Related
I'm not noob to flashing or soft brick recovering but this has me confused...
I was running unNamed lastest for a lil while now. Everything was working fine until here recently, while stopped at a rest area checking a webpage my phone cut of and got stuck on a boot loop, only showing the kernal splash screen. Was like wtf? Tried pulling battery ,wiping cache and dalvik. No help. Was like that's fine, have a cwm back up from week ago. Nope didnt work. Was like ok let me try flashing something on my phone that's saved on sd. Flashed Miui, didn't work. Finally got back and tried using this Odin One click "Odin3 One-Click Downloader Stock I-777 UCKH7 with Root no BL" by entropy from the flashing without triggering flash counter guide. Still boot loops only showing the black Samsung Galaxy S II screen. This is after 3 what the odin says as 3 successful flash attempts.
I'm at my wits end, of all the soft bricking i've recovered from, where I assumed as long as a bad bootloader flash didn't happen and i could still get to download mode I'm fine, it could be fixed. But this has me stumped.
*After going into 3e recovery and trying to wipe data, it won't even now go back into 3e recovery. Attempts to but says something like deleting cryption meta data or something of that nature.
-confused-
Nerz said:
I'm not noob to flashing or soft brick recovering but this has me confused...
I was running unNamed lastest for a lil while now. Everything was working fine until here recently, while stopped at a rest area checking a webpage my phone cut of and got stuck on a boot loop, only showing the kernal splash screen. Was like wtf? Tried pulling battery ,wiping cache and dalvik. No help. Was like that's fine, have a cwm back up from week ago. Nope didnt work. Was like ok let me try flashing something on my phone that's saved on sd. Flashed Miui, didn't work. Finally got back and tried using this Odin One click "Odin3 One-Click Downloader Stock I-777 UCKH7 with Root no BL" by entropy from the flashing without triggering flash counter guide. Still boot loops only showing the black Samsung Galaxy S II screen. This is after 3 what the odin says as 3 successful flash attempts.
I'm at my wits end, of all the soft bricking i've recovered from, where I assumed as long as a bad bootloader flash didn't happen and i could still get to download mode I'm fine, it could be fixed. But this has me stumped.
*After going into 3e recovery and trying to wipe data, it won't even now go back into 3e recovery. Attempts to but says something like deleting cryption meta data or something of that nature.
-confused-
Click to expand...
Click to collapse
The one-click downloader is NOT from me, it's a repack of my tar file - and it's starting to sound like the one-click is doing something weird and not flashing the kernel properly.
Use regular old Odin (or Heimdall) to flash the raw tar package.
I'll try it. Though I don't understand how I am in the position I am in from browsing the web on my phone to directly going into a hootloop that neither that odin one click will fix, or any cwm roms won't fix.
Sent from my GT-I9000 using XDA App
I won't have access to computer till later today but I'm trying to figure out what could be wrong. I was thinking that maybe my partitions were bad, but doesn't that odin used, repartition, using a pit file (think that is what pit is for)? Although, this was not from a flash, but rebooted from a couple weeks old successful flash of unNamed while browsing the web so I don't see how that can be the problem. However, even if the partitions were bad, wouldn't odin fail a flash because it has no where to send the firmware files? Also if it was a type of hardware failure, such as processor, wouldn't it not even show the kernel Galaxy S II splash screen? Or is this something that only the gpu handles? It was able to get into cwm before I used the odin though so I can't believe it's cpu because I'm sure that recovery should use it. Just can't figure it out, never had a problem with a boot loop a flash couldn't fix.
If I can't get it to work, will flashing a stock kernel with cwm increment the flash counter? If not I guess I could access my internal sd, try and pull my pictures and the roms off there and then send it to warranty. However I really don't want to. Thanks to anyone in advance.
