ok guys
am having isues dual booting
installed syrah kernel fine and used STweaks to set up 2nd rom
am using a cyanogenmod 10.1 version as my 2nd rom
but it just boots into the cyanogen spinning logo - and goes no further!?
is the 4.2.1 not compatable?
thanks guys in advance
I'm not sure
After install 2nd rom you have to flash siyah kernel is it OK this part?
Sent from my GT-I9300 using Tapatalk 2
yep reflashed the kernel
You will need to find out what Siyah kernel you are running as not all support dual boot.The latest version s3-v1.8.8 is meant to work with dual boot and has cm10.1 support.Check it out and download from here.
http://www.gokhanmoral.com/
Dont forget that after installing the second ROM you will have to re-install Siyah cos the secondary ROM probably wont have the correct kernel.Also a 4.2.1 ROM may need a different Siyah version than a 4.1.2 or a 4.1.1 ROM and this could also be the problem if you have 2 different firmwares running.
When on dual boot you have one kernel controling both.
ok that makes sense
have siyah version s3-v1.8.8 already running
reinstalled siyah after 2nd rom installation
still a no go
thought the siyah kernel was 'one kernel to rule them all'.......
or so it says.........
Largewoodenspoon said:
ok that makes sense
have siyah version s3-v1.8.8 already running
reinstalled siyah after 2nd rom installation
still a no go
thought the siyah kernel was 'one kernel to rule them all'.......
or so it says.........
Click to expand...
Click to collapse
If I remember from when I dual booted a second ROM I had to full wipe install it.I imagine that you did but you could try and pass your primary ROM to secondary and full wipe install the new one.Then just swap them over again so the full wipe primary goes to secondary and the one you passed to secondary will come back as your main ROM.....if you get what I mean.Kind of a wierd explanation:silly:
The boot problen is definitly to me a kernel issue anyway.
yeah - will do the clone/swap thing!
by the way
are you part of the omega team?
Largewoodenspoon said:
ok that makes sense
thought the siyah kernel was 'one kernel to rule them all'.......
or so it says.........
Click to expand...
Click to collapse
Its called blowing your own trumpet .
jje
Largewoodenspoon said:
yeah - will do the clone/swap thing!
by the way
are you part of the omega team?
Click to expand...
Click to collapse
Yeah mate,thats what the banner says
so sorry dude
didnt realize I was speaking to royalty!
have flashed over latest omega - keep up the good work!!!!!
excellent - simply excellent
am humbled......
When you come up with a noob question number 6, can you make an informative thread title at least?
thanks glebun
its hard being a noob
like i said in previous posts - come from ios 6.1 beta3 on iphone
am enjoying android sooooooo much better - but just learning
dabble in xbox360 devkit and ps3 dev as well as ipad/iphone/ipod stuff
not stupid - just new to this area
thanks for your input - will make noob question number 6 AMAZING.......lol
HA HA!!! Royalty. .
Thanks for making me feel loved
Just about to release v38 and is gonna be a good one too so you might want to flash it.
Largewoodenspoon said:
thanks glebun
its hard being a noob
like i said in previous posts - come from ios 6.1 beta3 on iphone
am enjoying android sooooooo much better - but just learning
dabble in xbox360 devkit and ps3 dev as well as ipad/iphone/ipod stuff
not stupid - just new to this area
Basics Faqs and Guides .
http://forum.xda-developers.com/showthread.php?t=1927113
jje
Click to expand...
Click to collapse
Related
Hey guys,
I want to flash a kernel over my custom rom should I just flash it with cwm?
Is it going to brick my phone?
Please help
xReal said:
Hey guys,
I want to flash a kernel over my custom rom should I just flash it with cwm?
Follow the instructions flash is either via Odin or CWM .
Is it going to brick my phone?
Not if its the correct kernel .
jje
Click to expand...
Click to collapse
what does correct kernel mean? some kernel that has that same KG2 / kg3/ etc stuff with your stock kernel?
JJEgan said:
xReal said:
Hey guys,
I want to flash a kernel over my custom rom should I just flash it with cwm?
