[Q] Non-Responsive Touchscree & ODIN Won't Flash - Galaxy S III Q&A, Help & Troubleshooting

Ok, I flashed the experimental 4.2.1 update from temasek earlier. flashed his custom kernel. all worked fine.
Told me my SD Card was 'damaged', which I now understand just needed a fix which was provided. However I decided to just forget it and restore my nandroid backup i'd taken the previous night.
Checked the folder was there, which it was, so booted to CWM, did all the wipes and chose "restore". much to my horror, it failed to find any files.
stupid mistake part: i decided to flash the perseus kernel back over the top to see if the CWM would recognise my nandroid files and restore them
the screen just went mad - had blue lines all over the place, the samsung logo jumped about and the screen went off.
i booted back to CWM and found the touchscreen was unresponsive. everything else worked - buttons, CWM. The phone is also recognised in ODIN, so I grabbed the latest stock JB leak and flashed it. it flashed fine, but it was a middle eastern rom, which didn't help, and the touchscreen was still dead.
the PC still recognised it, so i coped the temasek files back on to see if i could re-flash those, which i did, but still no luck with the touchscreen.
flashed the JB leak again with ODIN, which worked. plugged it in to the PC and copied across a nandroid backup folder i'd taken earlier in the evening last night, since the other one seems to not work. rebooted and it still wouldn't find it.
Now i've got the latest stock rom for the uk but ODIN just won't flash anything - the phone is recognised, the MD5 sum on the rom checks out but i always get "Complete(Write) operation failed" error each time. I plug the phone in to the PC, and it recognises it just fine, but KIES is sitting on the "connecting" screen and not doing anything - i've reinstalled the latest drivers as well.
I'm starting to be resigned to the fact i've killed it, but if anyone has any ideas, i'd be hugely grateful - thankyou

touchscreen dead is getting more and more common. Not sure what is going on but if u cant flash anything from odin maybe u have dead mmc chip or something. Hopefully you resolve it or a trip to sammy service centre hopefully can fix under warranty for u
Edit close down all kies software whilst using odin
Sent from my GT-I9300 using XDA Premium HD app

i dont have warranty as the phone was bought second hand.
i'm just on the phone to my insurance providers though for accidental damage ..it might mean i have to drop it downstairs though !
ooeerr .. rebooted my PC, reconnected to ODIN and it's flashing the UK Stock ROM i got .. fingers crossed. I really don't want to have to drop it downstairs. The insurers will want to inspect it and if there's a custom rom on it, it might get bounced

hankhandsome said:
Ok, I flashed the experimental 4.2.1 update from temasek earlier. flashed his custom kernel. all worked fine.
Told me my SD Card was 'damaged', which I now understand just needed a fix which was provided. However I decided to just forget it and restore my nandroid backup i'd taken the previous night.
Checked the folder was there, which it was, so booted to CWM, did all the wipes and chose "restore". much to my horror, it failed to find any files.
stupid mistake part: i decided to flash the perseus kernel back over the top to see if the CWM would recognise my nandroid files and restore them
the screen just went mad - had blue lines all over the place, the samsung logo jumped about and the screen went off.
i booted back to CWM and found the touchscreen was unresponsive. everything else worked - buttons, CWM. The phone is also recognised in ODIN, so I grabbed the latest stock JB leak and flashed it. it flashed fine, but it was a middle eastern rom, which didn't help, and the touchscreen was still dead.
the PC still recognised it, so i coped the temasek files back on to see if i could re-flash those, which i did, but still no luck with the touchscreen.
flashed the JB leak again with ODIN, which worked. plugged it in to the PC and copied across a nandroid backup folder i'd taken earlier in the evening last night, since the other one seems to not work. rebooted and it still wouldn't find it.
Now i've got the latest stock rom for the uk but ODIN just won't flash anything - the phone is recognised, the MD5 sum on the rom checks out but i always get "Complete(Write) operation failed" error each time. I plug the phone in to the PC, and it recognises it just fine, but KIES is sitting on the "connecting" screen and not doing anything - i've reinstalled the latest drivers as well.
I'm starting to be resigned to the fact i've killed it, but if anyone has any ideas, i'd be hugely grateful - thankyou
Click to expand...
Click to collapse
unfortunately your touchscreen died and your only option is to bring it for warranty because of the bad flash, if you have warranty i suggest follow my simple guide here.
http://forum.xda-developers.com/showthread.php?t=2074756
---------- Post added at 01:52 PM ---------- Previous post was at 01:49 PM ----------
hankhandsome said:
i dont have warranty as the phone was bought second hand.
i'm just on the phone to my insurance providers though for accidental damage ..it might mean i have to drop it downstairs though !
ooeerr .. rebooted my PC, reconnected to ODIN and it's flashing the UK Stock ROM i got .. fingers crossed. I really don't want to have to drop it downstairs. The insurers will want to inspect it and if there's a custom rom on it, it might get bounced
Click to expand...
Click to collapse
still follow the guide so the insurance will not detect that you have been rooted before

chris151722 said:
still follow the guide so the insurance will not detect that you have been rooted before
Click to expand...
Click to collapse
i'll see what i can do but it's now stuck in a bootloop after flashing the rom i grabbed earlier, so will try another one.
i might have to kill it stone dead if none of this works

each rom i try in ODIN never boots - just goes into a bootloop.
i suppose if the insurers do inspect it, they may well not be able to get to see the flash counter if they can't boot it up - so it'll have a stock, unrooted rom on it anyway, so does anyone think i'll be ok ?

