Hello guys!
Let me tell you a story...
I bought an Lumia 710 a few days ago and now I want do debrand it and update it to Windows Phone 7.8. I've followed every single tutorial I could find on the internet, starting from debranding to unlocking bootloader and jailbreaking it. Didn't tried everyone in fear of messing the phone up.
I ended up on Nokia Care Suite with a few firmware files and a very huge desire to update my phone. The matter is that, as soon as I connect my phone to start the flashing process on NCS, it reboots (the phone), vibrates and keeps on this semi-power off state. I know that this was supposed to happen, but now NCS doesn't recognise my phone in *any* way. I can reboot the phone holding vol+, reboot holding nothing, start all over again... Just nothing.
All I want is to debrand my phone to a Nokia firmware (not a TIM one, I really hate those custom boot and apps) and update it to WP7.8, but I also want to work with Zune (sync and updates). Can someone PLEASE help me?
One more thing: when I was reading about all these stuff, I came up with the unlocking bootloader process. It said that I needed to have the Qualcomm boot loader, so I tried to identify it (holding vol+ and plugging USB) and it appeared on my device manager something like Qualcomm MSM blah blah blah. This means that my phone is with Qualcomm bootloaders, right?
Thanks in advance!
If device manager says you have a Qualcomm bootloader you are 90% of the way there
All you need to do now is download this downloader.exe
http://forum.xda-developers.com/showthread.php?t=1665821
Download NaviFirm Plus from here
http://www.symbian-toys.com/navifirm.aspx
In Navifirm Plus, navigate to here
http://localhostr.com/files/jXWZZOI/Capture.PNG
And hit the download button
When it is downloaded, goto the download location and copy this file to the desktop or a folder
http://localhostr.com/files/eT3POA2/Capture.PNG
Use 7zip to extract that file and you should have 'boot.img' file
Rename that to stock.nb (You'll need to enable file extensions to be shown so you can see the .img and .nb extensions - do that from folders view menu)
Now extract that downloader.exe you got from the first link I posted and copy stock.nb into the same folder
You should have downloader.exe and stock.nb in that folder
Ok, now unplug your phone from the PC
Power off the phone
Hold Volume+ button in and plug in the phone to USB > PC
When you feel the short vibrate, release the Volume+ button
IF THE PC ASKS TO FORMAT THE PHONE, PRESS CANCEL, DO NOT FORMAT OR YOUR PHONE IS DEAD
Wait for the driver to install (If it has not already)
Run downloader.exe as Admin
Press the button on the downloader.exe to start flashing the phone
Wait for it to complete then remove the phone battery for 10 seconds, and then put it back in and reboot into 7.8
Done
If you can't stop the phone rebooting after plugging in the USB cable, try it without the battery in
If you don't have the qualcomm bootloader, use this NSS to flash the bootloader then repeat the above
http://forum.xda-developers.com/showthread.php?t=1620629
Good luck
THANK YOU! Updated to Windows Phone 7.8 with this method
I don't want to sound inconvenient, but how do I jailbreak/root it now? This is the last thing that is missing
Thanks a LOT!
Renan Lazarotto said:
THANK YOU! Updated to Windows Phone 7.8 with this method
I don't want to sound inconvenient, but how do I jailbreak/root it now? This is the last thing that is missing
Thanks a LOT!
Click to expand...
Click to collapse
No problem
You can't actually jailbreak stock ROMs yet (Sucks I know), you have to flash an already unlocked ROM from one of the devs here
Same method as above, only swap the stock ROM for the custom one
(What I missed from above, and thankfully you were clever enough to know not to do it, is when the PC asks to format the phone, ALWAYS press CANCEL, DO NOT FORMAT or you kill the phone dead !)
*Detection* said:
No problem
You can't actually jailbreak stock ROMs yet (Sucks I know), you have to flash an already unlocked ROM from one of the devs here
Same method as above, only swap the stock ROM for the custom one
(What I missed from above, and thankfully you were clever enough to know not to do it, is when the PC asks to format the phone, ALWAYS press CANCEL, DO NOT FORMAT or you kill the phone dead !)
Click to expand...
Click to collapse
And how can I modify an stock-rom to add these features? I was searching for it a few time ago, I've played with the OS Builder but I was a bit nervous on doing something wrong. I've also searched for some tutorials but haven't found anything yet. Can you point me where I should start?
Thanks!
Renan Lazarotto said:
And how can I modify an stock-rom to add these features? I was searching for it a few time ago, I've played with the OS Builder but I was a bit nervous on doing something wrong. I've also searched for some tutorials but haven't found anything yet. Can you point me where I should start?
Thanks!
Click to expand...
Click to collapse
I'd ask one of the devs here, I haven't tried to customise a ROM yet
Just reply to one of the 710 custom ROM threads or PM the dev
first, i would recommend you doing some reading: wp7 chef central
lordmaxey said:
first, i would recommend you doing some reading: wp7 chef central
Click to expand...
Click to collapse
Renan Lazarotto said:
I was searching for it a few time ago, I've played with the OS Builder but I was a bit nervous on doing something wrong. I've also searched for some tutorials but haven't found anything yet.
Click to expand...
Click to collapse
Already searched, nothing very well detailed...
@ detection
*Detection* said:
If device manager says you have a Qualcomm bootloader you are 90% of the way there
All you need to do now is download this downloader.exe
http://forum.xda-developers.com/showthread.php?t=1665821
Download NaviFirm Plus from here
http://www.symbian-toys.com/navifirm.aspx
In Navifirm Plus, navigate to here
http://localhostr.com/files/jXWZZOI/Capture.PNG
And hit the download button
When it is downloaded, goto the download location and copy this file to the desktop or a folder
http://localhostr.com/files/eT3POA2/Capture.PNG
Use 7zip to extract that file and you should have 'boot.img' file
Rename that to stock.nb (You'll need to enable file extensions to be shown so you can see the .img and .nb extensions - do that from folders view menu)
Now extract that downloader.exe you got from the first link I posted and copy stock.nb into the same folder
You should have downloader.exe and stock.nb in that folder
Ok, now unplug your phone from the PC
Power off the phone
Hold Volume+ button in and plug in the phone to USB > PC
When you feel the short vibrate, release the Volume+ button
IF THE PC ASKS TO FORMAT THE PHONE, PRESS CANCEL, DO NOT FORMAT OR YOUR PHONE IS DEAD
Wait for the driver to install (If it has not already)
Run downloader.exe as Admin
Press the button on the downloader.exe to start flashing the phone
Wait for it to complete then remove the phone battery for 10 seconds, and then put it back in and reboot into 7.8
Done
If you can't stop the phone rebooting after plugging in the USB cable, try it without the battery in
If you don't have the qualcomm bootloader, use this NSS to flash the bootloader then repeat the above
http://forum.xda-developers.com/showthread.php?t=1620629
Good luck
Click to expand...