Sent from my GT-I9000 using XDA App
Nerz said:
I won't have access to computer till later today but I'm trying to figure out what could be wrong. I was thinking that maybe my partitions were bad, but doesn't that odin used, repartition, using a pit file (think that is what pit is for)? Although, this was not from a flash, but rebooted from a couple weeks old successful flash of unNamed while browsing the web so I don't see how that can be the problem. However, even if the partitions were bad, wouldn't odin fail a flash because it has no where to send the firmware files? Also if it was a type of hardware failure, such as processor, wouldn't it not even show the kernel Galaxy S II splash screen? Or is this something that only the gpu handles? It was able to get into cwm before I used the odin though so I can't believe it's cpu because I'm sure that recovery should use it. Just can't figure it out, never had a problem with a boot loop a flash couldn't fix.
If I can't get it to work, will flashing a stock kernel with cwm increment the flash counter? If not I guess I could access my internal sd, try and pull my pictures and the roms off there and then send it to warranty. However I really don't want to. Thanks to anyone in advance.
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
Ok so after flashing the odin file from http://forum.xda-developers.com/showthread.php?t=1286432 it is still bootlooping at splash screen.
I'm not sure what my options are right now. I'm pretty sure bootloaders can't be the problem. I can't re-partition from odin because it says it can't open the specified file "(Line: 1828)". Is this because it doesn't have pit file? I don't understand how this problem manifested.
If I need to pull contents from sd card from cwm, will flashing a cwm kernal increment flash counter?
Don't repartition using a PIT, it's a great way to screw up your phone. (Hopefully you haven't flashed a PIT at all yet... If you have, I don't quite know what's going on.)
Sent from my GT-P7510 using Tapatalk
Entropy512 said:
Don't repartition using a PIT, it's a great way to screw up your phone. (Hopefully you haven't flashed a PIT at all yet... If you have, I don't quite know what's going on.)
Sent from my GT-P7510 using Tapatalk
Click to expand...
Click to collapse
Have yet to flash a pit file.
Sent from my GT-I9000 using XDA App
I'm in the same situation, except with a Sprint GSII. Have you found a fix, yet?
Juq said:
I'm in the same situation, except with a Sprint GSII. Have you found a fix, yet?
Click to expand...
Click to collapse
Hello there from colombia, i have the same thing over here, i`m stuck with a SGS SGH I777 the flash counter says 7 and either flashing CWM 5 or re-uploading stock room wont work, i have no way to buy a jig and it is pretty odd that im in a different country and i can`t send my phone for warranty repair, i`ve read all over and seems like there is no answer for this. Can anyone get rid of the Deleting Crytion Meta data?? this is all i get. ( and eternal boot loop ).
Thanks in advance.
hardgrid said:
Hello there from colombia, i have the same thing over here, i`m stuck with a SGS SGH I777 the flash counter says 7 and either flashing CWM 5 or re-uploading stock room wont work, i have no way to buy a jig and it is pretty odd that im in a different country and i can`t send my phone for warranty repair, i`ve read all over and seems like there is no answer for this. Can anyone get rid of the Deleting Crytion Meta data?? this is all i get. ( and eternal boot loop ).
Thanks in advance.
Click to expand...
Click to collapse
Will try to help, but will need more specific information.
The OP of this thread started bootlooping while checking a web page in his browser. So, how did it happen for you? Please give as much exact information as possible. Was it after a flash? Or did it start while you were using the phone? Or how?
Mine was connected to an aftermarket car charger while it happened. I read a post somewhere and a couple ppl it happened to believed the same thing, since it was in my 30 day trail period I sent it back to Sams club and got my replacement today. Since I didn't have a jig at the time, I didn't want to flash a cwm kernel and increase my flash counter so I lost some pics of my kids.
Not sure if it was charger related but I couldn't find a fix and wouldn't really call myself a noob at flashing. Might have some things to learn nut far from a noob.
Sent from my I897 using XDA App
Not sure what the CM updater uses, but I have tried to update with Philz, got stuck in an installation loop of the update itself.
Tried to use my jig and flash back to stock right now, got into download mode and was able to flash back to stock, but right now, I got into download with the jig, flashed stock ROM, and got a bootloop but am UNABLE to get into any recovery at all.
Pretty screwed up. Really need some suggestions here, guys.
Any ideas?!
I can get into download mode and flash via Odin (USB drivers installed via Windows 8)
Flashes successfully, installs stock recovery, reboots into bootloop.