hankhandsome said:
i'll see what i can do but it's now stuck in a bootloop after flashing the rom i grabbed earlier, so will try another one.
i might have to kill it stone dead if none of this works
Click to expand...
Click to collapse
after you flash stock firmware go to recovery try to factory reset
---------- Post added at 02:15 PM ---------- Previous post was at 02:11 PM ----------
Ausboy 2011 said:
touchscreen dead is getting more and more common. Not sure what is going on but if u cant flash anything from odin maybe u have dead mmc chip or something. Hopefully you resolve it or a trip to sammy service centre hopefully can fix under warranty for u
Edit close down all kies software whilst using odin
Sent from my GT-I9300 using XDA Premium HD app
Click to expand...
Click to collapse
its a bad flash from odin and bad flash thru phone the reason why touch is dying.

chris151722 said:
its a bad flash
Click to expand...
Click to collapse
every rom though ?
just tried another one and it's bootlooping ..

hankhandsome said:
every rom though ?
just tried another one and it's bootlooping ..
Click to expand...
Click to collapse
can you access recovery mode? if so try to wipes or factory reset before and after firmware flash

chris151722 said:
can you access recovery mode? if so try to wipes or factory reset before and after firmware flash
Click to expand...
Click to collapse
at the moment i can't access anything - it just sits at the samsung logo now. CWM is now no longer accessible either - i pop the battery, wait a few minutes then put it back in. I hold down Up/Power/Middle button and the Samsung Logo flashes, but nothing happens.
I can still put it in to download mode and flash roms with odin, but nothing happens .. i think i'm going to have to accept it's dead
My last roll of the dice is to grab one of the earlier roms from this thread
http://forum.xda-developers.com/showthread.php?t=1835931
and see what that does in ODIN

FYI:
1. you don't have to wipe anything before restoring a backup, it doesn't make a difference.
2. insurance fraud is a felony

Glebun said:
FYI: 2. insurance fraud is a felony
Click to expand...
Click to collapse
Good job i don't live in the US then ..

I'm pretty sure it's illegal no matter where you live

Well I don't particularly want to get into an argument here, as i'd much prefer a phone that works so i'll just thank you for your input.

i think you have to solve the bootloop issue first by searching in the forum, im not expert so cant give you better advice on bootloop,

chris151722 said:
i think you have to solve the bootloop issue first by searching in the forum, im not expert so cant give you better advice on bootloop,
Click to expand...
Click to collapse
thanks. it doesn't actually bootloop now, it just sits on the glowing samsung logo and doesn't move.
i just want to get a stock rom back on it and i'm going to just let it go. i'm a bit concerned that on the download screen it says "Custom Binary Download: Yes (19 Counts)". I know I did reset the flash counter not too long ago before I flashed the Darky Rom, so if this is indeed the flash counter, then i've obviously not done something right, so it'll show multiple flashes ..

ok, we've had developments ..
i actually got it in to CWM (don't know how..) and did a factory reset. it then did boot up into the OS but - no touchscreen still.
however, i've just tried connecting it to KIES and it's detected it so i'm going to try the emergency recovery thing ..
he says, as he selects the option and KIES then goes back to "connecting" .. *GROAN* .. and then comes back to tell me it's not supported to upgrade firmware via KIES .. *BIGGER GROAN*

Ok, downloaded and flashed an earlier rom for the UK but still no luck with the screen. Kies won't do any kind of emergency firmware upgrade either so that's that. i'll have to try and get one of those OTG USB dongles so i can get the flash counter reset though ..

hankhandsome said:
Ok, downloaded and flashed an earlier rom for the UK but still no luck with the screen. Kies won't do any kind of emergency firmware upgrade either so that's that. i'll have to try and get one of those OTG USB dongles so i can get the flash counter reset though ..
Click to expand...
Click to collapse
Does not reset flash counter only allows access to download mode. Traingle Away to reset flash counter .
jje

JJEgan said:
Does not reset flash counter only allows access to download mode. Traingle Away to reset flash counter .
jje
Click to expand...
Click to collapse
i'm aware of that - that's why I've ordered the OTG dongle so I can use my desktop mouse to go in and install triangle away

