<cert index="n" />
</sigs>
n is an integer that may be different for everyone. After removing these lines, the line immediately after "<shared-user...>" should be "<perms>"
Save.
* Using the command prompt on your OS:
adb push packages.xml /data/system/
Click to expand...
Click to collapse
Reboot NC and disconnect USB.
Gmail should work but running the Market should load the TOS after which you will get a server error. This is caused by our device not having a valid androidId. Let's generate a valid androidId using the AVD emulator.
Create a new AVD for Android 2.1-API Level 7 using these settings:
SD Card Size: 100M
Skin: Built-in: Default (HVGA)
Hardware Properties:
Abstracted LCD Density: 160
Touch-screen support: yes
Device RAM size: 1024
Once the AVD is in your list, click on it and then click Details on the right hand side. Note the path and move the system.img you downloaded in that directory.
Start the AVD. When prompted, sign in with your existing Gmail credentials. Use CTRL+F11 to slide the keyboard in and out when prompted.
Run this command to get the androidId from the emulator:
adb shell sqlite3 /data/data/com.google.android.googleapps/databases/accounts.db "select * from meta";
Click to expand...
Click to collapse
It's the long number after androidId|, SAVE IT!
Now, connect your NC back to USB.
On the third command below, be sure to replace ANDROID_ID_FROM_EMULATOR with the number I just told you to save.
adb pull /data/data/com.google.android.googleapps/databases/gls.db
sqlite3 gls.db
update meta set intvalue='ANDROID_ID_FROM_EMULATOR' where name='androidId';
.q
adb push gls.db /data/data/com.google.android.googleapps/databases/
Click to expand...
Click to collapse
Reboot NC
Wow, that was quite a bit of work to figure out, to be sure.
Thanks, will give it a try!
Does this also provide the Google account setup capability (Reader, Listen, etc.)?
Thanks for the fix first of all!!!
I used root explorer and copied over all of the files recommended, then installed the youtube app you linked to, but when I tried to go to menu/my channel it flashes a message that there was a problem authenticating.
Any ideas?
Thanks!!!
Never mind...
Before doing the androidID stuff, Gmail is supposed to work? It doesn't. Just flashed for a sec and goes back to home screen
Also, there is no Market icon available. Am I supposed to install Vending.apk after putting it in /system/app?
EDIT: Youtube now doesn't work either...
EDIT2: Youtube works after an uninstall/reinstall, and I can sign in. Gmail still doesn't work and no market icon
bazzly said:
I'm confused....
"Using Root Explorer:
1) copy etc, framework, and lib folders into /system."
Those files are already in the /media/system directory....ohh...you talking the root /system not media/system....correct...?
Click to expand...
Click to collapse
Yes, that is correct.
bbtheory said:
Thanks for the fix first of all!!!
I used root explorer and copied over all of the files recommended, then installed the youtube app you linked to, but when I tried to go to menu/my channel it flashes a message that there was a problem authenticating.
Any ideas?
Thanks!!!
Click to expand...
Click to collapse
Try rebooting first. If that does not fix it then try clearing the data for the youtube app. If all else fails do a complete factory reset and start this from scratch. The youtube authentication issue was my biggest hurdle and I ended up doing a factory reset myself.
Xhorder said:
Before doing the androidID stuff, Gmail is supposed to work? It doesn't. Just flashed for a sec and goes back to home screen
Also, there is no Market icon available. Am I supposed to install Vending.apk after putting it in /system/app?
EDIT: Youtube now doesn't work either...
EDIT2: Youtube works after an uninstall/reinstall, and I can sign in. Gmail still doesn't work and no market icon
Click to expand...
Click to collapse
Same here...
Does the build.prop contain a valid version string which allows market access?
Also, there's a new version of the market going about too
Ok so I got past the youtube and now gmail works and the market gets the server error. However, I cant seem to get started with AVD to get the android ID... are there some more detailed instructions for an AVD noob???
bbtheory said:
Ok so I got past the youtube and now gmail works and the market gets the server error. However, I cant seem to get started with AVD to get the android ID... are there some more detailed instructions for an AVD noob???
Click to expand...
