Hi everyone, I'm a new xda user.
I have a big problem with a Huawei Mediapad T3 7" BG2-U01.
My friend doesn't use it very often and he forgot the password.
The real problem is that seems like this tab doesn't have a recovery or a dload mode.
I tried all the combinations of the buttons but the recovery(MIUI), the dload mode and the chinese recovery don't work, there's only a reboot to the lockscreen.
He never enabled the Debug USB, so ADB and the pc don't see the device.
Is there any chance to do an Hard Reset or unlock the tab?
Thanks for helping me
Hard reset or Stock Recovery:
· off Tab
· Press power button for only 2 sec then release
· Immediately press hold volume up until Huawei logo appears
Related
This way is only work for original condition HP 7 voicetab 1321 ra with problem :
- forgotten password or screenlock
- no recovery (show android bot with no command)
- no need to flash
after trying for 3 days work. now problem is solved
1). shutdown device
2) press vol + and power button (until show select boot mode)
3) choose uart mode
4) in green button choose "factory setting"
then OK.
now your device has back to factory setting as one new
to enable Developer Options submenu(USB Debugging) on Android 4.2/Android 4.3/Android 4.4:
Go to Settings menu on your device.
Go to About submenu. In some devices the About submenu will be under “More”/”General” submenu. On some other devices (mostly HTC devices you will have to goto Settings> About> Software Information> More)
Now scroll to “Build Number” and tap it 7 times.
After tapping 7 times you will see an alert saying “You are now a developer”/”Developer mode has been enabled”.
Now if you go to your Settings menu, you will see the developer options submenu over there.
Tap on the Developer options and then turn on USB Debugging.
So I hope I have helped you. Let me know if you have any doubts.
I am getting error as 'Can't connect to camera' please help providing stock rom or firmware for HP 7 Voicetab 1351ra... I have tried the support forum link but that rom didn't work as its updated rom having build ver 1.01.08 something and I need 1.01.06... please help..
try to remove sd card, maybe the problem was on sdcard, I've found same problem on samsung galaxy grand prime.
my voicetab 7 can not enter any mode.
it just keep restarting on and on
any suggestion how to fix this?
i cant access the recovery mood.. its showing no command....my device is also hp7 voice tab.. pls help me..
Power off your tab, then press & hold power and volume up. Select recovery mode, you'll see no command with the dead android guy on it. Now press power and volume up once again. Now you're in the stock recovery menu
But if you are planning to install a custom rom on it there are some problem. First you have to unlock the boot loader, you can do it by installing android sdk on your pc.
The second problem which you're gonna face is there is no custom recovery made for this device. So its lillte tricky process.
rishavthepunk said:
Power off your tab, then press & hold power and volume up. Select recovery mode, you'll see no command with the dead android guy on it. Now press power and volume up once again. Now you're in the stock recovery menu
But if you are planning to install a custom rom on it there are some problem. First you have to unlock the boot loader, you can do it by installing android sdk on your pc.
The second problem which you're gonna face is there is no custom recovery made for this device. So its lillte tricky process.
Click to expand...
Click to collapse
My HP 7 voicetab sucks on HP logo,
I installed update.zip but in vain. Is it hardware issue or software issue.
Can anyone please help me for a solution to recover my phone from it's bootloop state, I tried factory reset from stock recovery but it doesn't help, phone still unable to boot to homescreen. Been looking all over the Internet but no luck finding the firmware for ZTE blade S7 t920. I haven't enable the USB debugging on the settings so my pc doesn't detect the phone
Not sure if you manage to sort out you problem yet but you can download a ROM from the ztedevice dot com website and copy the update.zip file to the root directory of your memory card then you do the following:
Forced upgrade (for the phones that cannot be started or the phones that cannot enter standby state)
1) For a powered-off phone, press and hold both the volume key + and power key to enter into Recovery mode.
2) Press the volume key - to select apply update from sdcard, and press the power key to confirm it.
3) Press the volume key - to select the update.zip file, and press the power key to confirm it. The phone completes the upgrade process in about three minutes.
4) On the Upgrade Complete screen, select reboot system now and press the power key to confirm it.
HELP! Blue Wave 8 33GT tablet stuck in recovery mode with "No command" message
I got my Blue Wave 8 33GT (not HD+) tablet completely bricked. First of all, I know this is not really a popular device and some of you might not have a single knowledge about this one, but I hope in any way you might help me get this device working again. Thank you in advance!
Some info about this device:
Bluewave's website: Wave 8
Android OS version: 4.4 KitKat
Device processor: Rockchip-based (RK31)
What just happened? It suddenly reboots while I'm playing and gone into recovery mode with an Android and a "No command." message. Now it won't boot the system anymore whenever I reboot, it always going into this recovery mode.
