Not sure what the CM updater uses, but I have tried to update with Philz, got stuck in an installation loop of the update itself.
Tried to use my jig and flash back to stock right now, got into download mode and was able to flash back to stock, but right now, I got into download with the jig, flashed stock ROM, and got a bootloop but am UNABLE to get into any recovery at all.
Pretty screwed up. Really need some suggestions here, guys.
Any ideas?!
I can get into download mode and flash via Odin (USB drivers installed via Windows 8)
Flashes successfully, installs stock recovery, reboots into bootloop.
No idea how to fix it.
Not a noob here. Nothing is working.
Any suggestions would be greatly appreciated.
I had the same problem and I ended up finding a working CWM tar file that can be installed using ODIN and I was then able to boot into CWM fine.
This is the exact file name: recovery-cwmtouch-6.0.2.7-GTI9300
I don't remember where I downloaded it from, but if you Google the exact file name I am pretty sure you'll find it. Just flash it using Odin and you'll be good to go.
TarekElsakka said:
I had the same problem and I ended up finding a working CWM tar file that can be installed using ODIN and I was then able to boot into CWM fine.
This is the exact file name: recovery-cwmtouch-6.0.2.7-GTI9300
I don't remember where I downloaded it from, but if you Google the exact file name I am pretty sure you'll find it. Just flash it using Odin and you'll be good to go.
Click to expand...
Click to collapse
Well, now I'm even more f****ed than before, because I had a zero count, but after trying this, I got a custom count in download, and I still cannot get into recovery.
Nothing works.
Bye, bye warranty.
Edit:
The 6.0.2.7 version by MSKIP worked, but the updated one did not.
I got recovery, now I'll see if I can flash stock and recovery to get my counter back to zero.
Sorry to hear about the counter. I'd suggest rooting your device, installing Triangle Away, resetting your flash counter and then finally unrooting your device by installing stock ROM from SamMobile or such. That's the best route if you want your warranty to remain intact.
TarekElsakka said:
Sorry to hear about the counter. I'd suggest rooting your device, installing Triangle Away, resetting your flash counter and then finally unrooting your device by installing stock ROM from SamMobile or such. That's the best route if you want your warranty to remain intact.
Click to expand...
Click to collapse
He probably needs a booting phone first.
But like he said, he's not a noob. He knows all that
Sent from my GT-I9300 using Tapatalk 2
rootSU said:
He probably needs a booting phone first.
But like he said, he's not a noob. He knows all that
Sent from my GT-I9300 using Tapatalk 2
Click to expand...
Click to collapse
Hi all,
I am stuck in the very same problem as of today!
I don't know what to do!
One more weird symptom is that when I tried to charge the Note battery..it suddenly went to bootloop again!
The battery was 100% at the begining of that damn update process!
I don't know what to do..all suggestions are so welcomed.
Iceberg707 said:
Hi all,
I am stuck in the very same problem as of today!
I don't know what to do!
One more weird symptom is that when I tried to charge the Note battery..it suddenly went to bootloop again!
The battery was 100% at the begining of that damn update process!
I don't know what to do..all suggestions are so welcomed.
Click to expand...
Click to collapse
If you have a Note, then advice we give here may not be relevant and may be unsafe.
Related
I'm not noob to flashing or soft brick recovering but this has me confused...
I was running unNamed lastest for a lil while now. Everything was working fine until here recently, while stopped at a rest area checking a webpage my phone cut of and got stuck on a boot loop, only showing the kernal splash screen. Was like wtf? Tried pulling battery ,wiping cache and dalvik. No help. Was like that's fine, have a cwm back up from week ago. Nope didnt work. Was like ok let me try flashing something on my phone that's saved on sd. Flashed Miui, didn't work. Finally got back and tried using this Odin One click "Odin3 One-Click Downloader Stock I-777 UCKH7 with Root no BL" by entropy from the flashing without triggering flash counter guide. Still boot loops only showing the black Samsung Galaxy S II screen. This is after 3 what the odin says as 3 successful flash attempts.