Click to collapse
Were there any variations from the steps above that you made to get gmail working? Not sure why mine is flashing then closing.
norkoastal said:
Were there any variations from the steps above that you made to get gmail working? Not sure why mine is flashing then closing.
Click to expand...
Click to collapse
No variations from the steps above other than fixing the permissions on the files that I copied over... They need to match the permissions of the other files in the respective folders.
Managed to get Gmail, Reader, and Market working. However, every download on the market fails. When I run a logcat i get "authentication failed"
I did replace androidId using the emulator.
Any ideas?
Nice! this works great! just tested out couple free apps from Market and both installed and worked fine. Thanks for figuring this out! finally I don't have to hunt for apk files
-----------
buy the way, AppBrain works fine with Market too.
From my pandigital days I have this question: does enabling google market and other apps prevent your nook color from staying in deep SLEEP?
Sent from my LogicPD Zoom2 using Tapatalk
I had an issue because I had not ever logged into youtube with my gmail account. I went to youtube.com and logged in, then was able to log in using the YouTube app.
Can someone plase post some AVD or emulator instructions??? That would be awesome!!!
For avd, you have to have the Android SDK installed. Then you can run (sdk folder)/tools/android to start the avd manager.
msid said:
For avd, you have to have the Android SDK installed. Then you can run (sdk folder)/tools/android to start the avd manager.
Click to expand...
Click to collapse
When I do that I get this message:
[INFO] Starting Android SDK and AVD Manager
'java' is not recognized as an internal or external command,
operable program or batch file.
bbtheory said:
When I do that I get this message:
[INFO] Starting Android SDK and AVD Manager
'java' is not recognized as an internal or external command,
operable program or batch file.
Click to expand...
Click to collapse
You need Java. (java.com)
Well this is a easy tool for editing /system/etc/hw_config.sh directly on your PC, and add things like multitouch, etc, without needed to edit on your phone (bored)
Attached some screenshots.
Requirements:
Windows OS (For vista & 7 please run as admin, for xp users, don't needed that), or Linux OS (only tested on Ubuntu, but tecnically should work on any linux OS)
Device Drivers
Java
On linux, chmod +x hw_editor.jar
You
Features:
Easy Editing Hw_config.sh
Automatic Backups
Easy Pull & Push, you just need to press a Button
Please be sure of connecting your device first to pc, and turn on USB debugging, otherwise the software will give you a lot of errors
.rar for linux, .zip for windows
Stop making awesome ****!
s0ftcorn said:
Stop making awesome ****!
Click to expand...
Click to collapse
Lol
Uploaded a new bug fixed version ( now it returns the RO state at end of pushing )
wooow great think nice working
only suggest could it be added for build.prop to?
it will be easier for newbies.
Great work buddy, thanks alot for your time making this
Eyama said:
wooow great think nice working
only suggest could it be added for build.prop to?
it will be easier for newbies.
Click to expand...
Click to collapse
I will see if i do it tomorrow
Kennnn said:
Great work buddy, thanks alot for your time making this
Click to expand...
Click to collapse
Im glad you like it
@ All : Uploaded new version, now sets chmod 755 for hw_config.sh, and uses a sh script to mount and unmount rw, seems to be better this way , also need testers from other devices
i have problems :/ i press pull and sucessfully pulled then i press edit and i got message java.io.FileNotFoundException: C:\temp.sh and then opens empty editor. backup map is empty. do i have to unzip to a particular place?
EDIT: i have it on desktop
Eyama said:
i have problems :/ i press pull and sucessfully pulled then i press edit and i got message java.io.FileNotFoundException: C:\temp.sh and then opens empty editor. backup map is empty. do i have to unzip to a particular place?
EDIT: i have it on desktop
Click to expand...
Click to collapse
Wait some time after pressing pull, and before pressing edit , also after you press pull please be sure if on C:\ are 2 files, one mountScript.sh and the another one temp.sh, please notify me
EDIT: Uploaded a new version with more sleep time (3sec after pressing pull)
no i dont get those files in C:\
Eyama said:
no i dont get those files in C:\
Click to expand...