Click to collapse
What if device manager also dont see the lumia 710.
Like my problem here.
What can i do now?
Bump.
ive click n formated the phone now its not booting up plz help:crying:
Thanks for this wonderful tutorial
Used it to reboot my dead lumia 710
wondering why his post in 2016? Bored and jobless
*Detection* said:
If device manager says you have a Qualcomm bootloader you are 90% of the way there
All you need to do now is download this downloader.exe
http://forum.xda-developers.com/showthread.php?t=1665821
Download NaviFirm Plus from here
http://www.symbian-toys.com/navifirm.aspx
In Navifirm Plus, navigate to here
http://localhostr.com/files/jXWZZOI/Capture.PNG
And hit the download button
When it is downloaded, goto the download location and copy this file to the desktop or a folder
http://localhostr.com/files/eT3POA2/Capture.PNG
Use 7zip to extract that file and you should have 'boot.img' file
Rename that to stock.nb (You'll need to enable file extensions to be shown so you can see the .img and .nb extensions - do that from folders view menu)
Now extract that downloader.exe you got from the first link I posted and copy stock.nb into the same folder
You should have downloader.exe and stock.nb in that folder
Ok, now unplug your phone from the PC
Power off the phone
Hold Volume+ button in and plug in the phone to USB > PC
When you feel the short vibrate, release the Volume+ button
IF THE PC ASKS TO FORMAT THE PHONE, PRESS CANCEL, DO NOT FORMAT OR YOUR PHONE IS DEAD
Wait for the driver to install (If it has not already)
Run downloader.exe as Admin
Press the button on the downloader.exe to start flashing the phone
Wait for it to complete then remove the phone battery for 10 seconds, and then put it back in and reboot into 7.8
Done
If you can't stop the phone rebooting after plugging in the USB cable, try it without the battery in
If you don't have the qualcomm bootloader, use this NSS to flash the bootloader then repeat the above
http://forum.xda-developers.com/showthread.php?t=1620629
Good luck
Click to expand...
Click to collapse
Related
i Was on JB V20A and i installed the root and the CWM and try to put cwm. to check if bootloader was still locked well it does.
and now im stock on L9 Security error.
i can enter on S/W and tryin using the "UpTestEX_mod2_marwin" the Window enabler and the Http.exe to flash it but.
i try phone mode CS_emergency and emergency but when it start to check the phone it stuck on 15% and i can turn on the phone (thats the way i used to bypass the 15% and get with the instalation)
so what now? i can enter on S/W and Recovery Mode LG (This mode is for data backip at service center. after reboting press power key to keep using phone), still can do hard reset pressing volumen less home and power but nothing happen keep with the error.
i know while the phone turn on there's a solution.
my phone is L9 p768g
just don't view the post and ignore. :/
TY for all the view and the 900000 helps. nvm i solved ty to my fb L9 friends so... jodan
Jctatis said:
TY for all the view and the 900000 helps. nvm i solved ty to my fb L9 friends so... jodan
Click to expand...
Click to collapse
I have the same situation, may I know what your solution is?
twinwoods said:
I have the same situation, may I know what your solution is?
Click to expand...
Click to collapse
This case is very simple to solve. When you try to install a custom recovery with your bootloader locked, the phone system detects it and give you a message of an error in security, like in your case. To solve this, you'll need to reflash your rom. By doing this, the KDZ will reflash the original recovery and you will be able to access your phone/recovery again.
Step by step:
1. You need to install fastboot drivers: http://forum.xda-developers.com/showthread.php?t=2119090
Turn off the phone and remove the battery. Download THIS and exctract it to C:/. Open device manager in windows (Rigt click on Computer > Manage > Device manager) and connect your phone without the battery to pc via USB cable. Look in device manager for a new hardware connected, right click on it and click in update drivers. In the window open, select "Search for software driver in the computer" and in the window open select insert C:\fastboot\usb_drv_windows, tick the option "include subfolders" and advance. A pop up window may appear asking you if you do want to install the driver, choose YES and the drivers will install.
2. Navigate to the folder you extracted (C:/fastboot) and double click on start.bat. It will ask you for administrator privileges, just say yes.
3. Select your phone model (2 for P760, 3 for P765, 4 for P768 and 5 for P769). It will ask you to turn off your phone and remove battery. When you done with that, press enter. It will now ask you to insert USB cable with the phone without the battery and after 4 seconds re-insert the battery. Onde you done with that, it wil return a message to press any key. In this step the fastboot drivers may be installed again. Don't worry, it's normal
4. Remove the battery again, wait a few seconds and re-insert it.
5. Plug the USB cable in the phone with the battery in and let VOL UP pressed. The phone will enter in SW Update mode.
6. Follow THIS to reflash your rom. A list of avaiable official roms of different models is HERE. Remember to only flash roms made for your phone model or you may get some issues.
7. You're all done I recommend using THIS TWEAK, the phone becomes more responsive.
*** If you flashed a JellyBean rom (V20X.kdz) you can easily root with THIS and if you want CWM recovery use THIS ONE ------ REMEMBER NOT TO FLASH ANY CUSTOM ROM WITH THIS RECOVERY BECAUSE I'M CONSIDERING YOUR BOOTLOADER IS LOCKED AND FOR THIS REASON, YOU CANNOT FLASH CUSTOM ROMS WITH CWM, IT JUST DOESNT WORK!!!
Hope it help you
It works!!
shucrut said:
This case is very simple to solve. When you try to install a custom recovery with your bootloader locked, the phone system detects it and give you a message of an error in security, like in your case. To solve this, you'll need to reflash your rom. By doing this, the KDZ will reflash the original recovery and you will be able to access your phone/recovery again.
Step by step:
1. You need to install fastboot drivers:
Turn off the phone and remove the battery. Download THIS and exctract it to C:/. Open device manager in windows (Rigt click on Computer > Manage > Device manager) and connect your phone without the battery to pc via USB cable. Look in device manager for a new hardware connected, right click on it and click in update drivers. In the window open, select "Search for software driver in the computer" and in the window open select insert C:\fastboot\usb_drv_windows, tick the option "include subfolders" and advance. A pop up window may appear asking you if you do want to install the driver, choose YES and the drivers will install.