I'm at my wits end, of all the soft bricking i've recovered from, where I assumed as long as a bad bootloader flash didn't happen and i could still get to download mode I'm fine, it could be fixed. But this has me stumped.
*After going into 3e recovery and trying to wipe data, it won't even now go back into 3e recovery. Attempts to but says something like deleting cryption meta data or something of that nature.
-confused-
Nerz said:
I'm not noob to flashing or soft brick recovering but this has me confused...
I was running unNamed lastest for a lil while now. Everything was working fine until here recently, while stopped at a rest area checking a webpage my phone cut of and got stuck on a boot loop, only showing the kernal splash screen. Was like wtf? Tried pulling battery ,wiping cache and dalvik. No help. Was like that's fine, have a cwm back up from week ago. Nope didnt work. Was like ok let me try flashing something on my phone that's saved on sd. Flashed Miui, didn't work. Finally got back and tried using this Odin One click "Odin3 One-Click Downloader Stock I-777 UCKH7 with Root no BL" by entropy from the flashing without triggering flash counter guide. Still boot loops only showing the black Samsung Galaxy S II screen. This is after 3 what the odin says as 3 successful flash attempts.
I'm at my wits end, of all the soft bricking i've recovered from, where I assumed as long as a bad bootloader flash didn't happen and i could still get to download mode I'm fine, it could be fixed. But this has me stumped.
*After going into 3e recovery and trying to wipe data, it won't even now go back into 3e recovery. Attempts to but says something like deleting cryption meta data or something of that nature.
-confused-
Click to expand...
Click to collapse
The one-click downloader is NOT from me, it's a repack of my tar file - and it's starting to sound like the one-click is doing something weird and not flashing the kernel properly.
Use regular old Odin (or Heimdall) to flash the raw tar package.
I'll try it. Though I don't understand how I am in the position I am in from browsing the web on my phone to directly going into a hootloop that neither that odin one click will fix, or any cwm roms won't fix.
Sent from my GT-I9000 using XDA App
I won't have access to computer till later today but I'm trying to figure out what could be wrong. I was thinking that maybe my partitions were bad, but doesn't that odin used, repartition, using a pit file (think that is what pit is for)? Although, this was not from a flash, but rebooted from a couple weeks old successful flash of unNamed while browsing the web so I don't see how that can be the problem. However, even if the partitions were bad, wouldn't odin fail a flash because it has no where to send the firmware files? Also if it was a type of hardware failure, such as processor, wouldn't it not even show the kernel Galaxy S II splash screen? Or is this something that only the gpu handles? It was able to get into cwm before I used the odin though so I can't believe it's cpu because I'm sure that recovery should use it. Just can't figure it out, never had a problem with a boot loop a flash couldn't fix.
If I can't get it to work, will flashing a stock kernel with cwm increment the flash counter? If not I guess I could access my internal sd, try and pull my pictures and the roms off there and then send it to warranty. However I really don't want to. Thanks to anyone in advance.
Sent from my GT-I9000 using XDA App
Nerz said:
I won't have access to computer till later today but I'm trying to figure out what could be wrong. I was thinking that maybe my partitions were bad, but doesn't that odin used, repartition, using a pit file (think that is what pit is for)? Although, this was not from a flash, but rebooted from a couple weeks old successful flash of unNamed while browsing the web so I don't see how that can be the problem. However, even if the partitions were bad, wouldn't odin fail a flash because it has no where to send the firmware files? Also if it was a type of hardware failure, such as processor, wouldn't it not even show the kernel Galaxy S II splash screen? Or is this something that only the gpu handles? It was able to get into cwm before I used the odin though so I can't believe it's cpu because I'm sure that recovery should use it. Just can't figure it out, never had a problem with a boot loop a flash couldn't fix.
If I can't get it to work, will flashing a stock kernel with cwm increment the flash counter? If not I guess I could access my internal sd, try and pull my pictures and the roms off there and then send it to warranty. However I really don't want to. Thanks to anyone in advance.