Click to collapse
Did you press pull first right ?, so it's really weird, try with the new one, and be sure that your device it's connected with debugging mode on, try open adb, and write adb start-server
yes i did.i have debugging mode on and usb storage on.i tried the new one with sleep 3. just one think where do i need to unzip those files? in Android SDK/tools or i can have it on my desktop.
Eyama said:
yes i did.i have debugging mode on and usb storage on.i tried the new one with sleep 3. just one think where do i need to unzip those files? in Android SDK/tools or i can have it on my desktop.
Click to expand...
Click to collapse
You dont need to have USB storage on, but anyway i dont think that's the problem, it should work on any folder, for me works on any folder
EDIT: Wait what's your OS?
ok i tried with usb storage off, unzipet on desktop in xxxx folder. i start the Hw_Config Editor.jar press pull wait for message press ok. check in C:\ for those 2 files and they arent there. then press edit en same message for mising file. i dont know what is wrong maybe im too dumy for this hehe
Eyama said:
ok i tried with usb storage off, unzipet on desktop in xxxx folder. i start the Hw_Config Editor.jar press pull wait for message press ok. check in C:\ for those 2 files and they arent there. then press edit en same message for mising file. i dont know what is wrong maybe im too dumy for this hehe
Click to expand...
Click to collapse
Please say me what's your Operative System, if you're on windows vista or windows 7 you need to run as admin the .jar
yes im on win 7 im going to try with adimn run
Edit: i dont have an option for run as adnim this is strange :/
Eyama said:
yes im on win 7 im going to try with adimn run
Edit: i dont have an option for run as adnim this is strange :/
Click to expand...
Click to collapse
chumby_666 confirmed that works running as admin
EDIT: Download the last one and run .bat as admin , thanks to chumby for the bat
EDIT: Packed all in a .exe and run on background the .bat, also added a NICE icon
thanks to you both it is working now
o just for those who have antivirus protection turn it off before unpack zip an using the program.
D4rKn3sSyS, you really are making things easier for us.
BTW, downloaded this, got a virus warning message:
Trojan:Win32/Delfsnif.DX
Category: Trojan
Description: This program is dangerous and executes commands from an attacker.
Click to expand...
Click to collapse
I ignored it and allowed your awesome program to run. You might want to edit the first post to say that antivirus may give a false positive.
EDIT: For the extremely paranoid out there (D4rKn3sSyS is the man! Why doubt his program?), I ran the program through VirusTotal. RESULT: 5/ 42 (11.9%) returned "infected".
Works fine on mine, win 7 x64/x10 mini pro, using Avast free, no virus warning.
thx
Uploaded Linux version, tested on ubuntu, need testers on fedora and other linux OS
For linux, only will work on the root of your user Folder for ex: d4rk/files here
Notice:
Click to expand...
Click to collapse
Sorry guys this no longer works...
Ubuntu removed alot of the files needed to run it on a phone off of their website which is why you are getting the errors on the script to try and install it.
Recapped:
Here's what I mean the website the script is going to to get the files no longer exists...
Heres an example to see for yourself: http://ports.ubuntu.com/ubuntu-ports/pool/universe/t/tightvnc/tightvncserver_1.3.9-4_armel.deb
I will try and find a new link to plug in but for now it DOES NOT WORK!
Thank you for your patience on the thread,
StrumerJohn
==== How to Install Ubuntu Linux on your HTC EVO 3D / Sensation 4G ====
Table of Contents
Post 1
1: Disclaimer
2: Pre Requirements
3: PC Guide to push to phone
4: MAC Guide to push to phone
5: Additional Scripts
6: Credits
Post 2
1: FAQs
2: Recognitions
Post 3
1: News and Updates
2: Additional Notices
Click to expand...
Click to collapse
-Disclaimer-
This has been tested on my phone and runs perfectly fine, I am not responsible for you breaking, bricking, or dropping your phone on the floor and causing the USB cable to fall out and blow up your device.
Pre Requirements:
A rooted HTC EVO 3D or Sensation 4G
A S-off'd HTC EVO 3D or Sensation 4G
netarchy's kernel (Silverneedle Test5)
Android SDK
The USB drivers for your phone. (x32) (x64)
A microSD Card
2.3 GB Free of space on your microSD card
Know how to read to directions
Click to expand...