Related

Bootlooping - even after flashing Siyah

A couple days ago, my Galaxy s2 i-777 (unrooted stock) would not start up past the splash screen. Today, I finally tried to do a factory reset in recovery mode, and there was a message about not being able to access some csc folder. My phone remained in bootloop, and when I tried to get back to recovery mode - I would see the dreadful "Deleting Cryption Meta data" message.
I proceeded to try the instructions in this post : http://forum.xda-developers.com/showpost.php?p=27368753&postcount=7
I managed to flash my phone with CWM5.0.3 using Odin (The PDA option - is that right?) It changed my splash screen to one with 9100 on the front, and a yellow triangle. My flash counter was also incremented to 1.
I then attempted to flash with the Siyah kernel again using Odin (with the PDA option). The good news is that I can now get to Siyah's Recovery mode, but the phone is still bootlooping. And I'm pretty sure my flash counter has incremented again.
Here's my difficulty:
1. I want to find a way to get my images/videos off my phone. (We just had our first kid and all his photos from birth are in there :|)
2. I plan to get a jig, reset my counter and restore to stock unrooted. Is this still possible?
How do I do these two things?
Thanks so much everyone - I've really appreciated all the posts I've been reading for assistance already!
=======
So I figured out how to get my photos/videos off - amazingly, even after a factory reset - they are all still in my phone! I decided to re-flash CWM as suggested in the post linked above. Went to the recovery menu and did a clear data/factory reset. I was about to try the format sd card option (which admittedly I had skipped earlier because I was concerned about losing photos/vids) but then decided to try mounting the sd card instead. Then I reconnected the phone to my computer and was able to use it as a USB storage device, and view all my files! Now I'm copying over my app data, pics and videos.
I just ordered a jig off amazon, and hopefully I'll be able to reset my counter and return to stock. I'm still not sure why my phone is bootlooping though. Any ideas?
droidiana said:
So I figured out how to get my photos/videos off
Click to expand...
Click to collapse
Happy to see this my dude, glad you got them back!!!! Congrats on the new baby good times! I can't really be of help but this thread has some more info you can read maybe it can help you.... The link you posted is posted in post 2 via creepyncrawly but there is more info in that post. Maybe your problem is just a random hardware failure but always best to have all the info you can get..... GL if you have more questions creepyncrawly is the coolest dude and will help you!!!
http://forum.xda-developers.com/showthread.php?t=1738663 Some info 4 you
EDIT Once you get your jig that should clear the flash counter and put the phone in to download mode then you could flash a stock package to get your phone back working!!! Of course depending if it's a hardware problem....
http://forum.xda-developers.com/showpost.php?p=18859438&postcount=199 Here the link to the stock package or rooted stock One click Odin
There is also another way to remove the triangle and the counter via an app i have used it several times and it works great here is the link for it
http://www.xda-developers.com/android/triangleaway-reset-flash-counter-tool/
The_Fallen_angel said:
There is also another way to remove the triangle and the counter via an app i have used it several times and it works great here is the link for it
http://www.xda-developers.com/android/triangleaway-reset-flash-counter-tool/
Click to expand...
Click to collapse
You are correct but, he would be flashing KH7 GB so the jig would clear it.... Triangle Away works on ICS and has risks "!!! THIS IS A DANGEROUS OPERATION AND COULD POTENTIALLY BRICK YOUR DEVICE. PROCEED AT YOUR OWN RISK. A USB JIG IS PREFERRED IF YOU HAVE A WORKING ONE !!!" (and by brick I mean brick - only a board replacement or a JTAG unit will be able to save you, don't mess with boot(loader) stuff unless you *really* mean it!) via Chainfire you're better never tripping the counter......
The_Fallen_angel said:
There is also another way to remove the triangle and the counter via an app i have used it several times and it works great here is the link for it
http://www.xda-developers.com/android/triangleaway-reset-flash-counter-tool/
Click to expand...
Click to collapse
AFAIK, this tool only works with ICS.
Please inform.
Is it a boot loop-where your screen will go black attempting to continue booting, then re initiate the previous animation? Or just a failure to boot-where it's just hanging on an animation with no black pauses to indicate any kind of process completion?
Sent from my broken screen beast machine
Cmoore0965 said:
Is it a boot loop-where your screen will go black attempting to continue booting, then re initiate the previous animation? Or just a failure to boot-where it's just hanging on an animation with no black pauses to indicate any kind of process completion?
Sent from my broken screen beast machine
Click to expand...
Click to collapse
It a boot loop if the phone tries to boot over and over again, only reaching a certain point, usually the initial (kernel) splash screen, then restarting again. However, many fail to boot scenarios are commonly lumped into the somewhat generic term boot loop.
Poor wordage on my part lol, that differentiation was what I was trying to ask the op
Sent from my broken screen beast machine
votinh said:
AFAIK, this tool only works with ICS.
Please inform.
Click to expand...
Click to collapse
I have used it with JB and had no problems I do not know if it was intended to work with JB but it did on my sgs2 ( I guess I just got lucky ) I have used it 3 times on ICS and once with JB and While I will admit it is VERY RISKY I too would recommend the jig but was just giving another option

