I have reinstalled cm10 JB but can not get a kernel i think. How can I install a new Kernel for this rom.
Thanks
Download komodo in thicklizards thread.
Just wipe caches and flash. If your s-on make sure to download the right version
Sent from my EVO using xda premium
Thanks. But I downloaded the file and installed it but the ROM will still not install. I have tried several other ROMs and the kernels for still no install. I get to recovery and boot loader but something is amiss.
Sent from my EVO using xda app-developers app
Did you install the kernel separately? This thread helped me out.
http://forum.xda-developers.com/showthread.php?t=1937949
Some people like me have to flash the voltage stabilizer with the kernel. Its also available at thicks download section
Sent from my EVO using xda premium
The voltage stabilizer made a big difference for me, highly recommended.
corcgaigh said:
Some people like me have to flash the voltage stabilizer with the kernel. Its also available at thicks download section
Sent from my EVO using xda premium
Click to expand...
Click to collapse
Related
So I'm really new to custom ROMs and recoveries, and I have a few questions. I already flashed ClockworkMod, but if I want to get rid of it, is deleting the update.zip all I have to do? And if I were to make a backup and then flash a custom ROM, but decided to go back to my recovery, it would be exactly like it was before flashing the custom ROM, correct? I think that's about it, thanks for taking the time to read and answer.
First flash the correct kernel (2.1 or 2.2 ) of the one used for your backup. Then restore. Then delete update.zip
After that it will be how you had it
Sent from my SGH-T959 using XDA App
jzun223 said:
First flash the correct kernel (2.1 or 2.2 ) of the one used for your backup. Then restore. Then delete update.zip
After that it will be how you had it
Sent from my SGH-T959 using XDA App
Click to expand...
Click to collapse
I think in this case doing you would also need to reset the phone and do a cache wipe as well then reboot and it would see as stock
So how would I get my hands on the stock kernel and flash it?
Sent from my SGH-T959 using XDA App
On the Vibrant Bible thread. Scroll down to Kernals.
Sent from my SGH-T959 using XDA App
Yeah that wouldn't hurt.
Sent from my SGH-T959 using XDA App
So I haven't had access to a computer the past few days, but how would I flash the stock kernel from the Bible thread? Is it just in an update.zip?
Sent from my SGH-T959 using XDA App
PigProtist said:
So I haven't had access to a computer the past few days, but how would I flash the stock kernel from the Bible thread? Is it just in an update.zip?
Sent from my SGH-T959 using XDA App
Click to expand...
Click to collapse
From your phones browser download the kernel. Once in recovery locate the kernal on your INTERNAL sd card and flash it like you would a rom. Hope that helps
Wow I didn't know you can jist flash ketnals Luke a rom. Good stucf
da_dragon2k3 said:
From your phones browser download the kernel. Once in recovery locate the kernal on your INTERNAL sd card and flash it like you would a rom. Hope that helps
Click to expand...
Click to collapse
da_dragon2k3 said:
From your phones browser download the kernel. Once in recovery locate the kernal on your INTERNAL sd card and flash it like you would a rom. Hope that helps
Click to expand...
Click to collapse
Wow, I feel dumb now, haha. And yeah, it helped a lot, thanks, and thanks to everyone else ITT.
Sent from my SGH-T959 using XDA App
My rom manager is not updating, saying some signature error. Right now I am on sensation rom using KI3 kernel.
Can anybody assist and also when I slide on my lock screen to unlock my camera starts automatically.
Please help, this is my first time at rooting.
Sent from my GT-I9100 using XDA App
Signature error due to the missing of zImage. Flash the zImage from your Rooted kernel, via CWM.
Sent from my GT-I9100 using Tapatalk
Can I flash another kernel over this kernel directly using odin and then installs a new custom rom
Also how many times can I do like this, will it harm my phone.
Sorry but this is my first android phone and I m new to this.
Thx in advance.
Sent from my GT-I9100 using XDA App
doppleganger2k said:
My rom manager is not updating, saying some signature error. Right now I am on sensation rom using KI3 kernel.
Click to expand...
Click to collapse
What do you need rom manager for? The sensation rom already comes the speedmod kernel which has cwm recovery, boot into recovery if you want to install other roms, don't bother with rom manager. You can flash all day long.
I noticed today that the data connection on my phone is not working the way it used to before I flashed the rom. Any particular reason or remedy for this.
No wonder have a better battery performance
Sent from my GT-I9100 using XDA App
And thank you for the advice given ;-)
Sent from my GT-I9100 using XDA App
Flashed nitroz extreme rom, swype not working now , any ideas y ?
Sent from my GT-I9100 using XDA App
Swype
doppleganger2k said:
Flashed nitroz extreme rom, swype not working now , any ideas y ?
Sent from my GT-I9100 using XDA App
Click to expand...