Click to collapse
The intense Procedure:
1. Download this version of Ubuntu. [Download #1] [Download #2]
2. Unzip the Ubuntu folder to your desktop and if you want, delete the compressed one you downloaded.
3. On your phone go to Settings > Applications > Development and turn on USB debugging.
4. Plug in your USB cable (from your computer to your phone) and mount your (mirco)SD card.
5. Move or copy over the unzipped / normal Ubuntu folder. This will take a long time unless you have a class10 microSD card.
6. After moving / copying that file over, tell your phone to unmount the (micro)SD card / Set the phone to Charge Only mode.
7. Now on your computer, go to where you have Android SDK installed. (Example on my computer: E:\Program Files (X86)\Android\android-sdk )
8. When in the main SDK folder, hold shift and right click a blank area and then click on "open command window here". It should of opened the command line window with the directory of your SDK already put in. If not type cd "C:\Your directory or location of your SDK"
9. Now type "cd platform-tools"
9.5. (Optional) "type adb devices" and check if the computer recognizes your phone. If not you need to reinstall your drivers from the download link above in the requirements.
10. Type "adb shell"
11. Type "su" so we have superuser permissions
12. Type "cd /sdcard" so the directory is changed to the (micro)SD card
13. Type "cd ubuntu" so the directory is changed to the Ubuntu File
14. Type "sh ubuntu.sh" so we can install Ubuntu
15. Type "bootubuntu" to start up Ubuntu. Next time you enter Ubuntu, you just need to type "bootubuntu" from your /sdcard/ubuntu directory, there is no need to run ubuntu.sh again.
16. If you got "[email protected]" in the command line, you have sucessfully installed Ubuntu. If not make sure you installed netarchy's kernel. If it still does not install correctly please try a different ROM, I have only tested this on SteelROM 1.1. *AFTER INSTALLING ANY ROM, YOU NEED TO REINTALL THE KERNEL.*
17. Now type "apt-get update" to update Ubuntu to the latest version. Then "apt-get upgrade" to apply the update.
18. Type "apt-get install tightvncserver" to install the vncserver. (Your telling your phone to read off it self pretty much.)
19. Type "export USER=root" To make yourself a user / the user
20. Type "vncserver -geometry 1024×800" to set the screen resolution you want to display on your phone. Remember you can always zoom in by pinching, so you don't need to make this that much smaller. You should also get prompted to set a password, do so. You will need to remember this password to log in.
21. Download the AndroidVNC Viewer off the Market here.
22. Open the viewer, and put in a nickname, your PASSWORD FROM ABOVE, and for the IP Address put: 127.0.0.1 for the port put 5901. THEN SCROLL DOWN and make the COLOR FORMAT 24-bit colors (4bpp).
And finally, hit Connect to launch Ubuntu on your phone!
For Mac users:
Finder -> Applications -> Utilities (folder) -> Terminal
When you cd to where your adb is located, cd is lowercase as are most all unix commands.
If you're unsure where to go, get to adb in your Finder, right-click, get info, the pop-up will show you the path. Note in unix that the folders (subdirectories) are separated by / and not by \ like in Windows.
Once you're there, the only trick you need to know is to tell unix that adb is located where you are, so you change the adb shell command like this:
./adb shell
That's about it, all other instructions once you're inside the phone shell are the same.
OBTW - after the unzip of the initial file from the OP, just drag and drop the whole ubuntu folder to your NO NAME drive (normal sd card formatting doesn't get a name at the factory, so by now you know that your sd card mounts like that anyways I'd suppose - just put it here in case).
Click to expand...
Click to collapse
Additional Scripts
Danaff37's
danaff37 said:
That's the script catted out.
I posted a different script a few pages back that I think will help you guys. I modified it so we should have no trouble with apps in sd.. I finally got a bigger sdcard so I can test this stuff and this script works great. Please guys try this script. If you download it in phone it will change the name and add a bin on it I think, so rename it accordingly and make sure it gets into /system/bin with the right permissions (755 or rwxr-xr-x), then run it
http://db.tt/gin57Gd
Sent from my PG86100 using XDA App
Click to expand...