No idea how to fix it.
Not a noob here. Nothing is working.
Any suggestions would be greatly appreciated.
I had the same problem and I ended up finding a working CWM tar file that can be installed using ODIN and I was then able to boot into CWM fine.
This is the exact file name: recovery-cwmtouch-6.0.2.7-GTI9300
I don't remember where I downloaded it from, but if you Google the exact file name I am pretty sure you'll find it. Just flash it using Odin and you'll be good to go.
TarekElsakka said:
I had the same problem and I ended up finding a working CWM tar file that can be installed using ODIN and I was then able to boot into CWM fine.
This is the exact file name: recovery-cwmtouch-6.0.2.7-GTI9300
I don't remember where I downloaded it from, but if you Google the exact file name I am pretty sure you'll find it. Just flash it using Odin and you'll be good to go.
Click to expand...
Click to collapse
Well, now I'm even more f****ed than before, because I had a zero count, but after trying this, I got a custom count in download, and I still cannot get into recovery.
Nothing works.
Bye, bye warranty.
Edit:
The 6.0.2.7 version by MSKIP worked, but the updated one did not.
I got recovery, now I'll see if I can flash stock and recovery to get my counter back to zero.
Sorry to hear about the counter. I'd suggest rooting your device, installing Triangle Away, resetting your flash counter and then finally unrooting your device by installing stock ROM from SamMobile or such. That's the best route if you want your warranty to remain intact.
TarekElsakka said:
Sorry to hear about the counter. I'd suggest rooting your device, installing Triangle Away, resetting your flash counter and then finally unrooting your device by installing stock ROM from SamMobile or such. That's the best route if you want your warranty to remain intact.
Click to expand...
Click to collapse
He probably needs a booting phone first.
But like he said, he's not a noob. He knows all that
Sent from my GT-I9300 using Tapatalk 2
rootSU said:
He probably needs a booting phone first.
But like he said, he's not a noob. He knows all that
Sent from my GT-I9300 using Tapatalk 2
Click to expand...
Click to collapse
Hi all,
I am stuck in the very same problem as of today!
I don't know what to do!
One more weird symptom is that when I tried to charge the Note battery..it suddenly went to bootloop again!
The battery was 100% at the begining of that damn update process!
I don't know what to do..all suggestions are so welcomed.
Iceberg707 said:
Hi all,
I am stuck in the very same problem as of today!
I don't know what to do!
One more weird symptom is that when I tried to charge the Note battery..it suddenly went to bootloop again!
The battery was 100% at the begining of that damn update process!
I don't know what to do..all suggestions are so welcomed.
Click to expand...
Click to collapse
If you have a Note, then advice we give here may not be relevant and may be unsafe.
I've searched the forums and haven't found a solution to my problem. I have rooted S4 MK2 and wanted to put Gummy ROM on it, only finding out after I had installed TWRP that this wouldn't be possible. No big deal, but now, I can't get away from the stupid downloading screen for TWRP. No longer do I get the screen before it warning about tinkering with your operating system, and once it's stuck on the screen, getting the phone to boot properly sometimes takes a while, and a lot of foul language. I've tried several things to bypass/delete/overwrite TWRP, to no avail. ODIN doesn't work for me, tried several versions, ROM Manager and CWM doesn't work, when I try to boot into CWM mode it goes to downloading screen of TWRP. I finally gave up, decided to nuke it from space and do a factory reset... which took me straight to the damnedable downloading screen! This tells me I will probably be unable to update or use any ASOP ROMs that I might run into, because once on the downloading screen, nothing works, the phone isn't recognized by my computer, two different versions of ODIN failed to get its attention, unable to to load .pit or .tar files... I'm at wits end folks, and haven't found a solution in any other threads on xda, or the net in general, any help and suggestions would be much appreciated. I've not used ADB before, but if need be, I'll learn if there's a fix going that route.
