Is the INTL kernel on Mevordel's dev thread (http://forum.xda-developers.com/showthread.php?t=2077671) up-to-date ?
Browsing the forum, it seems that it was created on 05/01 and I was wondering if the kernel in the 08/01 release changed since 05/01 -- and if it is the case, whether the INTL kernel was updated as well.
Thanks for any info
sylvain.joyeux said:
Is the INTL kernel on Mevordel's dev thread (http://forum.xda-developers.com/showthread.php?t=2077671) up-to-date ?
Browsing the forum, it seems that it was created on 05/01 and I was wondering if the kernel in the 08/01 release changed since 05/01 -- and if it is the case, whether the INTL kernel was updated as well.
Thanks for any info
Click to expand...
Click to collapse
Yes, it's up to date - you can tell after you have installed it by looking in system settings->Performance->processor->maximum cpu frequency.
if the largest value is 1320, then you have the latest version, if it is 1590 (or something like that) then it is the old version.
If someone want "old" version with 1.5 ghz i can upload ..i use that.
Sent from my YP-G70 using xda app-developers app
DZonikg said:
If someone want "old" version with 1.5 ghz i can upload ..i use that.
Click to expand...
Click to collapse
I would like that if its not problem to you...
Sent from my YP-G70 using xda app-developers app
QuanticZero97 said:
I would like that if its not problem to you...
Sent from my YP-G70 using xda app-developers app
Click to expand...
Click to collapse
http://www13.zippyshare.com/v/55677741/file.html
Also download voltage control and set 200mhz to 975mv and 1096 mhz to 1250 mv ,governor ondemand and set it to boot always with that.
Sent from my Nexus 7 using xda app-developers app
DZonikg said:
http://www13.zippyshare.com/v/55677741/file.html
Also download voltage control and set 200mhz to 975mv and 1096 mhz to 1250 mv ,governor ondemand and set it to boot always with that.
Sent from my Nexus 7 using xda app-developers app
Click to expand...
Click to collapse
Hvala
Sent from my YP-G70 using xda app-developers app
Related
Is it possible to undervolton saurom or n e rom
Sent from my SAMSUNG-SGH-I717 using XDA
I believe u can use voltage control app to clock not sure completely
Sent from my SAMSUNG-SGH-I997 using XDA
nman123 said:
Is it possible to underclock on saurom or n e rom
Sent from my SAMSUNG-SGH-I717 using XDA
Click to expand...
Click to collapse
yes you can . use set cpu app . you can either buy it from play store or google it out .....!!! best of luck .
How about ubdervolting
Sent from my SAMSUNG-SGH-I717 using XDA
nman123 said:
How about ubdervolting
Sent from my SAMSUNG-SGH-I717 using XDA
Click to expand...
Click to collapse
you can use system tuner :
https://play.google.com/store/apps/details?id=ccc71.pmw
pro:
https://play.google.com/store/apps/details?id=ccc71.pmw.pro
Is undervolting is opposite of overclock?
For ex i OC from 1.5 to 1.8ghz and under volt means downgrade from 1.5 to 1.2ghz??????
Sent from my AT&T Galaxy Note™ - please forgive if typos
sweetboy02125 said:
Is undervolting is opposite of overclock?
For ex i OC from 1.5 to 1.8ghz and under volt means downgrade from 1.5 to 1.2ghz??????
Sent from my AT&T Galaxy Note™ - please forgive if typos
Click to expand...
Click to collapse
No. Undervolt changes the voltage sent to the processor. Overclock changes the speed of the processor.
Sent from my SAMSUNG-SGH-I717 using XDA
I have sgp 5.0 with chip 1.5v rom and rj14 kernel and Im trying to do oc to 1.3ghz but my device get froze and restart.i used to had erygit 3.5 rom with rj14 kernel and I could do oc to 1.3ghz but now I can't...I tried to flash again the kernel and tglhe rom but I still get the same problem.
Any ideas how to fix it?
Sent from my YP-G70 using xda premium
Make sure that you increase voltage too.
send from my samsung galaxy wifi 5.0
kfirbep said:
I have sgp 5.0 with chip 1.5v rom and rj14 kernel and Im trying to do oc to 1.3ghz but my device get froze and restart.i used to had erygit 3.5 rom with rj14 kernel and I could do oc to 1.3ghz but now I can't...I tried to flash again the kernel and tglhe rom but I still get the same problem.
Any ideas how to fix it?
Sent from my YP-G70 using xda premium
Click to expand...
Click to collapse
I use 1.3 ghz on chip rom all the time so its not about the rom.
Sent from my GT-I9000 using XDA
DZonikg said:
I use 1.3 ghz on chip rom all the time so its not about the rom.
Sent from my GT-I9000 using XDA
Click to expand...
Click to collapse
so what is the problem?
kfirbep said:
so what is the problem?
Click to expand...
Click to collapse
could be hw problem that processor dont get enough voltage..did you try changing voltage to higher.
Sent from my YP-G70 using xda app-developers app
DZonikg said:
could be hw problem that processor dont get enough voltage..did you try changing voltage to higher.
Sent from my YP-G70 using xda app-developers app
Click to expand...
Click to collapse
No...Im noob.I always just put on 1.3 ghz and that's it..
Sent from my YP-G70 using xda premium
kfirbep said:
No...Im noob.I always just put on 1.3 ghz and that's it..
Sent from my YP-G70 using xda premium
Click to expand...
Click to collapse
So try it...
woer said:
So try it...
Click to expand...
Click to collapse
I don't know what to do..I don't know how to play with that thing...
Sent from my YP-G70 using Tapatalk 2
Just google it, increase voltage.
Wysyłane z mojego gt-i9000 za pomocą Tapatalk 2
Hi everyone, can i ask on how to remove the cyanogenMOD version?