2. Navigate to the folder you extracted (C:/fastboot) and double click on start.bat. It will ask you for administrator privileges, just say yes.
3. Select your phone model (2 for P760, 3 for P765, 4 for P768 and 5 for P769). It will ask you to turn off your phone and remove battery. When you done with that, press enter. It will now ask you to insert USB cable with the phone without the battery and after 4 seconds re-insert the battery. Onde you done with that, it wil return a message to press any key. In this step the fastboot drivers may be installed again. Don't worry, it's normal
4. Remove the battery again, wait a few seconds and re-insert it.
5. Plug the USB cable in the phone with the battery in and let VOL UP pressed. The phone will enter in SW Update mode.
6. Follow THIS to reflash your rom. A list of avaiable official roms of different models is HERE Remember to only flash roms made for your phone model or you may get some issues.
7. You're all done I recommend using THIS TWEAK , the phone becomes more responsive.
*** If you flashed a JellyBean rom (V20X.kdz) you can easily root with THIS and if you want CWM recovery use THIS ONE ------ REMEMBER NOT TO FLASH ANY CUSTOM ROM WITH THIS RECOVERY BECAUSE I'M CONSIDERING YOUR BOOTLOADER IS LOCKED AND FOR THIS REASON, YOU CANNOT FLASH CUSTOM ROMS WITH CWM, IT JUST DOESNT WORK!!!
Hope it help you
Click to expand...
Click to collapse
Thank you so much. Yes my P769 BOOTLOADER definitely is locked and I can't even root it with all methods provided in xda, I use exactly your method to get my L9 back to life -- although I have to flash it back to original stock but at least it's BACK! Thank you so much. I saw some other people have the same issue but they can't make it work, hopefully your answer shed the light to ALL!
security error just use the lg pc suite and remove the lines or the host put recover via recovery and put your imei and it will start to download the stock Rom
send from cursed G-P768g 4.1.2. Panamà
grupo Facebook L9 latino América: https://m.facebook.com/groups/54638...ity&actorid=1381295152&__user=100001612362905
Thank you soo much!!! you seriously saved me.
shucrut said:
This case is very simple to solve. When you try to install a custom recovery with your bootloader locked, the phone system detects it and give you a message of an error in security, like in your case. To solve this, you'll need to reflash your rom. By doing this, the KDZ will reflash the original recovery and you will be able to access your phone/recovery again.
Step by step:
1. You need to install fastboot drivers: http://forum.xda-developers.com/showthread.php?t=2119090
Turn off the phone and remove the battery. Download THIS and exctract it to C:/. Open device manager in windows (Rigt click on Computer > Manage > Device manager) and connect your phone without the battery to pc via USB cable. Look in device manager for a new hardware connected, right click on it and click in update drivers. In the window open, select "Search for software driver in the computer" and in the window open select insert C:\fastboot\usb_drv_windows, tick the option "include subfolders" and advance. A pop up window may appear asking you if you do want to install the driver, choose YES and the drivers will install.
2. Navigate to the folder you extracted (C:/fastboot) and double click on start.bat. It will ask you for administrator privileges, just say yes.
3. Select your phone model (2 for P760, 3 for P765, 4 for P768 and 5 for P769). It will ask you to turn off your phone and remove battery. When you done with that, press enter. It will now ask you to insert USB cable with the phone without the battery and after 4 seconds re-insert the battery. Onde you done with that, it wil return a message to press any key. In this step the fastboot drivers may be installed again. Don't worry, it's normal
4. Remove the battery again, wait a few seconds and re-insert it.
5. Plug the USB cable in the phone with the battery in and let VOL UP pressed. The phone will enter in SW Update mode.
6. Follow THIS to reflash your rom. A list of avaiable official roms of different models is HERE. Remember to only flash roms made for your phone model or you may get some issues.
7. You're all done I recommend using THIS TWEAK, the phone becomes more responsive.
*** If you flashed a JellyBean rom (V20X.kdz) you can easily root with THIS and if you want CWM recovery use THIS ONE ------ REMEMBER NOT TO FLASH ANY CUSTOM ROM WITH THIS RECOVERY BECAUSE I'M CONSIDERING YOUR BOOTLOADER IS LOCKED AND FOR THIS REASON, YOU CANNOT FLASH CUSTOM ROMS WITH CWM, IT JUST DOESNT WORK!!!
Hope it help you
Click to expand...
Click to collapse
I tried this method and the offline kdz method and here is the trouble I am having.
1. With this method I do everything perfect the device shows up for a couple seconds then it disappears so I cannot go any further.
2. With the offline fix I followed the OP to the letter and when I get to the part where I click on "normal web upgrade" I open it and start the upgrade as stated in the OP and nothing. I get the retry or cancel internet warning and ignore or close it and it will not even try pushing the file.
Anyway I have tried 2 different machines to no avail I am wondering if anyone has had a similar problem and fixed it?
Sent from my GT-I9505G using Tapatalk 2
Didn't work for me! But I tried another method and that saved me from a lot of steps.
Just install the driver and the latest LGMobile Support Tool
Start your phone in Software upgrade mode... Power + Vol up
In the LGMobile Support Tool click on Options and then Upgrade Recovery
Put your IMEI in the option that pops up
Wait for the miracle!
It worked for me ... NO MORE LG SECURITY ERROR
MJHawaii said:
I tried this method and the offline kdz method and here is the trouble I am having.
1. With this method I do everything perfect the device shows up for a couple seconds then it disappears so I cannot go any further.
2. With the offline fix I followed the OP to the letter and when I get to the part where I click on "normal web upgrade" I open it and start the upgrade as stated in the OP and nothing. I get the retry or cancel internet warning and ignore or close it and it will not even try pushing the file.
Anyway I have tried 2 different machines to no avail I am wondering if anyone has had a similar problem and fixed it?
Sent from my GT-I9505G using Tapatalk 2
Click to expand...
Click to collapse
Fixed my phone too. I removed lookout permanently and my phone stopped functioning, so I did the method u said and worked great, I got scared but it worked. Lookout is installed again, I can root again and uproot if I want, it works great again. I recommend this method to all
Sent from my LG-P769 using xda app-developers app
it worked! thanks!
the easiest!!
Owadel said:
Didn't work for me! But I tried another method and that saved me from a lot of steps.