Click to collapse
Settings> applications> Swype> clear data. If this isn't working, install the beta beta.Swype.com
I'm new.... I was able to root my GP5 using superoneclick but now I'm trying to get a rom and have no idea how to do it.
What do i need?
Kernal
Clockwork mod
Rom
how do I install them/get them please help
We can't help you if we don't know which one you have.
Which one is it?
US.
Kor.
International.
Sent from my YP-G70 using xda app-developers app
DanieIRL said:
We can't help you if we don't know which one you have.
Which one is it?
US.
Kor.
International.
Sent from my YP-G70 using xda app-developers app
Click to expand...
Click to collapse
US
Also the reason for me wanting a new rom is for more bluetooth support
Sent from my YP-G70 using xda app-developers app
I followed this website.
http://calebfultz.com/2012/04/03/how-to-root-and-rom-the-galaxy-player-5-0/
The kernal I would recommend is Entropy512's for the SGP. The tutorial on there is very easy and very stright foward so you shouldn't have any problems at all. I would recommand the rom I'm currently using but the dev removed the link because he is updating the rom.
Sent from my GenericGinger ROM + Entropy512 Kernal Samsung Galaxy Player 5 U.S. using xda app-developers app
nightfire37 said:
I followed this website.
The kernal I would recommend is Entropy512's for the SGP. The tutorial on there is very easy and very stright foward so you shouldn't have any problems at all. I would recommand the rom I'm currently using but the dev removed the link because he is updating the rom.
Sent from my GenericGinger ROM + Entropy512 Kernal Samsung Galaxy Player 5 U.S. using xda app-developers app
Click to expand...
Click to collapse
thanks for this guide does the kernel work with other roms? and does the camera still work with this kernel?
Sent from my YP-G70 using xda app-developers app
WADE13x said:
thanks for this guide does the kernel work with other roms? and does the camera still work with this kernel?
Sent from my YP-G70 using xda app-developers app
Click to expand...
Click to collapse
Camera works normaly on that rom...I use chip rom.. everything works 2..I even delete stock recovery because there is no way I will back to stock.
Sent from my GT-I9000 using XDA
DZonikg said:
Camera works normaly on that rom...I use chip rom.. everything works 2..I even delete stock recovery because there is no way I will back to stock.
Sent from my GT-I9000 using XDA
Click to expand...
Click to collapse
Silly question, what's so bad about stock ROM? or to put it another what's so good about "Chip rom" ?
thanks!
tls1
tls1tls1 said:
Silly question, what's so bad about stock ROM? or to put it another what's so good about "Chip rom" ?
thanks!
tls1
Click to expand...
Click to collapse
Nothing in particular's bad w/r/t the stock ROM. It just isn't most people's cup of tea. Chip's ROM is pretty cool, though I'm limited in experience (onyl stock, Eryigit, and Chip's ROMs, to date) What I like about Chip's ROM is that it's up to date and is constantly in development, the style of it (ICS-theme), and that most of the bloatware's been removed. It's very operational and customizable. Plus, many of the "hacks" that he's introduced via init.d or elsewhere (courtesy of St. Matis; I've added a few of my own and deleted a few). He's edited the framework (or gathered it from another source) to get rid of that pesky "Cell Standby" thing that shows up as a battery drain (functionally irrelevant, but annoying nonetheless) and included a number of apps as stock that many here would install anyway. Look at the thread yourself and check its features
okay can someone please just help me? my computer doesn't pick up my galaxy player 5 when its in download mode
Sent from my YP-G70 using xda app-developers app
Good news i got the rom on an its chip 1.5 it turned out to be the computer
WADE13x said:
okay can someone please just help me? my computer doesn't pick up my galaxy player 5 when its in download mode
Sent from my YP-G70 using xda app-developers app
Click to expand...
Click to collapse
Disinstall all driver, make a clean install of the USB driver 1.5.6, install ODIN 1.8 and thats all...You have all you need to write a custom kernel from the stock one.
In Downolad mode the player is visible just from ODIN...i remember...
Otherwise, after installing the c.kernel, from the device recovery you can do all (c.rom-stock-kernel.zip addon).
nightfire37 said:
I followed this website.
http://calebfultz.com/2012/04/03/how-to-root-and-rom-the-galaxy-player-5-0/
The kernal I would recommend is Entropy512's for the SGP. The tutorial on there is very easy and very stright foward so you shouldn't have any problems at all. I would recommand the rom I'm currently using but the dev removed the link because he is updating the rom.
Sent from my GenericGinger ROM + Entropy512 Kernal Samsung Galaxy Player 5 U.S. using xda app-developers app
Click to expand...