roshane said:
I've searched the forums and haven't found a solution to my problem. I have rooted S4 MK2 and wanted to put Gummy ROM on it, only finding out after I had installed TWRP that this wouldn't be possible. No big deal, but now, I can't get away from the stupid downloading screen for TWRP. No longer do I get the screen before it warning about tinkering with your operating system, and once it's stuck on the screen, getting the phone to boot properly sometimes takes a while, and a lot of foul language. I've tried several things to bypass/delete/overwrite TWRP, to no avail. ODIN doesn't work for me, tried several versions, ROM Manager and CWM doesn't work, when I try to boot into CWM mode it goes to downloading screen of TWRP. I finally gave up, decided to nuke it from space and do a factory reset... which took me straight to the damnedable downloading screen! This tells me I will probably be unable to update or use any ASOP ROMs that I might run into, because once on the downloading screen, nothing works, the phone isn't recognized by my computer, two different versions of ODIN failed to get its attention, unable to to load .pit or .tar files... I'm at wits end folks, and haven't found a solution in any other threads on xda, or the net in general, any help and suggestions would be much appreciated. I've not used ADB before, but if need be, I'll learn if there's a fix going that route.
Click to expand...
Click to collapse
Does Odin "see" your phone? If so, what build are you trying to install?
I know the damage is done, but a little reading before hand would have let you know that with MK2 you can't install a custom recovery. Only Safestrap works with compatible Touchwiz 4.3 Roms
Edit: Maybe this thread will help. http://forum.xda-developers.com/showthread.php?t=2578209
Edit #2: My apologies. Just re-read your post and I see you said, more than once, that Odin isn't seeing your phone. I'm afraid I won't be any help. Good luck.
Odin sees the phone, but fails at all attempts to install anything. .pit, .tar etc. I originally wanted to install Gummy but now I know that won't ever work, then I just tried to install stock .tar file and it also fails.
roshane said:
I've searched the forums and haven't found a solution to my problem. I have rooted S4 MK2 and wanted to put Gummy ROM on it, only finding out after I had installed TWRP that this wouldn't be possible. No big deal, but now, I can't get away from the stupid downloading screen for TWRP. No longer do I get the screen before it warning about tinkering with your operating system, and once it's stuck on the screen, getting the phone to boot properly sometimes takes a while, and a lot of foul language. I've tried several things to bypass/delete/overwrite TWRP, to no avail. ODIN doesn't work for me, tried several versions, ROM Manager and CWM doesn't work, when I try to boot into CWM mode it goes to downloading screen of TWRP. I finally gave up, decided to nuke it from space and do a factory reset... which took me straight to the damnedable downloading screen! This tells me I will probably be unable to update or use any ASOP ROMs that I might run into, because once on the downloading screen, nothing works, the phone isn't recognized by my computer, two different versions of ODIN failed to get its attention, unable to to load .pit or .tar files... I'm at wits end folks, and haven't found a solution in any other threads on xda, or the net in general, any help and suggestions would be much appreciated. I've not used ADB before, but if need be, I'll learn if there's a fix going that route.
Click to expand...
Click to collapse
If you had taken 5 minutes of time to research...you wouldn't have bricked your phone...Countless threads on this very thing.
Sent from my SCH-I545 using XDA Premium 4 mobile app
roshane said:
Odin sees the phone, but fails at all attempts to install anything. .pit, .tar etc. I originally wanted to install Gummy but now I know that won't ever work, then I just tried to install stock .tar file and it also fails.
Click to expand...
Click to collapse
What exactly are you trying to install with Odin?
no bricking, just, let's say a small pebble.
riker147 said:
What exactly are you trying to install with Odin?
Click to expand...
Click to collapse
My most recent attempt was SCH-I545.pit, didn't work... I also tried Philz_Touch, gummy, and one other ROM which, of course didn't work, now I know why the roms didn't, but no sure why the .pit file won't work. All I really want to do now is remove all traces of TWRP. My phone isn't bricked, totally usable, it just won't be able to be updated or customized until I get rid of TWRP
roshane said:
My most recent attempt was SCH-I545.pit, didn't work... I also tried Philz_Touch, gummy, and one other ROM which, of course didn't work, now I know why the roms didn't, but no sure why the .pit file won't work. All I really want to do now is remove all traces of TWRP. My phone isn't bricked, totally usable, it just won't be able to be updated or customized until I get rid of TWRP
Click to expand...