Follow the instructions flash is either via Odin or CWM .
Is it going to brick my phone?
Not if its the correct kernel .
jje
Click to expand...
Click to collapse
How to know which kernel is correct?
As of now I am using Sensation rom which has Siyah kernel 2.5.2 and I want to flash speedmod kernel or N.E.A.K. Kernel,
N.E.A.K. Kernel only supports sammy roms
I tried to search but I could not find out if Sensation rom is aosp or sammy do you have any idea of it?
also does speedmod kernel support both as nothing it written about it on its thread
Thanks
Click to expand...
Click to collapse
xReal said:
How to know which kernel is correct?
As of now I am using Sensation rom which has Siyah kernel 2.5.2 and I want to flash speedmod kernel or N.E.A.K. Kernel,
N.E.A.K. Kernel only supports sammy roms
I tried to search but I could not find out if Sensation rom is aosp or sammy do you have any idea of it?
also does speedmod kernel support both as nothing it written about it on its thread
Thanks
Click to expand...
Click to collapse
Normally on the first page of a rom thread you will get a description what is the rom. For example MIUI is well MIUI. Hyperdroid is sammy deodex rom with of course modifications and tweaks in the build to make it better than stock.
Sensation rom is sammy deodex no aosp nothing like that. And when you normally look for an AOSP rom it normally would say it in the heading of the thread anyway.
On the kernel thread it has a guide of what roms the kernel works on and which ones it does not. Siyah works basically with any rom. CM7 to AOSP to sammy deodex. Regarding Simone's kernel which is the NEAK version or something like that it is based on only sammy stock deodex roms and that is mainly the ones in original development and android..just look out for deodex, sammy and stock rom
AS above its all a question of reading the info on the first page of the kernel post .
Plus if it does not work flash another one .
the Neak kernel should be ok been on mine for a few days .
Speedmod likewise ok have used it before .
jje
Thanks everyone for their wonderful help!
I have got one last question
Speedmod kernel says "it is only for Samsung Gingerbread ROMs. It will not work with CyanogenMod or MIUI ROMS!"
does this means it will not work with sensation rom?
Edit: ok looks like the different versions are just the updated ones
But still the question is if it supports sensation rom?
xReal said:
Thanks everyone for their wonderful help!
I have got one last question
Speedmod kernel says "it is only for Samsung Gingerbread ROMs. It will not work with CyanogenMod or MIUI ROMS!"
does this means it will not work with sensation rom?
Edit: ok looks like the different versions are just the updated ones
But still the question is if it supports sensation rom?
Click to expand...
Click to collapse
DroidTrix said:
Normally on the first page of a rom thread you will get a description what is the rom. For example MIUI is well MIUI. Hyperdroid is sammy deodex rom with of course modifications and tweaks in the build to make it better than stock.
Sensation rom is sammy deodex no aosp nothing like that. And when you normally look for an AOSP rom it normally would say it in the heading of the thread anyway.
On the kernel thread it has a guide of what roms the kernel works on and which ones it does not. Siyah works basically with any rom. CM7 to AOSP to sammy deodex. Regarding Simone's kernel which is the NEAK version or something like that it is based on only sammy stock deodex roms and that is mainly the ones in original development and android..just look out for deodex, sammy and stock rom
Click to expand...
Click to collapse
JJEgan said:
AS above its all a question of reading the info on the first page of the kernel post .
Plus if it does not work flash another one .
the Neak kernel should be ok been on mine for a few days .
Speedmod likewise ok have used it before .
jje
Click to expand...
Click to collapse
Dude. Did you even read these two responses from DroidTrix and JJEgan?
ctomgee said:
Dude. Did you even read these two responses from DroidTrix and JJEgan?
Click to expand...
Click to collapse
Yes indeed I have.
Am I missing anything?
Please elaborate your reply
Also please keep in mind that I have no experience of this so It might be a bit difficult for me to understand
xReal said:
Yes indeed I have.
Am I missing anything?