Just install the driver and the latest LGMobile Support Tool
Start your phone in Software upgrade mode... Power + Vol up
In the LGMobile Support Tool click on Options and then Upgrade Recovery
Put your IMEI in the option that pops up
Wait for the miracle!
It worked for me ... NO MORE LG SECURITY ERROR
Click to expand...
Click to collapse
i think this is the easiest method to get back to your "last working condition".. i mean nothng got deleted, nothng chnged.. i'm happy to get rid of the "security error" condition!! thanks a lot
shucrut said:
This case is very simple to solve. When you try to install a custom recovery with your bootloader locked, the phone system detects it and give you a message of an error in security, like in your case. To solve this, you'll need to reflash your rom. By doing this, the KDZ will reflash the original recovery and you will be able to access your phone/recovery again.
Step by step:
1. You need to install fastboot drivers: http://forum.xda-developers.com/showthread.php?t=2119090
Turn off the phone and remove the battery. Download THIS and exctract it to C:/. Open device manager in windows (Rigt click on Computer > Manage > Device manager) and connect your phone without the battery to pc via USB cable. Look in device manager for a new hardware connected, right click on it and click in update drivers. In the window open, select "Search for software driver in the computer" and in the window open select insert C:\fastboot\usb_drv_windows, tick the option "include subfolders" and advance. A pop up window may appear asking you if you do want to install the driver, choose YES and the drivers will install.
2. Navigate to the folder you extracted (C:/fastboot) and double click on start.bat. It will ask you for administrator privileges, just say yes.
3. Select your phone model (2 for P760, 3 for P765, 4 for P768 and 5 for P769). It will ask you to turn off your phone and remove battery. When you done with that, press enter. It will now ask you to insert USB cable with the phone without the battery and after 4 seconds re-insert the battery. Onde you done with that, it wil return a message to press any key. In this step the fastboot drivers may be installed again. Don't worry, it's normal
4. Remove the battery again, wait a few seconds and re-insert it.
5. Plug the USB cable in the phone with the battery in and let VOL UP pressed. The phone will enter in SW Update mode.
6. Follow THIS to reflash your rom. A list of avaiable official roms of different models is HERE. Remember to only flash roms made for your phone model or you may get some issues.
7. You're all done I recommend using THIS TWEAK, the phone becomes more responsive.
*** If you flashed a JellyBean rom (V20X.kdz) you can easily root with THIS and if you want CWM recovery use THIS ONE ------ REMEMBER NOT TO FLASH ANY CUSTOM ROM WITH THIS RECOVERY BECAUSE I'M CONSIDERING YOUR BOOTLOADER IS LOCKED AND FOR THIS REASON, YOU CANNOT FLASH CUSTOM ROMS WITH CWM, IT JUST DOESNT WORK!!!
Hope it help you
Click to expand...
Click to collapse
cant install fastboot drivers windows 10
hello everyone
how unlock bootloader on a tablet when it is not booting up. restarting again & again after displaying android logo??
anyone has know the method, plz help
thanx
raj1raj said:
hello everyone
how unlock bootloader on a tablet when it is not booting up. restarting again & again after displaying android logo??
anyone has know the method, plz help
thanx
Click to expand...
Click to collapse
You might get more luck if you at least tell people what tablet it is and what you did to get it in such a bad state.
tablet not booting
SimonTS said:
You might get more luck if you at least tell people what tablet it is and what you did to get it in such a bad state.
Click to expand...
Click to collapse
thanks for reply
my device is china MT6572 with android 4.2.2
I have use a very very very superb tool named "MtkDroidTools v2.48" and bricked my newly purchage tablet.
1. I click on root and happy thing is that tablet got rooted. wow
2. I have created backup from this tool and after few minutes, many *.img backup files are created on my pc and my tab's sdcard. wow again
3. After restarting the tab it restarting again & again and not booting. really a "heart attacking wow".
I have tried following steps
1. In default "android stock recovery 3e" trying to restore backup files and got message "installation aborted" everytime. same message from using "adb sideload command"
2. creating a scatter file from this tool and load backup in "SP_Flash_Tool_v5.1343.01" tool. but no any tool connect my tab. it says no device.
3. only "adb sideload" from stock recovery has the way to connect to the pc. but I don't know which kind of files are used at there??
During the backup process a log file created by MtkDroidTools has attached for details information.
then plz tell me. what I do for get again a "relaxed wow"??
Load scatter file and back up files in SP Flash tool. Power your tablet off, hit download button in SP Flash tool then connect tab to pc.
If you have the preloader driver installed SP flash tool should connect and start flashing firmware to phone. Do you hear the connecting sound when you connect powered off tablet to pc? If not, you may need to press and hold Vol Down, Vol up, or menu button while connecting tab to pc.
Hope this helps and good luck!
Sent from my SGH-I337 using xda app-developers app
tablet not booting
SimonTS said:
You might get more luck if you at least tell people what tablet it is and what you did to get it in such a bad state.
Click to expand...
Click to collapse
Klown80 said:
Load scatter file and back up files in SP Flash tool. Power your tablet off, hit download button in SP Flash tool then connect tab to pc.
If you have the preloader driver installed SP flash tool should connect and start flashing firmware to phone. Do you hear the connecting sound when you connect powered off tablet to pc? If not, you may need to press and hold Vol Down, Vol up, or menu button while connecting tab to pc.
Hope this helps and good luck!
Sent from my SGH-I337 using xda app-developers app
Click to expand...
Click to collapse
Thanks a lot sir
but my tab has no menu button, only have three hard buttons.
pressing
power + volup = stock recovery
power + voldown= nothing happen
power + volup + voldown = poweroff tab
when I connect the tab to pc in power off mode. The tab automatically startup after a charging logo.
I have preloader drivers on my pc but when turn on the tab. it is appearing in device manager (preloader composite) for only 2-3 seconds. and disconnected. because tablet rebooting again. I can't install preloader drivers in this short time.
plz suggest.
raj1raj said:
Thanks a lot sir
but my tab has no menu button, only have three hard buttons.
pressing
power + volup = stock recovery
power + voldown= nothing happen
power + volup + voldown = poweroff tab
when I connect the tab to pc in power off mode. The tab automatically startup after a charging logo.
I have preloader drivers on my pc but when turn on the tab. it is appearing in device manager (preloader composite) for only 2-3 seconds. and disconnected. because tablet rebooting again. I can't install preloader drivers in this short time.
plz suggest.
Click to expand...