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
Ok so after flashing the odin file from http://forum.xda-developers.com/showthread.php?t=1286432 it is still bootlooping at splash screen.
I'm not sure what my options are right now. I'm pretty sure bootloaders can't be the problem. I can't re-partition from odin because it says it can't open the specified file "(Line: 1828)". Is this because it doesn't have pit file? I don't understand how this problem manifested.
If I need to pull contents from sd card from cwm, will flashing a cwm kernal increment flash counter?
Don't repartition using a PIT, it's a great way to screw up your phone. (Hopefully you haven't flashed a PIT at all yet... If you have, I don't quite know what's going on.)
Sent from my GT-P7510 using Tapatalk
Entropy512 said:
Don't repartition using a PIT, it's a great way to screw up your phone. (Hopefully you haven't flashed a PIT at all yet... If you have, I don't quite know what's going on.)
Sent from my GT-P7510 using Tapatalk
Click to expand...
Click to collapse
Have yet to flash a pit file.
Sent from my GT-I9000 using XDA App
I'm in the same situation, except with a Sprint GSII. Have you found a fix, yet?
Juq said:
I'm in the same situation, except with a Sprint GSII. Have you found a fix, yet?
Click to expand...
Click to collapse
Hello there from colombia, i have the same thing over here, i`m stuck with a SGS SGH I777 the flash counter says 7 and either flashing CWM 5 or re-uploading stock room wont work, i have no way to buy a jig and it is pretty odd that im in a different country and i can`t send my phone for warranty repair, i`ve read all over and seems like there is no answer for this. Can anyone get rid of the Deleting Crytion Meta data?? this is all i get. ( and eternal boot loop ).
Thanks in advance.
hardgrid said:
Hello there from colombia, i have the same thing over here, i`m stuck with a SGS SGH I777 the flash counter says 7 and either flashing CWM 5 or re-uploading stock room wont work, i have no way to buy a jig and it is pretty odd that im in a different country and i can`t send my phone for warranty repair, i`ve read all over and seems like there is no answer for this. Can anyone get rid of the Deleting Crytion Meta data?? this is all i get. ( and eternal boot loop ).
Thanks in advance.
Click to expand...
Click to collapse
Will try to help, but will need more specific information.
The OP of this thread started bootlooping while checking a web page in his browser. So, how did it happen for you? Please give as much exact information as possible. Was it after a flash? Or did it start while you were using the phone? Or how?
Mine was connected to an aftermarket car charger while it happened. I read a post somewhere and a couple ppl it happened to believed the same thing, since it was in my 30 day trail period I sent it back to Sams club and got my replacement today. Since I didn't have a jig at the time, I didn't want to flash a cwm kernel and increase my flash counter so I lost some pics of my kids.
Not sure if it was charger related but I couldn't find a fix and wouldn't really call myself a noob at flashing. Might have some things to learn nut far from a noob.
Sent from my I897 using XDA App
Hi all, I recently rooted my Verizon galaxy s4 i545vrufng6 4.4.2 and ever since I did I have had some issues. The way I did it was by flashing the ng5 kernel and using towelroot then reflashing ng6. After I did that my wifi was stuck on the dull green light but I read on a forum on how to fix that by going into the system and deleting one of the wifi files. After I did that everything worked fine for a few days! Then I went out of state and when I got on the airplane my phone was put on airplane mode, by the time I landed and took off airplane mode wifi wouldn't work at all. I tried to do the same thing I did earlier but it didn't work. Matter of fact, i cannot even find that file anymore Wifi will no longer even go dull green, i can hit it as many times as I want and it will stay in the off position. I thought if I flashed a custom rom it would restart the wifi, so I looked up how to install cyanogenmod and followed the YouTube vid from wwjoshdew (30minute). I didn't get through the whole thing because when my phone restarted it had an unlocked padlock at the bottom of the Samsung start up logo and when it went into recovery mode it came up with a yellow triangle saying that system software is not authorized by Verizon wireless. I can boot it up normally or I can go into download mode but I can't access recovery mode meaning I cannot do a factory reset. I took it to Verizon and they said they couldn't help me cuz I void the warranty. If anyone could please help me get my phone back to normal I would appreciate it so much! Thank you!