Sent from my GT-I9300 using xda app-developers app
Why?
Sent from my GT-I9300 using xda premium
Is that OK running 2 ROMs? I think it will drain my battery fast , or how to uninstall paranoid android? I just want to use 1 ROM.
Sent from my GT-I9300 using xda app-developers app
You are only using one ROM. Its showing what version of CM the ROM is based on and then which version the PA is based on. It is imposibile to run two ROMs booted simultaneously.
Sent from my GT-I9300 using xda premium
Oh thanks dude, I'm totally noob here and seems like we have the same phone , I can't analyze the frequency and MHZ of my GPU and CPu, my battery is hot, can I try your settings?
Sent from my GT-I9300 using xda app-developers app
vincent_bLink11 said:
Oh thanks dude, I'm totally noob here and seems like we have the same phone , I can't analyze the frequency and MHZ of my GPU and CPu, my battery is hot, can I try your settings?
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
You need to use Siyah kernel v 1.68 and above to have a dual boot which you need to go to Stweaks/DualBoot. under CWM choose dual boot(at th e bottom).NOT SURE please ask
Hello everyone. So basically i have a question. Is anyone facing lags on cm 10.1 new nightlies? O have a lot of time with this rom, and i must say that 10.0 was much more smoother (at least for me)
On 10.1 even the homepage is choppy... I'm running Pegasusq overclocked 1.7 GHz with deadline scheduler... any advice you would give me?
Best regards
Sent from my GT-I9300 using xda premium
DarkSofter said:
Hello everyone. So basically i have a question. Is anyone facing lags on cm 10.1 new nightlies? O have a lot of time with this rom, and i must say that 10.0 was much more smoother (at least for me)
On 10.1 even the homepage is choppy... I'm running Pegasusq overclocked 1.7 GHz with deadline scheduler... any advice you would give me?
Best regards
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
I felt the latest PA ROM was quite laggy too...
Use Siyah kernel and I have a few tips for settings:
--Over clock to 1.5GHz
--use lulzactiveq
--turn gentle fair sleepers off
--set touch boost to 1000Mhz (or more if you want)
--turn android logger off
I also undervolt all frequencies by 75mv.... I do a lot of PC tweaking and you'd be surprised how much that little amount can reduce cpu temps.
Hope it helps. Did for me.
Sent from my GT-I9300 using xda app-developers app
kickassdave said:
I felt the latest PA ROM was quite laggy too...
Use Siyah kernel and I have a few tips for settings:
--Over clock to 1.5GHz
--use lulzactiveq
--turn gentle fair sleepers off
--set touch boost to 1000Mhz (or more if you want)
--turn android logger off
I also undervolt all frequencies by 75mv.... I do a lot of PC tweaking and you'd be surprised how much that little amount can reduce cpu temps.
Hope it helps. Did for me.
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
May i ask how's your battery life with this tweaks?
Sent from my GT-I9300 using xda premium
DarkSofter said:
May i ask how's your battery life with this tweaks?
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
It isn't really noticeably different to stock settings tbh.. (I.e. still not a patch on Samsung). Give it a go and see how you get on. It definitely makes the ROM smoother.
Sent from my GT-I9300 using xda app-developers app
kickassdave said:
It isn't really noticeably different to stock settings tbh.. (I.e. still not a patch on Samsung). Give it a go and see how you get on. It definitely makes the ROM smoother.
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
That means better than a normal cm 10.1 (sigh)
I did the things you told me, except the undervolting, and gotta admit it's better... Thank you very much
Sent from my GT-I9300 using xda premium
the undervolting will help with the battery life
Glebun said:
the undervolting will help with the battery life
Click to expand...
Click to collapse
Yes i know but it's not very noticable, and I'm not a big fan of it, last time i did it -50 i got my phone restarting frequently
Sent from my GT-I9300 using xda premium
DarkSofter said:
Yes i know but it's not very noticable, and I'm not a big fan of it, last time i did it -50 i got my phone restarting frequently
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
Check out here for more settings
http://forum.xda-developers.com/showthread.php?t=2071967
Sent from my GT-I9300 using Tapatalk 2
Try use "Seeder" app
xanthrax said:
Check out here for more settings
http://forum.xda-developers.com/showthread.php?t=2071967
Sent from my GT-I9300 using Tapatalk 2
Click to expand...
Click to collapse
Thank you ill look into it
MrxSiN said:
Try use "Seeder" app
Click to expand...
Click to collapse
Is it worth?
Sent from my GT-I9300 using xda premium
MrxSiN said:
Try use "Seeder" app
Click to expand...
Click to collapse
I have read comments from several devs that claim that this makes no difference and that those saying it does are experiencing the placebo effect
Addition: in case you are experiencing scrolling lag in any apps, make sure you have force GPU rendering ticked in developer options!! Absolute necessity in any JellyBean ROM.
Sent from my GT-I9300 using xda app-developers app
Firstly, sorry for posting here coz this is the only section for G version...
Is there any custom kernel for CM9 or CM9.1?
On stock cm9 kernel the lowest cpu is 300mhz, do we have more lower then that?
And a kernel for more battery saving?
Almost all thread here now about JB
Sent from my GT-I9100G using xda app-developers app
https://www.dropbox.com/s/453hh5g187noxqe/horsepower-3.0.0-ics.zip
This is horsepower kernel, I believe it supports under clocking to 150mhz
Sent from my GT-I9100G using Tapatalk 4
This is version 3.0 right? What do u think of kernel-cm9-twrp ? But i like cwm...
Sent from my GT-I9100G using xda app-developers app
What is actually stock ics cpu freq for i9100G? Previously i use non G it have lowest 200mhz
Sent from my GT-I9100G using xda app-developers app