Click to collapse
Ok, no need to hit a combo of buttons, only 1 button you need to press while connecting tab to PC. Please retry following the directions from my last post again
Yes, preloader will only show for a few seconds in device manager before it turns off. Preloader is only for reflashing firmware. When it enables itself, it is looking for the SP FT (or other firmware flashing programs) to be there to catch it, if not preloader shuts itself off.. Your download of SP Flash Tool should have included the needed preloader drivers. Then you load files in SP FT and hit download button then connect tab to PC.
tablet not booting ----solved
Klown80 said:
Ok, no need to hit a combo of buttons, only 1 button you need to press while connecting tab to PC. Please retry following the directions from my last post again
Yes, preloader will only show for a few seconds in device manager before it turns off. Preloader is only for reflashing firmware. When it enables itself, it is looking for the SP FT (or other firmware flashing programs) to be there to catch it, if not preloader shuts itself off.. Your download of SP Flash Tool should have included the needed preloader drivers. Then you load files in SP FT and hit download button then connect tab to PC.
Click to expand...
Click to collapse
Thank you very very very very much. Finally I have got a wow.
After many efforts, I resolved the tablet booting issue. It is possible due to only your valuable suggestion.
steps are here:
1. connect tab to pc & installing preloader usb drivers.
2. getting VID & PID of tablet usb connection.
3. modifying "SP FT settings files" with new values of my tab.
4. creating a scatter file from droid tool & load in SP FT.
5. Flashing backup to the tab successfully.
You are such a genius. I have been wasted a lot of time since a week for getting the right answer. During this period I had connected to many android experts at many sites. but no satisfaction answer.
And u are really amazing. You have got the real problem in only three conversation. really great.
Well I m a windows expert. If u feel any technical problem regarding servers or windows, ask me, I will try my best.
I am launching a website soon named "GeniusPepoleofWorld.com". Many technical experts & genius people will listed there in different categories like Android experts, Windows experts, Linux Experts, Robotics Experts, Electronics xtra xtra. I want to add you at top there in Android Expert list. Now site is under constructions. I want to know your name & personal mail-id like gmail etc. When I will finish my site, I will inform you.
One more thing I want to know that "what is the use of stock recovery & adb sideload, which files types are used with it?"
Plz plz reply this with your name and mail-id.
Thanks a lot again
-----------
Regard
Raj
Sr. Server Engineer
Delhi, India
raj1raj said:
Thank you very very very very much. Finally I have got a wow.
After many efforts, I resolved the tablet booting issue. It is possible due to only your valuable suggestion.
steps are here:
1. connect tab to pc & installing preloader usb drivers.
2. getting VID & PID of tablet usb connection.
3. modifying "SP FT settings files" with new values of my tab.
4. creating a scatter file from droid tool & load in SP FT.
5. Flashing backup to the tab successfully.
You are such a genius. I have been wasted a lot of time since a week for getting the right answer. During this period I had connected to many android experts at many sites. but no satisfaction answer.
And u are really amazing. You have got the real problem in only three conversation. really great.
Well I m a windows expert. If u feel any technical problem regarding servers or windows, ask me, I will try my best.
I am launching a website soon named "GeniusPepoleofWorld.com". Many technical experts & genius people will listed there in different categories like Android experts, Windows experts, Linux Experts, Robotics Experts, Electronics xtra xtra. I want to add you at top there in Android Expert list. Now site is under constructions. I want to know your name & personal mail-id like gmail etc. When I will finish my site, I will inform you.
One more thing I want to know that "what is the use of stock recovery & adb sideload, which files types are used with it?"
Plz plz reply this with your name and mail-id.
Thanks a lot again
-----------
Regard
Raj
Sr. Server Engineer
Delhi, India
Click to expand...
Click to collapse
I am happy to hear it worked for you. Nice job Raj! I am just passing on the knowledge I learned here on XDA (Thank @rua1 he made MTK DroidTools and without that tool alot of folks with MTK devices wouldn't have root, stock firmware back up files, or working recovery
Anyhow, as for your last 2 questions. Stock recovery is used for flashing officially signed update files from your device manufacturer (If they were to make an update that is lol) This is how all android devices are able to accept ota updates, they download the file to phone/tablet then reboot into recovery and then it flashes the downloaded file to the device.
Adb sideload allows you to connect the device to a PC and then upload a firmware file to device to be flashed via recovery instead of downloading it directly to the phone. This is useful if you had an officially signed stock firmware file for your device stored on your pc. Some custom recoveries also allow you to use adb sideload but since you have stock recovery you would be restricted to using only officially signed files.
Say for instance you were not able to get your device to boot properly, you would just need to boot tablet into recovery mode and then choose adb sideload. At this point you would connect tab to PC and then put your firmware file in the same folder you have adb.exe in. (Let's call the firmware file "firmware.zip" in this example) Then open command prompt in same folder that adb.exe is in and type "adb sideload firmware.zip" this would push the firmware.zip file to the device then flash it for you.
Since you were able to use MTK Droidtools to get root then make a back up, you should be able to also use it to make a custom recovery for your device too. When you made the back up, it will usually make 2 back ups, one on your pc that you use SP FT to flash files and restore your device then it also makes a back up on your devices sd card that is flashed through custom recovery to restore your device. This would make restoring your device pretty easy if you need to do so again and it will also allow you to restore without needing a PC to do it.
Hope this helps!
Kevin
raj1raj said:
Thank you very very very very much. Finally I have got a wow.
After many efforts, I resolved the tablet booting issue. It is possible due to only your valuable suggestion.
steps are here:
1. connect tab to pc & installing preloader usb drivers.
2. getting VID & PID of tablet usb connection.
3. modifying "SP FT settings files" with new values of my tab.
4. creating a scatter file from droid tool & load in SP FT.
5. Flashing backup to the tab successfully.
You are such a genius. I have been wasted a lot of time since a week for getting the right answer. During this period I had connected to many android experts at many sites. but no satisfaction answer.
And u are really amazing. You have got the real problem in only three conversation. really great.
Well I m a windows expert. If u feel any technical problem regarding servers or windows, ask me, I will try my best.
I am launching a website soon named "GeniusPepoleofWorld.com". Many technical experts & genius people will listed there in different categories like Android experts, Windows experts, Linux Experts, Robotics Experts, Electronics xtra xtra. I want to add you at top there in Android Expert list. Now site is under constructions. I want to know your name & personal mail-id like gmail etc. When I will finish my site, I will inform you.
One more thing I want to know that "what is the use of stock recovery & adb sideload, which files types are used with it?"
Plz plz reply this with your name and mail-id.