Garrett11 said:
Hi all, I recently rooted my Verizon galaxy s4 i545vrufng6 4.4.2 and ever since I did I have had some issues. The way I did it was by flashing the ng5 kernel and using towelroot then reflashing ng6. After I did that my wifi was stuck on the dull green light but I read on a forum on how to fix that by going into the system and deleting one of the wifi files. After I did that everything worked fine for a few days! Then I went out of state and when I got on the airplane my phone was put on airplane mode, by the time I landed and took off airplane mode wifi wouldn't work at all. I tried to do the same thing I did earlier but it didn't work. Matter of fact, i cannot even find that file anymore Wifi will no longer even go dull green, i can hit it as many times as I want and it will stay in the off position. I thought if I flashed a custom rom it would restart the wifi, so I looked up how to install cyanogenmod and followed the YouTube vid from wwjoshdew (30minute). I didn't get through the whole thing because when my phone restarted it had an unlocked padlock at the bottom of the Samsung start up logo and when it went into recovery mode it came up with a yellow triangle saying that system software is not authorized by Verizon wireless. I can boot it up normally or I can go into download mode but I can't access recovery mode meaning I cannot do a factory reset. I took it to Verizon and they said they couldn't help me cuz I void the warranty. If anyone could please help me get my phone back to normal I would appreciate it so much! Thank you!
Click to expand...
Click to collapse
Sooooo.... you soft bricked your phone by flashing an unsupported ROM on your particular firmware. Cynanogenmod or ANY OTHER pure AOSP Rom is not compatible with firmwares later than MDK. Don't do that again.
You need to flash one of these http://forum.xda-developers.com/showthread.php?t=2735172 in Odin. Instructions are in the thread. You are going to be downgrading back to NC5 (the firmware version before NG6). This may fix your wifi issues as well.
Sent from my SCH-I545
liljoe727 said:
Sooooo.... you soft bricked your phone by flashing an unsupported ROM on your particular firmware. Cynanogenmod or ANY OTHER pure AOSP Rom is not compatible with firmwares later than MDK. Don't do that again.
You need to flash one of these http://forum.xda-developers.com/showthread.php?t=2735172 in Odin. Instructions are in the thread. You are going to be downgrading back to NC5 (the firmware version before NG6). This may fix your wifi issues as well.
Sent from my SCH-I545
Click to expand...
Click to collapse
Thanks so much for the reply. I have downloaded the full wipe and have unzipped it. When i try to put it in Odin it says "md5 error! Binary is invalid" i cannot continue to start the process because of this.
Garrett11 said:
Thanks so much for the reply. I have downloaded the full wipe and have unzipped it. When i try to put it in Odin it says "md5 error! Binary is invalid" i cannot continue to start the process because of this.
Click to expand...
Click to collapse
Download the file zip again and check the md5. You may have a bad download.
Sent from my SCH-I545
liljoe727 said:
Download the file zip again and check the md5. You may have a bad download.
Sent from my SCH-I545
Click to expand...
Click to collapse
Thanks so much for everything. I got it passed in Odin and everything is working this far . One last question, will I be able to root without it messing up again? Id love to have my phone rooted but if it means it wont work while rooted i would rather have it just be able to work regularly
Thanks for everything!
Garrett11 said:
Thanks so much for everything. I got it passed in Odin and everything is working this far . One last question, will I be able to root without it messing up again? Id love to have my phone rooted but if it means it wont work while rooted i would rather have it just be able to work regularly
Thanks for everything!
Click to expand...
Click to collapse
Towelroot.com will work for you as far as root goes as long as you stay on NC5 firmware. Just download the APK, install it and go into the app to "make it rain"...profit.
