Dear All
My Ideos slim 7 touchscreen is not working since a few days, and the usb debugging mode is OFF
I tried to re-install many firmwares ( the original one, MTN firmware etc), but the problem persists
is there a way to turn the usb debugging mode to ON from the computer so that I can use the fastboot ?
Thank you
BR
Touch screen issues
Zimsana said:
Dear All
My Ideos slim 7 touchscreen is not working since a few days, and the usb debugging mode is OFF
I tried to re-install many firmwares ( the original one, MTN firmware etc), but the problem persists
is there a way to turn the usb debugging mode to ON from the computer so that I can use the fastboot ?
Thank you
BR
Click to expand...
Click to collapse
I have the same problem. What I did was connect a wired keyboard to my s7 slim(with micro usb adaptor). Most keys won't respond. Press the F1 key, a menu at the bottom of the screen pops up. Scroll using the arrow keys to settings. In the application section using the arrow keys scroll down to developement mode and press enter on the keyboard. You then use to check debugging mode. When you are done, press the home key and it will take you back to the home screen. To shut down press the power button, scroll down, press shut down and hit enter on your keyboard. I was able to activate debugging mode and root my tablet, but after reinstalling the firmware my screen still does not respond.
I have a china tablet
it have only power button and 2 soft touch keys.
and when case is opened there is a button when i press tablet power will go thats it
the tablet is pattern locked, unfortunately adb is not enabled, how can i access recovery so i can resset the tablet
tablet model itouch i704
it have rockchip 2906
thanks in advnce
itouch i704
Dear admin, am also having the problem of itouch i 704, pls help me how to hard reset this tablet or give any flashing solution... waiting for ur reply.......
same problem
i have also a tablet of same brand "itouch" model number unknown and pattern locked, debugging mode is disabled, do not know how to go in recovery mode. help me how can i access recopvery mode
To get into recovery on i touch i704 tab
1.turn off device
2.leave 30-45 seconds
3.press and hold volume down + power button.
Hey guys,
Iv got a stock US tablet Z, SGP311 on 10.4.1.b.0.109
Iv tried holding power and volume + while booting to get into stock recovery, iv tried tapping Vol+ a few times while booting, iv tried holdin Vol+ for 3 seconds and then hitting power......i cant get this damn thing into recovery!
Can someone help??
Snazarian said:
Hey guys,
Iv got a stock US tablet Z, SGP311 on 10.4.1.b.0.109
Iv tried holding power and volume + while booting to get into stock recovery, iv tried tapping Vol+ a few times while booting, iv tried holdin Vol+ for 3 seconds and then hitting power......i cant get this damn thing into recovery!
Can someone help??
Click to expand...
Click to collapse
There is no Recovery Mode in the XTZ's stock firmware. Here is how to access the available functions of the stock firmware.
1. Power On
Press and hold the POWER button until notification light flashes once, then release POWER button.
2. Power Off
Press and hold the POWER button until menu appears, then select "Power off" and "OK".
3. Restart
Restart device to turn off all running applications and to free up memory.
3.1. Simultaneously press and hold the VOLUME UP and POWER buttons for 10 seconds.
3.2. After the notification light flashes three times, release the buttons.
3.3. The device will power off automatically.
3.4. After the device is powered off, power on the device.
4. Reset
Reset device to its original settings to free up memory.
Don't forget to back up any important data saved on the device!
4.1. Go to Settings > Backup & reset > Factory data reset > Reset tablet.
5. Enable Safe Mode
5.1. Power off the device.
5.2. Press and hold the POWER button until the notification light flashes once.
5.3. Wait until the Xperia™ logotype disappears.
5.4. Press and hold the VOLUME DOWN button.
5.5. The device will restart in Safe Mode.
5.6. To exit Safe Mode, restart the device.
6. Flash Mode
6.1. Power off the device.
6.2. Connect a USB cable to the device.
6.3. Press and hold the VOLUME DOWN button.
6.4. Connect the USB cable to a computer.
6.5. Wait until the notification light flashes red-green once, then release VOLUME DOWN button.
6.6. To exit Flash Mode, disconnect the USB cable.
7. Fastboot Mode.
7.1. Power off the device.
7.2. Connect a USB cable to the device.
7.3. Press and hold the VOLUME UP button.
7.4. Connect the USB cable to a computer.
7.5. Wait until the notification light flashes red then solid blue, then release VOLUME UP button.
7.6. To exit Fastboot Mode, disconnect the USB cable.
8. Service Menu
8.1. Start the Contacts app.
8.2. Go into Settings.
8.3. Touch the blank area at middle bottom of screen for at least five seconds then stop touching screen.
8.4. "Enter service mode" button will be displayed.