Thanks a lot again
-----------
Regard
Raj
Sr. Server Engineer
Delhi, India
Click to expand...
Click to collapse
I've got the exact same problem with my phone... My phone, Celkon A15 (Indian brand) also has the same chipset number and while trying to root using MTKdroids tool, I have managed to get it in the boot looping stage.
I'm just curious on how you managed to get the pre-loader installed for this? I CAN NOT get the SP Flash tools to detect my phone for the life of me. Also, when I load my scatter file, it has the "PRELOADER" section in RED... and when I try to upload the preloader.bin from my backup files, it says... "Load file "*path name*" fail!"
I am still struggling to understand how the SP Flash tool works and if it would be able to get my phone alive again (well it did help you out, so I am bit optimistic).
Please HELP!
device not booting
kbrahma said:
I've got the exact same problem with my phone... My phone, Celkon A15 (Indian brand) also has the same chipset number and while trying to root using MTKdroids tool, I have managed to get it in the boot looping stage.
I'm just curious on how you managed to get the pre-loader installed for this? I CAN NOT get the SP Flash tools to detect my phone for the life of me. Also, when I load my scatter file, it has the "PRELOADER" section in RED... and when I try to upload the preloader.bin from my backup files, it says... "Load file "*path name*" fail!"
I am still struggling to understand how the SP Flash tool works and if it would be able to get my phone alive again (well it did help you out, so I am bit optimistic).
Please HELP!
Click to expand...
Click to collapse
Hi
1. First you have connect your device to pc.
2. you have to open the device manager and keep your eyes on a new hardware found at device manager, when you start up your device.
3. Preloader will only show for a few seconds in device manager before it turns off.
3. install preloader drivers.
4. open SP Flash tool and load scatter file and set path for your backup files.
5. Click download button and reboot your device.
6. Software will catch your device and finally backup will be restored to your device.
I too have got same problem, i have infocus m2 with mt6582, i rooted with kingroot n used mtk droid tools for backup.after backup i tried to modify boot img and install cwm using mtk tools but now it wont boot up, nor it enters recovery mode, i tried to flash stock boot and recovery img through sp flashtool but its giving error (2004), plz help me plzzzz....
Okay guys, I think my phone has a soft brick (no boot logos), so I'm trying to do some restoration... but I'm not having much success.
So, I found a solution in XDA (/showthread.php?t=825173&page=3) saying that I should plug my phone in without battery, SD nor chip and disable the "LG Modem" on my Device Manager. Afterwards, start KDZ Updater and configure it to CS_EMERGENCY. Then I should install a 2.1 French firmware and as soon as KDZ finishes I'd plug off my phone, plug it back in and start it in DL mode again, this time flashing a file named "OUT.kdz", which gives back the boot logos.
Problem: KDZ Updater hangs as soon as I press "Start". It simply freezes when it's in CS_EMERGENCY. I have no solution to this whatsoever, and I also have another thread with previous problems I ran into (Soft-Bricked LG GT540 Optimus).
These are the best forums I've found for any kind of phone, so I'm positive I'll get the help I need, even if I might need to wait some time. Kudos to the admins and every member for taking part of such a great community!
Ebony Dubois said:
Okay guys, I think my phone has a soft brick (no boot logos), so I'm trying to do some restoration... but I'm not having much success.
So, I found a solution in XDA (/showthread.php?t=825173&page=3) saying that I should plug my phone in without battery, SD nor chip and disable the "LG Modem" on my Device Manager. Afterwards, start KDZ Updater and configure it to CS_EMERGENCY. Then I should install a 2.1 French firmware and as soon as KDZ finishes I'd plug off my phone, plug it back in and start it in DL mode again, this time flashing a file named "OUT.kdz", which gives back the boot logos.
Problem: KDZ Updater hangs as soon as I press "Start". It simply freezes when it's in CS_EMERGENCY. I have no solution to this whatsoever, and I also have another thread with previous problems I ran into (Soft-Bricked LG GT540 Optimus).
These are the best forums I've found for any kind of phone, so I'm positive I'll get the help I need, even if I might need to wait some time. Kudos to the admins and every member for taking part of such a great community!
Click to expand...
Click to collapse
I've fixed all my issues! I'll paste what I said in another thread. Yay for one-full-year struggles!
Just wanted to leave my 2 cents here, I've been trying to do my best since around august 2014, no success. 2 days ago I retried this, and I DID IT! I will tell everyone what I did very shortly:
My problem that I solved: I can boot, device works like a charm. But: no boot logos, no recovery.
My solution for TL;DR: UNINSTALL ALL DRIVERS FROM DEVICE MANAGER 1ST, then reinstall. After that, flash a fastboot ROM and use it to WIPE ALL THE DATA IN YOUR PHONE! THIS was what I needed and was never explained: you had to WIPE the old data in order to get the boot screens back.
IN THIS ORDER (THANK YOU to those people from previous replies, gathering all your info was of great value):
Uninstall all of your phone drivers from your PC!!! This is what made most of my headaches go away, just use Device Manager and uninstall anything from LGE. After that, plug in your device in your USB ports (always BACK ports, not front ports, important). It should detect all drivers and download them.
IF it fails (it generally does with LGE USB Modem), you can go to Device Manager > Unknown Device (the one that wasn't recognized) > Right Click and Update > Choose 2nd option, then choose "choose from a list of local controllers" (or whatever the button says). After that, scroll down to LG Electronics, Inc. and install what didn't install.
I also found these drivers, but I did not test them: http://www.mediafire.com/download/p693hcz6kkouh19/USB_Driver_LG_GT540.zip
Huzzah!
Now you're set to begin:
FIRST thing you wanna do is a factory reset, this is something I'd forgotten with time, don't make the same mistake as I did. You can do it by turning your phone on and pressing Volume +/- & Home & Quick Search buttons all together for 5 seconds (it works, be patient and wait for it, even if you open the camera or any other stuff).
Download this Google SDK Tools (unzip and put the folder in C:\ drive) and this Fastboot drivers for GT540 (unzip and put the files inside the folder in C:\android-sdk).
Skip this next line if you know your ROM has fastboot.
Now, if you don't have a ROM with fastboot, I recommend you use either European Open+Fastboot or V20C Orange France Fastboot ROM.
Click to expand...
Click to collapse
Since you have Fastboot enabled, now all you need to do is turn off your device (all this with its battery on it, no weird things) and hold the Camera button before turning it back on. This should take you either to a black screen, or simply to no display, like me. Either one will work anyways.
