please guys I need help, I would like to downgrade my atrix but I can not find it anywhere firmware 4.5.91
that allows me to do the unlock and install clockworrk.Or a way to make the second version unlok
there is nothing
Official 2.3.4 can be obtained via sbf file, but be careful, you may brick your device. I've never tried flashing the 2.3.4 sbf, but I have with the 2.3.6 sbf. Unofficial 2.3.4 can be obtained via fruitcake. then flash pudding sbf to get unlocked.
https://sites.google.com/site/motosbf/atrix-sbf-files
I'm not sure if it would work, but what about flashing the fruitcake 2.3.4 (i think thats the verion that matches up to 4.5.91, don't remember, its been a while), and then flashing the corresponding sbf file from the link above? I know that it just worked this evening for me when downgrading from 4.0.4 to stock 2.3.6.
I had a CWM backup of 2.3.6 saved. I restored to 2.3.6 via CWM, made sure everything was still good (obviously it was). That solved the downgrade. From there, I used RSD 5.7 to flash the 2.3.6 sbf, which "locked" the bootloader. Started it back up and here I am, downgraded from 4.0.4 to stock 2.3.6. I haven't gotten into recovery yet, but I suspect its the stock recovery. The only way to get CWM back is to flash the pudding sbf, and then flash a CWM recovery.img
Edit: Recovery does revert back to stock recovery.
palmbeach05 said:
I'm not sure if it would work, but what about flashing the fruitcake 2.3.4 (i think thats the verion that matches up to 4.5.91, don't remember, its been a while), and then flashing the corresponding sbf file from the link above? I know that it just worked this evening for me when downgrading from 4.0.4 to stock 2.3.6.
I had a CWM backup of 2.3.6 saved. I restored to 2.3.6 via CWM, made sure everything was still good (obviously it was). That solved the downgrade. From there, I used RSD 5.7 to flash the 2.3.6 sbf, which "locked" the bootloader. Started it back up and here I am, downgraded from 4.0.4 to stock 2.3.6. I haven't gotten into recovery yet, but I suspect its the stock recovery. The only way to get CWM back is to flash the pudding sbf, and then flash a CWM recovery.img
Edit: Recovery does revert back to stock recovery.
Click to expand...
Click to collapse
i am in italy and suppose that in my phone is present an european version ,in the site there is an at&t version,you have an site where i dovnloat an european version.
whit the version that i have download after the fase of mountind firmware the program tell FAIL
In that case you're going to need the fruitcake rom that matches your network.
Sent from my MB860 using xda app-developers app
Related
Hi, I have a root problem. I rooted the original firmware (1.2.6) using SuperOneClick and am now on firmware 1.8.3. I'm not sure if I still have root, but I'm doing a warranty exchange with AT&T (faulty ear piece) and even though I updated to 1.8.3, the Superuser icon remains there. I definitely need it removed because rooting voids the warranty, and if the warranty is void with the device I send in, it will cost $500.
I've read some people suggest a SBF Flash, but will AT&T be able to tell the firmware isn't the actual stock firmware? Or, if I was to restore to 1.2.6 via SBF Flash, will I then be able to update the firmware through the Android OS to the official AT&T 1.8.3 version?
Another suggestion I saw was the option to Gladroot it then remove root, but since I'm already on 1.8.3, I'd have to SBF Flash back to 1.2.6 to root it, anyways.
So, really the question is, will the SBF Flash remove the Superuser icon? And will AT&T be able to tell if the phone has been SBF flashed?
Thanks so much, and if you've found another way to remove the Superuser icon, please let me know!
If you sbf flash it to 1.2.6 was like how you bought it. So superuser would be gone and it wont be rooted. Also At&t wont be able to tell.
Sent from my Motorola Olympus running gingerblur 3.5 on 1.8.3 using XDA App
I rooted the original firmware (1.2.6) using SuperOneClick
Click to expand...
Click to collapse
derp
and yes flash 1.2.6
Flashed it successfully, Superuser was removed, no problems. Thanks so much for the help!
Hi, there are probably numerous questions similar to mine, but I couldn't find the right thread for me.
I recently unlocked my atrix's bootloader, and tried to update to the gingerbread update. Ultimately, I wanted to flash the Alien rom, but the gingerbread update (not the OTA one), caused my phone to be stuck on the Moto logo, so I flashed the 1.2.6 sbf on my phone.
Now, I'm not sure what I should do to update my phone to gingerbread since I read that if I update directly from 1.2.6, I will hard break my phone. What should I do?
By the way, I have been having troubles with an update to 1.8.3 via sbf. It keeps saying that the phone did not enumerate.
Thanks for all the help!!
phillyf8n said:
Hi, there are probably numerous questions similar to mine, but I couldn't find the right thread for me.
