I have a Samsung Galaxy S Wifi 5.0, and lately it won't charge naturally (it doesn't charge when you just plug the USB cable to the port and to the wall), but you need to charge it a certain angle (eg move it until you hear the charging sound but afterwards it won't charge when you remove it!)
I have the original Samsung adapter that came with the SGP Box, but I replaced the original USB cable with another one because of the charge-at-a-certain-angle problem. I changed my USB cable thrice now, but the problem persists.
The weird thing is, it charges perfectly on a BLACKBERRY CHARGER. Although the problem is still there when I charge it with the BB charger, it never got to the point where I had to apply so much pressure on my tablet.
I just want to know what is causing this problem and a solution. I can't always use the BB charger since my sister brings it with her to school everyday. -_-
I had the same problem with my Galaxy SI. I was forced to place a book directly under the usb cable so that the phone sloped downwards. I had different luck with different usp cables. My girlfriends usb cable -that was relatively new worked fine as it sat quite snuggly/tight. Others, new or old, that did not sit as tight did not work.
Take you phone to a PC hardware store and test a few.
Hopefully you will find that it is the usb cable that is worn and not the inside of the phone.
Thanks, I'll try that out!
Related
Hello,
I work in IT, and have been given two of these phones that both have their own problems. I finally found a disassembly guide at http://www.pdacenter.ru/razborka/razbor_htc_star_trek/
The one phone has no charging port at all. The other phone has a broken external LCD screen. So I want to move the working external LCD from the phone with the broken proprietary usb port to the phone with the broken screen. In theory I should have a working phone.
Now I don't have any wall charger for this phone (blasted proprietary port!) But I have the usb sync cable that fits the phone. I tried plugging this into 4 different USB ports and none of them will charge the dang thing. I guess my question is, does the USB sync cable charge the STAR100? I have two batteries here that are dead (they sat around for months). I know my Cingular 8525 Hermes charges via the USB port (although that port is very flaky, I use a desktop charger).
So am I out of luck, or do I need to get a wall charger? I could find one at work to test tomorrow, but I would of liked to test it now.
move
instead of doing that, move the working control board from the one with the good charging port to the other one, it will be much easier and yes you can use the usb to charge.
Thanks I got it to work.
Today at work I sourced a wall charger. That made the LED light red on the phone, after awhile it turned orange, then green (after about 4+ hours). Now it appears to charge off the USB cable at home.
Now if I can only figure out how to get a T-Mobile sim to work in it, without paying an unlocking service (I have enough bills to pay with a wedding coming up this October).
So I was charging my phone and using it at the same time...and the charger doesnt stay in. its so loose....anyone else have this problem?
When my wife and I first got our Captivates her connection was really loose and would fall out. It turned out to be the plug itself, so maybe you can take it back to where you bought it from and ask for a new one.
This is my third Samsung android phone (captivate and nexus s), and it seems to be a common issue. I think its the cable though, as an HTC cable is nice and snug.
Sent from my ATT GS2
Have you tried plugging in another cable yet? Micro USB is a pretty common cable these days.
No problems with loose connections here.
In MicroUSB, the springs are moved from the device to the cable - so try another cable.
Hi All,
I was wondering if anyone had any insights in to this problem I have been having.
Briefly, I have the 4g lte verion on EE's new network. I purchased the official MHL/HDMI adapter which works fine and the video is outputed to my sammy 50inch tv fine. The issue I have is the battery drains while doing so. I belive this may to due to the phone outputting more than it is drawing from the power source. Any thoughts ?
I spoke with Samsung tech and they said a number of people have started to report this issue and they are currently testing/investigating. If this is indeed the case seems a pointless acessory as a long video would possibly drain the whole battery, Im yet to test the full drain time.
Secondly, with a 3rd party docking cradle with spare battery slot which purchased from amazon (http://www.amazon.co.uk/eLifeStore®-Samsung-Desktop-Charger-Docking/dp/B008PPRGFY) also does not charge phone properly. Even with the orignial charger in the ac port (or usb port) . The phone reports as charging but stays the same or decreases. Charged directly from the socket it is fine. Strange!
Any help or thoughts would be greatly appreciated.
Thanks
Ian
It's common. Mine did that too! I switched to my old S2 charger, problem solved
Thanks Ill try that out, any idea why that works ?
lawboffin said:
Thanks Ill try that out, any idea why that works ?
Click to expand...
Click to collapse
No idea man? A design fault maybe? All I know is that my phone took for f#*%ing ever to charge with the USB type wall charger. I pulled it out of the socket and plugged my other other one in that was sitting right next to it and it started charging? Checked a few minutes later and it had climbed considerably so I pulled the USB cable out of the new plug and kicked it under the bed where it now lays resting not to be used again LOL.