Please elaborate your reply
Also please keep in mind that I have no experience of this so It might be a bit difficult for me to understand
Click to expand...
Click to collapse
*sigh*
Ok.
DroidTrix said:
DroidTrix said:
Sensation rom is sammy deodex no aosp nothing like that. And when you normally look for an AOSP rom it normally would say it in the heading of the thread anyway.
On the kernel thread it has a guide of what roms the kernel works on and which ones it does not.
Click to expand...
Click to collapse
"Sammy deodex" means that the the ROM is based on Samsung stock.
DroidTrix ALSO said:
DroidTrix said:
On the kernel thread it has a guide of what roms the kernel works on and which ones it does not.
Click to expand...
Click to collapse
AND, JJEgan said:
JJEgan said:
AS above its all a question of reading the info on the first page of the kernel post.
Click to expand...
Click to collapse
You yourself said:
xReal said:
Speedmod kernel says "it is only for Samsung Gingerbread ROMs. It will not work with CyanogenMod or MIUI ROMS!"
Click to expand...
Click to collapse
Now, if you look at the VERY FIRST page for SensatioN ROM,, it says:
SensatioN ROM Features:
-Based on Samsung Firmware XWKK5 Android 2.3.6
With all of this information, you should be able to deduce that the Speedmod kernel WILL work with your ROM. If you still don't understand, I'm going to suggest you don't flash anything to your phone, for fear of ending up with a paperweight.
Ok this time I understand everything
I didn't knew that Sammy roms means that the ROM is based on Samsung's stock ROM
Also I thought that speedmod only works on stock ROM so all this things got me confused
But anyways now its all clear
xReal said:
Ok this time I understand everything
I didn't knew that Sammy roms means that the ROM is based on Samsung's stock ROM
Also I thought that speedmod only works on stock ROM so all this things got me confused
But anyways now its all clear
Click to expand...
Click to collapse
Sammy is short for Samsung.
Hello
I'm new into the world of flashing and rooting.
So I want to make my phone last longer and have it rooted.
I actually laid my eye's on the Siyahkernel and it looks really good.
So my question.
How to flash the Siyahkernel into my stock android version?
(Android-version 4.0.3 Baseband-version: i9100BULP6)
Could you recommend me a good tutorial?
And would you recommend the program [root]Triangle away?
Thx for reading
Siyah kernel is really appreciated and accepted by the people, but it is recently reported some problem with ICS Siyah kernel which is in Beta stage now,
so it is recommended to use CF-root for rooting your device first, then you can later on flash your favourite kernels.
Checkout CF-root thread link in my signature.
also refere Guide for ODIN flash,
Feel free to ask if you are not clear
You have to match the version code with your current kernel version, not the Baseband vesrion, to select the appropreate CF-root
Thanks for your help and your signature rocks ^^ keep it this way please
So I have to ask.
How big is the change that (when I use my PC normally and I do what the tutorial says) I brick my device? XD
yup many ppl ,i read thier prblm is some were related to kernel ,and the recent siyah kernels r not stable...so try neak or older versionss of siyah..
alright I'm going to flash the CF-Root kernel:
CF-Root-SGS2_BU_VOD_LPC-v5.4-CWM5.zip
Thx for your reply's
rocky23 said:
yup many ppl ,i read thier prblm is some were related to kernel ,and the recent siyah kernels r not stable...so try neak or older versionss of siyah..
Click to expand...
Click to collapse
Follow the Siyah's kernel thread, you would know that only one version (the rc6) had some weird "phone brick" issues which, we now know the reasons and the problem is fixed. The last 3.1 version is stable and works perfectly on my device , same thing for almost all users. Just wanted to moderate abit your comment .
well thanks for all your reply's
I installed the CF-root kernel and it workes
I will install the Siyahkernel when it gets a new feauture I need ;D
jorricks said:
well thanks for all your reply's
I installed the CF-root kernel and it workes
I will install the Siyahkernel when it gets a new feauture I need ;D
Click to expand...
Click to collapse
jorricks said:
Thanks for your help and your signature rocks ^^ keep it this way please
So I have to ask.