Cant't get my S2 to start. No image AT ALL

I had just flashed my phone to CF-Root 5.6. It all went very well, took about 8 seconds, and it rebootet normally.
Then my plan was to update to JELLYBAM - v5.1.0.
I copied the .zip file into the SD card, and entered recovery mode.
I Wiped the data/cache, and installed it.
In the middle of the installation, all of sudden, the phone went black.
I tried to turn it on, put out and in the battery, enter recovery mode and download mode and connect it to the pc. Nothing worked.
I can't get any picture on the phone anymore, and i really need help with this. I have tried everything that i know about.. :crying:
How do i fix this??
rotweb 1-2
Simmyen said:
I had just flashed my phone to CF-Root 5.6. It all went very well, took about 8 seconds, and it rebootet normally.
Then my plan was to update to JELLYBAM - v5.1.0.
I copied the .zip file into the SD card, and entered recovery mode.
I Wiped the data/cache, and installed it.
In the middle of the installation, all of sudden, the phone went black.
I tried to turn it on, put out and in the battery, enter recovery mode and download mode and connect it to the pc. Nothing worked.
I can't get any picture on the phone anymore, and i really need help with this. I have tried everything that i know about.. :crying:
How do i fix this??
Click to expand...
Click to collapse
Hey the exact same thing happened to me yesterday, and I was also installing JellyBam. I followed the exact same steps as you and my phone also went black during installation and is now hard bricked and needs to be JTAG repaired in order to work.
Looks like you guys have encountered phonus brickedus
This happened to me too, yesterday. There are lots of threads that discuss these things. If you cant access anything you can try a jig. (look it up)
I, however, tried jig and JTAG but no solutions found so i sent it to service center. Now i just pray to god that they don't find out that my phone's rooted (which makes my warranty vioded).
As far as my expertise says, if you cant find a Jig or JTAG solution, send it to service. When my phone arrives (if it does) i can tell you if they knew that i had rooted or not.
Regards.
PS. Did you follow it's flashing steps carefully?
WardenBerret said:
Looks like you guys have encountered phonus brickedus
This happened to me too, yesterday. There are lots of threads that discuss these things. If you cant access anything you can try a jig. (look it up)
I, however, tried jig and JTAG but no solutions found so i sent it to service center. Now i just pray to god that they don't find out that my phone's rooted (which makes my warranty vioded).
As far as my expertise says, if you cant find a Jig or JTAG solution, send it to service. When my phone arrives (if it does) i can tell you if they knew that i had rooted or not.
Regards.
PS. Did you follow it's flashing steps carefully?
Click to expand...
Click to collapse
If Jtag couldn't bring it back to life, they won't know, don't worry
WardenBerret said:
PS. Did you follow it's flashing steps carefully?
Click to expand...
Click to collapse
Yes. I followed them very carefully. Did everything that i was supposed to do..
Could it be a bug in the kernel?
Simmyen said:
Yes. I followed them very carefully. Did everything that i was supposed to do..
Could it be a bug in the kernel?
Click to expand...
Click to collapse
What ROM were you on? 4.0.4?
gastonw said:
What ROM were you on? 4.0.4?
Click to expand...
Click to collapse
Yep... the official 4.0.4
gastonw said:
What ROM were you on? 4.0.4?
Click to expand...
Click to collapse
What diff does that make? He was on custom kernel not stock.
Did you guys have at least 55% battery? On some occasions flashing roms can use allot of processing power and drain unusual amounts of battery. For example sometimes I have been on full battery, flashed a rom and its used 40% so if you guys was on low battery it could have died and screwed up your rom, kernel or worse your bootloader resulting in brick.
Sure that custom kernel was safe atheist?
Sounds like emmc to me.....
Sent from my GT-I9100 using xda app-developers app
rsr1 said:
Hey the exact same thing happened to me yesterday, and I was also installing JellyBam. I followed the exact same steps as you and my phone also went black during installation and is now hard bricked and needs to be JTAG repaired in order to work.
Click to expand...
Click to collapse
Exactly the same with me i9100. how can we make it?
Simmyen said:
I had just flashed my phone to CF-Root 5.6. It all went very well, took about 8 seconds, and it rebootet normally.
Then my plan was to update to JELLYBAM - v5.1.0.
I copied the .zip file into the SD card, and entered recovery mode.
I Wiped the data/cache, and installed it.
In the middle of the installation, all of sudden, the phone went black.
I tried to turn it on, put out and in the battery, enter recovery mode and download mode and connect it to the pc. Nothing worked.
I can't get any picture on the phone anymore, and i really need help with this. I have tried everything that i know about.. :crying:
How do i fix this??
Click to expand...
Click to collapse
I also don't think it was the bug as the phone died while flashing the rom, not during the wipe. Perhaps it was a bad download or a link that took users to a rom for the wrong model of phone. Hopefully every user effected will get there phone repaired.
Sent from my GT-I9100 using xda premium

Bootloop. Can't get into recovery.