Sent from my SCH-I545
liljoe727 said:
Towelroot.com will work for you as far as root goes as long as you stay on NC5 firmware. Just download the APK, install it and go into the app to "make it rain"...profit.
Sent from my SCH-I545
Click to expand...
Click to collapse
Awesome. Much thanks man!!!!
Hi, I accidently cleaned the system, data...EVERYTHING really and now I'm having trouble getting an ROM on my GT-P7510 P4wifi. When I turn on the tablet it only gets to the Samsung start screen with a picture of an unlocked lock on the bottom. I am able to boot into CMW recovery and I am able to Odin recoveries like TWRP so I know it is working, but I am unable to Odin an actual ROM. Can someone please give me ideas on how to do this. I am able to Odin different ROMs, Odin says "successful" but when I boot up it goes no further than the Samsung Start Screen with the lock. Thank you for any help.
EDIT: YAHOOO! Got it working. I just had the wrong Stock firmware although many said it was, BUT I downloaded the original from Samsung was a bit hard to locate. I Odin'd and it booted and running 4.0.4. If anyone is having an issue and still able to Odin and would like a copy of this just ask
brie987 said:
EDIT: YAHOOO! Got it working. I just had the wrong Stock firmware although many said it was, BUT I downloaded the original from Samsung was a bit hard to locate. I Odin'd and it booted and running 4.0.4. If anyone is having an issue and still able to Odin and would like a copy of this just ask
Click to expand...
Click to collapse
I did exactly the same thing. And I am having a lot of trouble finding the REAL factory recovery image for Odin. Where did you find it? All I am finding is malware...
Thanks
precisionpete said:
I did exactly the same thing. And I am having a lot of trouble finding the REAL factory recovery image for Odin. Where did you find it? All I am finding is malware...
Thanks
Click to expand...
Click to collapse
PM me and I will send to you.
So I just installed the 0.2.3 cm 12 beta rom on and since I was giving my galaxy light to a friend I decided to do a factory reset so when I did that the phone rebooted and now its stuck at the twrp recovery splashscreen. I've already tried rebooting and re-flashing twrp but no luck. Could it be a cache problem or something? Thanks to all in advance who reply.
Koohara947 said:
So I just installed the 0.2.3 cm 12 beta rom on and since I was giving my galaxy light to a friend I decided to do a factory reset so when I did that the phone rebooted and now its stuck at the twrp recovery splashscreen. I've already tried rebooting and re-flashing twrp but no luck. Could it be a cache problem or something? Thanks to all in advance who reply.
Click to expand...
Click to collapse
Im guessing you wiped device and if you go into recovery and try to reboot system it will tell you no os installed if that is the case you can plug device into computer and still use twrp as file manager thats if you had a backup stored on desktop or drag a CM zip to device .
other method of course would be to enter download mode and use odin to flash stock firmware for your device not sure if you have t399 or the N varient lastest beening OH2/OH3 you can find that in my filehost i have stock odin zips to flash.
Koohara947 said:
So I just installed the 0.2.3 cm 12 beta rom on and since I was giving my galaxy light to a friend I decided to do a factory reset so when I did that the phone rebooted and now its stuck at the twrp recovery splashscreen. I've already tried rebooting and re-flashing twrp but no luck. Could it be a cache problem or something? Thanks to all in advance who reply.
Click to expand...
Click to collapse
Im more than sure that I can help you fix it. Metro or tmobile? Kernal? Any previous roms installed? You didnt delete your os but odin will work ill give you a working version and instructions but what version?
_PAG_ said:
Im more than sure that I can help you fix it. Metro or tmobile? Kernal? Any previous roms installed? You didnt delete your os but odin will work ill give you a working version and instructions but what version?
Click to expand...
Click to collapse
Thank you for your response I have already fixed it by installing the stock rom and recovery then rooting it again. Thank you for your help though
Koohara947 said:
Thank you for your response I have already fixed it by installing the stock rom and recovery then rooting it again. Thank you for your help though
Click to expand...