Now press the Windows key > Type cmd and open it with Right Click > Run as Administrator.
In it, type all this, command by command (you can paste by right clicking):
cd C:\android-sdk
fastboot -w
fastboot erase boot
fastboot erase system
fastboot -w
fastboot reboot
Click to expand...
Click to collapse
And now it's go time! Do what everyone else says in here: Take out your phone's battery, SD and SIM cards, fire KDZ Updater up as Administrator (If your KDZ freezes, then it's either faulty or you did not install msxml, look for a good KDZ that comes with that file and delete your current one), choose CS_Emergency PhoneMode and:
1-Plug your phone while holding the volume DOWN button (don't worry! My phone didn't show "Download Mode" either, if you hear the Windows "Somethingpluggedin" Bump noise, it's ok).
2-Flash French V20A
3-Unplug your phone once KDZ says "==FINISHED==".
4-Plug it once again, holding the volume DOWN button.
5-Flash out.kdz (remember! it's CS_Emergency).
Click to expand...
Click to collapse
THANK YOU XDA!
After seeing SO many frustrated people asking how to do this and never really getting a good answer, i decided to make a useful and easy guide.
Things you need
ADB drivers installed and working
Lenovo usb driver
MTK driver
(Windows will most likely install Lenovo and MTK drivers by itself, if not, search google for ''MTK Drivers'' and Lenovo ''USB drivers'', download and install.
Go To Needrom and download both AP and CU official roms
Same place find a TWRP recovery under one of the X2 roms
SP Flash tool (again, Google it) download and install
If any of these things make you think *Whaaat?* then do some more reading, before continuing!
And on with it!
Attention
Save everything you have on your phone you dont what to have deleted, because it will disappear!
Extract both of the Roms you downloaded previously, and for convenience put them side-by-side on your desktop.
Make sure your phone is adaquetly charged everything above ~60%
Turn your phone off and DONT choose ''fast boot up''
Make sure the phone is not plugged in the computer just yet
Open up SP Flashtool
At the top, press options -> option -> download, check both boxes.
Close the option window again
Leave the ''download agent'' be! It should look like this C:\where you installed\SP_Flash_Tool_v5.1524.00.000\MTK_AllInOne_DA.bin
Now press the button that says ''scatter loading'' And navigate to your desktop where we extracted the ROMS earlier and into the AP ROM folder from there choose ''Target_bin'' and then ''MT6595_Android_scatter.txt''
Example of How it should look like:
C:\Users\Yourname\Desktop\X2-AP_ROW_S130_150412\target_bin\MT6595_Android_scatter.txt
Critical!Make sure the next drop down menu says ''Firmware Upgrade'' if you choose ''Format all + download'' you lose you IMEI and MAC Address, if that happens prepare yourself for looong nights of google'ng :laugh:
Now we're ready to flash!
Press the big Download button with the green arrow and plug your (turned off) phone into you PC (IN THAT SPECIFIC ORDER, YES!), with some luck and driver cooperation it all works
SP flashtool should now begin to burn the new ROM to your phone, and it will take awhile so be patient.
if nothings happens at all make sure your phone was completely turned off without choosing ''Fast Bootup'' and that you installed your drivers correctly.
When The Flashing is done SP flashtool will display a ''Download OK'' or similar
After that just close all SP Flashtool windows completely and unplug your phone
Boot it up to check that its working, if not you did something wrong, try again.
Congratulations! Now you hopefully have a ROW ROM on your your phone!
Unfortunately Your Radio dosen't work, that's because the Chinese phones have a different Modem then the ROW versions.
So lets fix that!:good:
Open up SP Flashtool again
make sure the boxes in options -> option is still checked!
Press the scatter loading button again
but this time navigate to to place where you downloaded and extracted your TWRP recovery folder.
In this folder there is also Scatter loading file, choose that
notice that the only thing checked now is the recovery box
Again make sure the drop down menu says ''Firmware upgrade''"!
Now same procedure as last time, with turned off phone, press the download button and connect phone
SP Flashtool will flash the Recovery files and ultimately say ''Download OK''
Close the window and unlug phone.
Now press the power button and both volume buttons at once, when the phones vibrates and/or when the lenovo logo shows release the power button but not the volume buttons
when the recovery screen appears release at will :silly:
Now plug in your phone and navigate to your phones internal storage then to ''Download'' folder
Now from the CU Version ROM you previously downloaded navigate to:
\modemdb\mt6595k95_hspa_lwg_cu
the two files called ''catcher_filter_1_lwg_n'' and ''modem_1_lwg_n'' are our modem files.
Now move these two files to the ''download'' folder in your phones internal storage.
When done unplug the phone again and continue from TWRP
Mount -> ''Check all'' -> ''press back button''
''Advanced'' -> ''File manager'' -> sdcard -> Download -> ''click on one of the files you put there'' -> ''Move'' -> system -> etc -> firmware -> ''select'' -> ''swipe to confirm''
Now do that for the last file to, now you dont have to navigate to the ''firmware'' folder as when you press move on the next file it should be there already, so just press select.
now go back to the file manger and navigate to the ''firmware'' folder find both files you put there and select them then press ''CHMOD 755'' this tells ROOT that you have permissions to Read and Write them.
After that go all the way back and press Reboot -> system,
The recovery will then ask if you want to ROOT it, DONT Root IT! if you do the phone wont Boot!
Wait for the start up and enjoy your working phone!
If the phone tells you there is a update for it, dont install it the conventional way, as TWRP can't install the updates that way.
and if you flash Stock recovery and then update, your phone will update just fine but you'll have to move the modem files again, since the update checks the phone and sees something is wrong (the CU modem files dosen't match the checksum)
and will overwrite our CU modem files.
There's probably a lot of typos in this, bear with me, its late at night.
Disclaimer: If you dont know what your'e doing, then dont do it...
Made by Mikkel jacobsen
This is for the X2Pt5?
Thanks!
Very useful post.I've had a X2 with CU older version modified from Needrom but wasn't satisfied.
This one seems allright.
Thanks.
L.e. Still i have a problem with the radio thing.
In fact you make a mistake. Instead of ''Firmware upgrade''you must select ''Download only'' on flash tool at radio fix otherwise it will brick the phone.
Hi All,
Really annoying self inflicted problem, changed the swipe code, forgot it, google account ADM wont reset phone, no sequence of button pressing gets phone into recovery mode, USB debugging appears to be off. How can I save my phone??!??!?!?!? What sequence should I follow, what ROM should I install, need a step by step if at all possible, complete newbie!!1? Thanks in advance.