How big is the change that (when I use my PC normally and I do what the tutorial says) I brick my device? XD
Click to expand...
Click to collapse
You are Welocme,
you told my signature rocks, but you forgot to write a thing on that
hello all seached around for this but got lost,ive just geared up dual boot jellybam primary and ics stock on secondary, what id like to know is if i8 flash another rom for secondary will it install its own kernal and make me loose siyah and dual boot setup? thanx anyone
xmanz said:
hello all seached around for this but got lost,ive just geared up dual boot jellybam primary and ics stock on secondary, what id like to know is if i8 flash another rom for secondary will it install its own kernal and make me loose siyah and dual boot setup? thanx anyone
Click to expand...
Click to collapse
No, your kernel won't be touched. Just make sure it's possible to flash the new second rom with the Siyah kernel you use right now.
Sent from the Matrix
thanx
Thank you for the answer btw any rom recommendations for siyah?
Donnie Sins said:
No, your kernel won't be touched. Just make sure it's possible to flash the new second rom with the Siyah kernel you use right now.
Sent from the Matrix
Click to expand...
Click to collapse
xmanz said:
Thank you for the answer btw any rom recommendations for siyah?
Click to expand...
Click to collapse
Well that obviously depends on which version of Siyah you want to use as they all support different bases.
You would be much better off finding a rom you like and then flashing the appropriate Siyah kernel for it. However you can start off on any kernel version you like as custom rom will replace with its own kernel anyway so just flash Siyah again afterwards.
Also please note that this type of question is not allowed for various reason.
http://forum.xda-developers.com/showthread.php?t=1612881
re rom
Ok i wasnt asking for the best rom etc as i know the rules) i just wanted to cut my options down a little,atm im on siyah vsync 5.. but if you say the custom rom will reflah kernal,, havnt i then lost my dual boot ive set up? thanx
TheATHEiST said:
Well that obviously depends on which version of Siyah you want to use as they all support different bases.
You would be much better off finding a rom you like and then flashing the appropriate Siyah kernel for it. However you can start off on any kernel version you like as custom rom will replace with its own kernel anyway so just flash Siyah again afterwards.
Also please note that this type of question is not allowed for various reason.
http://forum.xda-developers.com/showthread.php?t=1612881
Click to expand...
Click to collapse
xmanz said:
Ok i wasnt asking for the best rom etc as i know the rules) i just wanted to cut my options down a little,atm im on siyah vsync 5.. but if you say the custom rom will reflah kernal,, havnt i then lost my dual boot ive set up? thanx
Click to expand...
Click to collapse
Only of you flash it as first rom.
xmanz said:
Ok i wasnt asking for the best rom etc as i know the rules) i just wanted to cut my options down a little,atm im on siyah vsync 5.. but if you say the custom rom will reflah kernal,, havnt i then lost my dual boot ive set up? thanx
Click to expand...
Click to collapse
Flashing another 1st rom will 'replace' your kernel. If you flash a new 2nd rom, the current kernel won't be replaced. Clear?
Sent from the Matrix
Ok got it very clear thanx
Donnie Sins said:
Flashing another 1st rom will 'replace' your kernel. If you flash a new 2nd rom, the current kernel won't be replaced. Clear?
Sent from the Matrix
Click to expand...
Click to collapse
I'm a bit rusty as i was busy with my exams for 5 months, with that being said.
i was rocking siayh kernel with 2 sammy based roms, then i flashed a 4.2.2 super nexus milestone as my prime rom which in turn replaced my kernel, so i DUMBLY tried flashing siyah x/ . now im stuck in some sort of boot-loop and im confused abt what im supposed to do right now
I forgot a lot abt dat stuff !
I have everything downloaded & what i was trying to achive was Foxhound ROM V2.7 (4.1.2) as my prime ROM & a super nexus as my secondary.
Siyah is my choice.
Sry guys for wasting some of your time, but i prefer asking the pros abt what should be done rather than trying something dumb again xD
I have every rom i used backed up as well as all the data i need!
THANKS FOR YOUR HELP !