USB plug/cord works perfectly fine? So I use it on the computer. My laptop even charges the phone via the USB cable faster than the socket plug (which is usually the opposite - as I am sure we are all aware). So yeah I would say poor design or defective wall plug or both or something? Wasn't going to send my phone back because of it. 2second decision problem solved Samsung phone is great!
Im having exactly the same problem.
I have an s3 on orange and have the same mhl adapter conected to my tv.
I have tried the charger from my s3 which does says its charging when I connect my phone but only for about a minute so I also tried using the charger from my s2 and that just does exactly the same.
An easier way is to buy the official allshare dongle for your hdtv then you can stream anything from your phones screen direct to your tv and can have the phone on charge via pc or wall socket at the same time,
Hope this helps
i suggest you throw away your original charger (slow charge) and its usb cable (loose - actually caused the extsd to become damaged to the point i had to repartition) and buy yourself a cheap usb cable for data (£2) and a 3rd party charger (pref not a usb adapter one - £5) and all should be fine!
I still experienced a small battery drain while using the mhl adapter, however, i froze a few apps with titianuim (ones i know run all the time like utter and tasker, paragon ntfs, easy ums, directory bind etc), and put it on min brightness - works like a charm. I know its a effort freezing apps but does the trick with my phone... Since finding that out i actually keep paragon & easy ums frozen till i need them...
just a few thoughts for you....
Like a week ago my S3 9300 was taking longer and longer to charge now it won't charge at all, now is always stuck at 0% if i turn it off it will charge but very very slowly, i don't know if it's the phone or the battery maybe someone here had the same problem and could help me out a little, btw i have it with CM 10.1 thank you
Alejo
Had the same exact problem with my i9300, got it out of warranty repairs yesterday. Was using a custom rom, but the same thing happened when I finally managed to flash it back to stock (had to manually press the microusb-cable as hard as I could into the phone all the time in order to get the phone recognized while Odin was working, was the longest flash ever lol..).
Remember reading about cold solder joints etc before sending it off, so if your phone is out of warranty for some reason you could replace the charging port yourself. Replacement part costs ~5$ (eBay) and if you got the skills it shouldn't be too hard to replace.
EDIT: Actually mine didn't even charge when power off, so I was pretty certain it was a bad solder joint or some other physical problem.. Have you tried cleaning the usb port with pressured air or just blowing into the port? Could be some pins of the usb port blocked with debris. Also check your usb cables, there are those with 5 pins and those with only 4. Saw the difference in charging speed while the thing was still working.
zombie112 said:
Had the same exact problem with my i9300, got it out of warranty repairs yesterday. Was using a custom rom, but the same thing happened when I finally managed to flash it back to stock (had to manually press the microusb-cable as hard as I could into the phone all the time in order to get the phone recognized while Odin was working, was the longest flash ever lol..).
Remember reading about cold solder joints etc before sending it off, so if your phone is out of warranty for some reason you could replace the charging port yourself. Replacement part costs ~5$ (eBay) and if you got the skills it shouldn't be too hard to replace.
Click to expand...
Click to collapse
Well actually when i plug the phone into the PC it will recognize it and i can access the files in the SD card and Internal Memory and everything at the moment it's turned off and it's charging.
I have the problem that the phone only want to charge with soms chargers.
I can connect the phone to the original charger or to a pc or any device without problems, the phone will charge.
Even with an old blackberry charger (only 2 wires, no data) and car charger can i charge without any problem!
But when i connect the phone to the htc charger of my old phone, or to an iphone charger i see the phone is connected but it won't charge.
When i open batterymonitor i see that the charger is connected, but the phone still use his battery.
I tried this with all kinds of charders and all kinds of micro usb cables. Then i thaught there was maybe a resistor or chip or something build in some chargers, because i couls only charge with chargers with 2 wire cables.
Then i took a usb extension cable and i disconnected the two data wires so only the + and - 5V cables were left,
but still no success. If anybody knows where the problem is, please let my know
with kind regards! Martijn
Hello, first of all apologize for my English.
My Xperia Z2 has problems with the USB connector, I know you have some reports of this, but I think I have not found any solution yet. He is almost 3 years old, I think it is normal to present problems, but I still do not want to change my cell phone.
I am having serious problems trying to connect it with the charger via usb, I have to wrap the cable around the device, pull to see if I find a way to connect it, when it connects and starts charging, after a while it starts to hurt Contact again.
When I bought the phone, I used a magnetic charger, but because it was not original cables, it went wrong and I decided to use it for the same cable. I saw that some problems occur because of connecting the magnetic to the opposite, but it has almost 2 years that I do not use and the cell phone always charged normally.
Any solution?
Hey,
I started to have the same issue until it stopped altogether. I had to disassemble my phone last week to fit a replacement LCD and digitizer, and noted that my USB connector had actually snapped off from the logic board!
~TL/DR~ The simple solution is to make use of the magnetic charger. You can get the official charging dock or cables. Both are cheap enough, easy to use and charge the device rapidly.
Alex