Not sure what the CM updater uses, but I have tried to update with Philz, got stuck in an installation loop of the update itself.
Tried to use my jig and flash back to stock right now, got into download mode and was able to flash back to stock, but right now, I got into download with the jig, flashed stock ROM, and got a bootloop but am UNABLE to get into any recovery at all.
Pretty screwed up. Really need some suggestions here, guys.
Any ideas?!
I can get into download mode and flash via Odin (USB drivers installed via Windows 8)
Flashes successfully, installs stock recovery, reboots into bootloop.
No idea how to fix it.
Not a noob here. Nothing is working.
Any suggestions would be greatly appreciated.
I had the same problem and I ended up finding a working CWM tar file that can be installed using ODIN and I was then able to boot into CWM fine.
This is the exact file name: recovery-cwmtouch-6.0.2.7-GTI9300
I don't remember where I downloaded it from, but if you Google the exact file name I am pretty sure you'll find it. Just flash it using Odin and you'll be good to go.
TarekElsakka said:
I had the same problem and I ended up finding a working CWM tar file that can be installed using ODIN and I was then able to boot into CWM fine.
This is the exact file name: recovery-cwmtouch-6.0.2.7-GTI9300
I don't remember where I downloaded it from, but if you Google the exact file name I am pretty sure you'll find it. Just flash it using Odin and you'll be good to go.
Click to expand...
Click to collapse
Well, now I'm even more f****ed than before, because I had a zero count, but after trying this, I got a custom count in download, and I still cannot get into recovery.
Nothing works.
Bye, bye warranty.
Edit:
The 6.0.2.7 version by MSKIP worked, but the updated one did not.
I got recovery, now I'll see if I can flash stock and recovery to get my counter back to zero.
Sorry to hear about the counter. I'd suggest rooting your device, installing Triangle Away, resetting your flash counter and then finally unrooting your device by installing stock ROM from SamMobile or such. That's the best route if you want your warranty to remain intact.
TarekElsakka said:
Sorry to hear about the counter. I'd suggest rooting your device, installing Triangle Away, resetting your flash counter and then finally unrooting your device by installing stock ROM from SamMobile or such. That's the best route if you want your warranty to remain intact.
Click to expand...
Click to collapse
He probably needs a booting phone first.
But like he said, he's not a noob. He knows all that
Sent from my GT-I9300 using Tapatalk 2
rootSU said:
He probably needs a booting phone first.
But like he said, he's not a noob. He knows all that
Sent from my GT-I9300 using Tapatalk 2
Click to expand...
Click to collapse
Hi all,
I am stuck in the very same problem as of today!
I don't know what to do!
One more weird symptom is that when I tried to charge the Note battery..it suddenly went to bootloop again!
The battery was 100% at the begining of that damn update process!
I don't know what to do..all suggestions are so welcomed.
Iceberg707 said:
Hi all,
I am stuck in the very same problem as of today!
I don't know what to do!
One more weird symptom is that when I tried to charge the Note battery..it suddenly went to bootloop again!
The battery was 100% at the begining of that damn update process!
I don't know what to do..all suggestions are so welcomed.
Click to expand...
Click to collapse
If you have a Note, then advice we give here may not be relevant and may be unsafe.