It has no volume buttons, just a reset, a hard back button and power button. Holding down the power and back button goes into the recovery mode directly. Through normal boot, it flashes the Bluewave logo twice then goes into the recovery. While the reset button immediately turn the device off. There's nothing else I can think of that I can do in this case.
My laptop can recognize it as an ADB Device in recovery mode and I think I may be able to flash it via Rockchip BatchTool, but the instructions I've read states that the device should be up and with a USB debugging enabled which I am not currently able to do in recovery mode. Device is rooted and working totally fine until this happened.
Anyone got into this kind of problem and able to go through it? Please, any help is greatly appreciated.
P.S
Just let me know if there are any additional info I could give you.
What about hard reset.
May be this link help: https://drfone.wondershare.com/reset-android/hard-reset-android-without-volume-buttons.html
AutomaticSearches said:
What about hard reset.
May be this link help: https://drfone.wondershare.com/reset-android/hard-reset-android-without-volume-buttons.html
Click to expand...
Click to collapse
Hey! Thanks for your reply and time.
I tried every combination of either of the two keys but there is no such recovery menu showing up, and I am pretty sure that this device doesn't have a built-in recovery for factory reset.
If only I could go to its download mode stuff to be able to flash the firmware...
Humble Potato II said:
Hey! Thanks for your reply and time.
I tried every combination of either of the two keys but there is no such recovery menu showing up, and I am pretty sure that this device doesn't have a built-in recovery for factory reset.
If only I could go to its download mode stuff to be able to flash the firmware...
Click to expand...
Click to collapse
May be this site help: http://bluewave-global.com/wave_8.php#frame4
"Long press the power button to restart the device. If restarting fails, hard reset the tablet by poking the Reset hole using a pin. " it is from FAQ
maybe this could help.
1. Press the power button to get the option menu for
Power off
Reboot
Silence phone option.
2. on that menu you have to hold down that power off option on your touch screen while also holding down the home push button on the side of your tablet.
3. This brings up a screen to reboot into safe mode..(these are the 3 steps the company does not tell you that is why no one gets it to work.
4. HIt yes for safe mode and then hold down your power and home buttons on side of tablet till the dopo Logo appears.
5. Release both buttons and hit the power button one time and then hold only the home button down till a menu option appears.
6. Use the home button to move down to factory reset and press the power button to select. Once it says complete then use the power button to select reboot.
Problem solved. Hope this will help everyone out.
The only way is to remove the battery, attached again the battery then power it on their is no hard reset on blue wave the go to settings factory reset
Hi
I have Asus Zenfone 2. It is stuck on android logo with red exclamation mark. I have tried to load the recovery mode but it does not work. The phone does not enter in recovery mode it just restarts and display same logo again. I do not have any authorized asus support nearby so I got it checked with some random tech guys. They said that they are unable to find firmware for that model.
Help Required
Hi if you are unable to enter into recovery (droid mode) try this:
Make sure your device is off if not press again long power button. Now press together Vol + and Power button at the same time , it will vibrate but don't release keys , once ASUS logo appear release both keys and fast press just Vol - button several times until you see USB logo and Droid Boot screen and do factory Reset . This should fix the problem , if not follow my completely post .Those files for FSTK I found inside old stock firmware in my case inside ifsw folder I think.
Post:
https://forum.xda-developers.com/android/help/asus-fonpad-7-fe170cg-bricked-stuck-t3740819
Stock firmware :
http://dlcdnet.asus.com/pub/ASUS/Ze...77.679749972.1518829604-1765041205.1518829604
Flash tool :
https://drive.google.com/file/d/0B9rp3AJHKJXjNmRuRUJMWmtOT3c/view
Raw Firmware for ASUS flah tool:
https://drive.google.com/file/d/0B3x4WC7bMXg3NHk0T09halRlNkE/view
If you need help , contact me back .
Thank you! I will try that
Hi everyone, I'm a new xda user.
I have a big problem with a Huawei Mediapad T3 7" BG2-U01.
My friend doesn't use it very often and he forgot the password.
The real problem is that seems like this tab doesn't have a recovery or a dload mode.
I tried all the combinations of the buttons but the recovery(MIUI), the dload mode and the chinese recovery don't work, there's only a reboot to the lockscreen.
He never enabled the Debug USB, so ADB and the pc don't see the device.
Is there any chance to unlock it or make a factory reset?
Thanks for helping me
Hard reset or Stock Recovery:
· off Tab
· Press power button for only 2 sec then release
· Immediately press hold volume up until Huawei logo appears