Click to collapse
Which stock rom did you use?
_PAG_ said:
Which stock rom did you use?
Click to expand...
Click to collapse
I used the download from this guide by ShabbyPenguin: http://androidforums.com/threads/guide-restore-your-galaxy-light-to-stock-mja.846767/
Hey guys...I did the same thing but my t399 must have lost battery charge because when I picked it back up, it was dead...I plugged in and it started flashing the Samsung screen slowly at me. It would not reboot. I did get download and twrp to show up and start to atleast work enough to flash and Odin again...I used Shabby's kernel source and it is still doing the same thing after flashing through Odin. Still stuck on Samsung screen slowly flashing and recovery shows no operating system. I'm about to put it back in a drawer but I feel it's so close that I had to ask for help. I flashed shabby work to root and recovery. I flashed twrp 2.7 and the cm12 beta rom. Then back to shabby guide to get it to recognize, it did..kind of..but still boot looped. Flashed 3 times... No changes. Can anyone help or is it time for a staircase? hA!
Oh yes .. I don't think the battery is bad.. I checked it with a meter and it reads voltage. It does get pretty hot while I'm working on it though and my pc shows its charged at 100% but the phone doesn't show that...it stays in like dead mode. Nit recognizing again. Anybody have suggestions? In recovery it also indicated it can not locate most of my files in read after I flash.. what am I doing wrong.
sgh-399n bootloop
It's taken me 2 months to cry for help. I'm not a complete noobie, but I'm completely exhausted. First of all, one morning I woke up and I thought that somehow my battery was dead. It wasn't. Eventually, I found it in a bootloop. This phone was working fine, running a "Tiger_Lilly" ROM the night before. I've tried everything using Odin, adb and fastboot (I'm not sure how to get the phone in fastboot mode and also, before using Odin, TWRP wouldn't mount/data.) I'm stumped. Would appreciate some help, thank you.
HELP...!!!
_PAG_ said:
Im more than sure that I can help you fix it. Metro or tmobile? Kernal? Any previous roms installed? You didnt delete your os but odin will work ill give you a working version and instructions but what version?
Click to expand...
Click to collapse
Hi there sr, i am stuck in a bootloop with the metro-pcs model SGH-t399N ive already tray usin odin and the stock rom, the only way a geit to go into the pone is download mode, and after usin odin the phone is still in a bootloop, can you help me with that?
Fidelacho16 said:
Hi there sr, i am stuck in a bootloop with the metro-pcs model SGH-t399N ive already tray usin odin and the stock rom, the only way a geit to go into the pone is download mode, and after usin odin the phone is still in a bootloop, can you help me with that?
Click to expand...
Click to collapse
What was you using prior to it bootlooping and what rom was installed have you modifed anything else such as partions etc...
also list your method and link rom your trying. just wondering if its the lastest version for device. while in odin also make sure Auto Reboot” and “F. Reset Time is only selected and what version of odin are you using?
If your unable to flash any rom thru odin then there must be a major problem else where until we can narrow it down no one can assist you.
hi good morning, i actually dont know the prior version of the SW, i am using the available version on sammobile of the sw and i am trying odin to flash, ive already used odin 3.8 and 3.9 and the one that said it is configured to this phone in the thread.
Fidelacho16 said:
hi good morning, i actually dont know the prior version of the SW, i am using the available version on sammobile of the sw and i am trying odin to flash, ive already used odin 3.8 and 3.9 and the one that said it is configured to this phone in the thread.
Click to expand...
Click to collapse
Ok try this version of odin 3.0.7 which i added as attachment also i linked my firmware OH3 as you stated your device is t399n i know sammobile takes long to download so this may be faster for you Link HERE
as stated previously make sure only thing selected is Auto Reboot” and “F. Reset Time and add tar file into PDA.