[Q] SGH-i717 Home Keys not working

Hi there i have a SGH-i717 with AT&T 2.3.4 Stock installed..I did have Cyanogen 10.1 and Avatar all installed in the last 72hrs..I have wiped all that and did a return to the stock AT&T thinking that my HOME keys would return..NO LUCK..The problems started about 4 days ago when the phone started turning itself off automatically..I changed custom ROM's etc to try and fix the problem..then i read to use Kies to try and do a Firmware Upgrade and Initialization to go back to the start when i first got the phone..But now Kies will NOT recognise the phone..I have re-installed drives, Kies to no avail..Any tips ?
Also someone suggested to flash this kernel h0tcakez-JB-Kernel-v2.3.5-ALT but when i tried through system recovery is gives a falied error..
I have nothing on the phone i need to worry about loosing...Cheers
kakadu44 said:
Hi there i have a SGH-i717 with AT&T 2.3.4 Stock installed..I did have Cyanogen 10.1 and Avatar all installed in the last 72hrs..I have wiped all that and did a return to the stock AT&T thinking that my HOME keys would return..NO LUCK..The problems started about 4 days ago when the phone started turning itself off automatically..I changed custom ROM's etc to try and fix the problem..then i read to use Kies to try and do a Firmware Upgrade and Initialization to go back to the start when i first got the phone..But now Kies will NOT recognise the phone..I have re-installed drives, Kies to no avail..Any tips ?
Also someone suggested to flash this kernel h0tcakez-JB-Kernel-v2.3.5-ALT but when i tried through system recovery is gives a falied error..
I have nothing on the phone i need to worry about loosing...Cheers
Click to expand...
Click to collapse
If you are on stock 2.3.4 and tried to flash that kernel .. that is why it failed .. it would be the wrong kernel for that rom. Did you flash a stock rom in recovery? If so then I would suggest using oden to return to stock . then see what you end up with.
SGH-i717 Home Keys not working
Bubbajoe40356 said:
If you are on stock 2.3.4 and tried to flash that kernel .. that is why it failed .. it would be the wrong kernel for that rom. Did you flash a stock rom in recovery? If so then I would suggest using oden to return to stock . then see what you end up with.
Click to expand...
Click to collapse
Thanx for you reply..I did however flash stock 2.3.4 from oden..I deleted everything in recovery then went to oden and flashed the stock rom..Should i unroot/unbrick flash from oden?
That article about returning to original settings in Kies seems to make sense except for the fact that i cannot get Kies to recognise the phone...
Are we talking about Software ou Hardare issue in your opinion?
Cheers
Could be a hardware issue. Try this ... Put the phone into download mode then connect to the pc. Use the cable that came with the phone. Also use a port on the back of the pc ..not a hub. Then open kies and do the emergency firmware update.
Also ... When you used Odin to go to stock ..you installed the 3e recovery ..that's why it failed to flash. Which is a good thing. That kennel would have boot looped you.
Sent from my Big Ass Outlaw Phone
SGH-i717 Home Keys not working
Bubbajoe40356 said:
Could be a hardware issue. Try this ... Put the phone into download mode then connect to the pc. Use the cable that came with the phone. Also use a port on the back of the pc ..not a hub. Then open kies and do the emergency firmware update.
Also ... When you used Odin to go to stock ..you installed the 3e recovery ..that's why it failed to flash. Which is a good thing. That kennel would have boot looped you.
Sent from my Big Ass Outlaw Phone
Click to expand...
Click to collapse
Okay i installed from ODIN Stock 2.3.4.....I dont have a port on the back of the PC to use as i only have a Laptop...Kies will not recognise the phone..Even when the phone is at Stock it takes soooo long to boot up..approx 2 mins..can i not run the emergency firmware update from ODEN? If so where can i find the software please..
Also even when i go into recovery mode it shows error signs..it wont let me wipe cache or wipe data/factory reset..
cheers
kakadu44 said:
Okay i installed from ODIN Stock 2.3.4.....I dont have a port on the back of the PC to use as i only have a Laptop...Kies will not recognise the phone..Even when the phone is at Stock it takes soooo long to boot up..approx 2 mins..can i not run the emergency firmware update from ODEN? If so where can i find the software please..
Also even when i go into recovery mode it shows error signs..it wont let me wipe cache or wipe data/factory reset..
cheers
Click to expand...
Click to collapse
The lap top is fine. Emergency firmware is through kies and not Odin. You need download mode ... Not recovery.
Sent from my Big Ass Outlaw Phone
Bubbajoe40356 said:
The lap top is fine. Emergency firmware is through kies and not Odin. You need download mode ... Not recovery.
Sent from my Big Ass Outlaw Phone
Click to expand...
Click to collapse
It will not recognise the phone in KIES!!!!! i have uninstalled USB drivers and re-installed and still it will not recognise the phone..Is there USB debugging in Stock 2.3.6? If so where do i find it in Settings pls? thanx
kakadu44 said:
It will not recognise the phone in KIES!!!!! i have uninstalled USB drivers and re-installed and still it will not recognise the phone..Is there USB debugging in Stock 2.3.6? If so where do i find it in Settings pls? thanx
Click to expand...
Click to collapse
Please can you advise me what is the best way to WIPE my phone of ALL my info to start over again, just like a complete wipe on my laptop..cheers
Have you tried here, briefmobile. com /exclusive-ucld3-ics-leak-for-the-att-galaxy-note
sp73smith said:
Have you tried here, briefmobile. com /exclusive-ucld3-ics-leak-for-the-att-galaxy-note
Click to expand...
Click to collapse
Hi there thanx for your answer..I have not tried at that site..this program will do what? COMPLETELY wipe my phone??cheers
It will, it completely erases everything. Replaces recovery and losses root. Very simple to use, I use it every other month.
Sent from my SAMSUNG-SGH-I717 using xda app-developers app
SGH-i717 HOME keys are not working...
sp73smith said:
It will, it completely erases everything. Replaces recovery and losses root. Very simple to use, I use it every other month.
Sent from my SAMSUNG-SGH-I717 using xda app-developers app
Click to expand...
Click to collapse
Yep i used it..very good..But my original and main problem..Continues..NONE of my HOME keys are working..I fear that it is a Hardware issue with the SGH-i717..I guess i have to take it to Samsung for repair..Until someone else can give me a solution..I have tried everything and nothing has worked..No HOME keys..Cheers