Click to collapse
Credits:
Ubuntu Modded and Guide by: Me
Mac Guide Written by: EarlyMon
danaff37's Script by : danaff37 (of course)
Original dev of Ubuntu: Zedomax
If you have any problems beside the slow downloads because of the blown up servers, let me know below. Also I tried to type this fast, so if there is any typo's or broken links let me know too! Thanks!
Also feel free to hit the Thanks button or Donate for more Guides
FAQS
FAQS
Do I need to have everything in the android-sdk downloaded and installed?
No, you just need to have the base sdk.
When I tell the command prompt to adb devices, my phone does not show up!!
Make sure you have installed the proper drivers for your phone and for your correct operating system
I'm not getting "[email protected]" when I type / copy-&-paste "bootubuntu"
Well, this could be for a various amount of reasons, first make sure you have a rooted HTC EVO 3D/Sensation. And by root, I mean a full root, not just a temp root or S-off. If you still do not get "[email protected]", flash your device (or go though your data folder and delete all the ubuntu files, then delete the ubuntu file off of your sd card and clear your caches.), and retry the above steps. If the problem still persists, then please PM me with your exact problem.
I'm having issues within the VNC, and I get an error message when I hit "connect".
Make sure you typed your password correctly, the passwords are case sensitive. If you still cannot get in, make sure your IP Adress is set to "127.0.0.1" and your Port(s) are "5901".
The colors on my screen look all weird and disorientated, how do I fix this?
Close Ubuntu, and re-open the VNC application, then scroll down to "Color Format" and tap on "24-bit color (4 bpp)".
The on-screen keyboard does not work and I get a different letter or character for whatever character I type!
The on-screen keyboard will work now, if you install LXDE.
I'm not good with reading text! I need a video demonstration!
For a video head here: http://www.youtube.com/watch?v=YbunTRzEQCI
How do I close Ubuntu?
Two options here:
1.Logout of the server and go to your homescreen and push menu, then go to settings, then Applications, then Running Services and close any remaining open part of the server program. The service may re-open later, do not close it though. It won't use up a noticable amount of RAM, just enough to make sure the application opens quick again.
2. Logout of the server and use your favorite task killer to close the server process. The service may re-open later, do not close it though. It won't use up a noticable amount of RAM, just enough to make sure the application opens quick again.
FAQS should be in order chronologically (until the end of them).
I would like to give a huge thanks to EarlyMon, for helping out lost members. This thread would not be as peaceful if it were not for him.
And it seems I have forgotten to list another VERY helpful person here, danaff37. I am really grateful to both of these two for all of the help and work they have done to aid others.
Am I missing a question that you are pretty sure is asked ALOT (lol)? Then PM me please and I'll get it up here ASAP!
Upcoming Change log for final release:
(StrumerJohn's Zedomax Ubuntu Mod)
Made a launchable .exe for easier updating and installing of Ubuntu
Default mode LXDE for fixed keyboard
Pushes Server application to your phone
Fixed a few problems that caused people to have an error in installing
Server application updated
Fixed port issues for log in errors
News update 11/13/11
Bad news and Good News:
Ubuntu was successfully updated
Update brakes keyboard
Update breaks Apps2SD
Update takes up less space (1GB instead of 2GB)
Update ONLY works on MIUI so far
Updated script to add work around for those facing issues
Computer .exe only working on x64 Windows 7 computers ;-;
Thank you for those of you testing! Might make this open Beta...!
Version as of 12/12/11
Alpha Build 1.0
What Doesn't Work so far:
Boots to latest version only to lock up phone (Unless you are running MIUI)
Keyboard borked
Doesn't work on ICS
Audio Broken
Apps Saved on SD
What works:
Everything else
Sweeeeet.
Appreciate my help? Thank me
Wow this is amazing! Never used linux before tho...
Haven't looked at the bootubuntu script yet, but I know a lot of these couldn't work if you had any apps on sdcard at all. Each app moved to sd takes a loop device.