8.5. Press the "Enter service mode" button.
8.6. Enter *#*#7378423#*#* (*#*#SERVICE#*#*).
8.7. Service menu will be displayed.
8.Notes.1. Enter *#*#4636#*#* (*#*#INFO#*#*) to display testing information.
8.Notes.2. Enter *#*#73556673#*#* (*#*#SELLMORE#*#*) to toggle Demo Mode activation on/off. WARNING! Activating Demo Mode will delete all personal content (photos, etc.) and settings.
How do you flash CM then ?
Cat McGowan said:
There is no Recovery Mode in the XTZ's stock firmware.
Click to expand...
Click to collapse
Thanks for telling ! I had been looking for this information for a long time.
Apparently, my service info says "bootloader unlock allowed: yes", I wonder if it means that I actually unlocked it or that the device would accept me to do it.
I moreover wonder how one can manage to install CM or root its device without using Recovery Mode. I saw on your signature you rooted your device. May I ask how you did that ?
ducasse.isidore said:
Thanks for telling ! I had been looking for this information for a long time.
Apparently, my service info says "bootloader unlock allowed: yes", I wonder if it means that I actually unlocked it or that the device would accept me to do it.
I moreover wonder how one can manage to install CM or root its device without using Recovery Mode. I saw on your signature you rooted your device. May I ask how you did that ?
Click to expand...
Click to collapse
It means your bootloader CAN BE unlocked.
To install a ROM, such as CM, you first unlock your bootloader, then move the ROM zip to your device. After that, you flash the included kernel from the zip with fastboot. Then, you boot into the included recovery from the kernel and flash the whole ROM.
Sent from my LT26i using Tapatalk
Felimenta97 said:
It means your bootloader CAN BE unlocked.
To install a ROM, such as CM, you first unlock your bootloader, then move the ROM zip to your device. After that, you flash the included kernel from the zip with fastboot. Then, you boot into the included recovery from the kernel and flash the whole ROM.
Sent from my LT26i using Tapatalk
Click to expand...
Click to collapse
I finally found a solution to my problem : I unlocked the device using flashtool-0.9.11's gui procedure, instead of flashtool's fastboot. It succeeded and I can successfully flash anything I want on the device.
I found your rational approach to my problem useful. It helped me isolate a solution. Thanks !
Hi there
I know this is an old thread. But my problem is same. I got this devide called sony experia tablet z lte ntt docomo x variant
My problem is that it got a lock screen and i have forgot the password. So i want to reset it.
But the problem is how do i do that, there isnt a recovery on this thing.
I was playing around with the buttons and i dont know how ,or which combination i pressed the tab booted to a factory reset screen but i wanst sure to reset that time so i exited from that and tablets lock screen appeared.
And now i cant figure out that how to do this again. Please help me
......
Hi there
I know this is an old thread. But my problem is same. I got this devide called sony experia tablet z lte ntt docomo x variant
My problem is that it got a lock screen and i have forgot the password. So i want to reset it.
But the problem is how do i do that, there isnt a recovery on this thing.
I was playing around with the buttons and i dont know how ,or which combination i pressed the tab booted to a factory reset screen but i wanst sure to reset that time so i exited from that and tablets lock screen appeared.
And now i cant figure out that how to do this again. Please help me
......
Press and hold the Power and Volume Down keys for 10 seconds.
The device will reset and restart.
Hi guys,
I've got an Onda v975s tablet and it's been a pain to sort out. I've forgot the pass code, the tablet doesn't have USB debugging enabled and there is no way I can enable it because I can't get past the lock screen. Also to make matters worse, every key combination I try does absolutely nothing, the tablet just boots up like normal to present with the lock screen. The only key combination that does something is, holding the power button + volume down keys and that just loads the tablet up in safe mode.
Is there anyway I can resolve this problem?
Kind regards,
Hmoh
Hi everyone, I'm a new xda user.
I have a big problem with a Huawei Mediapad T3 7" BG2-U01.
My friend doesn't use it very often and he forgot the password.
The real problem is that seems like this tab doesn't have a recovery or a dload mode.
I tried all the combinations of the buttons but the recovery(MIUI), the dload mode and the chinese recovery don't work, there's only a reboot to the lockscreen.
He never enabled the Debug USB, so ADB and the pc don't see the device.
Is there any chance to do an Hard Reset or unlock the tab?
Thanks for helping me
Hard reset or Stock Recovery:
· off Tab
· Press power button for only 2 sec then release
· Immediately press hold volume up until Huawei logo appears