Definitely not a hardware issue, there where some changes made IIRC in the kernel driver files, once flashed they prevented the homerow buttons from working normally, the only way I ever found to make them work right was to flash the Flappjaxxx alternate kernel series, let it boot, then return completely to stock!
If you dig around, FJ's alt kernel's are around here somewhere!
SGH-i717 HOME keys are not working...
Hammerfest said:
Definitely not a hardware issue, there where some changes made IIRC in the kernel driver files, once flashed they prevented the homerow buttons from working normally, the only way I ever found to make them work right was to flash the Flappjaxxx alternate kernel series, let it boot, then return completely to stock!
If you dig around, FJ's alt kernel's are around here somewhere!
Click to expand...
Click to collapse
Good morning, well i believe i have finally arrived at a possible solution..I have searched hi and low for these Flappjaxxx alternate kernel ..I came up with a daunting array of alternatives for the complete amatuer as i am..I appreciate that your time is precious but i do need some general direction what exactly i am searching for..I have found this one but to be quite honest i am not sure if i need this whole ROM or just the Flappjaxxx alternate kernel'a..
http://db.communityrelease.com/developer_display.asp?DeveloperID=11381
https://github.com/flappjaxxx/kernel_samsung_sghi717
Also when i do eventually obtain the Kernel that i am looking for can i use ODIN to flash it? I installed this ROM which i beleive to be stock already..You wrote that i need to return COMPLETELY to stock..What is that 2.3.6???
http://briefmobile.com/exclusive-ucld3-ics-leak-for-the-att-galaxy-note
I appreciate any further input you may be able to supple..regards kakadu44
kakadu44 said:
Good morning, well i believe i have finally arrived at a possible solution..I have searched hi and low for these Flappjaxxx alternate kernel ..I came up with a daunting array of alternatives for the complete amatuer as i am..I appreciate that your time is precious but i do need some general direction what exactly i am searching for..I have found this one but to be quite honest i am not sure if i need this whole ROM or just the Flappjaxxx alternate kernel'a..
http://db.communityrelease.com/developer_display.asp?DeveloperID=11381
https://github.com/flappjaxxx/kernel_samsung_sghi717
Also when i do eventually obtain the Kernel that i am looking for can i use ODIN to flash it? I installed this ROM which i beleive to be stock already..You wrote that i need to return COMPLETELY to stock..What is that 2.3.6???
http://briefmobile.com/exclusive-ucld3-ics-leak-for-the-att-galaxy-note
I appreciate any further input you may be able to supple..regards kakadu44
Click to expand...
Click to collapse
My work schedule is absolute hell, and due to people flaking at work I have been called in 2x to cover on my only days off...
Needless to say, im about to pass out, so im going to make this useless post...
Either I, or someone else can link you to a FJ rom, and the FJ alternate kernel that match, what you will need to do prior is make sure you have EVERYTHING you want/need, backed up to GMail (in the case of Phone logs, SMS and MMS with the Backup to GMail app, yes, im whoring this fantastic app out) AND to your computer, NO not your SD card, but your computer!
Make sure you have the latest recovery (TWRP 2.5.0.0 is what I have, but whatever TWRP is latest will do), wipe everything, then install the rom, boot, wait 10min, reboot into recovery, flash the alt kernel, boot, wait 10min, then test the home/back/menu/search key row, they should work, at this point, you CAN go back to the 2.x.x rom you where running, but if you have an i717, I have had nothing but love for the Stock rom update on AT&T once I performed a complete ODIN to it (flashing the ones here on the forum's resulted in random reboots here and there, and while less then ever before, still annoying, after an ODIN however, havent had a random reboot yet!).
There are issues with the GNote i717 JB release, many posted here, and quite a few here:
http://forums.att.com/t5/Android-Di...getting-Jelly-Bean-update/td-p/3421041/page/5
Including my own rant towards the bottom...
Needless to say, ill try and get on tomorrow to get the right links you will need, or some other kind sirs can...... either way, I have fallen asleep in the middle of writing this, so if something doesnt make sense... well, sleep writing was never my skill of choice
SGH-i717 HOME keys are not working...
Hammerfest said:
My work schedule is absolute hell, and due to people flaking at work I have been called in 2x to cover on my only days off...
Needless to say, im about to pass out, so im going to make this useless post...
Either I, or someone else can link you to a FJ rom, and the FJ alternate kernel that match, what you will need to do prior is make sure you have EVERYTHING you want/need, backed up to GMail (in the case of Phone logs, SMS and MMS with the Backup to GMail app, yes, im whoring this fantastic app out) AND to your computer, NO not your SD card, but your computer!
Make sure you have the latest recovery (TWRP 2.5.0.0 is what I have, but whatever TWRP is latest will do), wipe everything, then install the rom, boot, wait 10min, reboot into recovery, flash the alt kernel, boot, wait 10min, then test the home/back/menu/search key row, they should work, at this point, you CAN go back to the 2.x.x rom you where running, but if you have an i717, I have had nothing but love for the Stock rom update on AT&T once I performed a complete ODIN to it (flashing the ones here on the forum's resulted in random reboots here and there, and while less then ever before, still annoying, after an ODIN however, havent had a random reboot yet!).
There are issues with the GNote i717 JB release, many posted here, and quite a few here:
http://forums.att.com/t5/Android-Di...getting-Jelly-Bean-update/td-p/3421041/page/5
Including my own rant towards the bottom...
Needless to say, ill try and get on tomorrow to get the right links you will need, or some other kind sirs can...... either way, I have fallen asleep in the middle of writing this, so if something doesnt make sense... well, sleep writing was never my skill of choice
Click to expand...
Click to collapse
READY AND WAITING..THANX
Okay thank you for reply..I am ready to go with the install/flash...
When you get time to direct me to the correct ROM and Kernel i would be much obliged..In the meantime enjoy your rest..Cheers Mick