Sent from my PG86100 using XDA App
maazing will try tonight!!!!!!
danaff37 said:
Haven't looked at the bootubuntu script yet, but I know a lot of these couldn't work if you had any apps on sdcard at all. Each app moved to sd takes a loop device.
Click to expand...
Click to collapse
Just moved partially like moving to the SD or Actually having them Downloaded and Installed to the SD?
Interesting. Nice write up
Sent from my PG86100 using XDA Premium App
Cool...
But, why.
Cause you can?
Sent from my 3vo via Tapatalk
Because Ubuntu has some computer applications you can't normally use on your phone. In the browser download Java and check out runescape runs like shizzle but once we get new quad phones out I'm sure it would run fine. lol
This is what I wanted. Million thanks....
Sent from my PG86100 using www.psvitahacks.co app
Added to my 'Complete LIST' thread: http://forum.xda-developers.com/showthread.php?p=16132451
StrumerJohn said:
Just moved partially like moving to the SD or Actually having them Downloaded and Installed to the SD?
Click to expand...
Click to collapse
Using the stock apps to sd like under manage applications (like the same as is available on a non rooted phone). The script for ch rooting can be made to work around it though. But most aren't.
Sent from my PG86100 using XDA App
danaff37 said:
Using the stock apps to sd like under manage applications (like the same as is available on a non rooted phone). The script for ch rooting can be made to work around it though. But most aren't.
Sent from my PG86100 using XDA App
Click to expand...
Click to collapse
If there are any small minor problems like that and it's not working proper, let me know. I'll mess around with some things and release a patch.
Installed successfully and works great except I can't type cause of the keyboard glitch. Anyway around it?
Sent from my PG86100 using XDA Premium App
Working with shooter rewind
akiradavis said:
Installed successfully and works great except I can't type cause of the keyboard glitch. Anyway around it?
Sent from my PG86100 using XDA Premium App
Click to expand...
Click to collapse
The only way to get around it atm (at the moment) is to use a bluetooth keyboard.
Very sweet! I will test this tomorrow when I get home. It should work on my ROM as well
Nice....can't wait for the keyboard fix.
hi guys, i'm new in this forum, and i'm new to android too, i just bought a htc desire x and want it to be root, but i have problem when trying to get token id in hasoon2000 HTC Desire X All-In-One Toolkit V2.0 [1-1-2013], it says C:\ Document is not recognized as an internal or external command openable program or batch file.
usb debugging is already connected, please any one kindly fixing my problem, thx
sorry for my bad english. btw i'm from indonesia
Did you follow these steps?
How To Use. THIS IS FOR THE PC ONLY. No plans ever for Mac or Linux. Sorry.
1. Download the toolkit DO NOT RENAME THE FOLDER
2. Download Winrar from here. Install it after you download it
3. Extract the folder anywhere.
4. Run the program.
thx for replying so quick, after i downloaded then i extract to desktop and just run the program by clicking the symbol written as desire, am i doing it right?
Try to unpack it somewhere else on a root of some partition of your PC, try to unpack it to non system partition.
ok thx, i'll try it tomorrow, i'm sorry i've to go home coz it's 11.41pm already in my town, and i'm still on friend's house.
thx anyway for your reply, i'll let you know the progress
hi nlooooo, i did what u told me to do and it worked, i unpacked to (Cdrive, but another problem came on my device when i clicked get token id.
here is the picture shows the problem
@nlooooo.....i just tried your way on rooting this device, and same problem came up on step 8 when getting token id, still it says C:\ Document is not recognized as an internal or external command openable program or batch file, i've found out my device still locked, is it because of the device still lock? here's the image shown
problem solved
hi nlooooo......i've rooted my device, just try to put all the downloaded file to C:drive, and followed your tutorial on your thread, and i succeeded, at least i saw superuser on my device, thx alot for your tutorial.
No problem, that's why we're here. If you see it then it should be it. Try to install some app that requires root privileges (Titanium Backup for ex) and see if it can get SU rights.
hi.....any recommendation of apps or what to do after this rooting? cos i really a noob in android and root things. thx
uso_diario said:
hi.....any recommendation of apps or what to do after this rooting? cos i really a noob in android and root things. thx
Click to expand...