I await your reply if fails i send you adb fastboot etc may be able to grab some logs see whats happening
im using cm12 archidroid 3.5.14 and decided to update to 3.5.15 version last night. but the update didnt went well, something went wrong and i got 'recursive' error, and it started to boot loops.
i tried so many solutions, i odin this and that and nothing worked. i downloaded cwm 6.0.0.47 i think, and managed to install the AD rom, but now im stuck at languange selection, i cant select anything because screen support isnt working
what do i do now?
Samsung S3 i9300
You did "odin this and that"? That's never a good idea. Just saying...
I would try to flash latest AD again but with a proper up-to-date recovery e.g. latest TWRP after making a nandroid backup.
Hawaiihemd said:
You did "odin this and that"? That's never a good idea. Just saying...
I would try to flash latest AD again but with a proper up-to-date recovery e.g. latest TWRP after making a nandroid backup.
Click to expand...
Click to collapse
thanks for the reply Hawaiihemd
i downloaded the stock firmware of i9300 and odin that .tar.md5. Now it just stuck at samsung logo
I would try to flash latest AD again but with a proper up-to-date recovery
Click to expand...
Click to collapse
how do i do that? where do i get latest uptodate recovery? at least point me to right directions thanks so much
ricvai7 said:
thanks for the reply Hawaiihemd
i downloaded the stock firmware of i9300 and odin that .tar.md5. Now it just stuck at samsung logo
how do i do that? where do i get latest uptodate recovery? at least point me to right directions thanks so much
Click to expand...
Click to collapse
Well then, if you already flashed stock rom via odin, your data is already gone. Make sure your phone is working on stock first now. Please be aware that the first boot after each rom flash might take up to 15 min or so because the cache has to be built at first boot!
You can find the link to TWRP recovery in my signature (see My Gadgets). I suggest your read the tutorials that are linked there also for more information.
thanks again, glad to hear there's still hope. i will do as you advised.
So, in order to get stock firmware flashed and running, can i use twrp-2.8.6.1-i9300.tar from your signature?
1st i odin the twrp-2.8.6.1-i9300.tar, and then reboot into download mode, and odin firmware stock?
in that order? i havent done this in a long time, i've been using AD for so long without any problem, i dont really exactly remember how. i just concern about the touch screen not functioning, i really hope no hardware failures. i never experience anything like this, even in recovery mode, the touch screen doesnt work, i had to flash entire process using up/down and power button
right now i havent done anything since the last attempt ( flashed stock rom, and stuck at samsung logo )
currently., im charging the battery, will try get it up and running after the battery is full
thanks mate
ricvai7 said:
thanks again, glad to hear there's still hope. i will do as you advised.
So, in order to get stock firmware flashed and running, can i use twrp-2.8.6.1-i9300.tar from your signature?
1st i odin the twrp-2.8.6.1-i9300.tar, and then reboot into download mode, and odin firmware stock?
in that order? i havent done this in a long time, i've been using AD for so long without any problem, i dont really exactly remember how. i just concern about the touch screen not functioning, i really hope no hardware failures. i never experience anything like this, even in recovery mode, the touch screen doesnt work, i had to flash entire process using up/down and power button
right now i havent done anything since the last attempt ( flashed stock rom, and stuck at samsung logo )
currently., im charging the battery, will try get it up and running after the battery is full
thanks mate
Click to expand...
Click to collapse
i've managed to odin stock rom. everything is ok now
the problem remain is no touch screen. how can i fix it?
FYI i sent my phone to replaced the screen 4-5 days ago , but everything was ok, no problem until i failed flashed rom it started to lose touch screen. how can i fix this?
thanks !
ricvai7 said:
i've managed to odin stock rom. everything is ok now
the problem remain is no touch screen. how can i fix it?
FYI i sent my phone to replaced the screen 4-5 days ago , but everything was ok, no problem until i failed flashed rom it started to lose touch screen. how can i fix this?
thanks !
Click to expand...
Click to collapse
i havent solved the problem with touch screen. can anybody help?