Click to collapse
It looks to me like your only option is to Odin back to stock MK2. Did you check out the link I gave you in my first post?
riker147 said:
It looks to me like your only option is to Odin back to stock MK2. Did you check out the link I gave you in my first post?
Click to expand...
Click to collapse
I'm reading over it now, considering doing the full wipe. Now that I know custom ROMS are going to be limited to ASOP I don't mind going stock and unrooted. I really appreciate your help
roshane said:
I'm reading over it now, considering doing the full wipe. Now that I know custom ROMS are going to be limited to ASOP I don't mind going stock and unrooted. I really appreciate your help
Click to expand...
Click to collapse
If you get it straightened out I would recommend reading this thread after. http://forum.xda-developers.com/showthread.php?t=2606501
Let me know how you make out. Good luck.
From reading this I think you're confusing TWRP with Odin. TWRP doesnt have a downloading screen, but Odin does and thats exactly the screen you want to be on to flash a stock Odin tar. You will need to flash a full stock tar. And if you respond saying it didnt work please include the Odin error log.
Sent from my SCH-I545 using XDA Premium 4 mobile app
riker147 said:
If you get it straightened out I would recommend reading this thread after. http://forum.xda-developers.com/showthread.php?t=2606501
Let me know how you make out. Good luck.
Click to expand...
Click to collapse
no luck so far, got the full wipe downloaded, put everything into Odin, and in the Odin message box it says setupconnection.. not real sure what to do...
roshane said:
no luck so far, got the full wipe downloaded, put everything into Odin, and in the Odin message box it says setupconnection.. not real sure what to do...
Click to expand...
Click to collapse
You making sure you have the proper USB drivers as well as a good USB cable?
Also like surge said its kind of confusing I think you're confusing Odin with twrp as well at times.
So now your trying to load which file from within Odin???
Sent from my SCH-I545 using Tapatalk
Mistertac said:
You making sure you have the proper USB drivers as well as a good USB cable?
Also like surge said its kind of confusing I think you're confusing Odin with twrp as well at times.
So now your trying to load which file from within Odin???
Sent from my SCH-I545 using Tapatalk
Click to expand...
Click to collapse
Got everything working, I'm all stock and all systems are go. Thank you very much for your kind help. I'm going to now patiently wait for the official 4.4 update to arrive and otherwise leave my phone stock.
Hey all,
I was trying to revert my ATT i717 edition back to stock when I mistakenly installed a kernel as a boot loader via ODIN..dont ask dumb mistake on my part...Now my Note shows the Samsung logo, goes black, shows a different Samsung logo and doesn't go any further. I can boot to recovery mode and ODIN mode but that's it. I think all I need is a stock boot loader and everything will be OK. I have no problem wiping this thing completely as theres nothing I want to save on it. I haven't been able to find a working stock boot loader anywhere that I could use ODIN to install. Any help would be great. If I can't find a homegrown solution, I may just end up shipping this off to the mobiletechvideos crew, but would rather save some money if I can. Thanks in advance.
-Geoff
Since everyone else is viewing and not responding, have you tried this:
http://forum.xda-developers.com/showthread.php?t=1506330
Btw, it doesn't sound like it hard bricked it if it's still going into recovery. Just Odin the stock kernel, system, and recovery and it see what happens.
Sloogle_Flugelmann said:
Since everyone else is viewing and not responding, have you tried this:
http://forum.xda-developers.com/showthread.php?t=1506330
Btw, it doesn't sound like it hard bricked it if it's still going into recovery. Just Odin the stock kernel, system, and recovery and it see what happens.
Click to expand...
Click to collapse
Thanks for the advice! I had found that thread earlier, however none of the links work, nor have they been reposted. If anyone here has them in some dark region of their hard drive, I'd love to have a working link.
Thanks.
-Geoff
I also found this:
http://forum.xda-developers.com/showpost.php?p=27869730&postcount=1
Sloogle_Flugelmann said:
I also found this:
http://forum.xda-developers.com/showpost.php?p=27869730&postcount=1
Click to expand...