Click to collapse
Yeah install AdFree, and get rid of the ads
ayyu3m said:
Yeah install AdFree, and get rid of the ads
Click to expand...
Click to collapse
Well, it works for me with wifi but not with mobile data, it's configured over APN IP.
nlooooo.....sorry to bother you again, but i think my dx still not rooted, cos when i installed titanium backup root it comes like this, what do i hv to do?
ayyu3m said:
Yeah install AdFree, and get rid of the ads
Click to expand...
Click to collapse
heyyy........thank you
uso_diario said:
nlooooo.....sorry to bother you again, but i think my dx still not rooted, cos when i installed titanium backup root it comes like this, what do i hv to do?
Click to expand...
Click to collapse
Go and open Superuser app, swipe to first screen and see if the binary is installed. Then go and clear data for Titanium and open it again.
If you still have the problem use some root explorer to check folder system/bin if there is a file named su.
nlooooo said:
Go and open Superuser app, swipe to first screen and see if the binary is installed. Then go and clear data for Titanium and open it again.
If you still have the problem use some root explorer to check folder system/bin if there is a file named su.[/QUOTyes..there is binary installed, but it says outdated binary notification ticked
Click to expand...
Click to collapse
That's ok it should be like that. For me Titanium is working fine I have no problems.
nlooooo said:
That's ok it should be like that. For me Titanium is working fine I have no problems.
Click to expand...
Click to collapse
hi nlooooo........finally i got it fixed by start it all over again today........i'm new in this forum, don't know whether i can click your thanks button or not, but i will try it anyway, thx a lot
ps: i think it clicked
uso_diario said:
hi nlooooo, i did what u told me to do and it worked, i unpacked to (Cdrive, but another problem came on my device when i clicked get token id.
here is the picture shows the problem
Click to expand...
Click to collapse
I've got the same screen too, nothing is happening. What did you do to make it work?
i am getting stuck at last step i am always getting this message sending 'unlocktoken' (0kb) .
i have not installed htc sync app but just directly installed the drivers for unlocking purpose.
the boot loader is recognizing the usb connection as Fastboot usb.
using windows 7 32 bit operating system.
tried putting the unlock_code in c drive and desktop but it doesnt work.
the file is just a 1kb file.
the default view is shown as a vlc player file.
any help will much appreciated. this is my 1st htc mobile and am not used to this kind of rooting. previously owned a samsung so was using odin a lot.
https://i.imgur.com/qfuKKFQ.jpg <- Here's what I get.
I downloaded release_Remix_OS_for_PC_64_B2016020201_Alpha_EFI.zip from the Official Website. Opened the tool inside, and copied the files into my USB 3.0 flash drive using it. Write speeds are higher than 20MB/s. I have a UEFI BIOS. I get the same thing on both Resilient mode and Guest mode. I selected Resilient mode on first launch and the system went through the first launch steps.
When you get to the boot choice of RemixOS remove 'quiet' from the line when TAB and then 'e' for editing it, to show what's going on @ boot time.
most time we solve this by deleting recreating data.img
I hope that helps you
ecksdeeay said:
When you get to the boot choice of RemixOS remove 'quiet' from the line when TAB and then 'e' for editing it, to show what's going on @ boot time.
Click to expand...
Click to collapse
I did that. But this is all I could take a picture of. http://i.imgur.com/7rseNNe.jpg I have no clue what any of it means.
I opened it in guest mode.
imadlatch said:
most time we solve this by deleting recreating data.img
I hope that helps you
Click to expand...
Click to collapse
I dont know how to do that. I cant seem to be able to open the ISO that was in the zip file I downloaded. However, I formatted my flashdrive and used the included tool to reinstall Remix OS. It didnt help.
on the edit line you removed 'quiet' from, put 'DEBUG=1' or just put the '1' on the DEBUG= if it's showing ? I forget if it is but it will go through like before but this time will stop twice where you have to type 'exit' for it to proceed (twice-I repeat!) maybe that'll help? or @imadlatch is more than likely correct?
ecksdeeay said:
on the edit line you removed 'quiet' from, put 'DEBUG=1' or just put the '1' on the DEBUG= if it's showing ? I forget if it is but it will go through like before but this time will stop twice where you have to type 'exit' for it to proceed (twice-I repeat!) maybe that'll help? or @imadlatch is more than likely correct?