Click to collapse
Thanks for the kind words and using my walk through! Glad it was helpful! :laugh:
My Photon is rooted, unlocked, CWM 5.0.2.8, Running CM 7 NIGHTLY 7/22. I wanted to switch to MIUI 2.7.27 Official Port for the Photon. Downloaded the Zip and GAPPS for the ROM, Nandroid Backup, Cleared Data/Factory Reset, Formated /Data, /System, /Cache, Cleared Delvik Cache and The Flashed The MIUI zip TWICE... went REALLY fast only showed MIUI Logo froze and then said rom completed. Flashed The Gapps and Rebooted... it stayed on the Motorola logo with Unlocked on the top for a whole day... i really want to switch to the MIUI Rom.... what am i doing wrong?
miui uses an installer that requires a rom to be installed on the phone. you wiped the system. don't wipe anything before installing. you can do that in the installer.
there are three files to flash. base, options then themes. it's a great rom. you'll enjoy it.
Sent from my MB855 using Tapatalk 2
So I download it from miui.us now what's the install process... its only one zip...
Bump... Anyone?
Sent from my MB855 using xda app-developers app
The zip on miui.us is only the ROM. You should be able to flash it but you have the wrong version of cwm. You need to have either jokers recovery v3, twrp, or cwm 5.0.2.7. 5.0.2.8 is from ROMmanager and doesn't work for any ics roms
sent from my MoPhoKing CMX MoPho
What is the recommended install? Kitchen sink does not react to touch...
Sent from my MB855 using xda app-developers app
Bump? If someone could tell me the best way to do this with my version of cement and the steps it would be much appreciated.
Sent from my MB855 using xda app-developers app
bradleymaustin said:
Bump? If someone could tell me the best way to do this with my version of cement and the steps it would be much appreciated.
Sent from my MB855 using xda app-developers app
Click to expand...
Click to collapse
Why don't you flash a rom that you can flash from CWM and then flash MIUI?
You could reinstall CM7 or AOKP.
Once installed run the MIUI installer (without wiping anything before starting the installer), and then install Gapps. You should then be good to go.
Also, I think you should spend some more time reading about what you're doing. It seems that you may be on the edge of not knowing what you're doing. I'd suggest (at a minimum) the first 3 posts in the MIUI thread should be understood in detail before doing this again.
In the stated version of cwm or do I need the old one
Sent from my MB855 using xda app-developers app
bradleymaustin said:
In the stated version of cwm or do I need the old one
Sent from my MB855 using xda app-developers app
Click to expand...
Click to collapse
I'm not sure. I run AOKP. I think if you've got jokers revision 3 of CWM that you're fine.
I'm on 5.0.2.7-photon3. I think you're one release newer, but make sure it's joker's version and you should be alright.
Check out qbking77 on YouTube. He has install vids for most of our roms.
sent from my MoPhoKing CMX MoPho
retailguy said:
I'm not sure. I run AOKP. I think if you've got jokers revision 3 of CWM that you're fine.
I'm on 5.0.2.7-photon3. I think you're one release newer, but make sure it's joker's version and you should be alright.
Click to expand...
Click to collapse
I'm on the rommanager version... 5.0.2.8
Sent from my MB855 using xda app-developers app
bradleymaustin said:
I'm on the rommanager version... 5.0.2.8
Sent from my MB855 using xda app-developers app
Click to expand...
Click to collapse
I wouldn't use that. Watch QBKing77's video. He'll walk you through it. I'd put CM7 back on and go from there.
His directions are awesome. That was a good idea!
I did use those walkthroughs.... no luck... only difference is the cwm version l
Sent from my MB855 using xda app-developers app
Problem chose older version of cwm known to work yet the display is all jacked up.
Sent from my MB855 using xda app-developers app
Get jokers recovery from Jokersax.com it "should" solve your issues
sent from my MoPhoKing CMX MoPho
How do I extract a kernel from one rom to another rom?
I did do a search and from what I have read you can download both zips and extract the boot.img from one rom and put it in the other rom. Is this correct, a step by step on PC or phone would be nice. Or just extract boot.img from one rom then install the other rom and flash the other boot.img in TWRP on top of that rom. Again a step by step guide would help me. If I could get the source is there a easy way to make a flashable zip? Or if there is another method.
EDIT: I'm S-Off and 3.16 without touchpanel and trying to take one CM10 kernel from a rom and place it in another CM10 rom then flash.
headpiece747 said:
How do I extract a kernel from one rom to another rom?
I did do a search and from what I have read you can download both zips and extract the boot.img from one rom and put it in the other rom. Is this correct, a step by step on PC or phone would be nice. Or just extract boot.img from one rom then install the other rom and flash the other boot.img in TWRP on top of that rom. Again a step by step guide would help me. If I could get the source is there a easy way to make a flashable zip? Or if there is another method.
Click to expand...
Click to collapse
Have you tried this? : https://play.google.com/store/apps/details?id=com.joeykrim.flashimagegui
Are you s-on?