Jacko110 said:
Hi All,
Really annoying self inflicted problem, changed the swipe code, forgot it, google account ADM wont reset phone, no sequence of button pressing gets phone into recovery mode, USB debugging appears to be off. How can I save my phone??!??!?!?!? What sequence should I follow, what ROM should I install, need a step by step if at all possible, complete newbie!!1? Thanks in advance.
Click to expand...
Click to collapse
ok you are most likely on 20160810 where recovery does not work.
you are most likely on windows 10 as well. first lets find a rom where recovery works.
We can use 20160810 rom and wipe userdata partition..
Here is the download link https://mega.nz/#!ys4DTIxa!8rrL0aktVQ8W7Q4Et8fvQ8jk2tAxLZvJOJH48S9Vkyk .
Once you have finished downloading you should then extract it to a folder.
Next we need to prepare your computer for the flashing process by installing the correct drivers.
look in this thread http://forum.xda-developers.com/elephone-p9000/how-to/how-to-guideline-install-mtk-drivers-t3344042 scroll for your version of windows. follow the instructions and everything should work.
If you dont have add hardware option in windows then hit windows button and r and enter hdwwiz.exe.
now you have installed the drivers we need to download sp flash tools which is what we need to install the rom.
So go this website http://spflashtool.com/ now click on the first download link 'SPFlash Tool 5.1628' .
this will download a zip file. again extract it to a new folder. ok now you need to go in the flash tool and run flash_tool.exe by just clicking on it. now the software will load up.
You need to load the scatter file from the rom folder. The scatter file should be outside the encrypt folder and should be called MT6755_Android_scatter.txt . Now the rom should be loaded. You have some more options here, you can either untick all boxes and leave userdata (where your security and codes are stored) ticked or you can leave everything ticked which would flash the rom again. So once you have decided what option you have you need to turn your phone off. you then need to click download in flash tools and then connect your phone to the pc and hold the vol+ button. Then wait for it to flash, once the box with the tick opens you can close the program and restart your phone.
no recovery
there is no recovery in this build.........you have to flash one of your own.....
No recovery
Thank you, will start trying now and let you know.
Success!
Pro4TLZZ said:
ok you are most likely on 20160810 where recovery does not work.
you are most likely on windows 10 as well. first lets find a rom where recovery works.
We can use 20160810 rom and wipe userdata partition..
Here is the download link https://mega.nz/#!ys4DTIxa!8rrL0aktVQ8W7Q4Et8fvQ8jk2tAxLZvJOJH48S9Vkyk .
Once you have finished downloading you should then extract it to a folder.
Next we need to prepare your computer for the flashing process by installing the correct drivers.
look in this thread http://forum.xda-developers.com/elephone-p9000/how-to/how-to-guideline-install-mtk-drivers-t3344042 scroll for your version of windows. follow the instructions and everything should work.
If you dont have add hardware option in windows then hit windows button and r and enter hdwwiz.exe.
now you have installed the drivers we need to download sp flash tools which is what we need to install the rom.
So go this website http://spflashtool.com/ now click on the first download link 'SPFlash Tool 5.1628' .
this will download a zip file. again extract it to a new folder. ok now you need to go in the flash tool and run flash_tool.exe by just clicking on it. now the software will load up.
You need to load the scatter file from the rom folder. The scatter file should be outside the encrypt folder and should be called MT6755_Android_scatter.txt . Now the rom should be loaded. You have some more options here, you can either untick all boxes and leave userdata (where your security and codes are stored) ticked or you can leave everything ticked which would flash the rom again. So once you have decided what option you have you need to turn your phone off. you then need to click download in flash tools and then connect your phone to the pc and hold the vol+ button. Then wait for it to flash, once the box with the tick opens you can close the program and restart your phone.
Click to expand...
Click to collapse
Thank you soo much, all sorted. Take it that I can now use these tools and newly gained knowledge to upgrade OS???
Jacko110 said:
Thank you soo much, all sorted. Take it that I can now use these tools and newly gained knowledge to upgrade OS???
Click to expand...
Click to collapse
You can but be careful as you could damage your phone
Has anyone got a link to a custom recovery I can flash on to p9000 running latest ROM
haidar123 said:
Has anyone got a link to a custom recovery I can flash on to p9000 running latest ROM
Click to expand...
Click to collapse
http://forum.xda-developers.com/ele...nofficial-twrp-elephone-p9000-t3426678/page11 use a p9000 scatter file
Hi,
I have the same problem with my P9000 : Elephone_P9000_20160810, I even cannot install the last update 20170112 because the recovery mode is not working. but I use Linux mint on my laptop.
I already downloaded the Linux version of the flashing tool, give it a try but at the time of the flashing my laptop freeze. Scarred to death, I restarted my phone, no damage done, but now, after stay away from the idea the time to recover from my post traumatic syndrome disorder, I am ready to try again with the help of peoples knows what they are doing.
What are the points I have to be aware using Linux mint when I follow this tutorial.
Thanks for your time
New Recovery File
Need to use this one. I had the same problems https://redirect.viglink.com/?format=go&jsonp=vglnk_148541845062211&key=f0a7f91912ae2b52e0700f73990eb321&libId=iye3se1601000n4o000DA1jol7bnvwro0d&loc=https%3A%2F%2Fforum.xda-developers.com%2Fsitesearch.php%3Fq%3Dp9000%2520twrp%2520unofficial&v=1&out=https%3A%2F%2Fwww.google.com%2Furl%3Fq%3Dhttps%3A%2F%2Fforum.xda-developers.com%2Felephone-p9000%2Fdevelopment%2Frecovery-unofficial-twrp-elephone-p9000-t3426678%26sa%3DU%26ved%3D0ahUKEwiR2N_0rt_RAhUF5xoKHQaCAEUQFggEMAA%26client%3Dinternal-uds-cse%26usg%3DAFQjCNEDufTDo_BhHEYeYoUxe8gtq12xsw&title=General%20Search&txt=%5BRECOVERY%5D%20%3Cb%3EUnofficial%20TWRP%3C%2Fb%3E%20for%20Elephone%20%3Cb%3EP9000%3C%2Fb%3E%203.0.2-8
As someone who has done this a few times - and forgotten this vital step almost every time, just a reminder that when using SPFlash Tool - after you set up the scatter file, you click on download so that it is trying to communicate with the phone before you even plug the cable into the phone, then with your phone turned off you hold Vol+ as you plug in the cable. It should send the file almost instantly.