Click to expand...
Click to collapse
Here's what I got doing that. http://imgur.com/a/SL1rQ
I never got the second exit prompt. I just got the errors in this https://i.imgur.com/sGo2EQ5.jpg image over and over.
SELinux error. When installing on hardrive the selinux command is passed to the boot line (I'm only guessing here but if you could maybe add this) 'androidboot.selinux=permissive' worth a try?...what are you using as your machine? send feedback from here http://goo.gl/kt1bwC using the Google form https://goo.gl/pcRswT
ecksdeeay said:
SELinux error. When installing on hardrive the selinux command is passed to the boot line (I'm only guessing here but if you could maybe add this) 'androidboot.selinux=permissive' worth a try?...what are you using as your machine? send feedback from here http://goo.gl/kt1bwC using the Google form https://goo.gl/pcRswT
Click to expand...
Click to collapse
androidboot.selinux=permissive is present there by default. Im using a lenovo ideapad y510P with core i7 4700MQ, 8 Gigs of RAM and dual Nvidia GT 755M.
incognitonk said:
Nvidia GT 755M.
Click to expand...
Click to collapse
Nvidia is the problem then. ...
ecksdeeay said:
Nvidia is the problem then. ...
Click to expand...
Click to collapse
Really? Oh well, guess Im gonna be playing the waiting game then.
Thanks for everything up until now.
Search as I think there are work arounds @incognitonk
incognitonk said:
https://i.imgur.com/qfuKKFQ.jpg <- Here's what I get.
I downloaded release_Remix_OS_for_PC_64_B2016020201_Alpha_EFI.zip from the Official Website. Opened the tool inside, and copied the files into my USB 3.0 flash drive using it. Write speeds are higher than 20MB/s. I have a UEFI BIOS. I get the same thing on both Resilient mode and Guest mode. I selected Resilient mode on first launch and the system went through the first launch steps.
Click to expand...
Click to collapse
Its look like its because of your nvdia GPU isssue , don't worry we have solution for this
Select resident mode , don't press enter , press tab you will get into edit mode.
At the end after space write this line - " nomodeset vga = 0x34C "
Without the quote .
Press enter , enjoy remix ☺☺
Hit thanks if it help
mdezazrock said:
Its look like its because of your nvdia GPU isssue , don't worry we have solution for this
Select resident mode , don't press enter , press tab you will get into edit mode.
At the end after space write this line - " nomodeset vga = 0x34C "
Without the quote .
Press enter , enjoy remix ☺☺
Click to expand...
Click to collapse
Thank you, It definitely did help. However the resolution is all wonky now. I have a 1080p screen. The images are all grainy and stretched out. Also, i can see the linux prompt blinking in the background. Anything I type on the keyboard will be entered there. Hence, if i type "reboot" and hit enter, the system will reboot.
I also tried the workarounds in this reddit post: https://www.reddit.com/r/RemixOS/comments/42wylw/any_way_to_run_with_nvidia_gpu/czenutg
But none of them helped either. I get the same issues; the poor resolution and the blinking prompt.
incognitonk said:
Thank you, It definitely did help. However the resolution is all wonky now. I have a 1080p screen. The images are all grainy and stretched out. Also, i can see the linux prompt blinking in the background. Anything I type on the keyboard will be entered there. Hence, if i type "reboot" and hit enter, the system will reboot.
I also tried the workarounds in this reddit post: https://www.reddit.com/r/RemixOS/comments/42wylw/any_way_to_run_with_nvidia_gpu/czenutg
But none of them helped either. I get the same issues; the poor resolution and the blinking prompt.
Click to expand...
Click to collapse
I don't know the blinking error solution , my friend also have that same problem , but there is a easy solution for resolution -
Root remix os , open any rooted browser , go to system folder , then open build.prop , edit the file , just add a line at the end
"ro.sf.lcd_density=150"
Write that line without quote , save build.prop , and change the number between 140 to 210 , see which one looks better on your monitor , have fun exploring remix ☺