Abo3mood said:
I'm a bit rusty as i was busy with my exams for 5 months, with that being said.
i was rocking siayh kernel with 2 sammy based roms, then i flashed a 4.2.2 super nexus milestone as my prime rom which in turn replaced my kernel, so i DUMBLY tried flashing siyah x/ . now im stuck in some sort of boot-loop and im confused abt what im supposed to do right now
I forgot a lot abt dat stuff !
I have everything downloaded & what i was trying to achive was Foxhound ROM V2.7 (4.1.2) as my prime ROM & a super nexus as my secondary.
Siyah is my choice.
Sry guys for wasting some of your time, but i prefer asking the pros abt what should be done rather than trying something dumb again xD
I have every rom i used backed up as well as all the data i need!
THANKS FOR YOUR HELP !
Click to expand...
Click to collapse
clean wipe and restore backup
MoonBlade said:
clean wipe and restore backup
Click to expand...
Click to collapse
mmm i dont have CMW recovery on phone jut the download mode recovery
Abo3mood said:
mmm i dont have CMW recovery on phone jut the download mode recovery
Click to expand...
Click to collapse
Flash stock rom then root .
Read the basic faqs and guides first .
jje
I am a newbie regarding android roms and all that .. and I need help ..
As I see dual booting in galaxy S2 .. I was wondering if I can .. then after some study on this site .. I get to know how to root .. now my phone is rooted but dont have CWM installed .. I tried to flash CWM .. it starts CWM successfully .. but after rebooting it again it start samsung recovery .. so my question here is .. Can I just flash CWM nd then Siyah Kernel same time without rebooting between each flash .. and One thing is that can I use my Samsung original Rom (4.1.2) as primary Rom and other rom (Resurrection Remix) as secondary ???
-*-*-*-*
I have tried my self .. when flashing Siyah Kernel .. it says some thing like asserts ... or like that .. and failed to flash kernel ..
now what am I suppose to do for flashing Siyah kernel or any better kernel for dual booting ... ??
Samsung Galaxy S2 GT I9100
4.1.2
1) If you really want help, you need to use a better title than 'Need help. Plenty of people will not even bother to read your thread in the first place due to that alone (you're lucky I'm bored right now).
2) The reason CWM isn't persisting after you reboot is because recovery is baked into the kernel on the SGS2 & isn't a separate partition like other phones. So if you want permanent CWM, you need to flash a custom kernel.
3) If you flash Siyah on it's own, you will end up with a rooted phone + CWM & you can go from there. I suspect the reason you got those errors are you used the wrong build for the particular Android version you are running. If you want to make it easy for yourself, I suggest you read the first page of the Siyah thread carefully then download the Odin version you need for the Android version you're running (I forget which is which; haven't run Siyah for >12 mths) & flash that.
Yes, you can dual boot with Siyah. There are detailed instructions in the Siyah threads, and there have also been a multitude of dual boot how-to's written (search in both cases).
Siyah kernel issues (reply)
MistahBungle said:
1) If you really want help, you need to use a better title than 'Need help. Plenty of people will not even bother to read your thread in the first place due to that alone (you're lucky I'm bored right now).
2) The reason CWM isn't persisting after you reboot is because recovery is baked into the kernel on the SGS2 & isn't a separate partition like other phones. So if you want permanent CWM, you need to flash a custom kernel.
3) If you flash Siyah on it's own, you will end up with a rooted phone + CWM & you can go from there. I suspect the reason you got those errors are you used the wrong build for the particular Android version you are running. If you want to make it easy for yourself, I suggest you read the first page of the Siyah thread carefully then download the Odin version you need for the Android version you're running (I forget which is which; haven't run Siyah for >12 mths) & flash that.
Yes, you can dual boot with Siyah. There are detailed instructions in the Siyah threads, and there have also been a multitude of dual boot how-to's written (search in both cases).
Click to expand...