[HELP]ODIN Stock Firmware Flash Issue. Virgin GT-I9300

I'm having real issues trying to get a stock ROM on my Virgin Mobile S3 (GT-I9300) and I'm hoping you guys can help me. I've looked absolutely everywhere for a solution but so far nothing has worked.
OK so a little history about the problem:
Using phone as normal, and then randomly turns off. Turn it back on and I get the two Samsung splash screens loop booting constantly. I boot into recovery mode and do a factory reset - same problem. Clear the cache - same problem. Send phone back to Virgin and they tell me I've rooted and installed a custom ROM which I absolutely have not but they have a screenshot with the custom counter showing '1'.
I've no idea how this is possible, but I would have remembered if I'd installed a custom ROM. Anyway, they send it back because I'm not going to fork out £100 for them to flash it.
So...lots of research later, I download the latest Odin (3.09), find the most likely stock ROM that will work with my phone (Carrier is Virgin Mobile UK). I find this ROM on SamMobile: I9300XXUGMK6_I9300OXAGMK6_BTU. Cannot for the life of me find an actual Virgin rom so this apparently should be fine as it's a generic EU build.
Fine, so I apply it using the AP selection in Odin, connect phone, it goes through and applies fine "PASS" etc.. and phone reboots automatically.
Now, it just sits at the Samsung splash screen (the static white text) and doesn't go any further. I've left it upwards of 10 minutes but no dice. So look online and find threads that suggest booting to recovery and doing a factory reset will do the trick. So try that (Power+volume up+home) and same problem - static splash screen. Balls.
So now I don't know what to do. I either need to try an actual Virgin ROM which doesn't seem to exist(?!) or my phone is truely bricked and I'll finally have a good reason to destroy the thing.
Can anyone let me know what the next steps should be? I would be eternally grateful.
Thanks in advance.
I found the s3 to be a pain when doing a reset. Basically do it twice. Wipe, flash, wipe then boot. As far as I know btu is correct but virmin mobile used to rent their airspace from tmobile who are now half ee. Such a minefield..
Sent from my GT-I9300 using Tapatalk
shivadow said:
I found the s3 to be a pain when doing a reset. Basically do it twice. Wipe, flash, wipe then boot. As far as I know btu is correct but virmin mobile used to rent their airspace from tmobile who are now half ee. Such a minefield..
Sent from my GT-I9300 using Tapatalk
Click to expand...
Click to collapse
When you say 'wipe' do you mean factory reset via recovery mode? Because I'm not able to access that. All I can get to is Download Manager to use with Odin...
I thought you said you could access recovery and you had cleared cache. In that case you are buggered. If it goes through the flashing phase and reboots but you still cannot get into recovery then you have 3 options..
1. Flash another rom but no lower than 4.3. Carrier shouldn't matter.
2. Full on flash with pit file (dangerous and can perma brick).
3. Return the phone under warranty and state that the flash counter also clocks official flashes too, samsung should know this as they make the phone.. staff need training if they say otherwise.
Sent from my GT-I9300 using Tapatalk
Try the rescue firmware from general forum, follow the instructions exactly as it includes a pit.
It sounds like nand failure, so it's possible that you won't be able to fix it.
Sent from my GT-I9300 using Tapatalk
I thought you said you could access recovery and you had cleared cache.
Click to expand...
Click to collapse
Apologies for not being clearer, before sending it back to Virgin for the warranty repair I could access the recovery mode fine, when I got it back I couldn't - whether that was caused by the flashing of the firmware or something Virgin did I don't know unfortunately.
Try the rescue firmware from general forum, follow the instructions exactly as it includes a pit.
Click to expand...
Click to collapse
Thanks for the tip - I've flashed the stock recovery and I can now get into recovery mode! Looks slightly different but I can now access the factory reset/wipe cache options so that's some improvement.
I'm just downloading the stock international ROM as per this thread http://forum.xda-developers.com/galaxy-s3/general/fix-s3-to-factory-unroot-stock-recovery-t2323847 but it's going to take a few hours. Thanks so much for your advice so far i'll report back once the download completes.
No joy
I can however get into download mode and recovery mode now. Is there anything else I can try? Is it possible I can get a custom recovery image on there and flash it with something other than the stock rom?
I've got a feeling you're correct and it could be a hardware fault. Virgin say I can pay £100 to get it fixed, if they have to replace the entire phone that would prove it wasn't 'tampering' that caused it so I could potentially get my money back I guess, if I complained. I think that might be my only option now.
Ok I just booted into recovery mode and I was greeted with this error:
Any ideas what this could mean?
crispin85 said:
Ok I just booted into recovery mode and I was greeted with this error:
Any ideas what this could mean?
Click to expand...
Click to collapse
I say this to people who have this sort of problem but I mention the dreaded word and they tend to ignore it but will tell you what to try anyway.
Install Kies 3 for android 4.3 (there I said it Kies) on the top menu bar click Tools then Firmware Upgrade and Installation
Follow the on screen instructions, this process will wipe the phone and install the most up to date original carrier / phone firmware, after this the phone should work and you can then root, flash roms etc , it may work for you so try it, don't just dismiss it because it refers to the use of Kies
ag4751 said:
I say this to people who have this sort of problem but I mention the dreaded word and they tend to ignore it but will tell you what to try anyway.
Install Kies 3 for android 4.3 (there I said it Kies) on the top menu bar click Tools then Firmware Upgrade and Installation
Follow the on screen instructions, this process will wipe the phone and install the most up to date original carrier / phone firmware, after this the phone should work and you can then root, flash roms etc , it may work for you so try it, don't just dismiss it because it refers to the use of Kies
Click to expand...
Click to collapse
Unfortunately I've already tried Kies, and it doesn't recognise the device when in recovery mode.
crispin85 said:
Unfortunately I've already tried Kies, and it doesn't recognise the device when in recovery mode.
Click to expand...
Click to collapse
Make sure you are using the USB cable supplied with the phone and it is connected direct to your PC USB port, ideally the ones on the back but don't connect through any multi USB port connectors.
The USB cables and how you connect can make a difference

Categories

Resources