Click to collapse
Thank you so much! I was able to get it restored back to default and working again!
im using cm12 archidroid 3.5.14 and decided to update to 3.5.15 version last night. but the update didnt went well, something went wrong and i got 'recursive' error, and it started to boot loops.
i tried so many solutions, i odin this and that and nothing worked. i downloaded cwm 6.0.0.47 i think, and managed to install the AD rom, but now im stuck at languange selection, i cant select anything because screen support isnt working
what do i do now?
Samsung S3 i9300
You did "odin this and that"? That's never a good idea. Just saying...
I would try to flash latest AD again but with a proper up-to-date recovery e.g. latest TWRP after making a nandroid backup.
Hawaiihemd said:
You did "odin this and that"? That's never a good idea. Just saying...
I would try to flash latest AD again but with a proper up-to-date recovery e.g. latest TWRP after making a nandroid backup.
Click to expand...
Click to collapse
thanks for the reply Hawaiihemd
i downloaded the stock firmware of i9300 and odin that .tar.md5. Now it just stuck at samsung logo
I would try to flash latest AD again but with a proper up-to-date recovery
Click to expand...
Click to collapse
how do i do that? where do i get latest uptodate recovery? at least point me to right directions thanks so much
ricvai7 said:
thanks for the reply Hawaiihemd
i downloaded the stock firmware of i9300 and odin that .tar.md5. Now it just stuck at samsung logo
how do i do that? where do i get latest uptodate recovery? at least point me to right directions thanks so much
Click to expand...
Click to collapse
Well then, if you already flashed stock rom via odin, your data is already gone. Make sure your phone is working on stock first now. Please be aware that the first boot after each rom flash might take up to 15 min or so because the cache has to be built at first boot!
You can find the link to TWRP recovery in my signature (see My Gadgets). I suggest your read the tutorials that are linked there also for more information.
thanks again, glad to hear there's still hope. i will do as you advised.
So, in order to get stock firmware flashed and running, can i use twrp-2.8.6.1-i9300.tar from your signature?
1st i odin the twrp-2.8.6.1-i9300.tar, and then reboot into download mode, and odin firmware stock?
in that order? i havent done this in a long time, i've been using AD for so long without any problem, i dont really exactly remember how. i just concern about the touch screen not functioning, i really hope no hardware failures. i never experience anything like this, even in recovery mode, the touch screen doesnt work, i had to flash entire process using up/down and power button
right now i havent done anything since the last attempt ( flashed stock rom, and stuck at samsung logo )
currently., im charging the battery, will try get it up and running after the battery is full
thanks mate
ricvai7 said:
thanks again, glad to hear there's still hope. i will do as you advised.
So, in order to get stock firmware flashed and running, can i use twrp-2.8.6.1-i9300.tar from your signature?
1st i odin the twrp-2.8.6.1-i9300.tar, and then reboot into download mode, and odin firmware stock?
in that order? i havent done this in a long time, i've been using AD for so long without any problem, i dont really exactly remember how. i just concern about the touch screen not functioning, i really hope no hardware failures. i never experience anything like this, even in recovery mode, the touch screen doesnt work, i had to flash entire process using up/down and power button
right now i havent done anything since the last attempt ( flashed stock rom, and stuck at samsung logo )
currently., im charging the battery, will try get it up and running after the battery is full
thanks mate
Click to expand...
Click to collapse
i've managed to odin stock rom. everything is ok now
the problem remain is no touch screen. how can i fix it?
FYI i sent my phone to replaced the screen 4-5 days ago , but everything was ok, no problem until i failed flashed rom it started to lose touch screen. how can i fix this?
thanks !
ricvai7 said:
i've managed to odin stock rom. everything is ok now
the problem remain is no touch screen. how can i fix it?
FYI i sent my phone to replaced the screen 4-5 days ago , but everything was ok, no problem until i failed flashed rom it started to lose touch screen. how can i fix this?
thanks !
Click to expand...
Click to collapse
i havent solved the problem with touch screen. can anybody help?