Click to collapse
-*-*-*-*
thanx bro for ur reply .. nd yeah U are ryt for title thing .. I realized the same thing after posting the issue .. yeah I have read the Kernel thread nd I have flashed with the ryt version ( latest) ""Siyah-s2-v6.0b5-CWM"" I think this is the latest version of Siyah I could get from the Siyah Kernel site for S2 ..
If I consider to flash Dorimanx .. I think this is also dual boot supported .. what u guys reccomend .. ???
V6.0b5 is the latest siyah kernel he made. For dualbooting I would recommend dorimanx 8.xx as you will be able to run a modded stock Sammy rom and a aokp/cm rom at the same time. ? if you use 9.xx dorimanx kernel you will only be able to run aokp/cm roms.
8.32 dorimanx is rock stable running both custom and modded stock roms imo.
reply
andrewwright said:
V6.0b5 is the latest siyah kernel he made. For dualbooting I would recommend dorimanx 8.xx as you will be able to run a modded stock Sammy rom and a aokp/cm rom at the same time. ? if you use 9.xx dorimanx kernel you will only be able to run aokp/cm roms.
8.32 dorimanx is rock stable running both custom and modded stock roms imo.
Click to expand...
Click to collapse
thanx mate .. with dormanx 8.32 I will be able to use stock samsung Jb ( primary) with other secondary rom .. ?? am I ryt ..
Yes you can pick any stock Rom but it needs to be running a modded updater script for the preload. Then custom or another modded stock rom in 2nd rom. Look up @Troubadour666 he's made many dualboot threads and is a nice guy. Speak to him on all things dualboot. Can't go wrong with his advice :thumbup:
reply
andrewwright said:
Yes you can pick any stock Rom but it needs to be running a modded updater script for the preload. Then custom or another modded stock rom in 2nd rom. Look up @Troubadour666 he's made many dualboot threads and is a nice guy. Speak to him on all things dualboot. Can't go wrong with his advice :thumbup:
Click to expand...
Click to collapse
thnx mate .. another confusion of modded script ..
gulty of being noob .. .. lol
em trying to contact Troubadour666 .. nd trying to see his posts .. hope I find what I need ..
Pm him or post on his thread you need a bit of help mate. I'm sure he'll help you out as we were all noobs once.
reply
andrewwright said:
Pm him or post on his thread you need a bit of help mate. I'm sure he'll help you out as we were all noobs once.
Click to expand...
Click to collapse
thnx buddy .. yeah em on my way ..
Dualbooting is very handy at times. I was flashing upto 5 times a day. And still had a stock rom for daily :thumbup:
reply
andrewwright said:
Dualbooting is very handy at times. I was flashing upto 5 times a day. And still had a stock rom for daily :thumbup:
Click to expand...
Click to collapse
.. yeah it seems fun too .. I am an old android user but didnt mess up with development things before ..
I have pm him .. lets see what he suggests ..
Hi,
managing cwm is not my best support
but /data/sec_data/ , YES
after 10 hours , i dont see [SOLVE] in title
where are U ? "absorbed" by your S2 ?
Troubadour666 said:
Hi,
managing cwm is not my best support
but /data/sec_data/ , YES
after 10 hours , i dont see [SOLVE] in title
where are U ? "absorbed" by your S2 ?
Click to expand...
Click to collapse
sorry for being late .. got my PC crashed .. so lil work for that ..
c0olmad said:
sorry for being late .. got my PC crashed .. so lil work for that ..
Click to expand...
Click to collapse
do you want help for PC too ?
i'm PCs maintainer too
Troubadour666 said:
do you want help for PC too ?
i'm PCs maintainer too
Click to expand...
Click to collapse
hahahahhahaha .. thanx .. but i can do these stuff like PC thing on my own ..
Hahaha. I understand
sendé par les ondes sorties de mon s2
Troubadour666 said:
Hahaha. I understand
sendé par les ondes sorties de mon s2
Click to expand...
Click to collapse
thnks Guys for ur great help ..
c0olmad said:
thnks guys for ur great help ..
Click to expand...
Click to collapse
[solved & closed] ??
Troubadour666 said:
[solved & closed] ??
Click to expand...
Click to collapse
SOLVED