I recently unlocked my atrix's bootloader, and tried to update to the gingerbread update. Ultimately, I wanted to flash the Alien rom, but the gingerbread update (not the OTA one), caused my phone to be stuck on the Moto logo, so I flashed the 1.2.6 sbf on my phone.
Now, I'm not sure what I should do to update my phone to gingerbread since I read that if I update directly from 1.2.6, I will hard break my phone. What should I do?
By the way, I have been having troubles with an update to 1.8.3 via sbf. It keeps saying that the phone did not enumerate.
Thanks for all the help!!
Click to expand...
Click to collapse
I'm surprised you aren't already hardbricked.. Use the OTA updates until 1.8.3 (RSD shouldn't be used at all really) and then re-root and unlock whatever using: http://forum.xda-developers.com/showthread.php?t=1182871.
If it did not reenumerate, then all you should do is boot back into RSD and see whether that fixes it.
http://forum.xda-developers.com/showthread.php?t=1163342
this gives stock 2.3.4 without touching bootloader
Hi Guys,
I have successfully installed Gobstopper Bell 2.2.2 and then proceed with updating thru OTA to 2.3.4. It all went well and my phone is working.
after a few minutes, i realized i do not have the CWM recovery anymore and my phone is no longer unlocked.
Can i still use the Ihop unlocker here. http://forum.xda-developers.com/showthread.php?t=1136261
and can someone please explain to me the 1.8.3 bricks coz i keep seeing this revision, that if you go higher than 1.8.3 and then revert back to a lower version, you will get a brick. ive been trying to understand this for days now but i can't find it anywhere. is this the android version? baseband? system version or kernel?
If ur att atrix user and after ota 2.3.4 u sbf back to old version ull brick ur phone.
If ur int user, and want to go back use gobstoper or fruitcake it will be like a chicken.
so i had the photon all workin great did few mods, somewhere along the lines i flashed the morpho zip mod coming from the vibrant which was supposed a partial port and not ready for use, then i got force closes like mad, nothin worked, so i went to cwm recovery and for some reason my nandroid for stock backup, says md5sum mismatch
so now I had no choice but to install a rom which i dont want, is there a stock,pure stock rom with root anything close to stock, I am rooted I am unlocked and I do have cwm recovery, but I wanted to flash sbf via rsdlite, but of course i cant find the correct link or sbf file
i used the 1mb bootloader file to unlock the device , but that doesnt apparentally have the goods to redo the whole O.S
Any help would be gratefull for links to sbf that actually are up and working..
Also would it still be normal for sbf to fail after flash which supposedly means it worked cause thats what it did for the unlock flash, it failed but really worked, i guess thats what its supposed to say.
Here is a list of quite a few(maybe all?) of the stock SBF files and dl links. And as far as it showing it failed, mine also did that and i know while unlocking its supposed to say that, but as far as other stock SBF files im not sure.
I flashed this http://www.filefactory.com/file/cfbc5d2/n/update_1024_working_data_zip
And lost all root privelages why is that
I am unlocked and was rooted on djbliss oneclick exploit after flashing this update lost root but superuser is on device
Sent from my MB855 using XDA Premium App
You flashed back to a stock SBF, correct? You will lose root and it will relock your bootloader, flashing to a stock SBF. Flashing a SBF should also wipe out all apps, including superuser.
Hi, I used TB at first, then I found NoBloat. When I used TB I froze some apps maybe even uninstalled them I can't remember but now I can't update OTA because I am missing SmartCarDock.apk. The odex is there.. I don't know if the OTA will be missing other apks.. I did a factory reset but the missing app did not come back. So what can I do to get my phone back to an OTA state?
Thanks
Is there noone who can point in the right direction?
My phone info:
651.73.30-XT910.NonEFIGSRetail.en.EU
android 2.3.5
6.5.1-73_SPU-11-M1-2
How do I confirm that I have unrooted? Superuser does not have root anymore, but it is still installed in system/app... Is it full unrooted?
Can I re-flash with 2.3.5 to get it back to stock so I can flash the OTA from moto or should I just do the manual flash using the 1.7 utility?
Thanks
micnolmad said:
Is there noone who can point in the right direction?
My phone info:
651.73.30-XT910.NonEFIGSRetail.en.EU
android 2.3.5
6.5.1-73_SPU-11-M1-2
How do I confirm that I have unrooted? Superuser does not have root anymore, but it is still installed in system/app... Is it full unrooted?
Can I re-flash with 2.3.5 to get it back to stock so I can flash the OTA from moto or should I just do the manual flash using the 1.7 utility?
Thanks
Click to expand...
Click to collapse
Your stock fastboot file:
http://sbf.droid-developers.org/umt...SASPDRRTCEE_HWp2b_Service1FF_fastboot.xml.zip
Things needed for flashing fastboot:
http://forum.xda-developers.com/showthread.php?t=1539192
REMEMBER TO CHARGE TO BATT TO FULL FIRST! (Many have ignored this and ended up (soft)bricking their phone)