If so, after extracting boot.img got to your folder that has your fastboot and adb exes in cmd and put your phone in fastboot usb and place your boot.img then issue the command: fastboot flash boot boot.img
Good luck!
Sent from my EVO using xda app-developers app
Yes I am S-Off. Also with the program you linked to it looks like it is for S-On and most of the instructions that I find are for S-On. If I am wrong could you point me in the right direction with a guide for Flash Image GUI.
headpiece747 said:
Yes I am S-Off. Also with the program you linked to it looks like it is for S-On and most of the instructions that I find are for S-On. If I am wrong could you point me in the right direction with a guide for Flash Image GUI.
Click to expand...
Click to collapse
If you are s-off you can use the same commands or flash custom kernels, depending on the rom version you are using you just need to place the zip in your sd card and flash through twrp... Can you give more details of your setup and what kernel rom are u using or which one are you trying /want to flash?
For 3.16 you can use either thicklizard's Arc Reactor Kernel or flas2's Bulletproof... And depending on the rom you are running overclock/underclock - change schedulers or change voltage values using scripts or apps like setcpu, android tuner, etc...
Sent from my EVO using xda app-developers app
jocarog said:
If you are s-off you can use the same commands or flash custom kernels, depending on the rom version you are using you just need to place the zip in your sd card and flash through twrp... Can you give more details of your setup and what kernel rom are u using or which one are you trying /want to flash?
For 3.16 you can use either thicklizard's Arc Reactor Kernel or flas2's Bulletproof... And depending on the rom you are running overclock/underclock - change schedulers or change voltage values using scripts or apps like setcpu, android tuner, etc...
Sent from my EVO using xda app-developers app
Click to expand...
Click to collapse
He's using AOSP, so those kernels won't work.
Sent from my EVO using xda premium
FinZ28 said:
He's using AOSP, so those kernels won't work.
Sent from my EVO using xda premium
Click to expand...
Click to collapse
My bad I didn't read the edit...
Sent from my EVO using xda app-developers app
jocarog said:
My bad I didn't read the edit...
Sent from my EVO using xda app-developers app
Click to expand...
Click to collapse
No sweat
Sent from my EVO using xda premium
jocarog said:
If you are s-off you can use the same commands or flash custom kernels, depending on the rom version you are using you just need to place the zip in your sd card and flash through twrp... Can you give more details of your setup and what kernel rom are u using or which one are you trying /want to flash?
For 3.16 you can use either thicklizard's Arc Reactor Kernel or flas2's Bulletproof... And depending on the rom you are running overclock/underclock - change schedulers or change voltage values using scripts or apps like setcpu, android tuner, etc...
Sent from my EVO using xda app-developers app
Click to expand...
Click to collapse
I am trying to take the Evervolv kernel from its rom and put on the ChameleonOS. Thanks for the replies.
Used your sig to give more info:
Device: HTC EVO 4G LTE
ROM: ChameleonOS by TroNit
Kernel: Stock ChameleonOS
Radio: 1.12.11.1210
PRL:25014
HBOOT: 2.09
S-OFF: DirtyRacun
What did you end up doing?
Sent from my EVO using xda premium
I just gave up for the time the being tried all the CM10/AOSP roms on here and Evervolv kernel/rom is only rom that bluetooth on my vehicle like the Sense roms I used. I tried to use Flash Image GUI and it extracted the kernel I think but it put ChameleonOS on boot animation and would not load. Then I took the boot.img out of the Evervolv rom and replace it in the ChameleonOS and flashed and it would not load so it is either not compatible or I am doing something wrong.
Sounds like they aren't compatible.
Sent from my EVO using xda premium
headpiece747 said:
I just gave up for the time the being tried all the CM10/AOSP roms on here and Evervolv kernel/rom is only rom that bluetooth on my vehicle like the Sense roms I used. I tried to use Flash Image GUI and it extracted the kernel I think but it put ChameleonOS on boot animation and would not load. Then I took the boot.img out of the Evervolv rom and replace it in the ChameleonOS and flashed and it would not load so it is either not compatible or I am doing something wrong.
Click to expand...
Click to collapse
Did you check the Linux version? I'm using komodo with cm10.1 inverted rom from tronit without any issue, I've flashed the kernel stabilizer as well...
Sent from my EVO using xda app-developers app
I tried Komodo with Jellybam and the bluetooth was the same so I abandoned it but I think I will try to flash the boot.img from Evervolv again with this a see if it does anything.
headpiece747 said:
I tried Komodo with Jellybam and the bluetooth was the same so I abandoned it but I think I will try to flash the boot.img from Evervolv again with this a see if it does anything.
Click to expand...
Click to collapse
And what's wrong with your bluetooth?
Sent from my EVO using xda app-developers app
The bluetooth pauses every few seconds and the audio is sped up.